If we get a machine check exception due to SLB or TLB errors, then flush
SLBs/TLBs and reload SLBs to recover. We do this in real mode before turning
on MMU. Otherwise we would run into nested machine checks.

If we get a machine check when we are in guest, then just flush the
SLBs and continue. This patch handles errors for power7. The next
patch will handle errors for power8
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch introduces flush_tlb operation in cpu_spec structure. This will
help us to invoke appropriate CPU-side flush tlb routine. This patch
adds the foundation to invoke CPU specific flush routine for respective
architectures. Currently this patch introduce flush_tlb for p7 and p8.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds the early machine check function pointer in cputable for
CPU specific early machine check handling. The early machine handle routine
will be called in real mode to handle SLB and TLB errors. We can not reuse
the existing machine_check hook because it is always invoked in kernel
virtual mode and we would already be in trouble if we get SLB or TLB errors.
This patch just sets up a mechanism to invoke CPU specific handler. The
subsequent patches will populate the function pointer.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We can get machine checks from any context. We need to make sure that
we handle all of them correctly. If we are coming from hypervisor user-space,
we can continue in host kernel in virtual mode to deliver the MC event.
If we got woken up from power-saving mode then we may come in with one of
the following state:
 a. No state loss
 b. Supervisor state loss
 c. Hypervisor state loss
For (a) and (b), we go back to nap again. State (c) is fatal, keep spinning.

For all other context which we not sure of queue up the MCE event and return
from the interrupt.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Move machine check entry point into Linux. So far we were dependent on
firmware to decode MCE error details and handover the high level info to OS.

This patch introduces early machine check routine that saves the MCE
information (srr1, srr0, dar and dsisr) to the emergency stack. We allocate
stack frame on emergency stack and set the r1 accordingly. This allows us to be
prepared to take another exception without loosing context. One thing to note
here that, if we get another machine check while ME bit is off then we risk a
checkstop. Hence we restrict ourselves to save only MCE information and
register saved on PACA_EXMC save are before we turn the ME bit on. We use
paca->in_mce flag to differentiate between first entry and nested machine check
entry which helps proper use of emergency stack. We increment paca->in_mce
every time we enter in early machine check handler and decrement it while
leaving. When we enter machine check early handler first time (paca->in_mce ==
0), we are sure nobody is using MC emergency stack and allocate a stack frame
at the start of the emergency stack. During subsequent entry (paca->in_mce >
0), we know that r1 points inside emergency stack and we allocate separate
stack frame accordingly. This prevents us from clobbering MCE information
during nested machine checks.

The early machine check handler changes are placed under CPU_FTR_HVMODE
section. This makes sure that the early machine check handler will get executed
only in hypervisor kernel.

This is the code flow:

		Machine Check Interrupt
			|
			V
		   0x200 vector				  ME=0, IR=0, DR=0
			|
			V
	+-----------------------------------------------+
	|machine_check_pSeries_early:			| ME=0, IR=0, DR=0
	|	Alloc frame on emergency stack		|
	|	Save srr1, srr0, dar and dsisr on stack |
	+-----------------------------------------------+
			|
		(ME=1, IR=0, DR=0, RFID)
			|
			V
		machine_check_handle_early		  ME=1, IR=0, DR=0
			|
			V
	+-----------------------------------------------+
	|	machine_check_early (r3=pt_regs)	| ME=1, IR=0, DR=0
	|	Things to do: (in next patches)		|
	|		Flush SLB for SLB errors	|
	|		Flush TLB for TLB errors	|
	|		Decode and save MCE info	|
	+-----------------------------------------------+
			|
	(Fall through existing exception handler routine.)
			|
			V
		machine_check_pSerie			  ME=1, IR=0, DR=0
			|
		(ME=1, IR=1, DR=1, RFID)
			|
			V
		machine_check_common			  ME=1, IR=1, DR=1
			.
			.
			.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch introduces exclusive emergency stack for machine check exception.
We use emergency stack to handle machine check exception so that we can save
MCE information (srr1, srr0, dar and dsisr) before turning on ME bit and be
ready for re-entrancy. This helps us to prevent clobbering of MCE information
in case of nested machine checks.

The reason for using emergency stack over normal kernel stack is that the
machine check might occur in the middle of setting up a stack frame which may
result into improper use of kernel stack.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch splits the common exception prolog logic into three parts to
facilitate reuse of existing code in the next patch. This patch also
re-arranges few instructions in such a way that the second part now deals
with saving register values from paca save area to stack frame, and
the third part deals with saving current register values to stack frame.

The second and third part will be reused in the machine check exception
routine in the subsequent patch.

Please note that this patch does not introduce or change existing code
logic. Instead it is just a code movement and instruction re-ordering.

