- 25 Sep, 2019 3 commits
-
-
Lyude Paul authored
The names for these functions are rather confusing. drm_dp_add_port() sounds like a function that would simply create a port and add it to a topology, and do nothing more. Similarly, drm_dp_update_port() would be assumed to be the function that should be used to update port information after initial creation. While those assumptions are currently correct in how these functions are used, a quick glance at drm_dp_add_port() reveals that drm_dp_add_port() can also update the information on a port, and seems explicitly designed to do so. This can be explained pretty simply by the fact that there's more situations that would involve updating the port information based on a link address response as opposed to a connection status notification than the driver's initial topology probe. Case in point: reprobing link addresses after suspend/resume. Since we're about to start using drm_dp_add_port() differently for suspend/resume reprobing, let's rename both functions to clarify what they actually do. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-18-lyude@redhat.com
-
Lyude Paul authored
Turns out we've been forgetting for a while now to actually destroy any of the mutexes that we create in drm_dp_mst_topology_mgr. So, let's do that. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Yannick Fertré <yannick.fertre@st.com> Tested-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/e0d7b7d7-3e89-8b3f-04ed-0b14806e66f7@web.de
-
- 24 Sep, 2019 1 commit
-
-
Gerd Hoffmann authored
There is little reason for the from/to logic, printing a subset of the bits can be done by simply shifting/masking value if needed. Also use for_each_set_bit(). Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
-
- 23 Sep, 2019 3 commits
-
-
Maxime Ripard authored
The newer Allwinner SoCs have a different layers controller than the older ones. Jernej wrote that support and has been reviewing patches for a while now, so let's make him a formal reviewer. Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190919173020.11655-2-mripard@kernel.org
-
Maxime Ripard authored
The DRM drivers are more than about the A10 now, so let's make the entry name a bit more generic. Also, Chen-Yu has been a de-facto maintainer for the DRM driver for a while, is a maintainer of the Allwinner platform for an even longer time, and has drm-misc commit access. Let's make it formal and add him as a maintainer. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Sean Paul authored
Fixes include/drm/drm_gem_ttm_helper.h:1: warning: no structured comments found Fixes: ff540b76 ("drm/ttm: add drm gem ttm helpers, starting with drm_gem_ttm_print_info()") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190920193558.89815-2-sean@poorly.run
-
- 22 Sep, 2019 1 commit
-
-
Qiang Yu authored
This causes kernel crash when testing lima driver. Cc: Christian König <christian.koenig@amd.com> Fixes: b8c036df ("dma-buf: simplify reservation_object_get_fences_rcu a bit") Signed-off-by:
Qiang Yu <yuq825@gmail.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 21 Sep, 2019 1 commit
-
-
Dan Carpenter authored
The "lvds->backlight" pointer could be NULL in situations where of_parse_phandle() returns NULL. This code is cleaner if we use the managed devm_of_find_backlight() so the clean up is automatic. Fixes: 7c9dff5b ("drm: panels: Add LVDS panel driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190911104928.GA15930@mwanda
-
- 20 Sep, 2019 4 commits
-
-
Ondrej Jirman authored
This check is already performed by of_graph_get_remote_node. No need to repeat it immediately after the call. Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Ville Syrjälä authored
The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f37 ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.comReviewed-by:
Thierry Reding <treding@nvidia.com>
-
Gwan-gyeong Mun authored
Because between HDMI and DP have different colorspaces, it adds drm_mode_create_dp_colorspace_property() function for creating of DP colorspace property. v3: Addressed review comments from Ville - Add new colorimetry options for DP 1.4a spec. - Separate set of colorimetry enum values for DP. v4: Add additional comments to struct drm_prop_enum_list. Polishing an enum string of struct drm_prop_enum_list v5: Change definitions of DRM_MODE_COLORIMETRYs to follow HDMI prefix and DP abbreviations. Add missed variables on dp_colorspaces. Fix typo. [Uma] v6: Addressed review comments from Ilia and Ville - Split drm_mode_create_colorspace_property() to DP and HDMI connector. v7: Fix typo [Jani Saarinen] Fix white space. v8: Addressed review comments from Ville - Drop colorimetries which have another way to distinguish or which would not be used. v9: Addressed review comments from Ville - Split hunk into renaming and adding of code. Signed-off-by:Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Gwan-gyeong Mun authored
