- 24 Nov, 2017 13 commits
-
-
Changwei Ge authored
commit 1c019671 upstream. When a node dies, other live nodes have to choose a new master for an existed lock resource mastered by the dead node. As for ocfs2/dlm implementation, this is done by function - dlm_move_lockres_to_recovery_list which marks those lock rsources as DLM_LOCK_RES_RECOVERING and manages them via a list from which DLM changes lock resource's master later. So without invoking dlm_move_lockres_to_recovery_list, no master will be choosed after dlm recovery accomplishment since no lock resource can be found through ::resource list. What's worse is that if DLM_LOCK_RES_RECOVERING is not marked for lock resources mastered a dead node, it will break up synchronization among nodes. So invoke dlm_move_lockres_to_recovery_list again. Fixs: 'commit ee8f7fcb ("ocfs2/dlm: continue to purge recovery lockres when recovery master goes down")' Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED6E0F9@H3CMLB14-EX.srv.huawei-3com.comSigned-off-by:
Changwei Ge <ge.changwei@h3c.com> Reported-by:
Vitaly Mayatskih <v.mayatskih@gmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
commit 373c4557 upstream. This matters at least for the mincore syscall, which will otherwise copy uninitialized memory from the page allocator to userspace. It is probably also a correctness error for /proc/$pid/pagemap, but I haven't tested that. Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has no effect because the caller already checks for that. This only reports holes in hugetlb ranges to callers who have specified a hugetlb_entry callback. This issue was found using an AFL-based fuzzer. v2: - don't crash on ->pte_hole==NULL (Andrew Morton) - add Cc stable (Andrew Morton) Fixes: 1e25a271 ("mincore: apply page table walker on do_mincore()") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Neeraj Upadhyay authored
commit 135bd1a2 upstream. The pending-callbacks check in rcu_prepare_for_idle() is backwards. It should accelerate if there are pending callbacks, but the check rather uselessly accelerates only if there are no callbacks. This commit therefore inverts this check. Fixes: 15fecf89 ("srcu: Abstract multi-tail callback list handling") Signed-off-by:
Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Alexander Steffen authored
commit ee70bc1e upstream. tpm_transmit() does not offer an explicit interface to indicate the number of valid bytes in the communication buffer. Instead, it relies on the commandSize field in the TPM header that is encoded within the buffer. Therefore, ensure that a) enough data has been written to the buffer, so that the commandSize field is present and b) the commandSize field does not announce more data than has been written to the buffer. This should have been fixed with CVE-2011-1161 long ago, but apparently a correct version of that patch never made it into the kernel. Signed-off-by:
Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
-
Ji-Ze Hong (Peter Hong) authored
commit fd97e66c upstream. The SuperIO will be configured at boot time by BIOS, but some BIOS will not deactivate the SuperIO when the end of configuration. It'll lead to mismatch for pdata->base_port in probe_setup_port(). So we'll deactivate all SuperIO before activate special base_port in fintek_8250_enter_key(). Tested on iBASE MI802. Tested-by:
Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Lukas Wunner authored
commit 2a71de2f upstream. Commit 348f9bb3 ("serial: omap: Fix RTS handling") sought to enable auto RTS upon manual RTS assertion and disable it on deassertion. However it seems the latter was done incorrectly, it clears all bits in the Extended Features Register *except* auto RTS. Fixes: 348f9bb3 ("serial: omap: Fix RTS handling") Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Roberto Sassu authored
commit 020aae3e upstream. Commit b65a9cfc ("Untangling ima mess, part 2: deal with counters") moved the call of ima_file_check() from may_open() to do_filp_open() at a point where the file descriptor is already opened. This breaks the assumption made by IMA that file descriptors being closed belong to files whose access was granted by ima_file_check(). The consequence is that security.ima and security.evm are updated with good values, regardless of the current appraisal status. For example, if a file does not have security.ima, IMA will create it after opening the file for writing, even if access is denied. Access to the file will be allowed afterwards. Avoid this issue by checking the appraisal status before updating security.ima. Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 7c8a61d9 ] Alexandar Potapenko while testing the kernel with KMSAN and syzkaller discovered that in some configurations sctp would leak 4 bytes of kernel stack. Working with his reproducer I discovered that those 4 bytes that are leaked is the scope id of an ipv6 address returned by recvmsg. With a little code inspection and a shrewd guess I discovered that sctp_inet6_skb_msgname only initializes the scope_id field for link local ipv6 addresses to the interface index the link local address pertains to instead of initializing the scope_id field for all ipv6 addresses. That is almost reasonable as scope_id's are meaniningful only for link local addresses. Set the scope_id in all other cases to 0 which is not a valid interface index to make it clear there is nothing useful in the scope_id field. There should be no danger of breaking userspace as the stack leak guaranteed that previously meaningless random data was being returned. Fixes: 372f525b ("SCTP: Resync with LKSCTP tree.") History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gitReported-by:
Alexander Potapenko <glider@google.com> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Huacai Chen authored
[ Upstream commit cc54c1d3 ] This patch try to fix the building error on MIPS. The reason is MIPS has already defined the LONG macro, which conflicts with the LONG enum in drivers/net/ethernet/fealnx.c. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 6314dab4 ] The GetNtbFormat and SetNtbFormat requests operate on 16 bit little endian values. We get away with ignoring this most of the time, because we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000. This fails for USB_CDC_NCM_NTB32_FORMAT. Fix comparison between LE value from device and constant by converting the constant to LE. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: 2b02c20c ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Cc: Enrico Mioso <mrkiko.rs@gmail.com> Cc: Christian Panton <christian@panton.org> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-By:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 8bff3685 ] Commit f1fb08f6 ("vxlan: fix ND proxy when skb doesn't have transport header offset") removed icmp6_code and icmp6_type check before calling neigh_reduce when doing neigh proxy. It means all icmpv6 packets would be blocked by this, not only ns packet. In Jianlin's env, even ping6 couldn't work through it. This patch is to bring the icmp6_code and icmp6_type check back and also removed the same check from neigh_reduce(). Fixes: f1fb08f6 ("vxlan: fix ND proxy when skb doesn't have transport header offset") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Vincent Bernat <vincent@bernat.im> Signed-off-by:
-
Jason A. Donenfeld authored
[ Upstream commit 0642840b ] The way people generally use netlink_dump is that they fill in the skb as much as possible, breaking when nla_put returns an error. Then, they get called again and start filling out the next skb, and again, and so forth. The mechanism at work here is the ability for the iterative dumping function to detect when the skb is filled up and not fill it past the brim, waiting for a fresh skb for the rest of the data. However, if the attributes are small and nicely packed, it is possible that a dump callback function successfully fills in attributes until the skb is of size 4080 (libmnl's default page-sized receive buffer size). The dump function completes, satisfied, and then, if it happens to be that this is actually the last skb, and no further ones are to be sent, then netlink_dump will add on the NLMSG_DONE part: nlh = nlmsg_put_answer(skb, cb, NLMSG_DONE, sizeof(len), NLM_F_MULTI); It is very important that netlink_dump does this, of course. However, in this example, that call to nlmsg_put_answer will fail, because the previous filling by the dump function did not leave it enough room. And how could it possibly have done so? All of the nla_put variety of functions simply check to see if the skb has enough tailroom, independent of the context it is in. In order to keep the important assumptions of all netlink dump users, it is therefore important to give them an skb that has this end part of the tail already reserved, so that the call to nlmsg_put_answer does not fail. Otherwise, library authors are forced to find some bizarre sized receive buffer that has a large modulo relative to the common sizes of messages received, which is ugly and buggy. This patch thus saves the NLMSG_DONE for an additional message, for the case that things are dangerously close to the brim. This requires keeping track of the errno from ->dump() across calls. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Michael Lyle authored
