- 05 Apr, 2013 28 commits
-
-
Vivek Gautam authored
commit 1c11a172 upstream. Use proper macro while extracting TRB transfer length from Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23) for the same, and use it instead of TRB_LEN (bits 0:16) in case of event TRBs. This patch should be backported to kernels as old as 2.6.31, that contain the commit b10de142 "USB: xhci: Bulk transfer support". This patch will have issues applying to older kernels. Signed-off-by:
Vivek gautam <gautam.vivek@samsung.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 896ee0ee upstream. This makes sure that release_sock is called for all error conditions in irda_getsockopt. Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Brad Spengler <spender@grsecurity.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
fanchaoting authored
commit 4376c946 upstream. when pnfs block using device mapper,if umounting later,it maybe cause oops. we apply "1 + sizeof(bl_umount_request)" memory for msg->data, the memory maybe overflow when we do "memcpy(&dataptr [sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))", because the size of bl_msg is more than 1 byte. Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Bing Zhao authored
commit 084c7189 upstream. curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Tested-by:
Marco Cesarano <marco@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Al Viro authored
commit e8cd8169 upstream. vcs_poll_data_free() calls unregister_vt_notifier(), which calls atomic_notifier_chain_unregister(), which calls synchronize_rcu(). Do it *after* we'd dropped ->f_lock. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Konstantin Holoborodko authored
commit 482b0b5d upstream. It enhances the driver for FTDI-based USB serial adapters to recognize Mitsubishi Electric Corp. USB/RS422 Converters as FT232BM chips and support them. https://search.meau.com/?q=FX-USB-AWSigned-off-by:
Konstantin Holoborodko <klh.kernel@gmail.com> Tested-by:
-
Pawel Wieczorkiewicz authored
commit 503bded9 upstream. Index of atmel_ports[ATMEL_MAX_UART] should be smaller than ATMEL_MAX_UART. Signed-off-by:
Pawel Wieczorkiewicz <wpawel@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Jan Beulich authored
commit 0e5e098a upstream. Commit 77089926 ("xen/blkback: Seperate the bio allocation and the bio submission") consolidated the pendcnt updates to just a single write, neglecting the fact that the error path relied on it getting set to 1 up front (such that the decrement in __end_block_io_op() would actually drop the count to zero, triggering the necessary cleanup actions). Also remove a misleading and a stale (after said commit) comment. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
David Vrabel authored
commit 0e367ae4 upstream. If the frontend is using a non-native protocol (e.g., a 64-bit frontend with a 32-bit backend) and it sent an unrecognized request, the request was not translated and the response would have the incorrect ID. This may cause the frontend driver to behave incorrectly or crash. Since the ID field in the request is always in the same place, regardless of the request type we can get the correct ID and make a valid response (which will report BLKIF_RSP_EOPNOTSUPP). This bug affected 64-bit SLES 11 guests when using a 32-bit backend. This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES source) and would crash in blkif_int() as the ID in the response would be invalid. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Joerg Roedel authored
commit c2a2876e upstream. There is a bug introduced with commit 27c2127 that causes devices which are hot unplugged and then hot-replugged to not have per-device dma_ops set. This causes these devices to not function correctly. Fixed with this patch. Reported-by:
Andreas Degert <andreas.degert@googlemail.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Kees Cook authored
commit 715230a4 upstream. Commit 184b8904 ("tg3: Use VPD fw version when present") introduced VPD parsing that contained a potential length overflow. Limit the hardware's reported firmware string length (max 255 bytes) to stay inside the driver's firmware string length (32 bytes). On overflow, truncate the formatted firmware string instead of potentially overwriting portions of the tg3 struct. http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdfSigned-off-by:
Oded Horovitz <oded@privatecore.com> Reported-by:
-
Rafał Miłecki authored
commit 2e1253d6 upstream. When calculating "offset" for final RSSI calibration we're using numbers bigger than s8 can hold. We have for example: offset[j] = 232 - poll_results[j]; formula. If poll_results[j] is small enough (it usually is) we treat number's bit as a sign bit. For example 232 - 1 becomes: 0xE8 - 0x1 = 0xE7, which is not 231 but -25. This code was introduced in e0c9a021 and caused stability regression on some cards, for ex. BCM4322. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Iestyn C. Elfick authored
