- 06 Dec, 2023 10 commits
-
-
Jakub Kicinski authored
Commit 1768d8a7 ("tools/net/ynl: Add support for create flags") added support for setting legacy netlink CRUD flags on netlink messages (NLM_F_REPLACE, _EXCL, _CREATE etc.). Most of genetlink won't need these, don't force callers to pass in an empty argument to each do() call. Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231202211005.341613-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Uwe Kleine-König says: ==================== net*: Convert to platform remove callback returning void (implicit) v1 of this series can be found at https://lore.kernel.org/netdev/20231117095922.876489-1-u.kleine-koenig@pengutronix.de. Changes since then: - Dropped patch #1 as Alex objected. Patch #1 (was #2 before) now converts ipa to remove_new() and introduces an error message in the error path that failed before. ==================== Link: https://lore.kernel.org/r/cover.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Reviewed-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20231117095922.876489-9-u.kleine-koenig@pengutronix.deSigned-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/49795ee930be6a9a24565e5e7133e6f8383ab532.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-8-u.kleine-koenig@pengutronix.deSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/b0488fa6181a47668e5737905ae7adc8d7cd055e.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-7-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-6-u.kleine-koenig@pengutronix.deSigned-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/7c1d50d559c0e0e36a20eb3e410f6e9d3f884b6f.1701713943.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231117095922.876489-5-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20231117095922.876489-3-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Arnd Bergmann authored
This function exceeds the stack frame warning limit: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pri': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:1039:1: error: the frame size of 1408 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Use dynamic allocation for the largest stack object instead. It would be nice to rewrite this file to completely avoid the extra buffer and just use the one that was already allocated by debugfs, but that is a much larger change. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231204085735.4112882-1-arnd@kernel.orgSigned-off-by:
-
- 05 Dec, 2023 30 commits
-
-
Jakub Kicinski authored
The ynl-generated user space C code is already above 25kLoC and is growing. The initial reason to commit these files was to make reviewing changes to the generator easier. Unfortunately, it has the opposite effect on reviewing changes to specs, and we get far more changes to specs than to the generator. Uncommit those fails, as they are generated on the fly as needed. netdev patchwork now runs a script on each series to create a diff of generated code on the fly, for the rare cases when looking at it is helpful: https://github.com/kuba-moo/nipa/blob/master/tests/series/ynl/ynl.shSuggested-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Jakub Kicinski authored
Alex Austin says: ==================== sfc: Implement ndo_hwtstamp_(get|set) Implement ndo_hwtstamp_get and ndo_hwtstamp_set for sfc and sfc-siena. ==================== Link: https://lore.kernel.org/r/20231130135826.19018-1-alex.austin@amd.comSigned-off-by:
-
Alex Austin authored
Update efx->ptp_data to use kernel_hwtstamp_config and implement ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from efx_ioctl. Signed-off-by:
Alex Austin <alex.austin@amd.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231130135826.19018-3-alex.austin@amd.comSigned-off-by:
-
Alex Austin authored
Update efx->ptp_data to use kernel_hwtstamp_config and implement ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from efx_ioctl. Signed-off-by:
-
Zhengchao Shao authored
The .parse_protocol hook function in the ipvlan_header_ops structure is not implemented. As a result, when the AF_PACKET family is used to send packets, skb->protocol will be set to 0. Ipvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use eth_header_parse_protocol function to obtain the protocol. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231202130438.2266343-1-shaozhengchao@huawei.comSigned-off-by:
-
Zhengchao Shao authored
The .parse_protocol hook function in the macvlan_header_ops structure is not implemented. As a result, when the AF_PACKET family is used to send packets, skb->protocol will be set to 0. Macvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use eth_header_parse_protocol function to obtain the protocol. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Paolo Abeni authored
Hangbin Liu says: ==================== Conver net selftests to run in unique namespace (Part 1) As Guillaume pointed, many selftests create namespaces with very common names (like "client" or "server") or even (partially) run directly in init_net. This makes these tests prone to failure if another namespace with the same name already exists. It also makes it impossible to run several instances of these tests in parallel. This patch set intend to conver all the net selftests to run in unique namespace, so we can update the selftest freamwork to run all tests in it's own namespace in parallel. After update, we only need to wait for the test which need longest time. As the total patch set is too large. I break it to severl parts. This is the first part. v2 -> v3: - Convert all ip netns del to cleanup_ns (Justin Iurman) v1 -> v2: - Split the large patch set to small parts for easy review (Paolo Abeni) - Move busywait from forwarding/lib.sh to net/lib.sh directly (Petr Machata) - Update setup_ns/cleanup_ns struct (Petr Machata) - Remove default trap in lib.sh (Petr Machata) ==================== Link: https://lore.kernel.org/r/20231202020110.362433-1-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. # ./unicast_extensions.sh /usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin) ########################################################################### Unicast address extensions tests (behavior