Patch Acked-by Paul. But made some minor modification (explained above) to
address Paul's comment in the later patch(3).
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We currently have a user visible CONFIG_POWERNV_MSI option, but it
doesn't actually disable MSI for powernv. The MSI code is always built,
what it does disable is the inclusion of the MSI bitmap code, which
leads to a build error.

eg, with PPC_POWERNV=y and POWERNV_MSI=n we get:

  arch/powerpc/platforms/built-in.o: In function `.pnv_teardown_msi_irqs':
  pci.c:(.text+0x3558): undefined reference to `.msi_bitmap_free_hwirqs'

We don't really need a POWERNV_MSI symbol, just have the MSI bitmap code
depend directly on PPC_POWERNV.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Previously PSERIES_MSI depended on PPC_PSERIES via EEH. However in
commit 317f06de "powerpc/eeh: Move common part to kernel directory" we
made CONFIG_EEH selectable on POWERNV. That leaves us with PSERIES_MSI
being live even when PSERIES=n. Fix it by making PSERIES_MSI depend
directly on PPC_PSERIES.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Currently PMC (Performance Monitor Counter) setup macros are used
for other SPRs. Since not all SPRs are PMC related, this patch
modifies the exisiting macro and uses it to setup both PMC and
non PMC SPRs accordingly.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Current irq_stat.timers_irqs counting doesn't discriminate timer event handler
and other timer interrupt(like arch_irq_work_raise). Sometimes we need to know
exactly how much interrupts timer event handler fired, so let's be more specific
on this.
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

As Benjamin Herrenschmidt has indicated, we still need a dummy icbi to
purge all the prefetched instructions from the ifetch buffers for the
snooping icache. We also need a sync before the icbi to order the
actual stores to memory that might have modified instructions with
the icbi.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Since not need 'max_cpus' after the related commit, the related code
are useless too, need be removed.

The related commit:

  c1aa687d powerpc: Clean up obsolete code relating to decrementer and timebase

The related warning:

  arch/powerpc/kernel/smp.c:323:43: warning: parameter ‘max_cpus’ set but not used [-Wunused-but-set-parameter]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This fixes a warning:

  DTC     arch/powerpc/boot/virtex440-ml507.dtb
Warning (reg_format): "reg" property in /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7
Warning (avoid_default_addr_size): Relying on default #size-cells value for /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Gernot Vormayr <gvormayr@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Currently I see:
  DTC     arch/powerpc/boot/kilauea.dtb
Warning (reg_format): "reg" property in /plb/ppc4xx-msi@C10000000 has invalid length (12 bytes) (#address-cells == 1, #size-cells == 1)

It appears that unlike the other platforms handled by 3fb79338
"powerpc/4xx: Adding PCIe MSI support" this platform does not use address-cells=2.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Josh Boyer <jwboyer@gmail.com>
Cc: Rupjyoti Sarmah <rsarmah@apm.com>
Cc: Tirumala R Marri <tmarri@apm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND...)
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

So that it can be used by other codes. No function change.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We are missing building windfarm_max6690_sensor.o when building
CONFIG_WINDFARM_RM31. Usually all the windfarm drivers are built
and thus this isn't a problem but some more "tailored" setups
(Gentoo ?) building only that driver are not working because
the require sensor module is missing.
Reported-by: Stanislav Ponomarev <devhexorg@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

for tmp_part->header.name:
    it is "Terminating null required only for names < 12 chars".
    so need to limit the %.12s for it in printk

  additional info:

    %12s  limit the width, not for the original string output length
          if name length is more than 12, it still can be fully displayed.
          if name length is less than 12, the ' ' will be filled before name.

    %.12s truly limit the original string output length (precision)
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

In a recent patch:
  commit c13f20ac
  Author: Michael Neuling <mikey@neuling.org>
  powerpc/signals: Mark VSX not saved with small contexts

We fixed an issue but an improved solution was later discussed after the patch
was merged.

Firstly, this patch doesn't handle the 64bit signals case, which could also hit
this issue (but has never been reported).

Secondly, the original patch isn't clear what MSR VSX should be set to.  The
new approach below always clears the MSR VSX bit (to indicate no VSX is in the
context) and sets it only in the specific case where VSX is available (ie. when
VSX has been used and the signal context passed has space to provide the
state).

