- 08 Feb, 2017 12 commits
-
-
Niklas Söderlund authored
All lanes in data-lanes and clock-lanes properties should be unique. Add a check for this in v4l2_of_parse_csi_bus() and print a warning if duplicated lanes are found. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: -
Hugues Fruchet authored
Adds some trace points showing input compressed stream or output decoded frame information. Adds an unconditional trace point when streaming starts showing the compressed stream and the decoded frame information. Adds an unconditional trace point at instance closure summarizing into a single line the decoding process (stream information, decoded and output frames number, potential errors observed). Acked-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Adds support of DELTA MJPEG video decoder back-end, implemented by calling JPEG_DECODER_HW0 firmware using RPMSG IPC communication layer. Acked-by:
-
Hugues Fruchet authored
EOS (End Of Stream) support allows user to get all the potential decoded frames remaining in decoder pipeline after having reached the end of video bitstream. To do so, user calls VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) which will drain the decoder and get the drained frames that are then returned to user. User is informed of EOS completion in two ways: - dequeue of an empty frame flagged to V4L2_BUF_FLAG_LAST - reception of a V4L2_EVENT_EOS event. If, unfortunately, no buffer is available on CAPTURE queue to return the empty frame, EOS is delayed till user queue one CAPTURE buffer. Acked-by:
-
Hugues Fruchet authored
IPC (Inter Process Communication) support for communication with DELTA coprocessor firmware using rpmsg kernel framework. Based on 4 services open/set_stream/decode/close and their associated rpmsg messages. The messages structures are duplicated on both host and firmware side and are packed (use only of 32 bits size fields in messages structures to ensure packing). Each service is synchronous; service returns only when firmware acknowledges the associated command message. Due to significant parameters size exchanged from host to copro, parameters are not inserted in rpmsg messages. Instead, parameters are stored in physical memory shared between host and coprocessor. Memory is non-cacheable, so no special operation is required to ensure memory coherency on host and on coprocessor side. Multi-instance support and re-entrance are ensured using host_hdl and copro_hdl in message header exchanged between both host and coprocessor. This avoids to manage tables on both sides to get back the running context of each instance. Acked-by:
-
Hugues Fruchet authored
Helper functions used by decoder back-ends to allocate physically contiguous memory required by hardware video decoder. Acked-by:
-
Hugues Fruchet authored
This V4L2 driver enables DELTA multi-format video decoder of STMicroelectronics STiH4xx SoC series. Acked-by:
-
Hugues Fruchet authored
Add entry for the STMicroelectronics DELTA driver. Acked-by:
-
Hugues Fruchet authored
Enables support of STMicroelectronics STiH4xx SoC series DELTA multi-format video decoder V4L2 driver. Acked-by:
-
Hugues Fruchet authored
This patch adds DT node for STMicroelectronics DELTA V4L2 video decoder Signed-off-by:
-
Hugues Fruchet authored
This patch adds DT binding documentation for STMicroelectronics DELTA V4L2 video decoder. Acked-by:
-
- 07 Feb, 2017 2 commits
-
-
Oleh Kravchenko authored
Internal Master 3 Bus can send and receive only 4 bytes per time. Signed-off-by:
Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by:
-
Oleh Kravchenko authored
This patch provide only digital support. The device is based on Si2168 30-demodulator, Si2158-20 tuner and CX23102-11Z chipset; USB id: 1b80:d3b2. Status: - DVB-T2 works fine; - Composite and SVideo works fine; - Analog not implemented. Signed-off-by:
-
- 03 Feb, 2017 26 commits
-
-
Tuukka Toivonen authored
