- 28 Apr, 2022 20 commits
-
-
Alex Deucher authored
This data has no dependencies, so encapsulate it all within amdgpu_discovery.c. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
To get the codec disable fuse mask. Acked-by:
-
Alex Deucher authored
Check the table signatures and checksums and verify that the tables exist before accessing them. v2: disable MALL table for now Acked-by:
-
Alex Deucher authored
Add a function to fetch the mall size from the IP discovery table. Properly handle harvest configurations where more or less cache may be available. Acked-by:
-
Alex Deucher authored
Check the harvesting table to determing if any UMC blocks have been harvested. Acked-by:
-
Alex Deucher authored
For chips with IP discovery get this from the table, hardcode it for older asics. Acked-by:
-
Alex Deucher authored
This will be useful in future patches. Acked-by:
-
Alex Deucher authored
The table is in little endian format. Acked-by:
-
Guchun Chen authored
Disable runtime power management on several sienna cichlid cards, otherwise SMU will possibly fail to be resumed from runtime suspend. Will drop this after a clean solution between kernel driver and SMU FW is available. amdgpu 0000:63:00.0: amdgpu: GECC is enabled amdgpu 0000:63:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available amdgpu 0000:63:00.0: amdgpu: SMU is resuming... amdgpu 0000:63:00.0: amdgpu: SMU: I'm not done with your command: SMN_C2PMSG_66:0x0000000E SMN_C2PMSG_82:0x00000080 amdgpu 0000:63:00.0: amdgpu: Failed to SetDriverDramAddr! amdgpu 0000:63:00.0: amdgpu: Failed to setup smc hw! [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <smu> failed -62 amdgpu 0000:63:00.0: amdgpu: amdgpu_device_ip_resume failed (-62) v2: seperate to a function. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Alex Deucher authored
From the GC info table to the gfx config structure in the driver. The driver will use this data to configure the card correctly. Acked-by:
-
Alex Deucher authored
Add new tables. Acked-by:
-
Likun Gao authored
Add function to decode IP version. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Likun Gao authored
Extend HWIP MAX INSTANCE to 11. Acked-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Marek Marczykowski-Górecki authored
While technically Xen dom0 is a virtual machine too, it does have access to most of the hardware so it doesn't need to be considered a "passthrough". Commit b818a5d3 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") changed how FB is accessed based on passthrough mode. This breaks amdgpu in Xen dom0 with message like this: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 While the reason for this failure is unclear, the passthrough mode is not really necessary in Xen dom0 anyway. So, to unbreak booting affected kernels, disable passthrough mode in this case. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1985 Fixes: b818a5d3 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
-
Evan Quan authored
Fix the compile warning below: drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641 kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)' Reported-by:
kernel test robot <lkp@intel.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mukul Joshi authored
