The Allwinner F1C100 series contains two MMC controller blocks. From
comparing the data sheets, they seem to be compatible with the one used
in the Allwinner A20: the register layout is the same, and they use the
same separate sample and output clocks design.
The only difference is the missing reset line in the A20 version, but
both the binding and the Linux driver make this optional, so it's still
a fit.

Add the new SoC specific name and require it to be paired with the A20
fallback name, as this is all the driver needs to care about.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220307143421.1106209-8-andre.przywara@arm.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The Rockchip rk356x ciu clock cannot be set as low as the dw-mmc
hardware supports. This leads to a situation during card initialization
where the clock is set lower than the clock driver can support. The
dw-mmc-rockchip driver spews errors when this happens.
For normal operation this only happens a few times during boot, but when
cd-broken is enabled (in cases such as the SoQuartz module) this fires
multiple times each poll cycle.

Fix this by testing the lowest possible frequency that the clock driver
can support which is within the mmc specification. Divide that rate by
the internal divider and set f_min to this.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220305215835.2210388-3-pgwipeout@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Host drivers may not be able to support frequencies as low as dw-mmc
supports. Unfortunately f_min isn't available when the drv_data->init
function is called, as the mmc_host struct hasn't been set up yet.

Support the host drivers saving the requested minimum frequency, so we
can later set f_min when it is available.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220305215835.2210388-2-pgwipeout@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.

Add comments to clarify the purpose of the empty elements.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/9050fa278eaaa9e6ec719a3b158a2fad285560d0.1646311673.git.geert+renesas@glider.beSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Commit 76bfc7cc ("mmc: core: adjust polling interval for CMD1"),
significantly decreased the polling period from ~10-12ms into just a couple
of us. The purpose was to decrease the total time spent in the busy polling
loop, but unfortunate it has lead to problems, that causes eMMC cards to
never gets out busy and thus fails to be initialized.

To fix the problem, but also to try to keep some of the new improved
behaviour, let's start by using a polling period of 1-2ms, which then
increases for each loop, according to common polling loop in
__mmc_poll_for_busy().
Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Huijin Park <huijin.park@samsung.com>
Fixes: 76bfc7cc ("mmc: core: adjust polling interval for CMD1")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/20220304105656.149281-1-ulf.hansson@linaro.org

SD spec definition:
"Host provides at least 74 Clocks before issuing first command"
After 1ms for the voltage stable then start issuing the Clock signals

if POWER STATE is
MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card
MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Document RZ/V2L SDHI bindings. RZ/V2L SDHI is almost identical to one
found on the R-Car Gen3. No driver changes are required as generic
compatible string "renesas,rcar-gen3-sdhi" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220227212330.22262-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

"a / (1 << b)" == "a >> b".

No change in generated code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/68d689c39c769d298b53ee8cb9de0e594a2999b2.1645460780.git.geert+renesas@glider.beSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add support for the controller present on the AM62x SoC.

There are instances:
sdhci0: 8bit bus width, max 200 MBps
sdhci1: 4bit bus width, max 100 MBps
sdhci2: 4bit bus width, max 100 MBps

The PHY used for 8 bit instance is same as the PHY for the 4 bit instance.
Therefore, introduce a new bus width independent compatible for AM62 SoC
that uses the driver data required for 4 bit instance.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220218072840.5629-1-a-govindraju@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Currently meson_mmc_post_req() is called in meson_mmc_request() right
after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request
is actually finished.

To fix, don't call meson_mmc_post_req() until meson_mmc_request_done().
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Fixes: 79ed05e3 ("mmc: meson-gx: add support for descriptor chain mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add i.MX93 compatible string, it uses two compatible strings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220215081502.789067-1-peng.fan@oss.nxp.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add compatible string for AM62 SoC in device tree binding of AM654
SDHCI module as the same IP is used.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220216134346.11029-1-a-govindraju@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The MMCSD IPs used in AM64 are the same as the ones used in J721E.
Therefore, fix this by using the driver data from J721E for AM64 too, for
both 8 and 4 bit instances.