of reserved IPv4 addresses) ########################################################################### TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ] TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ] TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ] ... TEST: assign and ping class D address (is forbidden) [ OK ] TEST: routing using class D (is forbidden) [ OK ] TEST: routing using 127/8 (is forbidden) [ OK ] Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./sctp_vrf.sh Testing For SCTP VRF: TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS] ... TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS] ***v6 Tests Done*** Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./ndisc_unsolicited_na_test.sh TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=1 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=1 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=1 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=0 [ OK ] TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=1 [ OK ] Tests passed: 8 Tests failed: 0 Acked-by: -
Hangbin Liu authored
Here is the test result after conversion. ]# ./l2tp.sh TEST: IPv4 basic L2TP tunnel [ OK ] TEST: IPv4 route through L2TP tunnel [ OK ] TEST: IPv6 basic L2TP tunnel [ OK ] TEST: IPv6 route through L2TP tunnel [ OK ] TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv4 basic L2TP tunnel [ OK ] TEST: IPv4 route through L2TP tunnel [ OK ] TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ] TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ] TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ] TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ] Tests passed: 16 Tests failed: 0 Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./ioam6.sh -------------------------------------------------------------------------- OUTPUT tests -------------------------------------------------------------------------- TEST: Unknown IOAM namespace (inline mode) [ OK ] TEST: Unknown IOAM namespace (encap mode) [ OK ] TEST: Missing trace room (inline mode) [ OK ] TEST: Missing trace room (encap mode) [ OK ] TEST: Trace type with bit 0 only (inline mode) [ OK ] ... TEST: Full supported trace (encap mode) [ OK ] -------------------------------------------------------------------------- GLOBAL tests -------------------------------------------------------------------------- TEST: Forward - Full supported trace (inline mode) [ OK ] TEST: Forward - Full supported trace (encap mode) [ OK ] - Tests passed: 88 - Tests failed: 0 Acked-by:
Justin Iurman <justin.iurman@uliege.be> Signed-off-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./icmp.sh OK Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. # ./icmp_redirect.sh ########################################################################### Legacy routing ########################################################################### TEST: IPv4: redirect exception [ OK ] ... TEST: IPv4: mtu exception plus redirect [ OK ] TEST: IPv6: mtu exception plus redirect [ OK ] Tests passed: 40 Tests failed: 0 Tests xfailed: 0 Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./traceroute.sh TEST: IPV6 traceroute [ OK ] TEST: IPV4 traceroute [ OK ] Tests passed: 2 Tests failed: 0 Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. ]# ./drop_monitor_tests.sh Software drops test TEST: Capturing active software drops [ OK ] TEST: Capturing inactive software drops [ OK ] Hardware drops test TEST: Capturing active hardware drops [ OK ] TEST: Capturing inactive hardware drops [ OK ] Tests passed: 4 Tests failed: 0 Acked-by: -
Hangbin Liu authored
Here is the test result after conversion. ]# ./cmsg_ipv6.sh OK ]# ./cmsg_so_mark.sh OK ]# ./cmsg_time.sh OK Acked-by:
-
Hangbin Liu authored
Here is the test result after conversion. 2 tests also failed without this patch ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ] TEST: test_ndisc: accept_untracked_na=0 [ OK ] TEST: test_ndisc: accept_untracked_na=1 [ OK ] TEST: test_ndisc: accept_untracked_na=2 same_subnet=0 [ OK ] TEST: test_ndisc: accept_untracked_na=2 same_subnet=1 [ OK ] Acked-by: -
Hangbin Liu authored
When do arping, the interface need to be specified. Or we will get error: Interface "lo" is not ARPable. And the test failed. ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [FAIL] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL] After fix: ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ] Fixes: 0ea7b0a4 ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na") Signed-off-by: -
Hangbin Liu authored
Here is the test result after conversion. ]# ./arp_ndisc_evict_nocarrier.sh run arp_evict_nocarrier=1 test ok run arp_evict_nocarrier=0 test ok run all.arp_evict_nocarrier=0 test ok run ndisc_evict_nocarrier=1 test ok run ndisc_evict_nocarrier=0 test ok run all.ndisc_evict_nocarrier=0 test ok Acked-by:
-
Hangbin Liu authored
Add a lib.sh for net selftests. This file can be used to define commonly used variables and functions. Some commonly used functions can be moved from forwarding/lib.sh to this lib file. e.g. busywait(). Add function setup_ns() for user to create unique namespaces with given prefix name. Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Paolo Abeni authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-01 (ice) This series contains updates to ice driver only. Konrad provides temperature reporting via hwmon. Arkadiusz adds reporting of Clock Generation Unit (CGU) information via devlink info. Pawel adjusts error messaging for ntuple filters to account for additional possibility for encountering an error. Karol ensures that all timestamps occurring around reset are processed and renames some E822 functions to convey additional usage for E823 devices. Jake provides mechanism to ensure that all timestamps on E822 devices are processed. The following are changes since commit 15bc8121: octeon_ep: set backpressure watermark for RX queues and are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE ==================== Link: https://lore.kernel.org/r/20231201180845.219494-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Karol Kolacinski authored