commit b251412d upstream. Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by:
Chris Vine <chris@cvine.freeserve.co.uk> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Rafał Miłecki authored
commit e67dd874 upstream. We're using "mind" variable to find the VCM that got the best polling results. For each VCM we calculte "currd" which is compared to the "mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a value smaller than 40 makes no sense, so increase the initial value. This fixes a regression introduced in 3.4 by commit: e0c9a021 (my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s) Signed-off-by:
-
Jussi Kivilinna authored
commit 36ef0b47 upstream. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by:
-
Josh Boyer authored
commit 3d464d9b upstream. This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Felix Fietkau authored
commit 74632d11 upstream. The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Reported-by:
Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by:
-
Marc Kleine-Budde authored
commit f901b6bc upstream. Thias patch fixes a define conflict between the SH architecture and the sja1000 driver: drivers/net/can/sja1000/sja1000.h:59:0: warning: "REG_SR" redefined [enabled by default] arch/sh/include/asm/ptrace_32.h:25:0: note: this is the location of the previous definition A SJA1000_ prefix is added to the offending sja1000 define only, to make a minimal patch suited for stable. A later patch will add a SJA1000_ prefix to all defines in sja1000.h. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ming Lei authored
commit e5110f41 upstream. In case of 'if (filp->f_pos == 0 or 1)' of sysfs_readdir(), the failure from filldir() isn't handled, and the reference counter of the sysfs_dirent object pointed by filp->private_data will be released without clearing filp->private_data, so use after free bug will be triggered later. This patch returns immeadiately under the situation for fixing the bug, and it is reasonable to return from readdir() when filldir() fails. Reported-by:
Dave Jones <davej@redhat.com> Tested-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Ming Lei authored
commit 991f76f8 upstream. While readdir() is running, lseek() may set filp->f_pos as zero, then may leave filp->private_data pointing to one sysfs_dirent object without holding its reference counter, so the sysfs_dirent object may be used after free in next readdir(). This patch holds inode->i_mutex to avoid the problem since the lock is always held in readdir path. Reported-by:
-
Ian Abbott authored
commit e4317ce8 upstream. For the s626 driver, there is a bug in the handling of asynchronous commands on the AI subdevice when the stop source is `TRIG_NONE`. The command should run continuously until cancelled, but the interrupt handler stops the command running after the first scan. The command set-up function `s626_ai_cmd()` contains this code: switch (cmd->stop_src) { case TRIG_COUNT: /* data arrives as one packet */ devpriv->ai_sample_count = cmd->stop_arg; devpriv->ai_continous = 0; break; case TRIG_NONE: /* continous acquisition */ devpriv->ai_continous = 1; devpriv->ai_sample_count = 0; break; } The interrupt handler `s626_irq_handler()` contains this code: if (!(devpriv->ai_continous)) devpriv->ai_sample_count--; if (devpriv->ai_sample_count <= 0) { devpriv->ai_cmd_running = 0; /* ... */ } So `devpriv->ai_sample_count` is only decremented for the `TRIG_COUNT` case, but `devpriv->ai_cmd_running` is set to 0 (and the command stopped) regardless. Fix this in `s626_ai_cmd()` by setting `devpriv->ai_sample_count = 1` for the `TRIG_NONE` case. The interrupt handler will not decrement it so it will remain greater than 0 and the check for stopping the acquisition will fail. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ming Lei authored
commit ebaf5795 upstream. Add support for the AR9462 chip T: Bus=03 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=817a Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Ming Lei authored
commit d66629c1 upstream. Add support for the AR9462 chip T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=0036 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Vinicius Costa Gomes authored