Fixes: 754b7f2f ("mmc: sdhci_am654: Add Support for TI's AM64 SoC")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220211075056.26179-1-a-govindraju@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

sprintf() (still used in the MMC core for the sysfs output) is vulnerable
to the buffer overflow.  Use the new-fangled sysfs_emit() instead.

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/717729b2-d65b-c72e-9fac-471d28d00b5a@omp.ruSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

D1's MMC controllers are unique in that they have the DMA address shift
(like A100) with a 13-bit descriptor size field (like sun4i). Add the
compatible and parameters for this new variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203015112.12008-2-samuel@sholland.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

D1 contains variants of the usual sunxi MMC controller. The eMMC
controller has the same parameters as the A100 eMMC controller. The
other controllers have a DMA address shift like on A100, but they have
a smaller 13-bit size field, making them a new incompatible variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203015112.12008-1-samuel@sholland.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Use device_property_string_array_count() to get number of strings
in a string array property.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220202182450.54925-1-andriy.shevchenko@linux.intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Only the device data is needed, not the entire struct of_device_id.
Use of_device_get_match_data() instead of of_match_device().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20220202180648.1252154-6-huobean@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Only the device data is needed, not the entire struct of_device_id.
Use of_device_get_match_data() instead of open coding of_match_device().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20220202180648.1252154-5-huobean@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Only the device data is needed,not the whole struct of_device_id.
Use of_device_get_match_data() instead of open coding of of_match_device().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20220202180648.1252154-3-huobean@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Only the device data is needed, not the whole struct of_device_id.
Use of_device_get_match_data() instead of open coding of of_match_device().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20220202180648.1252154-2-huobean@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This commit adds dt-binding documentation of mmc for Mediatek MT8186 SoC
Platform.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20220128062050.23978-5-allen-kh.cheng@mediatek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add a vendor-specific bit at the bit26 of GL9750's register 878h and
GL9755's register 78h to decide whether to disable SSC function. If
this bit is set, the SSC function will be disabled.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20220119075406.36321-1-benchuanggli@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Enable SSC function at 50MHz and 100MHz for GL9750 and GL9755.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20220119075339.36281-1-benchuanggli@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The SSC value is 0xFFE7 at 205MHz and may be saturated. Reduce the SSC
value to 0x5A1D at 205MHz to reduce this situation for GL9750 and GL9755.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20220119075306.36262-1-benchuanggli@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

LiteX (https://github.com/enjoy-digital/litex) is a SoC framework
that targets FPGAs. LiteSDCard is a small footprint, configurable
SDCard core commonly used in LiteX designs.

The driver was first written in May 2020 and has been maintained
cooperatively by the LiteX community. Thanks to all contributors!
Co-developed-by: Kamil Rakoczy <krakoczy@antmicro.com>
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
Co-developed-by: Maciej Dudek <mdudek@internships.antmicro.com>
Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com>
Co-developed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220113170300.3555651-4-gsomlo@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

LiteSDCard is a small footprint, configurable SDCard core for
FPGA based SoCs.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220113170300.3555651-3-gsomlo@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add the litex_mmc (LiteSDCard) and LiteETH drivers to the list
of files maintained under LiteX.

Add Gabriel Somlo and Joel Stanley as maintainers; Joel authored
the LiteETH driver, and Gabriel is currently curating the LiteX
out-of-tree device drivers as they are tested and prepared for
upstream submission, having also co-authored a number of them.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Mateusz Holenko <mholenko@antmicro.com>
Link: https://lore.kernel.org/r/20220113170300.3555651-2-gsomlo@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Enable GPIO wake source on SD card detect line. Physical card
insertion/removal event should wake the system from suspend.
Signed-off-by: Aniruddha Rao <anrao@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1642050969-21152-1-git-send-email-anrao@nvidia.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add msm8953 SoC specific compatible strings for qcom-sdhci controller.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220112194118.178026-6-luca@z3ntu.xyzSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

we previously assumed 'host->slot' could be null,
null pointer judgment should be added
Signed-off-by: Wen Zhiwei <wenzhiwei@kylinos.cn>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20211229023814.53372-1-wenzhiwei@kylinos.cnSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull irq fix from Thomas Gleixner:
 "A single fix for a regression caused by the recent PCI/MSI rework
  which resulted in a recursive locking problem in the VMD driver.