commit 62530ed8 upstream. A new field was introduced in 74d46992, bi_partno, instead of using bdev->bd_contains and encoding the partition information in the bi_bdev field. __bio_clone_fast was changed to copy the disk information, but not the partition information. At minimum, this regressed bcache and caused data corruption. Signed-off-by:
Michael Lyle <mlyle@lyle.org> Fixes: 74d46992 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reported-by:
Pavel Goran <via-bcache@pvgoran.name> Reported-by:
Campbell Steven <casteven@gmail.com> Reviewed-by:
Coly Li <colyli@suse.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
- 21 Nov, 2017 27 commits
-
-
Greg Kroah-Hartman authored
-
Nitin Gupta authored
[ Upstream commit 70f3c8b7 ] For a PUD hugepage entry, we need to propagate bits [32:22] from virtual address to resolve at 4M granularity. However, the current code was incorrectly propagating bits [29:19]. This bug can cause incorrect data to be returned for pages backed with 16G hugepages. Signed-off-by:
Nitin Gupta <nitin.m.gupta@oracle.com> Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Guenter Roeck authored
commit 01c3f0a4 upstream. Fix the following build errors. In file included from arch/sparc/include/asm/mmu_context.h:4:0, from include/linux/mmu_context.h:4, from drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:29, from drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:23: arch/sparc/include/asm/mmu_context_64.h:22:37: error: unknown type name 'per_cpu_secondary_mm' arch/sparc/include/asm/mmu_context_64.h: In function 'switch_mm': arch/sparc/include/asm/mmu_context_64.h:79:2: error: implicit declaration of function 'smp_processor_id' Fixes: 70539bd7 ("drm/amd: Update MEC HQD loading code for KFD") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
David S. Miller authored
commit 23198ddf upstream. This fixes the build with i40e driver enabled. Reported-by:
-
Johan Hovold authored
commit 67f7b278 upstream. The controller is typically freed as part of device_unregister() so store the bus id before deregistration to avoid use-after-free when the id is later released. Fixes: 9b61e302 ("spi: Pick spi bus number from Linux idr or spi alias") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 66d32fdc upstream. Commit 2ba8444c ("staging:r8188eu: move IV/ICV trimming into decrypt() and also place it after rtl88eu_mon_recv_hook()") breaks ARP. After this commit ssh-ing to a laptop with r8188eu wifi no longer works if the machine connecting has never communicated with the laptop before. This is 100% reproducable using "arp -d <ipv4> && ssh <ipv4>" to ssh to a laptop with r8188eu wifi. This commit reverts 4 commits in total: 1. Commit 79650ffd ("staging:r8188eu: trim IV/ICV fields in validate_recv_data_frame()") This commit depends on 2 of the other commits being reverted. 2. Commit 02b19b4c ("staging:r8188eu: inline unprotect_frame() in mon_recv_decrypted_recv()") The inline code is wrong the un-inlined version contains: if (skb->len < hdr_len + iv_len + icv_len) return; ... Where as the inline-ed code introduced by this commit does: if (skb->len < hdr_len + iv_len + icv_len) { ... Note the same check, but now to actually continue doing ... instead of to not do it, so this commit is no good. 3. Commit d86e16da ("staging:r8188eu: use different mon_recv_decrypted() inside rtl88eu_mon_recv_hook() and rtl88eu_mon_xmit_hook().") This commit introduced a 1:1 copy of a function so that one of the 2 copies can be modified in the 2 commits we're already reverting. 4. Commit 2ba8444c ("staging:r8188eu: move IV/ICV trimming into decrypt() and also place it after rtl88eu_mon_recv_hook()") This is the commit actually breaking ARP. Note this commit is a straight-forward squash of the revert of these 4 commits, without any changes. Cc: Ivan Safonov <insafonov@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit ce10d7b4 upstream. The x and y hints receives from the host are unsigned 32 bit integers and they get set to -1 (0xffffffff) when invalid. Before this commit the vboxvideo driver was storing them in an u16 causing the -1 to be truncated to 65535 which, once reported to userspace, was breaking gnome 3.26+ in Wayland mode. This commit stores the host values in 32 bit variables, removing the truncation and checks for -1, replacing it with 0 as -1 is not a valid suggested-offset-property value. Likewise the properties are now initialized to 0 instead of -1, since -1 is not a valid value. This fixes gnome 3.26+ in Wayland mode not working with the vboxvideo driver. Reported-by:
Gianfranco Costamagna <locutusofborg@debian.org> Cc: Michael Thayer <michael.thayer@oracle.com> Signed-off-by:
-