commit eb20ff9c upstream. With deferred setup for SCO, it is possible that userspace closes the socket when it is in the BT_CONNECT2 state, after the Connect Request is received but before the Accept Synchonous Connection is sent. If this happens the following crash was observed, when the connection is terminated: [ +0.000003] hci_sync_conn_complete_evt: hci0 status 0x10 [ +0.000005] sco_connect_cfm: hcon ffff88003d1bd800 bdaddr 40:98:4e:32:d7:39 status 16 [ +0.000003] sco_conn_del: hcon ffff88003d1bd800 conn ffff88003cc8e300, err 110 [ +0.000015] BUG: unable to handle kernel NULL pointer dereference at 0000000000000199 [ +0.000906] IP: [<ffffffff810620dd>] __lock_acquire+0xed/0xe82 [ +0.000000] PGD 3d21f067 PUD 3d291067 PMD 0 [ +0.000000] Oops: 0002 [#1] SMP [ +0.000000] Modules linked in: rfcomm bnep btusb bluetooth [ +0.000000] CPU 0 [ +0.000000] Pid: 1481, comm: kworker/u:2H Not tainted 3.9.0-rc1-25019-gad82cdd1 #1 Bochs Bochs [ +0.000000] RIP: 0010:[<ffffffff810620dd>] [<ffffffff810620dd>] __lock_acquire+0xed/0xe82 [ +0.000000] RSP: 0018:ffff88003c3c19d8 EFLAGS: 00010002 [ +0.000000] RAX: 0000000000000001 RBX: 0000000000000246 RCX: 0000000000000000 [ +0.000000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003d1be868 [ +0.000000] RBP: ffff88003c3c1a98 R08: 0000000000000002 R09: 0000000000000000 [ +0.000000] R10: ffff88003d1be868 R11: ffff88003e20b000 R12: 0000000000000002 [ +0.000000] R13: ffff88003aaa8000 R14: 000000000000006e R15: ffff88003d1be850 [ +0.000000] FS: 0000000000000000(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 [ +0.000000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ +0.000000] CR2: 0000000000000199 CR3: 000000003c1cb000 CR4: 00000000000006b0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ +0.000000] Process kworker/u:2H (pid: 1481, threadinfo ffff88003c3c0000, task ffff88003aaa8000) [ +0.000000] Stack: [ +0.000000] ffffffff81b16342 0000000000000000 0000000000000000 ffff88003d1be868 [ +0.000000] ffffffff00000000 00018c0c7863e367 000000003c3c1a28 ffffffff8101efbd [ +0.000000] 0000000000000000 ffff88003e3d2400 ffff88003c3c1a38 ffffffff81007c7a [ +0.000000] Call Trace: [ +0.000000] [<ffffffff8101efbd>] ? kvm_clock_read+0x34/0x3b [ +0.000000] [<ffffffff81007c7a>] ? paravirt_sched_clock+0x9/0xd [ +0.000000] [<ffffffff81007fd4>] ? sched_clock+0x9/0xb [ +0.000000] [<ffffffff8104fd7a>] ? sched_clock_local+0x12/0x75 [ +0.000000] [<ffffffff810632d1>] lock_acquire+0x93/0xb1 [ +0.000000] [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth] [ +0.000000] [<ffffffff8105f3d8>] ? lock_release_holdtime.part.22+0x4e/0x55 [ +0.000000] [<ffffffff814f6038>] _raw_spin_lock+0x40/0x74 [ +0.000000] [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth] [ +0.000000] [<ffffffff814f6936>] ? _raw_spin_unlock+0x23/0x36 [ +0.000000] [<ffffffffa0022339>] spin_lock+0x9/0xb [bluetooth] [ +0.000000] [<ffffffffa00230cc>] sco_conn_del+0x76/0xbb [bluetooth] [ +0.000000] [<ffffffffa002391d>] sco_connect_cfm+0x2da/0x2e9 [bluetooth] [ +0.000000] [<ffffffffa000862a>] hci_proto_connect_cfm+0x38/0x65 [bluetooth] [ +0.000000] [<ffffffffa0008d30>] hci_sync_conn_complete_evt.isra.79+0x11a/0x13e [bluetooth] [ +0.000000] [<ffffffffa000cd96>] hci_event_packet+0x153b/0x239d [bluetooth] [ +0.000000] [<ffffffff814f68ff>] ? _raw_spin_unlock_irqrestore+0x48/0x5c [ +0.000000] [<ffffffffa00025f6>] hci_rx_work+0xf3/0x2e3 [bluetooth] [ +0.000000] [<ffffffff8103efed>] process_one_work+0x1dc/0x30b [ +0.000000] [<ffffffff8103ef83>] ? process_one_work+0x172/0x30b [ +0.000000] [<ffffffff8103e07f>] ? spin_lock_irq+0x9/0xb [ +0.000000] [<ffffffff8103fc8d>] worker_thread+0x123/0x1d2 [ +0.000000] [<ffffffff8103fb6a>] ? manage_workers+0x240/0x240 [ +0.000000] [<ffffffff81044211>] kthread+0x9d/0xa5 [ +0.000000] [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60 [ +0.000000] [<ffffffff814f75bc>] ret_from_fork+0x7c/0xb0 [ +0.000000] [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60 [ +0.000000] Code: d7 44 89 8d 50 ff ff ff 4c 89 95 58 ff ff ff e8 44 fc ff ff 44 8b 8d 50 ff ff ff 48 85 c0 4c 8b 95 58 ff ff ff 0f 84 7a 04 00 00 <f0> ff 80 98 01 00 00 83 3d 25 41 a7 00 00 45 8b b5 e8 05 00 00 [ +0.000000] RIP [<ffffffff810620dd>] __lock_acquire+0xed/0xe82 [ +0.000000] RSP <ffff88003c3c19d8> [ +0.000000] CR2: 0000000000000199 [ +0.000000] ---[ end trace e73cd3b52352dd34 ]--- Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Tested-by:
Frederic Dalleau <frederic.dalleau@intel.com> Signed-off-by:
-
Chris Metcalf authored
commit ff7f3efb upstream. The current Tilera boot infrastructure now provides the initramfs to Linux as a Tilera-hypervisor file named "initramfs", rather than "initramfs.cpio.gz", as before. (This makes it reasonable to use other compression techniques than gzip on the file without having to worry about the name causing confusion.) Adapt to use the new name, but also fall back to checking for the old name. Cc'ing to stable so that older kernels will remain compatible with newer Tilera boot infrastructure. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Trond Myklebust authored
commit 1166fde6 upstream. We need to be careful when testing task->tk_waitqueue in rpc_wake_up_task_queue_locked, because it can be changed while we are holding the queue->lock. By adding appropriate memory barriers, we can ensure that it is safe to test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set. Signed-off-by:
-
Andrew Morton authored
