- 21 May, 2020 1 commit
-
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Check imported buffer mapping in generic way - This patch reworks exynos_drm_gem_prime_import_sg_table function, which checks if the imported buffer has been mapped as contiguous or not in generic way, and flag a exynos gem buffer type properly according to the mapped way. Fixups - Drop a reference count to in_bridge_node correctly. - Enable the runtime power management correctly. . The runtime pm should be enabled before calling compont_add(). Cleanups - Do not register "by hand" a sysfs file, and use dev_groups instead. - Drop internal 'pages' array which aren't needed. - Remove dead-code. - Correct type casting. - Drop unnecessary error messages. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1589952785-24210-1-git-send-email-inki.dae@samsung.com
-
- 20 May, 2020 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.8-2020-05-19: amdgpu: - Improved handling for CTF (Critical Thermal Fault) situations - Clarify AC/DC mode switches - SR-IOV fixes - XGMI fixes for RAS - Misc cleanups - Add autodump debugfs node to aid in GPU hang debugging UAPI: - Add a MEM_SYNC IB flag for handling proper acquire memory semantics if UMDs expect the kernel to handle this Used by AMDVLK: https://github.com/GPUOpen-Drivers/pal/blob/dev/src/core/os/amdgpu/amdgpuQueue.cpp#L1262Signed-off-by:
-
- 18 May, 2020 15 commits
-
-
Andrey Grodzovsky authored
When this flag is set in the CS IB flags, it causes a memory cache flush of the GFX. v2: Move new flag to drm_amdgpu_cs_chunk_ib.flags Bump up UAPI version Remove condition on job != null to emit mem_sync Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Marek Olšák authored
Compute IBs need this too. v2: split out version bump v3: squash in emit frame count fixes Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
Implement the .mem_sync hook defined earlier. v2: Rename functions Signed-off-by:
-
Andrey Grodzovsky authored
Used to flush and invalidate various caches. v2: Rename function hook Signed-off-by:
-
Kevin Wang authored
unified amdgpu device attribute node functions: 1. add some helper functions to create amdgpu device attribute node. 2. create device node according to device attr flags on different VF mode. 3. rename some functions name to adapt a new interface. v2: 1. remove ATTR_STATE_DEAD, ATTR_STATE_ALIVE enum. 2. rename callback function perform to attr_update. 3. modify some variable names Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Kevin Wang authored
the swsmu or powerplay(hwmgr) need to handle task according to different VF mode, this function to help query vf mode. vf mode: 1. SRIOV_VF_MODE_BARE_METAL: the driver work on host OS (PF) 2. SRIOV_VF_MODE_ONE_VF : the driver work on guest OS with one VF 3. SRIOV_VF_MODE_MULTI_VF : the driver work on guest OS with multi VF Signed-off-by:
-
Jiange Zhao authored
When GPU got timeout, it would notify an interested part of an opportunity to dump info before actual GPU reset. A usermode app would open 'autodump' node under debugfs system and poll() for readable/writable. When a GPU reset is due, amdgpu would notify usermode app through wait_queue_head and give it 10 minutes to dump info. After usermode app has done its work, this 'autodump' node is closed. On node closure, amdgpu gets to know the dump is done through the completion that is triggered in release(). There is no write or read callback because necessary info can be obtained through dmesg and umr. Messages back and forth between usermode app and amdgpu are unnecessary. v2: (1) changed 'registered' to 'app_listening' (2) add a mutex in open() to prevent race condition v3 (chk): grab the reset lock to avoid race in autodump_open, rename debugfs file to amdgpu_autodump, provide autodump_read as well, style and code cleanups v4: add 'bool app_listening' to differentiate situations, so that the node can be reopened; also, there is no need to wait for completion when no app is waiting for a dump. v5: change 'bool app_listening' to 'enum amdgpu_autodump_state' add 'app_state_mutex' for race conditions: (1)Only 1 user can open this file node (2)wait_dump() can only take effect after poll() executed. (3)eliminated the race condition between release() and wait_dump() v6: removed 'enum amdgpu_autodump_state' and 'app_state_mutex' removed state checking in amdgpu_debugfs_wait_dump Improve on top of version 3 so that the node can be reopened. v7: move reinit_completion into open() so that only one user can open it. v8: remove complete_all() from amdgpu_debugfs_wait_dump(). Signed-off-by:Jiange Zhao <Jiange.Zhao@amd.com> Reviewed-by:
-
Emil Velikov authored
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a sysfs file. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Christophe JAILLET authored
