- 05 Feb, 2019 19 commits
-
-
Colin Ian King authored
There are several issues with badly indented statements. Fix these and clean up the formatting. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Damien Le Moal authored
There is no need to call twice string_get_size() when the capacity messages are not going to be printed. Reverse the message output condition to return early and avoid executing string_get_size() when it is not necessary. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Stanley Chu authored
uic errors are currently printed out of time order. Make things more readable by printing logs in time order, and printing "No record" if history is empty. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Tested-by:
-
Bart Van Assche authored
Treat text_in and padding as a single buffer instead of two buffers. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Use a single loop to dump immediate data, padding and digest instead of using separate rx_data() calls for each type of data. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
When using SCSI passthrough in combination with the iSCSI target driver then cmd->t_state_lock may be obtained from interrupt context. Hence, all code that obtains cmd->t_state_lock from thread context must disable interrupts first. This patch avoids that lockdep reports the following: WARNING: inconsistent lock state 4.18.0-dbg+ #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod] {HARDIRQ-ON-W} state was registered at: lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod] iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 irq event stamp: 1281 hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160 hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0 softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0 softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cmd->t_state_lock)->rlock); <Interrupt> lock(&(&cmd->t_state_lock)->rlock); *** DEADLOCK *** 3 locks held by iscsi_ttx/1800: *0: 00000000c3b711b7 (sk_lock-AF_INET6){+.+.}, at: tcp_sendmsg+0x1e/0x50 *1: 00000000fa81046f (rcu_read_lock){....}, at: inet6_csk_xmit+0xc7/0x2e0 [ipv6] *2: 00000000c091d70d (rcu_read_lock_bh){....}, at: ip6_finish_output2+0x124/0xe40 [ipv6] stack backtrace: CPU: 0 PID: 1800 Comm: iscsi_ttx Not tainted 4.18.0-dbg+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: <IRQ> dump_stack+0xa4/0xf5 print_usage_bug+0x25b/0x27b mark_lock+0x70f/0x7b0 __lock_acquire+0xbc2/0x1b50 lock_acquire+0xd2/0x260 _raw_spin_lock_irqsave+0x4a/0x60 target_complete_cmd+0x47/0x2c0 [target_core_mod] target_complete_cmd_with_length+0x70/0xa0 [target_core_mod] pscsi_req_done+0x335/0x530 [target_core_pscsi] __blk_mq_end_request+0xa5/0x140 scsi_end_request+0x112/0x320 [scsi_mod] scsi_io_completion+0x183/0xa30 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] __blk_mq_complete_request_remote+0x2f/0x40 flush_smp_call_function_queue+0x12a/0x220 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x7a/0x350 call_function_single_interrupt+0xf/0x20 </IRQ> RIP: 0010:__asan_load4+0x1e/0x80 debug_lockdep_rcu_enabled+0x26/0x40 ip6_finish_output2+0x15a/0xe40 [ipv6] ip6_finish_output+0x308/0x440 [ipv6] ip6_output+0x11d/0x3b0 [ipv6] ip6_xmit+0x639/0xc50 [ipv6] inet6_csk_xmit+0x198/0x2e0 [ipv6] __tcp_transmit_skb+0xc1b/0x15b0 tcp_write_xmit+0x42e/0x1f20 __tcp_push_pending_frames+0x59/0x150 tcp_push+0x189/0x270 tcp_sendmsg_locked+0x7b9/0x1680 tcp_sendmsg+0x2c/0x50 inet_sendmsg+0x71/0x250 sock_sendmsg+0x4c/0x60 tx_data+0x12b/0x1f0 [iscsi_target_mod] iscsit_send_tx_data+0x77/0xe0 [iscsi_target_mod] iscsit_xmit_pdu+0x2c5/0x740 [iscsi_target_mod] iscsit_response_queue+0x941/0xd40 [iscsi_target_mod] iscsi_target_tx_thread+0x23b/0x350 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Fixes: 064cdd2d ("target: Fix race between iscsi-target connection shutdown + ABORT_TASK") Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: -
Bart Van Assche authored
Having both a function and a function pointer member with the same name (iscsit_release_cmd) is confusing. Hence rename the function pointer member. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
Change "unsoliticed" into "unsolicited". Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Bart Van Assche authored
Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
The single iscsit_start_nopin_response_timer() caller does not hold any locks. Hence remove the comment above this function. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