commit 522cff14 upstream. __ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
Vaguely based on upstream commit 574c4866 'consolidate kernel-side struct sigaction declarations'. flush_signal_handlers() needs to know whether sigaction::sa_restorer is defined, not whether SA_RESTORER is defined. Define the __ARCH_HAS_SA_RESTORER macro to indicate this. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 28 Mar, 2013 12 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit cb7da022 upstream. Since commit 8871e99f ('asus-laptop: HRWS/HWRS typo'), module initialisation is very slow on the Asus UL30A. The HWRS method takes about 12 seconds to run, and subsequent initialisation also seems to be delayed. Since we don't really need the result, don't bother calling it on init. Those who are curious can still get the result through the 'infos' device attribute. Update the comment about HWRS in show_infos(). Reported-by:
ryan <draziw+deb@gmail.com> References: http://bugs.debian.org/692436Signed-off-by:
Corentin Chary <corentin.chary@gmail.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Felix Fietkau authored
commit 6ef9e2f6 upstream. If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. [Backported for 3.8-stable. Removed code of simultaneous AP and mesh mode added in 4a5fc6d7 3.9-rc1.] Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
Lingzhu Xiang <lxiang@redhat.com> Reviewed-by:
CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Kees Cook authored
commit d7402698 upstream. To avoid an explosion of request_module calls on a chain of abusive scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon as maximum recursion depth is hit, the error will fail all the way back up the chain, aborting immediately. This also has the side-effect of stopping the user's shell from attempting to reexecute the top-level file as a shell script. As seen in the dash source: if (cmd != path_bshell && errno == ENOEXEC) { *argv-- = cmd; *argv = cmd = path_bshell; goto repeat; } The above logic was designed for running scripts automatically that lacked the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC, things continue to behave as the shell expects. Additionally, when tracking recursion, the binfmt handlers should not be involved. The recursion being tracked is the depth of calls through search_binary_handler(), so that function should be exclusively responsible for tracking the depth. Signed-off-by:
-
Lekensteyn authored
commit d627b62f upstream. This is rather a hack to fix brightness hotkeys on a Clevo laptop. CADL is not used anywhere in the driver code at the moment, but it could be used in BIOS as is the case with the Clevo laptop. The Clevo B7130 requires the CADL field to contain at least the ID of the LCD device. If this field is empty, the ACPI methods that are called on pressing brightness / display switching hotkeys will not trigger a notification. As a result, it appears as no hotkey has been pressed. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=45452Tested-by:
Peter Wu <lekensteyn@gmail.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Tomas Hozza authored
commit 95a69ada upstream. The source code without this patch caused hypervkvpd to exit when it processed a spoofed Netlink packet which has been sent from an untrusted local user. Now Netlink messages with a non-zero nl_pid source address are ignored and a warning is printed into the syslog. Signed-off-by:
Tomas Hozza <thozza@redhat.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Mathias Krause authored
commit 0143fc5e upstream. For type 0x51 the udf.parent_partref member in struct fid gets copied uninitialized to userland. Fix this by initializing it to 0. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Mathias Krause authored
commit fe685aab upstream. For type 1 the parent_offset member in struct isofs_fid gets copied uninitialized to userland. Fix this by initializing it to 0. Signed-off-by:
-
Alan Cox authored
commit a84a9219 upstream. On an error iov may still have been reallocated and need freeing Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Johan Hovold authored
commit 5492bf3d upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b91 ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 618aa106 upstream. Remove bogus disconnect test introduced by 95bef012 ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by:
-
Jan Kara authored
commit 89b1f39e upstream. For large UDF filesystems with 512-byte blocks the number of necessary bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows (the number will overflow for filesystems larger than 128 GB with 512-byte blocks). That results in ENOSPC errors despite the filesystem has plenty of free space. Fix the problem by changing s_nr_groups' type to 'int'. That is enough even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize. Reported-and-tested-by: v10lator@myway.de Signed-off-by:
-