'exynos_dsi_parse_dt()' takes a reference to 'dsi->in_bridge_node'. This must be released in the error handling path. In order to do that, add an error handling path and move the 'exynos_dsi_parse_dt()' call from the beginning to the end of the probe function to ease the error handling path. This function only sets some variables which are used only in the 'transfer' function. The call chain is: .transfer --> exynos_dsi_host_transfer --> exynos_dsi_init --> exynos_dsi_enable_clock (use burst_clk_rate and esc_clk_rate) --> exynos_dsi_set_pll (use pll_clk_rate) While at it, also handle cases where 'component_add()' fails. This patch is similar to commit 70505c2e ("drm/exynos: dsi: Remove bridge node reference in removal") which fixed the issue in the remove function. Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Marek Szyprowski authored
Runtime power management is essential for the Exynos Mixer driver operation. It should be enabled before adding its DRM component, because in some cases (when deferred probe takes place due to the IOMMU availability) the DRM driver might be initialized directly from the Mixer's component_add() call, what results in starting the driver operation without enabling the runtime power management. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Bernard Zhao authored
Maybe keep pointer which points to global const string data in const type is better, make sure not change const data. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Marek Szyprowski authored
Internal pages array and scatter-list for them is not really needed for anything. FBDev emulation can simply rely on the DMA-mapping framework to create a proper kernel mapping for the buffer, while all other buffer use cases don't really need that array at all. Suggested-by:
-
Marek Szyprowski authored
Explicitly check if the imported buffer has been mapped as contiguous in the DMA address space, what is required by all Exynos DRM CRTC drivers. While touching this, set buffer flags depending on the availability of the IOMMU. Signed-off-by:
-
Marek Szyprowski authored
The ExynosDRM page fault handler is never used, drm_gem_mmap() always calls exynos_drm_gem_mmap() function, which perform complete mapping for the given virtual address-space area. Signed-off-by:
-
Markus Elfring authored
The function “platform_get_irq” can log an error already. Thus omit redundant messages for the exception handling in the calling functions. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 15 May, 2020 2 commits
-
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.8: UAPI Changes: Cross-subsystem Changes: * dma-buf: use atomic64_fetch_add() for context id * Documentation: document bindings for ASUS ZOOT TM5P5, BOE NV133FHM-N62, hpd-gpios Core Changes: Driver Changes: * drm/ast: fix supend; cleanups * drm/i2c: cleanups * drm/panel: add MODULE_LICENSE to panel-visinox-rm69299; add support for ASUS TM5P5i, BOE NV133FHM-N62i; fix size and bpp of BOE NV133FHM-N61 add hpd-gpio to panel-simple * drm/mcde: fix return value check in mcde_dsi_bind() * drm/mgag200: use managed drmm_mode_config_init(); cleanups * fbdev/pxa168fb: cleanups Signed-off-by:
-
- 14 May, 2020 20 commits
-
-
John Clements authored
Updated SMC FW version check to determine if XGMI power down control is supported Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
John Clements authored
Disable XGMI link power down prior to issuing a XGMI RAS error Reviewed-by:
-
John Clements authored
Reviewed-by:
-
John Clements authored
Added host to SMU FW cmd to enable/disable XGMI link power down Reviewed-by:
-
Colin Ian King authored
The variable ret is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Yintian Tao authored
There is no need to use amdgpu_mm_wreg_mmio_rlc() during initialization time because this interface is only designed for debugfs case to access the registers which are only permitted by RLCG during run-time. Therefore, turn back rlcg write for gfx_v10. If we not turn back it, it will raise amdgpu load failure. [ 54.904333] amdgpu: SMU driver if version not matched [ 54.904393] amdgpu: SMU is initialized successfully! [ 54.905971] [drm] kiq ring mec 2 pipe 1 q 0 [ 55.115416] amdgpu 0000:00:06.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring gfx_0.0.0 test failed (-110) [ 55.118877] [drm:amdgpu_device_init [amdgpu]] *ERROR* hw_init of IP block <gfx_v10_0> failed -110 [ 55.126587] amdgpu 0000:00:06.0: amdgpu_device_ip_init failed [ 55.133466] amdgpu 0000:00:06.0: Fatal error during GPU init Signed-off-by:
Yintian Tao <yttao@amd.com> Acked-by:
-
Evan Quan authored
'ctxid' is used to distinguish different events raised from SMC. 0x3 and 0x4 are for AC and DC power mode. V2: update the way to retrieve the ctxid and change the log level to debug Signed-off-by:Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