This reverts the original patch and replaces it with the improved solution.  It
also adds a 64 bit version.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

When CONFIG_SPARSEMEM_VMEMMAP option is used in kernel, makedumpfile fails
to filter vmcore dump as it fails to do vmemmap translations. So far
dump filtering on ppc64 never had to deal with vmemmap addresses seperately
as vmemmap regions where mapped in zone normal. But with the inclusion of
CONFIG_SPARSEMEM_VMEMMAP config option in kernel, this vmemmap address
translation support becomes necessary for dump filtering. For vmemmap adress
translation, few kernel symbols are needed by dump filtering tool. This patch
adds those symbols to vmcoreinfo, which a dump filtering tool can use for
filtering the kernel dump. Tested this changes successfully with makedumpfile
tool that supports vmemmap to physical address translation outside zone normal.

[ Removed unneeded #ifdef as suggested by Michael Ellerman --BenH ]
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Stephen reported a failure in an allyesconfig build.
CONFIG_CPU_LITTLE_ENDIAN=y gets set but his toolchain is not
new enough to support little endian. We really want to
default to a big endian build; Ben suggested using a choice
which defaults to CPU_BIG_ENDIAN.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Currently if I cross build TAGS or cscope from x86 I get this:
  % make ARCH=powerpc TAGS
  gcc-4.8.real: error: unrecognized command line option ‘-mbig-endian’
  GEN     TAGS
  %

I'm not setting CROSS_COMPILE= as logically I shouldn't need to and I
haven't needed to in the past when building TAGS or cscope.  Also, the
above completess correct as the error is not fatal to the build.

This was caused by:
    commit d72b0801
    Author: Ian Munsie <imunsie@au1.ibm.com>
    powerpc: Add ability to build little endian kernels

The below fixes this by testing for the -mbig-endian option before
adding it.

I've not done the same thing in the little endian case as if
-mlittle-endian doesn't exist, we probably want to fail quickly as you
probably have an old big endian compiler.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Scott wrote:

<<
The corenet64 patch fixes a regression introduced in 3.13-rc1 (commit
ef1313de, "powerpc: Add VMX optimised xor
for RAID5").

The 8xx patch fixes a regression introduced in 3.12 (commit
beb2dc0a, "powerpc: Convert some
mftb/mftbu into mfspr").

The other two patches are fixes for minor, long standing bugs.
>>

And in flush_hugetlb_page(), don't check whether vma is NULL after
we've already dereferenced it.

This was found by Dan using static analysis as described here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-November/113161.html

We currently get away with this because the callers that currently pass
NULL for vma seem to be 32-bit-only (e.g. highmem, and
CONFIG_DEBUG_PGALLOC in pgtable_32.c)  Hugetlb is currently 64-bit only,
so we never saw a NULL vma here.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

These lines were inoperative for four years, which puts some doubt into
their importance, and it's possible the fixed version will regress, but
at the very least they should be removed instead.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Commit beb2dc0a breaks the MPC8xx which
seems to not support using mfspr SPRN_TBRx instead of mftb/mftbu
despite what is written in the reference manual.

This patch reverts to the use of mftb/mftbu when CONFIG_8xx is
selected.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>

If CONFIG_ALTIVEC is enabled for CoreNet64, and if we also
select CONFIG_E{5,6}500_CPU this may introduce -mcpu=e500mc64
into $CFLAGS. But Altivec option not allowed with e500mc64,
then some compiling errors occur like this:

      CC      arch/powerpc/lib/xor_vmx.o
    arch/powerpc/lib/xor_vmx.c:1:0: error: AltiVec not supported in this target
    make[1]: *** [arch/powerpc/lib/xor_vmx.o] Error 1
    make: *** [arch/powerpc/lib] Error 2

So we should restrict e500mc64 in altivec scenario.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull minor eCryptfs fix from Tyler Hicks:
 "Quiet static checkers by removing unneeded conditionals"

* tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: file->private_data is always valid

Pull second set of sound fixes from Takashi Iwai:
 "A collection of small fixes in HD-audio quirks and runtime PM, ASoC
  rcar, abs8500 and other codecs.  Most of commits are for stable
  kernels, too"

* tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
  ALSA: hda - Provide missing pin configs for VAIO with ALC260
  ALSA: hda - Add headset quirk for Dell Inspiron 3135
  ALSA: hda - Fix the headphone jack detection on Sony VAIO TX
  ALSA: hda - Fix missing bass speaker on ASUS N550
  ALSA: hda - Fix unbalanced runtime PM notification at resume
  ASoC: arizona: Set FLL to free-run before disabling
  ALSA: hda - A casual Dell Headset quirk
  ASoC: rcar: fixup dma_async_issue_pending() timing
  ASoC: rcar: off by one in rsnd_scu_set_route()
  ASoC: wm5110: Add post SYSCLK register patch for rev D chip
  ASoC: ab8500: Revert to using custom I/O functions
  ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup
  ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t
  ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP
  ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec
  ASoC: rcar: fixup mod access before checking