Johan Hovold authored
commit 770b03c2 upstream. Remove erroneous spi_master_put() after controller deregistration which would access the already freed spi controller. Note that spi_unregister_master() drops our only controller reference. Fixes: ba3e6700 ("greybus: SPI: convert to a gpbridge driver") Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Gilad Ben-Yossef authored
commit e0b3f390 upstream. Fix a wrong offset used in splitting a 64 DMA address to MSB/LSB parts needed for scatter/gather HW descriptors causing operations relying on them to fail on 64 bit platforms. Fixes: c6f7f2f4 ("staging: ccree: refactor LLI access macros") Reported-by:
Stuart Yoder <stuart.yoder@arm.com> Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Huacai Chen authored
commit 16808dcf upstream. In commit c075b6f2 ("staging: sm750fb: Replace POKE32 and PEEK32 by inline functions"), POKE32 has been replaced by the inline function poke32. But it exchange the "addr" and "data" parameters by mistake, so fix it. Fixes: c075b6f2 ("staging: sm750fb: Replace POKE32 and PEEK32 by inline functions"), Signed-off-by:
Liangliang Huang <huangll@lemote.com> Signed-off-by:
-
Aditya Shankar authored
commit 1bbf6a6d upstream. Commit 46949b48 ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler") updated the frame format sent from host to the firmware. The code to update the bssid offset in the new frame was part of a second patch in the series which did not make it in and thus causes connection problems after associating to an AP. This fix adds the proper offset of the bssid value in the Tx queue buffer to fix the connection issues. Fixes: 46949b48 ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler") Signed-off-by:
Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by:
-
Bjorn Andersson authored
commit 1e0d5615 upstream. The qcom_glink_native driver is missing a MODULE_LICENSE(), correct this. Fixes: 835764dd ("rpmsg: glink: Move the common glink protocol implementation to glink_native.c") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Jason Gerecke authored
commit 885e89f6 upstream. The WACOM_PEN_FIELD macro is used to determine if a given HID field should be associated with pen input. This field includes several known collection types that Wacom pen data is contained in, but the WACOM_HID_WD_PEN application collection type is notably missing. This can result in fields within this kind of collection being completely ignored by the `wacom_usage_mapping` function, preventing the later '*_event' functions from being notified about changes to their value. Fixes: c9c09587 ("HID: wacom: generic: Support and use 'Custom HID' mode and usages") Fixes: ac2423c9 ("HID: wacom: generic: add vendor defined touch") Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Sébastien Szymanski authored
commit cde3076b upstream. Otherwise, with HIDRAW=n, the probe function crashes because of null dereference of hdev->hidraw. Fixes: 42cb6b35 ("HID: cp2112: use proper hidraw name with minor number") Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by:
-
Hans de Goede authored
commit d6fa71f1 upstream. Add missing terminating entry to peaq_dmi_table. Fixes: 3b952061 ("platform/x86: peaq-wmi: Add DMI check before ...") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
commit 3b952061 upstream. It seems that the WMI GUID used by the PEAQ 2-in-1 WMI hotkeys is not as unique as a GUID should be and is used on some other devices too. This is causing spurious key-press reports on these other devices. This commits adds a DMI check to the PEAQ 2-in-1 WMI hotkeys driver to ensure that it is actually running on a PEAQ 2-in-1, fixing the spurious key-presses on these other devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1497861 BugLink: https://bugzilla.suse.com/attachment.cgi?id=743182Signed-off-by:
-
Yazen Ghannam authored
commit d65dfc81 upstream. The AMD severity grading function was introduced in kernel 4.1. The current logic can possibly give MCE_AR_SEVERITY for uncorrectable errors in kernel context. The system may then get stuck in a loop as memory_failure() will try to handle the bad kernel memory and find it busy. Return MCE_PANIC_SEVERITY for all UC errors IN_KERNEL context on AMD systems. After: b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") was accepted in v4.6, this issue was masked because of the tail-end attempt at kernel mode recovery in the #MC handler. However, uncorrectable errors IN_KERNEL context should always be considered unrecoverable and cause a panic. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: bf80bbd7 (x86/mce: Add an AMD severities-grading function) Link: http://lkml.kernel.org/r/20171106174633.13576-1-bp@alien8.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 693cb558 upstream. On new enough glibc, the pkey syscalls numbers are available. Check first before defining them to avoid warnings like: protection_keys.c:198:0: warning: "SYS_pkey_alloc" redefined Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1fbef53a9e6befb7165ff855fc1a7d4788a191d6.1509794321.git.luto@kernel.orgSigned-off-by:
-
Johan Hovold authored
commit 74d471b5 upstream. Make sure to free the port private data before returning after a failed probe attempt. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 19a565d9 upstream. Make sure to stop any submitted interrupt and bulk-out URBs before returning after failed probe and when the port is being unbound to avoid later NULL-pointer dereferences in the completion callbacks. Also fix up the related and broken I/O cancellation on failed open and on close. (Note that port->write_urb was never submitted.) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Douglas Fischer authored
commit 771394a5 upstream. Add USB PID/VID for Sierra Wireless EM7355 LTE modem QDL firmware update mode. Signed-off-by:
Douglas Fischer <douglas.fischer@outlook.com> Signed-off-by:
-
Lu Baolu authored
commit 12f28144 upstream. The product ID for "Linux USB GDB Target device" has been changed. Change the driver binding table accordingly. This patch should be back-ported to kernels as old as v4.12, that contain the commit 57fb4727 ("usb/serial: Add DBC debug device support to usb_debug"). Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
commit 2339536d upstream. Make sure to kill the interrupt-in URB after a failed open request. Apart from saving power (and avoiding stale input after a later successful open), this also prevents a NULL-deref in the completion handler if the port is manually unbound. Reviewed-by:
-
Andrew Gabbasov authored
commit cdafb6d8 upstream. KASAN enabled configuration reports an error BUG: KASAN: use-after-free in ffs_free_inst+... [usb_f_fs] at addr ... Write of size 8 by task ... This is observed after "ffs-test" is run and interrupted. If after that functionfs is unmounted and g_ffs module is unloaded, that use-after-free occurs during g_ffs module removal. Although the report indicates ffs_free_inst() function, the actual use-after-free condition occurs in _ffs_free_dev() function, which is probably inlined into ffs_free_inst(). This happens due to keeping the ffs_data reference in device structure during functionfs unmounting, while ffs_data itself is freed as no longer needed. The fix is to clear that reference in ffs_closed() function, which is a counterpart of ffs_ready(), where the reference is stored. Fixes: 3262ad82 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference") Signed-off-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Bernhard Rosenkraenzer authored
commit a0fea602 upstream. Without this patch, K70 LUX keyboards don't work, saying usb 3-3: unable to read config index 0 descriptor/all usb 3-3: can't read configurations, error -110 usb usb3-port3: unable to enumerate USB device Signed-off-by:
Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org> Signed-off-by:
-
Alan Stern authored
commit 2ef47001 upstream. The USB kerneldoc says that the actual_length field "is read in non-iso completion functions", but the usbfs driver uses it for all URB types in processcompl(). Since not all of the host controller drivers set actual_length for isochronous URBs, programs using usbfs with some host controllers don't work properly. For example, Minas reports that a USB camera controlled by libusb doesn't work properly with a dwc2 controller. It doesn't seem worthwhile to change the HCDs and the documentation, since the in-kernel USB class drivers evidently don't rely on actual_length for isochronous transfers. The easiest solution is for usbfs to calculate the actual_length value for itself, by adding up the lengths of the individual packets in an isochronous transfer. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-and-tested-by:
wlf <wulf@rock-chips.com> Signed-off-by:
-
Lu Baolu authored
commit c67678ec upstream. The DbC register set defines an interface for system software to specify the vendor id and product id for the debug device. These two values will be presented by the debug device in its device descriptor idVendor and idProduct fields. The current used product ID is a place holder. We now have a valid one. The description strings are changed accordingly. This patch should be back-ported to kernels as old as v4.12, that contain the commit aeb9dd1d ("usb/early: Add driver for xhci debug capability"). Signed-off-by:
-