To prevent further damage. Signed-off-by:
-
Evan Quan authored
Normally this(SW CTF) should not happen. And by doing graceful shutdown we can prevent further damage. Signed-off-by:
-
Andrey Grodzovsky authored
Add this for gfx10 and gfx9. v2: Fix identation Signed-off-by:
-
Joonas Lahtinen authored
To ensure cross-driver locking compatibility, document the expected guidelines for implementing the GEM locking in i915. Note that this is a description of how things should end up after being reworked, and does not reflect the current state of things. v2: Use rst note:: tag (Rodrigo) Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
-
Ville Syrjälä authored
Pull the code to do the CS timestamp ns<->ticks conversion into helpers and use them all over. The check in i915_perf_noa_delay_set() seems a bit dubious, so we switch it to do what I assume it wanted to do all along (ie. make sure the resulting delay in CS timestamp ticks doesn't exceed 32bits)? Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-5-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
kHz isn't accurate enough for storing the CS timestamp frequency on some of the platforms. Store the value in Hz instead. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com>
-
Ville Syrjälä authored
Bunch of places use a 64bit divisor needlessly. Switch to 32bit divisor. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Stanislav Lisovskiy authored
Flip the switch and enable SAGV support for Gen12 also. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Stanislav Lisovskiy authored
According to BSpec 53998, we should try to restrict qgv points, which can't provide enough bandwidth for desired display configuration. Currently we are just comparing against all of those and take minimum(worst case). v2: Fixed wrong PCode reply mask, removed hardcoded values. v3: Forbid simultaneous legacy SAGV PCode requests and restricting qgv points. Put the actual restriction to commit function, added serialization(thanks to Ville) to prevent commit being applied out of order in case of nonblocking and/or nomodeset commits. v4: - Minor code refactoring, fixed few typos(thanks to James Ausmus) - Change the naming of qgv point masking/unmasking functions(James Ausmus). - Simplify the masking/unmasking operation itself, as we don't need to mask only single point per request(James Ausmus) - Reject and stick to highest bandwidth point if SAGV can't be enabled(BSpec) v5: - Add new mailbox reply codes, which seems to happen during boot time for TGL and indicate that QGV setting is not yet available. v6: - Increase number of supported QGV points to be in sync with BSpec. v7: - Rebased and resolved conflict to fix build failure. - Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus) v8: - Don't report an error if we can't restrict qgv points, as SAGV can be disabled by BIOS, which is completely legal. So don't make CI panic. Instead if we detect that there is only 1 QGV point accessible just analyze if we can fit the required bandwidth requirements, but no need in restricting. v9: - Fix wrong QGV transition if we have 0 planes and no SAGV simultaneously. v10: - Fix CDCLK corruption, because of global state getting serialized without modeset, which caused copying of non-calculated cdclk to be copied to dev_priv(thanks to Ville for the hint). v11: - Remove unneeded headers and spaces(Matthew Roper) - Remove unneeded intel_qgv_info qi struct from bw check and zero out the needed one(Matthew Roper) - Changed QGV error message to have more clear meaning(Matthew Roper) - Use state->modeset_set instead of any_ms(Matthew Roper) - Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used - Keep using crtc_state->hw.active instead of .enable(Matthew Roper) - Moved unrelated changes to other patch(using latency as parameter for plane wm calculation, moved to SAGV refactoring patch) v12: - Fix rebase conflict with own temporary SAGV/QGV fix. - Remove unnecessary mask being zero check when unmasking qgv points as this is completely legal(Matt Roper) - Check if we are setting the same mask as already being set in hardware to prevent error from PCode. - Fix error message when restricting/unrestricting qgv points to "mask/unmask" which sounds more accurate(Matt Roper) - Move sagv status setting to icl_get_bw_info from atomic check as this should be calculated only once.(Matt Roper) - Edited comments for the case when we can't enable SAGV and use only 1 QGV point with highest bandwidth to be more understandable.