Pull DRM fixes from Dave Airlie:
 "I was going to leave this until post -rc1 but sysfs fixes broke
  hotplug in userspace, so I had to fix it harder, otherwise a set of
  pulls from intel, radeon and vmware,

  The vmware/ttm changes are bit larger but since its early and they are
  unlikely to break anything else I put them in, it lets vmware work
  with dri3"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
  drm/sysfs: fix hotplug regression since lifetime changes
  drm/exynos: g2d: fix memory leak to userptr
  drm/i915: Fix gen3 self-refresh watermarks
  drm/ttm: Remove set_need_resched from the ttm fault handler
  drm/ttm: Don't move non-existing data
  drm/radeon: hook up backlight functions for CI and KV family.
  drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
  drm/i915: Do not enable package C8 on unsupported hardware
  drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
  drm/i915: encoder->get_config is no longer optional
  drm/i915/tv: add ->get_config callback
  drm/radeon/cik: Add macrotile mode array query
  drm/radeon/cik: Return backend map information to userspace
  drm/vmwgfx: Make vmwgfx dma buffers prime aware
  drm/vmwgfx: Make surfaces prime-aware
  drm/vmwgfx: Hook up the prime ioctls
  drm/ttm: Add a minimal prime implementation for ttm base objects
  drm/vmwgfx: Fix false lockdep warning
  drm/ttm: Allow execbuf util reserves without ticket
  drm/i915: restore the early forcewake cleanup
  ...

Pull PCI updates from Bjorn Helgaas:
 "Miscellaneous
   - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu)
   - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)"

* tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
  PCI: Fix whitespace, capitalization, and spelling errors

Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -> (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...

Pull hwmon fixes from Guenter Roeck:
 - acpi_power_meter: Fix return value check from call to
   acpi_bus_get_device
 - nct6775: Fix/improve NCT6791 support
 - lm75: Add support for GMT G751

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check
  hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN
  hwmon: (nct6775) Monitor additional temperature registers
  hwmon: (lm75) Add support for GMT G751 chip

Pull networking fixes from David Miller:

 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar
    Karwar.

 2) skb_segment() can choke on packets using frag lists, fix from
    Herbert Xu with help from Eric Dumazet and others.

 3) IPv4 output cached route instantiation properly handles races
    involving two threads trying to install the same route, but we
    forgot to propagate this logic to input routes as well.  Fix from
    Alexei Starovoitov.

 4) Put protections in place to make sure that recvmsg() paths never
    accidently copy uninitialized memory back into userspace and also
    make sure that we never try to use more that sockaddr_storage for
    building the on-kernel-stack copy of a sockaddr.  Fixes from Hannes
    Frederic Sowa.

 5) R8152 driver transmit flow bug fixes from Hayes Wang.

 6) Fix some minor fallouts from genetlink changes, from Johannes Berg
    and Michael Opdenacker.

 7) AF_PACKET sendmsg path can race with netdevice unregister notifier,
    fix by using RCU to make sure the network device doesn't go away
    from under us.  Fix from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  gso: handle new frag_list of frags GRO packets
  genetlink: fix genl_set_err() group ID
  genetlink: fix genlmsg_multicast() bug
  packet: fix use after free race in send path when dev is released
  xen-netback: stop the VIF thread before unbinding IRQs
  wimax: remove dead code
  net/phy: Add the autocross feature for forced links on VSC82x4
  net/phy: Add VSC8662 support
  net/phy: Add VSC8574 support
  net/phy: Add VSC8234 support
  net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
  net: rework recvmsg handler msg_name and msg_namelen logic
  bridge: flush br's address entry in fdb when remove the
  net: core: Always propagate flag changes to interfaces
  ipv4: fix race in concurrent ip_route_input_slow()
  r8152: fix incorrect type in assignment
  r8152: support stopping/waking tx queue
  r8152: modify the tx flow
  r8152: fix tx/rx memory overflow
  netfilter: ebt_ip6: fix source and destination matching
  ...

Pull ARM fixes from Russell King:
 "Some small fixes for this merge window, most of them quite self
  explanatory - the biggest thing here is a fix for the ARMv7 LPAE
  suspend/resume support"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER
  ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
  ARM: 7892/1: Fix warning for V7M builds
  ARM: 7888/1: seccomp: not compatible with ARM OABI
  ARM: 7886/1: make OABI default to off
  ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume
  ARM: 7884/1: mm: Fix ECC mem policy printk
  ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE
  ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case
  ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case
  ARM: Fix nommu.c build warning

Pull KVM fixes from Gleb Natapov.

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: kvm_clear_guest_page(): fix empty_zero_page usage
  kvm: mmu: delay mmu audit activation
  arm/arm64: KVM: Fix hyp mappings of vmalloc regions