[ 168.544078] ====================================================== [ 168.550309] WARNING: possible circular locking dependency detected [ 168.556523] 5.16.0-kfd-fkuehlin #148 Tainted: G E [ 168.562558] ------------------------------------------------------ [ 168.568764] kfdtest/3479 is trying to acquire lock: [ 168.573672] ffffffffc0927a70 (&topology_lock){++++}-{3:3}, at: kfd_topology_device_by_id+0x16/0x60 [amdgpu] [ 168.583663] but task is already holding lock: [ 168.589529] ffff97d303dee668 (&mm->mmap_lock#2){++++}-{3:3}, at: vm_mmap_pgoff+0xa9/0x180 [ 168.597755] which lock already depends on the new lock. [ 168.605970] the existing dependency chain (in reverse order) is: [ 168.613487] -> #3 (&mm->mmap_lock#2){++++}-{3:3}: [ 168.619700] lock_acquire+0xca/0x2e0 [ 168.623814] down_read+0x3e/0x140 [ 168.627676] do_user_addr_fault+0x40d/0x690 [ 168.632399] exc_page_fault+0x6f/0x270 [ 168.636692] asm_exc_page_fault+0x1e/0x30 [ 168.641249] filldir64+0xc8/0x1e0 [ 168.645115] call_filldir+0x7c/0x110 [ 168.649238] ext4_readdir+0x58e/0x940 [ 168.653442] iterate_dir+0x16a/0x1b0 [ 168.657558] __x64_sys_getdents64+0x83/0x140 [ 168.662375] do_syscall_64+0x35/0x80 [ 168.666492] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.672095] -> #2 (&type->i_mutex_dir_key#6){++++}-{3:3}: [ 168.679008] lock_acquire+0xca/0x2e0 [ 168.683122] down_read+0x3e/0x140 [ 168.686982] path_openat+0x5b2/0xa50 [ 168.691095] do_file_open_root+0xfc/0x190 [ 168.695652] file_open_root+0xd8/0x1b0 [ 168.702010] kernel_read_file_from_path_initns+0xc4/0x140 [ 168.709542] _request_firmware+0x2e9/0x5e0 [ 168.715741] request_firmware+0x32/0x50 [ 168.721667] amdgpu_cgs_get_firmware_info+0x370/0xdd0 [amdgpu] [ 168.730060] smu7_upload_smu_firmware_image+0x53/0x190 [amdgpu] [ 168.738414] fiji_start_smu+0xcf/0x4e0 [amdgpu] [ 168.745539] pp_dpm_load_fw+0x21/0x30 [amdgpu] [ 168.752503] amdgpu_pm_load_smu_firmware+0x4b/0x80 [amdgpu] [ 168.760698] amdgpu_device_fw_loading+0xb8/0x140 [amdgpu] [ 168.768412] amdgpu_device_init.cold+0xdf6/0x1716 [amdgpu] [ 168.776285] amdgpu_driver_load_kms+0x15/0x120 [amdgpu] [ 168.784034] amdgpu_pci_probe+0x19b/0x3a0 [amdgpu] [ 168.791161] local_pci_probe+0x40/0x80 [ 168.797027] work_for_cpu_fn+0x10/0x20 [ 168.802839] process_one_work+0x273/0x5b0 [ 168.808903] worker_thread+0x20f/0x3d0 [ 168.814700] kthread+0x176/0x1a0 [ 168.819968] ret_from_fork+0x1f/0x30 [ 168.825563] -> #1 (&adev->pm.mutex){+.+.}-{3:3}: [ 168.834721] lock_acquire+0xca/0x2e0 [ 168.840364] __mutex_lock+0xa2/0x930 [ 168.846020] amdgpu_dpm_get_mclk+0x37/0x60 [amdgpu] [ 168.853257] amdgpu_amdkfd_get_local_mem_info+0xba/0xe0 [amdgpu] [ 168.861547] kfd_create_vcrat_image_gpu+0x1b1/0xbb0 [amdgpu] [ 168.869478] kfd_create_crat_image_virtual+0x447/0x510 [amdgpu] [ 168.877884] kfd_topology_add_device+0x5c8/0x6f0 [amdgpu] [ 168.885556] kgd2kfd_device_init.cold+0x385/0x4c5 [amdgpu] [ 168.893347] amdgpu_amdkfd_device_init+0x138/0x180 [amdgpu] [ 168.901177] amdgpu_device_init.cold+0x141b/0x1716 [amdgpu] [ 168.909025] amdgpu_driver_load_kms+0x15/0x120 [amdgpu] [ 168.916458] amdgpu_pci_probe+0x19b/0x3a0 [amdgpu] [ 168.923442] local_pci_probe+0x40/0x80 [ 168.929249] work_for_cpu_fn+0x10/0x20 [ 168.935008] process_one_work+0x273/0x5b0 [ 168.940944] worker_thread+0x20f/0x3d0 [ 168.946623] kthread+0x176/0x1a0 [ 168.951765] ret_from_fork+0x1f/0x30 [ 168.957277] -> #0 (&topology_lock){++++}-{3:3}: [ 168.965993] check_prev_add+0x8f/0xbf0 [ 168.971613] __lock_acquire+0x1299/0x1ca0 [ 168.977485] lock_acquire+0xca/0x2e0 [ 168.982877] down_read+0x3e/0x140 [ 168.987975] kfd_topology_device_by_id+0x16/0x60 [amdgpu] [ 168.995583] kfd_device_by_id+0xa/0x20 [amdgpu] [ 169.002180] kfd_mmap+0x95/0x200 [amdgpu] [ 169.008293] mmap_region+0x337/0x5a0 [ 169.013679] do_mmap+0x3aa/0x540 [ 169.018678] vm_mmap_pgoff+0xdc/0x180 [ 169.024095] ksys_mmap_pgoff+0x186/0x1f0 [ 169.029734] do_syscall_64+0x35/0x80 [ 169.035005] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 169.041754] other info that might help us debug this: [ 169.053276] Chain exists of: &topology_lock --> &type->i_mutex_dir_key#6 --> &mm->mmap_lock#2 [ 169.068389] Possible unsafe locking scenario: [ 169.076661] CPU0 CPU1 [ 169.082383] ---- ---- [ 169.088087] lock(&mm->mmap_lock#2); [ 169.092922] lock(&type->i_mutex_dir_key#6); [ 169.100975] lock(&mm->mmap_lock#2); [ 169.108320] lock(&topology_lock); [ 169.112957] *** DEADLOCK *** This commit fixes the deadlock warning by ensuring pm.mutex is not held while holding the topology lock. For this, kfd_local_mem_info is moved into the KFD dev struct and filled during device init. This cached value can then be used instead of querying the value again and again. Signed-off-by:Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Mukul Joshi authored