v4l2-async had several functions doing some operations and then not undoing the operations in a failure situation. For example, v4l2_async_test_notify() moved a subdev into notifier's done list even if registering the subdev (v4l2_device_register_subdev) failed. If the subdev was allocated and v4l2_async_register_subdev() called from the driver's probe() function, as usually, the probe() function freed the allocated subdev and returned a failure. Nevertheless, the subdev was still left into the notifier's done list, causing an access to already freed memory when the notifier was later unregistered. A hand-edited call trace leaving freed subdevs into the notifier: v4l2_async_register_notifier(notifier, asd) cameradrv_probe sd = devm_kzalloc() v4l2_async_register_subdev(sd) v4l2_async_test_notify(notifier, sd, asd) list_move(sd, ¬ifier->done) v4l2_device_register_subdev(notifier->v4l2_dev, sd) cameradrv_registered(sd) -> fails ->v4l2_async_register_subdev returns failure ->cameradrv_probe returns failure ->devres frees the allocated sd ->sd was freed but it still remains in the notifier's list. This patch fixes this and several other cases where a failing function could leave nodes into a linked list while the caller might free the node due to a failure. Signed-off-by:Tuukka Toivonen <tuukka.toivonen@intel.com> Acked-by:
-
Dan Carpenter authored
We should be returning negative error codes here or it leads to a crash. This also silences a static checker warning. drivers/media/pci/mantis/mantis_cards.c:250 mantis_pci_probe() warn: 'mantis->dmxdev.dvbdev->fops' double freed Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Javier Martinez Canillas authored
There isn't an ioctl to enum the supported field orders, so a user-space application can call VIDIOC_TRY_FMT using different field orders to know if one is supported. For example, GStreamer does this so during playback dozens of the following messages appear in the kernel log buffer: [ 442.143393] Not supported field order(4) Instead of printing this as an error, just keep it as debug information. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Marc Duponcheel <marc@offline.be>, firmware load on dvb-usb is using the stack, with is not allowed anymore on default Kernel configurations: [ 1025.958836] dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware [ 1025.958853] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 1025.958855] dvb-usb: could not stop the USB controller CPU. [ 1025.958856] dvb-usb: error while transferring firmware (transferred size: -11, block size: 3) [ 1025.958856] dvb-usb: firmware download failed at 8 with -22 [ 1025.958867] usbcore: registered new interface driver dvb_usb_dtt200u [ 2.789902] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 2.789905] ------------[ cut here ]------------ [ 2.789911] WARNING: CPU: 3 PID: 2196 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [ 2.789912] transfer buffer not dma capable [ 2.789912] Modules linked in: btusb dvb_usb_dtt200u(+) dvb_usb_af9035(+) btrtl btbcm dvb_usb dvb_usb_v2 btintel dvb_core bluetooth rc_core rfkill x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect pcspkr i2c_i801 sysimgblt fb_sys_fops drm i2c_smbus i2c_core r8169 lpc_ich mfd_core mii thermal fan rtc_cmos video button acpi_cpufreq processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd crc32c_intel ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod [ 2.789936] CPU: 3 PID: 2196 Comm: systemd-udevd Not tainted 4.9.0-gentoo #1 [ 2.789937] Hardware name: ASUS All Series/H81I-PLUS, BIOS 0401 07/23/2013 [ 2.789938] ffffc9000339b690 ffffffff812bd397 ffffc9000339b6e0 0000000000000000 [ 2.789939] ffffc9000339b6d0 ffffffff81055c86 000006300339b6a0 ffff880116c0c000 [ 2.789941] 0000000000000000 0000000000000000 0000000000000001 ffff880116c08000 [ 2.789942] Call Trace: [ 2.789945] [<ffffffff812bd397>] dump_stack+0x4d/0x66 [ 2.789947] [<ffffffff81055c86>] __warn+0xc6/0xe0 [ 2.789948] [<ffffffff81055cea>] warn_slowpath_fmt+0x4a/0x50 [ 2.789952] [<ffffffffa006d460>] usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [ 2.789954] [<ffffffff814ed5a8>] ? io_schedule_timeout+0xd8/0x110 [ 2.789956] [<ffffffffa006e09c>] usb_hcd_submit_urb+0x9c/0x980 [usbcore] [ 2.789958] [<ffffffff812d0ebf>] ? copy_page_to_iter+0x14f/0x2b0 [ 2.789960] [<ffffffff81126818>] ? pagecache_get_page+0x28/0x240 [ 2.789962] [<ffffffff8118c2a0>] ? touch_atime+0x20/0xa0 [ 2.789964] [<ffffffffa006f7c4>] usb_submit_urb+0x2c4/0x520 [usbcore] [ 2.789967] [<ffffffffa006feca>] usb_start_wait_urb+0x5a/0xe0 [usbcore] [ 2.789969] [<ffffffffa007000c>] usb_control_msg+0xbc/0xf0 [usbcore] [ 2.789970] [<ffffffffa067903d>] usb_cypress_writemem+0x3d/0x40 [dvb_usb] [ 2.789972] [<ffffffffa06791cf>] usb_cypress_load_firmware+0x4f/0x130 [dvb_usb] [ 2.789973] [<ffffffff8109dbbe>] ? console_unlock+0x2fe/0x5d0 [ 2.789974] [<ffffffff8109e10c>] ? vprintk_emit+0x27c/0x410 [ 2.789975] [<ffffffff8109e40a>] ? vprintk_default+0x1a/0x20 [ 2.789976] [<ffffffff81124d76>] ? printk+0x43/0x4b [ 2.789977] [<ffffffffa0679310>] dvb_usb_download_firmware+0x60/0xd0 [dvb_usb] [ 2.789979] [<ffffffffa0679898>] dvb_usb_device_init+0x3d8/0x610 [dvb_usb] [ 2.789981] [<ffffffffa069e302>] dtt200u_usb_probe+0x92/0xd0 [dvb_usb_dtt200u] [ 2.789984] [<ffffffffa007420c>] usb_probe_interface+0xfc/0x270 [usbcore] [ 2.789985] [<ffffffff8138bf95>] driver_probe_device+0x215/0x2d0 [ 2.789986] [<ffffffff8138c0e6>] __driver_attach+0x96/0xa0 [ 2.789987] [<ffffffff8138c050>] ? driver_probe_device+0x2d0/0x2d0 [ 2.789988] [<ffffffff81389ffb>] bus_for_each_dev+0x5b/0x90 [ 2.789989] [<ffffffff8138b7b9>] driver_attach+0x19/0x20 [ 2.789990] [<ffffffff8138b33c>] bus_add_driver+0x11c/0x220 [ 2.789991] [<ffffffff8138c91b>] driver_register+0x5b/0xd0 [ 2.789994] [<ffffffffa0072f6c>] usb_register_driver+0x7c/0x130 [usbcore] [ 2.789994] [<ffffffffa06a5000>] ? 0xffffffffa06a5000 [ 2.789996] [<ffffffffa06a501e>] dtt200u_usb_driver_init+0x1e/0x20 [dvb_usb_dtt200u] [ 2.789997] [<ffffffff81000408>] do_one_initcall+0x38/0x140 [ 2.789998] [<ffffffff8116001c>] ? __vunmap+0x7c/0xc0 [ 2.789999] [<ffffffff81124fb0>] ? do_init_module+0x22/0x1d2 [ 2.790000] [<ffffffff81124fe8>] do_init_module+0x5a/0x1d2 [ 2.790002] [<ffffffff810c96b1>] load_module+0x1e11/0x2580 [ 2.790003] [<ffffffff810c68b0>] ? show_taint+0x30/0x30 [ 2.790004] [<ffffffff81177250>] ? kernel_read_file+0x100/0x190 [ 2.790005] [<ffffffff810c9ffa>] SyS_finit_module+0xba/0xc0 [ 2.790007] [<ffffffff814f13e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [ 2.790008] ---[ end trace c78a74e78baec6fc ]--- So, allocate the structure dynamically. Cc: stable@vger.kernel.org # Kernel 4.9+ Signed-off-by: -
Christophe JAILLET authored
It is likely that a "of_node_put(ep)" is missing here. There is one in the previous error handling code, and one a few lines below in the normal case as well. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Bhumika Goyal authored
Declare vb2_ops structure as const as it is only stored in the ops field of a vb2_queue structure. This field is of type const, so vb2_ops structures having same properties can be made const too. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p={...}; @ok1@ identifier r1.i; position p; struct sta2x11_vip vip; struct vb2_queue q; @@ ( vip.vb_vidq.ops=&i@p | q.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct vb2_ops i; File size details of media/dvb-frontends/rtl2832_sdr.o file remains the same before and after applying the patch. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Declare vb2_ops structure as const as it is only stored in the ops field of a vb2_queue structure. This field is of type const, so vb2_ops structures having same properties can be made const too. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p={...}; @ok1@ identifier r1.i; position p; struct sta2x11_vip vip; struct vb2_queue q; @@ ( vip.vb_vidq.ops=&i@p | q.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct vb2_ops i; File size before: text data bss dec hex filename 8448 440 0 8888 22b8 media/pci/sta2x11/sta2x11_vip.o File size after: text data bss dec hex filename 8552 352 0 8904 22c8 media/pci/sta2x11/sta2x11_vip.o Signed-off-by: -
Laurent Pinchart authored
Set the subdev devnode pointer right after registration to ensure that later errors won't skip the subdev when unregistering all devnodes. Signed-off-by:
-
Baruch Siach authored
The Freescale provided imx-vpu looks for firmware files under /lib/firmware/vpu by default. Make coda look there for firmware files to ease the update path. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Sean Young authored