(Matt Roper) v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä) - Changed comment for zero new_mask in qgv points masking function to better reflect reality(Ville Syrjälä) - Simplified bit mask operation in qgv points masking function (Ville Syrjälä) - Moved intel_qgv_points_mask closer to gen11 SAGV disabling, however this still can't be under modeset condition(Ville Syrjälä) - Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask (Ville Syrjälä) - Extracted PCode changes to separate patch.(Ville Syrjälä) - Now treat num_planes 0 same as 1 to avoid confusion and returning max_bw as 0, which would prevent choosing QGV point having max bandwidth in case if SAGV is not allowed, as per BSpec(Ville Syrjälä) - Do the actual qgv_points_mask swap in the same place as all other global state parts like cdclk are swapped. In the next patch, this all will be moved to bw state as global state, once new global state patch series from Ville lands v14: - Now using global state to serialize access to qgv points - Added global state locking back, otherwise we seem to read bw state in a wrong way. v15: - Added TODO comment for near atomic global state locking in bw code. v16: - Fixed intel_atomic_bw_* functions to be intel_bw_* as discussed with Jani Nikula. - Take bw_state_changed flag into use. v17: - Moved qgv point related manipulations next to SAGV code, as those are semantically related(Ville Syrjälä) - Renamed those into intel_sagv_(pre)|(post)_plane_update (Ville Syrjälä) v18: - Move sagv related calls from commit tail into intel_sagv_(pre)|(post)_plane_update(Ville Syrjälä) v19: - Use intel_atomic_get_bw_(old)|(new)_state which is intended for commit tail stage. v20: - Return max bandwidth for 0 planes(Ville) - Constify old_bw_state in bw_atomic_check(Ville) - Removed some debugs(Ville) - Added data rate to debug print when no QGV points(Ville) - Removed some comments(Ville) v21, v22, v23: - Fixed rebase conflict v24: - Changed PCode mask to use ICL_ prefix v25: - Resolved rebase conflict v26: - Removed redundant NULL checks(Ville) - Removed redundant error prints(Ville) v27: - Use device specific drm_err(Ville) - Fixed parenthesis ident reported by checkpatch Line over 100 warns to be fixed together with existing code style. Signed-off-by: -
Stanislav Lisovskiy authored
Starting from TGL we need to have a separate wm0 values for SAGV and non-SAGV which affects how calculations are done. v2: Remove long lines v3: Removed COLOR_PLANE enum references v4, v5, v6: Fixed rebase conflict v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville) - Removed sagv_uv_wm0(Ville) - can_sagv->use_sagv_wm(Ville) v8: - Moved tgl_crtc_can_enable_sagv function up(Ville) - Changed comment regarding pipe_wm usage(Ville) - Call intel_can_enable_sagv and tgl_compute_sagv_wm only for Gen12(Ville) - Some sagv debugs removed(Ville) - skl_print_wm_changes improvements(Ville) - Do assignment instead of memcpy in skl_pipe_wm_get_hw_state(Ville) v9: - Removed can_sagv variable(Ville) - Removed spurious line(Ville) - Changed u32 to unsigned int as agreed(Ville) - Assign sagv only for gen12 in skl_pipe_wm_get_hw_state(Ville) Signed-off-by: -
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-next-2020-05-12 - Support PPGTT update via LRI cmd (Zhenyu) - Remove extra kmap for shadow ctx update (Zhenyu) - Move workload cleanup out of execlist handling code (Zhenyu) Signed-off-by:
-
Gwan-gyeong Mun authored
In order to use a common VSC SDP Colorimetry calculating code on PSR, it uses a new psr vsc sdp compute routine. Because PSR routine has its own scenario and timings of writing a VSC SDP, the current PSR routine needs to have its own drm_dp_vsc_sdp structure member variable on struct i915_psr. In order to calculate colorimetry information, intel_psr_update() function and intel_psr_enable() function extend a drm_connector_state argument. There are no changes to PSR mechanism. v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp v4: Rebased v8: Rebased v10: When a PSR is enabled, it needs to add DP_SDP_VSC to infoframes.enable. It is needed for comparing between HW and pipe_state of VSC_SDP. v11: If PSR is disabled by flag, it don't enable psr on pipe compute. v12: Fix an inconsistent indenting Signed-off-by:Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-15-gwan-gyeong.mun@intel.com
-
Gwan-gyeong Mun authored
In order to use a common VSC SDP Colorimetry calculating code on PSR, it adds a compute routine for PSR VSC SDP. As PSR routine can not use infoframes.vsc of crtc state, it also adds new writing of DP SDPs (Secondary Data Packet) for PSR. PSR routine has its own scenario and timings of writing a VSC SDP. v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp v4: Use struct drm_device logging macros v10: 1) Fix packing of VSC SDP where Pixel Encoding/Colorimetry Format is not supported. 2) Change a checking of PSR state. Signed-off-by:
-