  The cure is to cache the relevant information upfront instead of
  retrieving it at runtime"

* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI: vmd: Prevent recursive locking on interrupt allocation

Pull dma-mapping fix from Christoph Hellwig:

 - fix a swiotlb info leak (Halil Pasic)

* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix info leak with DMA_FROM_DEVICE

Pull pin control fixes from Linus Walleij:

 - Fix some drive strength and pull-up code in the K210 driver.

 - Add the Alder Lake-M ACPI ID so it starts to work properly.

 - Use a static name for the StarFive GPIO irq_chip, forestalling an
   upcoming fixes series from Marc Zyngier.

 - Fix an ages old bug in the Tegra 186 driver where we were indexing at
   random into struct and being lucky getting the right member.

* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  gpio: tegra186: Fix chip_data type confusion
  pinctrl: starfive: Use a static name for the GPIO irq_chip
  pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
  pinctrl: k210: Fix bias-pull-up
  pinctrl: fix loop in k210_pinconf_get_drive()

Pull tracing fixes from Steven Rostedt:

 - rtla (Real-Time Linux Analysis tool):
    - fix typo in man page
    - Update API -e to -E before it is released
    - Error message fix and memory leak fix

 - Partially uninline trace event soft disable to shrink text

 - Fix function graph start up test

 - Have triggers affect the trace instance they are in and not top level

 - Have osnoise sleep in the units it says it uses

 - Remove unused ftrace stub function

 - Remove event probe redundant info from event in the buffer

 - Fix group ownership setting in tracefs

 - Ensure trace buffer is minimum size to prevent crashes

* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla/osnoise: Fix error message when failing to enable trace instance
  rtla/osnoise: Free params at the exit
  rtla/hist: Make -E the short version of --entries
  tracing: Fix selftest config check for function graph start up test
  tracefs: Set the group ownership in apply_options() not parse_options()
  tracing/osnoise: Make osnoise_main to sleep for microseconds
  ftrace: Remove unused ftrace_startup_enable() stub
  tracing: Ensure trace buffer is at least 4096 bytes large
  tracing: Uninline trace_trigger_soft_disabled() partly
  eprobes: Remove redundant event type information
  tracing: Have traceon and traceoff trigger honor the instance
  tracing: Dump stacktrace trigger to the corresponding instance
  rtla: Fix systme -> system typo on man page

Pull memblock fix from Mike Rapoport:
 "Use kfree() to release kmalloced memblock regions

  memblock.{reserved,memory}.regions may be allocated using kmalloc()
  in memblock_double_array(). Use kfree() to release these kmalloced
  regions"

* tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: use kfree() to release kmalloced memblock regions

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
  and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
  slab)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  selftests/memfd: clean up mapping in mfd_fail_write
  mailmap: update Roman Gushchin's email
  MAINTAINERS, SLAB: add Roman as reviewer, git tree
  MAINTAINERS: add Shakeel as a memcg co-maintainer
  MAINTAINERS: remove Vladimir from memcg maintainers
  MAINTAINERS: add Roman as a memcg co-maintainer
  selftest/vm: fix map_fixed_noreplace test failure
  mm: fix use-after-free bug when mm->mmap is reused after being freed
  hugetlbfs: fix a truncation issue in hugepages parameter
  kasan: test: prevent cache merging in kmem_cache_double_destroy
  mm/hugetlb: fix kernel crash with hugetlb mremap
  MAINTAINERS: add sysctl-next git tree