The UK layout of the Microsoft Remote Keyboard has two missing keys: the hash key, and the messenger key which is sent using rc6 mce. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
Bail out early, otherwise we follow a null pointer. Signed-off-by:
-
Martin Blumenstingl authored
Keep the list up to date with include/media/rc-map.h Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
The driver already parses the "linux,rc-map-name" property. Add this information to the documentation so .dts maintainers don't have to look it up in the source-code. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/media/usb/dvb-usb/gp8psk.c:281:28: warning: symbol 'gp8psk_fe_ops' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
Fix typo in parameter description. Signed-off-by:
-
Kevin Cheng authored
Hauppauge WinTV-dualHD model 01595 is a USB 2.0 dual ATSC/QAM tuner with the following components: USB bridge: Empia em28274 Demodulator: 2x LG LGDT3306a at addresses 0xb2 and 0x1c Tuner: 2x Silicon Labs si2157 at addresses 0xc0 and 0xc4 This patch enables only the first tuner. Signed-off-by:
Kevin Cheng <kcheng@gmail.com> Signed-off-by:
-
Kevin Cheng authored
Adds an i2c mux to the lgdt3306a demodulator. This was done to support the Hauppauge WinTV-dualHD 01595 USB TV tuner (em28xx), which utilizes two si2157 tuners behind gate control. Signed-off-by:
-
Davidlohr Bueso authored
While the wakeup path seems to be set up, this waitqueue is actually never used as no-one enqueues themselves on the list. As such, wakeups are meaningless without waiters, so lets just get rid of the whole thing. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Baruch Siach authored
The fields of v4l2_subdev_pad_config are not pointers. Fixes: 21c29de1 ("[media] v4l2-subdev.h: Improve documentation") Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Nicolas Iooss authored
Using %4s to format f->fmt.pix_mp.pixelformat in fdp1_try_fmt() and fdp1_s_fmt() may lead to more characters being printed (when the byte following field pixelformat is not zero). Add ".4" to the format specifier to limit the number of printed characters to four. The resulting format specifier "%4.4s" is also used by other media drivers to print pixelformat value. Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Reviewed-by:
Kieran Bingham <kieran@bingham.xyz> Signed-off-by:
-
Niels Ole Salscheider authored
With this patch we use the new style to attach the frontend. Signed-off-by:
Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by:
-
Cao jin authored
In AER recovery, pci_error_handlers.link_reset() is never called, drop it now. Signed-off-by:
Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by:
-
devendra sharma authored
Fixed coding style issues of spacing Signed-off-by:
Devendra Sharma <devendra.sharma9091@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by gcc: drivers/media/usb/stk1160/stk1160-ac97.c:117:5: warning: no previous prototype for 'stk1160_has_audio' [-Wmissing-prototypes] int stk1160_has_audio(struct stk1160 *dev) ^~~~~~~~~~~~~~~~~ drivers/media/usb/stk1160/stk1160-ac97.c:125:5: warning: no previous prototype for 'stk1160_has_ac97' [-Wmissing-prototypes] int stk1160_has_ac97(struct stk1160 *dev) ^~~~~~~~~~~~~~~~ Signed-off-by: -
Marcel Hasler authored
The STK1160 needs some time to transfer data to and from the AC97 codec. The transfer completion is indicated by command read/write bits in the chip's audio control register. The driver should poll these bits and wait until they have been cleared by hardware before trying to retrieve the results of a read operation or setting a new write command. [mchehab@s-opensource.com: make checkpatch happier] Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Acked-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Marcel Hasler authored
Some STK1160-based devices use the chip's internal 8-bit ADC. This is configured through a strap pin. The value of this and other pins can be read through the POSVA register. If the internal ADC is used, or if audio is disabled altogether, there's no point trying to setup the AC97 codec. Signed-off-by:
-