When code is applicable for both E822 and E823 devices, rename it from E822 to E82X. ICE_PHY_PER_NAC_E822 was unused, so just remove it. Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Jacob Keller authored
The E822 hardware for Tx timestamping keeps track of how many outstanding timestamps are still in the PHY memory block. It will not generate a new interrupt to the MAC until all of the timestamps in the region have been read. If somehow all the available data is not read, but the driver has exited its interrupt routine already, the PHY will not generate a new interrupt even if new timestamp data is captured. Because no interrupt is generated, the driver never processes the timestamp data. This state results in a permanent failure for all future Tx timestamps. It is not clear how the driver and hardware could enter this state. However, if it does, there is currently no recovery mechanism. Add a recovery mechanism via the periodic PTP work thread which invokes ice_ptp_periodic_work(). Introduce a new check, ice_ptp_maybe_trigger_tx_interrupt() which checks the PHY timestamp ready bitmask. If any bits are set, trigger a software interrupt by writing to PFINT_OICR. Once triggered, the main timestamp processing thread will read through the PHY data and clear the outstanding timestamp data. Once cleared, new data should trigger interrupts as expected. This should allow recovery from such a state rather than leaving the device in a state where we cannot process Tx timestamps. It is possible that this function checks for timestamp data simultaneously with the interrupt, and it might trigger additional unnecessary interrupts. This will cause a small amount of additional processing. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Andrii Staikov <andrii.staikov@intel.com> Reviewed-by:
-
Karol Kolacinski authored
During reset, TX_TSYN interrupt should be processed as it may process timestamps in brief moments before and after reset. Timestamping should be enabled on VSIs at the end of reset procedure. On ice_get_phy_tx_tstamp_ready error, interrupt should not be rearmed because error only happens on resets. Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Pawel Kaminski authored
Supported number of ntuple filters affect also maximum location value that can be provided to ethtool command. Update error message to provide info about max supported value. Fix double spaces in the error messages. Reviewed-by:
Pawel Kaminski <pawel.kaminski@intel.com> Reviewed-by:
-
Arkadiusz Kubalewski authored
If Clock Generation Unit is present on NIC board user shall know its details. Provide the devlink info callback with a new: - fixed type object (cgu.id) indicating hardware variant of onboard CGU, - running type object (fw.cgu) consisting of CGU id, config and firmware versions. These information shall be known for debugging purposes. Test (on NIC board with CGU) $ devlink dev info <bus_name>/<dev_name> | grep cgu cgu.id 36 fw.cgu 8032.16973825.6021 Test (on NIC board without CGU) $ devlink dev info <bus_name>/<dev_name> | grep cgu -c 0 Reviewed-by:Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Konrad Knitter authored
Since 4.30 firmware exposes internal thermal sensor reading via admin queue commands. Expose those readouts via hwmon API when supported. Datasheet: Get Sensor Reading Command (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer. | | Return value | 6-7 | | Return value. | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor | 16 | | 0x00: Internal temp | | | | | 0x01-0xFF: Reserved. | | Format | 17 | Requested response | Only 0x00 is supported. | | | | format | 0x01-0xFF: Reserved. | | Reserved | 18-23 | | | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Get Sensor Reading Response (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer | | Return value | 6-7 | | Return value. | | | | | EINVAL: Invalid | | | | | parameters | | | | | ENOENT: Unsupported | | | | | sensor | | | | | EIO: Sensor access | | | | | error | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor Reading | 16-23 | | Format of the reading | | | | | is dependent on request | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Sensor Reading for Sensor 0x00 (Internal Chip Temperature): +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Thermal Sensor | 0 | | Reading in degrees | | reading | | | Celsius. Signed int8 | | Warning High | 1 | | Warning High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Critical High | 2 | | Critical High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Fatal High | 3 | | Fatal High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Reserved | 4-7 | | | +--------------------+--------+--------------------+-------------------------+ Driver provides current reading from HW as well as device specific thresholds for thermal alarm (Warning, Critical, Fatal) events. $ sensors Output ========================================================= ice-pci-b100 Adapter: PCI adapter temp1: +62.0°C (high = +95.0°C, crit = +105.0°C) (emerg = +115.0°C) Tested on Intel Corporation Ethernet Controller E810-C for SFP Co-developed-by:Marcin Domagala <marcinx.domagala@intel.com> Signed-off-by:
Eric Joyner <eric.joyner@intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Paolo Abeni authored
Pedro Tammela says: ==================== net/sched: act_api: contiguous action arrays When dealing with action arrays in act_api it's natural to ask if they are always contiguous (no NULL pointers in between). Yes, they are in all cases so far, so make use of the already present tcf_act_for_each_action macro to explicitly document this assumption. There was an instance where it was not, but it was refactorable (patch 2) to make the array contiguous. v1->v2: - Respin - Added Jamal's acked-by ==================== Link: https://lore.kernel.org/r/20231201175015.214214-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
The actions array is contiguous, so stop processing whenever a NULL is found. This is already the assumption for tcf_action_destroy[1], which is called from tcf_actions_init. [1] https://elixir.bootlin.com/linux/v6.7-rc3/source/net/sched/act_api.c#L1115Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