The logic to update the IO links when a KFD device is removed was not correct as it would miss updating the proximity domain values for some nodes where the node_from and node_to both were greater values than the proximity domain value of the KFD device being removed from topology. Fixes: 46d18d51 ("drm/amdkfd: Cleanup IO links during KFD device removal") Signed-off-by:
-
Christophe JAILLET authored
All uses of the 'kfd->gtt_sa_bitmap' bitmap are protected with the 'kfd->gtt_sa_lock' mutex. So: - prefer the non-atomic '__set_bit()' function - use the non-atomic 'bitmap_[set|clear]()' functions instead of equivalent 'for' loops. These functions can work on several bits at a time Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Christophe JAILLET authored
'kfd->gtt_sa_bitmap' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by:
-
Melissa Wen authored
From [1], I realized two other calls to dcn30 code are associated with FPU operations and are not protected by DC_FP_* macros: * dcn30_populate_dml_writeback_from_context() * dcn30_set_mcif_arb_params() So, since FPU-associated code is not fully isolated in dcn30, and dcn3.1.x reuses them, let's wrap their calls properly. Note: this patch complements the fix from [1]. [1] https://lore.kernel.org/amd-gfx/20220329082957.1662655-1-chandan.vurdigerenataraj@amd.com/Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
- 26 Apr, 2022 17 commits
-
-
oushixiong authored
Signed-off-by:
oushixiong <oushixiong@kylinos.cn> Signed-off-by:
-
Rongguang Wei authored
Fix spelling mistake: "differnt" -> "different" "commond" -> "common" Signed-off-by:
Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by:
-
Dan Carpenter authored
If the kzalloc() fails then this code will crash. Return -ENOMEM instead. Fixes: e50d9ba0 ("drm/amdgpu: Add debugfs TA load/unload/invoke support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
There are two error code bugs here. The copy_to/from_user() functions return the number of bytes remaining (a positive number). We should return -EFAULT if the copy fails. Second if we fail because "context.resp_status" is non-zero then return -EINVAL instead of zero. Fixes: e50d9ba0 ("drm/amdgpu: Add debugfs TA load/unload/invoke support") Signed-off-by:
-
Zhenneng Li authored
Signed-off-by:
Zhenneng Li <lizhenneng@kylinos.cn> Signed-off-by:
-
David Zhang authored
[Why] Allow for PSR SMU optimization and PSR multiple display optimization. [How] Add feature flags of PSR smu optimization and PSR multiple display optimiztaion, and set them during init sequence. By default, flags are disabled. Signed-off-by:
David Zhang <dingchen.zhang@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
Prike Liang authored
Without MMHUB clock gating being enabled then MMHUB will not disconnect from DF and will result in DF C-state entry can't be accessed during S2idle suspend, and eventually s0ix entry will be blocked. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Acked-by:
-
Guo Zhengkui authored
Fix the following coccicheck warning: drivers/gpu/drm/amd/display/dc/dcn201/dcn201_hwseq.c:98:8-10: WARNING: possible condition with no effect (if == else) Reviewed-by:
Zhan Liu <zhan.liu@amd.com> Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by:
-
Alex Deucher authored
It's not used outside of dcn31_clk_mgr.c. Reported-by:
-
Haohui Mai authored
The gfx_v10_0_ring_test_ib() function uses 20 bytes instead of 16 bytes during the test. The patch sets the size of the allocation to be 4-byte larger to match the actual usage. Reviewed-by:
Haohui Mai <ricetons@gmail.com> Signed-off-by:
-
Haohui Mai authored
Updated the patch for the pre-vega hardware. I kept the clamping code to be safe. Reviewed-by:
-
Haohui Mai authored
This patch fixes the issue where the driver miscomputes the 64-bit values of the wptr of the SDMA doorbell when initializing the hardware. SDMA engines v4 and later on have full 64-bit registers for wptr thus they should be set properly. Older generation hardwares like CIK / SI have only 16 / 20 / 24bits for the WPTR, where the calls of lower_32_bits() will be removed in a following patch. Reviewed-by:
-
Tom Rix authored
Sparse reports these issues si_dpm.c:332:26: warning: symbol 'cac_weights_pitcairn' was not declared. Should it be static? si_dpm.c:1088:26: warning: symbol 'cac_weights_oland' was not declared. Should it be static? Both of these variables are only used in si_dpm.c. Single file variables should be static, so change their storage-class specifiers to static. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Tom Rix authored
Sparse reports these issues cik_blit_shaders.c:31:11: warning: symbol 'cik_default_state' was not declared. Should it be static? cik_blit_shaders.c:246:11: warning: symbol 'cik_default_size' was not declared. Should it be static? cik_default_state and cik_default_size are only used in cik.c. Single file symbols should be static. So move their definitions to cik_blit_shaders.h and change their storage-class-specifier to static. Remove unneeded cik_blit_shader.c Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings for a comment that should not use kernel-doc notation: dmub_psr.c:235: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Set PSR power optimization flags. dmub_psr.c:235: warning: missing initial short description on line: * Set PSR power optimization flags. Fixes: e5dfcd27 ("drm/amd/display: dc_link_set_psr_allow_active refactoring") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
-
Philip Yang authored
Change SVM range mapping flags or access attributes don't trigger migration, if range is already mapped on GPUs we should update GPU mapping and pass flush_tlb flag true to amdgpu vm. Change SVM range preferred_loc or migration granularity don't need update GPU mapping, skip the validate_and_map. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Philip Yang authored
To avoid unnecessary unmap SVM range from GPUs if range is not mapped on GPUs when migrating the range. This flag will also be used to flush TLB when updating the existing mapping on GPUs. It is protected by prange->migrate_mutex and mmap read lock in MMU notifier callback. Signed-off-by:
-
- 25 Apr, 2022 3 commits
-
-
Aric Cyr authored
This version brings along following fixes: - Keep tracking of DSC packed PPS for future use - Maintain current link settings in link loss interrupt - Remove DDC write and read size check - Read PSR-SU cap DPCD for specific panel - Don't pass HostVM by default on DCN3.1 - Reset cached PSR parameters after hibernate - Add audio readback registers - Update dcn315 clk table read Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Ilya Bakoulin authored
[Why] Store current packed PPS data in dc_stream_state for future use. Reviewed-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by:
-
Dillon Varone authored
Integer no longer needed. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
-