Make sure that the next time a response is sent to the initiator that the credit it had allocated for the aborted request gets freed. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Fixes: 131e6abc ("target: Add TFO->abort_task for aborted task resources release") # v3.15 Signed-off-by:
-
Bart Van Assche authored
Instead of maintaining a list of free I/O contexts, use an sbitmap data structure to track which I/O contexts are in use and which are free. This makes the ib_srpt driver more consistent with other LIO drivers. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
If submitting a TMF to the target core fails, send the "FUNCTION REJECTED" response to the initiator. Reviewed-by:
Hannes Reinecke <hare@suse.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
If submitting an SRP IU to the target core fails, send the SCSI response "BUSY" to the initiator instead of not sending any response. Reviewed-by:
-
Bart Van Assche authored
Introduce a function that sends the SCSI status "BUSY" back to the initiator. The next patch will add a call to this function in the srpt target driver. Reviewed-by:
-
Bart Van Assche authored
Remove the code that clears .se_lun from transport_cmd_check_stop_to_fabric() such that the transport_lun_remove_cmd() call can be moved into target_release_cmd_kref(). Because this guarantees that transport_lun_remove_cmd() will be called exactly once, it is safe to change the cmpxchg() call into a test of se_cmd.lun_ref_active. Inline transport_lun_remove_cmd() because it is not worth to keep it as a separate function. Reviewed-by:
-
Bart Van Assche authored
Due to the task management handling rework it is safe to wait for a TMF that is not in the active state. Hence remove the CMD_T_ACTIVE test from core_tmr_drain_tmr_list(). Additionally, call __target_check_io_state() instead of open coding it. Reviewed-by:
-
Bart Van Assche authored
Whether or not a session is being torn down does not affect whether or not SCSI commands are in the task set. Hence remove the "tearing down" checks from the TMF code. The TRANSPORT_ISTATE_PROCESSING check is left out because it is now safe to wait for a command that is in that state. The CMD_T_PRE_EXECUTE is left out because abort processing is postponed until after commands have left the pre-execute state since the patch that makes TMF processing synchronous. See also commit 1c21a480 ("target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK"). Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
Due to the patch that makes TMF handling synchronous the write_pending_status() callback function is no longer called. Hence remove it. Acked-by:
Felipe Balbi <balbi@ti.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
Andy Grover <agrover@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by:
-
- 01 Feb, 2019 2 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/csiostor/csio_attr.c: In function 'csio_fcoe_free_vnp': drivers/scsi/csiostor/csio_attr.c:500:21: warning: variable 'pln' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Giridhar Malavali authored
This patch adds new BIT detection to enable FC-NVMe feature in the driver. [mkp: fixed Giridhar's SoB] Signed-off-by:
Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
- 29 Jan, 2019 19 commits
-
-
John Garry authored
This call must have been missed when I reworked the debugfs feature for upstreaming, so add it back. Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
John Garry authored
A NULL-pointer dereference was introduced for TMF SSP commands from the upstreaming reworking. Fix this by relocating the scsi_get_prot_op() callsite. Fixes: d6a9000b ("scsi: hisi_sas: Add support for DIF feature for v2 hw") Signed-off-by:
-
John Garry authored
Sparse detected some problems in the driver, so tidy them up. Signed-off-by:
-
Luo Jiaxing authored
Some sizes we allocate for debugfs structure are incorrect, so fix them. Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
Hot-plugging SAS wire of direct hard disk backplane may cause disk lost. We have done this test with several types of SATA disk from different venders, and only two models from Seagate has this problem, ST4000NM0035-1V4107 and ST3000VM002-1ET166. The root cause is that the disk doesn't send D2H frame after OOB finished. SAS controller will issue phyup interrupt only when D2H frame is received, otherwise, will be waiting there all the time. When this issue happen, we can find the disk again with link reset. To fix this issue, we setup an timer after OOB finished. If the PHY is not up in 20s, do link reset. Notes: the 20s is an experience value. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
The SAS controller cannot support a programmed minimum linkrate of > 1.5G (it will always negotiate to 1.5G at least), so just reject it. This solves a strange situation where the PHY negotiated linkrate may be less than the programmed minimum linkrate. Signed-off-by:
-
Xiang Chen authored
In function hisi_sas_alloc(), parameter shost is not used, so remove it. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiang Chen authored
When issing a hardreset to a SATA device when running IO, it is possible that abnormal CQs of the device are returned. Then enter error handler, it doesn't enter function hisi_sas_abort_task() as there is no timeout IO, and it doesn't set device as HISI_SAS_DEV_EH. So when hardreset by libata later, it actually doesn't issue hardreset as there is a check to judge whether device is in error. For this situation, actually need to hardreset the device to recover. So remove the check of sas_dev status in hisi_sas_I_T_nexus_reset(). Before we add the check to avoid the endless loop of reset for directly-attached SATA device at probe time, actually we flutter it for it, so it is not necessary to add the check now. Signed-off-by:
-
Xiang Chen authored
When injecting 2 bit ECC error, it will cause fatal AXI interrupts. Before the recovery of SAS controller reset, the internal of SAS controller is in error. If CQ interrupts return at the time, actually it is exception CQ interrupt, and it may cause resource release in disorder. To avoid the exception situation, shutdown AXI bus after fatal AXI interrupt. In SAS controller reset, it will restart AXI bus. For later version of v3 hw, hardware will shutdown AXI bus for this situation, so just fix current ver of v3 hw. Signed-off-by:
-
Xiang Chen authored
Send primitive NOTIFY to SSP situation only, or it causes underflow issue when sending IO. Also rename hisi_sas_hw.sl_notify() to hisi_sas_hw. sl_notify_ssp(). Signed-off-by:
-
Luo Jiaxing authored
This patch creates debugfs file for ITCT and adds file operations. Signed-off-by:
-
John Garry authored
Sparse can detect some type casting issues in the debugfs code, so fix it up. Also a missing static qualifier is added to hisi_sas_debugfs_to_reg_name(). Signed-off-by:
-
John Garry authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/scsi/pcmcia/nsp_cs.c:1137:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) { ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/pcmcia/nsp_cs.c:1137:27: note: remove extraneous parentheses around the comparison to silence this warning if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) { ~ ^ ~ drivers/scsi/pcmcia/nsp_cs.c:1137:27: note: use '=' to turn this equality comparison into an assignment if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) { ^~ = 1 warning generated. Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/scsi/nsp32.c:2444:14: warning: explicitly assigning value of variable of type 'unsigned char' to itself [-Wself-assign] offset = offset; ~~~~~~ ^ Signed-off-by:GOTO Masanori <gotom@debian.or.jp> Signed-off-by:
-
Masahiro Yamada authored
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
I was able to build without these extra header search paths. Especially, the header search path -I. in kernel Makefiles is always suspicious; it allows the compiler to search for headers in the top of $(srctree), where obviously no header file exists. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/fnic/vnic_wq.c: In function 'vnic_wq_alloc_bufs': drivers/scsi/fnic/vnic_wq.c:50:19: warning: variable 'vdev' set but not used [-Wunused-but-set-variable] drivers/scsi/fnic/vnic_rq.c: In function 'vnic_rq_alloc_bufs': drivers/scsi/fnic/vnic_rq.c:30:19: warning: variable 'vdev' set but not used [-Wunused-but-set-variable] Never used since introduction. Signed-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
-
Bart Van Assche authored
Since the READ(6) and WRITE(6) commands interpret a zero in the transfer length field in the CDB as 256 logical blocks, avoid submitting such commands. Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Reported-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