As between HDMI and DP have different colorspaces, in order to distinguish colorspace of DP and HDMI, it renames drm_mode_create_colorspace_property() function to drm_mode_create_hdmi_colorspace_property() function for HDMI connector. In order to apply changed drm api, i915 driver has channged. It addresses review comments from Ville. - Split hunk into renaming and adding of code. Signed-off-by:
-
- 19 Sep, 2019 5 commits
-
-
Iago Toral Quiroga authored
Extends the user space ioctl for CL submissions so it can include a request to flush the cache once the CL execution has completed. Fixes memory write violation messages reported by the kernel in workloads involving shader memory writes (SSBOs, shader images, scratch, etc) which sometimes also lead to GPU resets during Piglit and CTS workloads. v2: if v3d_job_init() fails we need to kfree() the job instead of v3d_job_put() it (Eric Anholt). v3 (Eric Anholt): - Drop _FLAG suffix from the new flag name. - Add a new param so userspace can tell whether cache flushing is implemented in the kernel. Signed-off-by:Iago Toral Quiroga <itoral@igalia.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Ville Syrjälä authored
Fill out our list of cea modes with the new stuff from CTA-861-G. We only do the modes with VIC < 128 here. Adding the higher numbered VICs will need some slight code refactoring first. Cc: Hans Verkuil <hansverk@cisco.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com>
-
Ville Syrjälä authored
Add definitions for the MSA (Main Stream Attribute) MISC bits. On some hardware you can program these directly into a register. Signed-off-by:
-
Ville Syrjälä authored
Allow drivers to call drm_atomic_helper_check_modeset() without having the crtc helper funcs specified. i915 doesn't need those anymore. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
-
Ville Syrjälä authored
Add a small wrapper around lockdep_assert_held() to make it a bit more conventinet to use with modeset locks. Signed-off-by:
-
- 18 Sep, 2019 4 commits
-
-
Iago Toral Quiroga authored
If the initialization of the job fails we need to kfree() it before returning. Signed-off-by:
-
Daniel Vetter authored
Current code is quite a mess unfortunately, so also add a todo.rst entry to maybe fix it up eventually. Cc: Michel Dänzer <michel@daenzer.net> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190917120936.7501-2-daniel.vetter@ffwll.ch
-
Lowry Li (Arm Technology China) authored
Adds to support register dump on lpu and dou of pipeline and gcu on D71 Changes since v1: - For a constant format without additional arguments, use seq_puts() instead of seq_printf(). Signed-off-by:
Lowry Li (Arm Technology China) <lowry.li@arm.com> Signed-off-by:
james qian wang (Arm Technology China) <james.qian.wang@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190917112525.25490-1-lowry.li@arm.com
-
Mihail Atanassov authored
Provide a dummy static inline function in the header instead. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lowry Li (Arm Technology China) <Lowry.Li@arm.com> Cc: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Fixes: 4d74b25e ("drm/komeda: Adds error event print functionality") Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
- 17 Sep, 2019 9 commits
-
-
Lyude Paul authored
There's no need to raise our voice when saying encoder, we're all civilized adults here! Signed-off-by:
-
Lyude Paul authored
Similar to possible_clones, we don't actually use possible_crtcs until the driver is registered with userspace. So, fix the documentation to indicate this. Signed-off-by:
-
Lyude Paul authored
We say that all of the bits in possible_clones must be set before calling drm_encoder_init(). This isn't true though, since: * The driver may not even have all of the encoder objects that could be used as clones initialized at that point * possible_crtcs isn't used at all outside of userspace, so it's not actually needed to initialize it until drm_dev_register() So, fix it. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a literal string, fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 1329 bytes. Before: text data bss dec hex filename 5581 1488 64 7133 1bdd drivers/staging/fbtft/fb_hx8340bn.o 5444 1264 0 6708 1a34 drivers/staging/fbtft/fb_hx8347d.o 3581 1360 0 4941 134d drivers/staging/fbtft/fb_ili9163.o 7154 1552 0 8706 2202 drivers/staging/fbtft/fb_ili9320.o 7478 2544 0 10022 2726 drivers/staging/fbtft/fb_ili9325.o 6327 1424 0 7751 1e47 drivers/staging/fbtft/fb_s6d1121.o 6498 1776 0 8274 2052 drivers/staging/fbtft/fb_ssd1289.o After: text data bss dec hex filename 5376 1584 64 7024 1b70 drivers/staging/fbtft/fb_hx8340bn.o 5276 1328 0 6604 19cc drivers/staging/fbtft/fb_hx8347d.o 3581 1360 0 4941 134d drivers/staging/fbtft/fb_ili9163.o 6905 1616 0 8521 2149 drivers/staging/fbtft/fb_ili9320.o 7229 2608 0 9837 266d drivers/staging/fbtft/fb_ili9325.o 6030 1488 0 7518 1d5e drivers/staging/fbtft/fb_s6d1121.o 6249 1872 0 8121 1fb9 drivers/staging/fbtft/fb_ssd1289.o (gcc version 9.2.1, amd64) Signed-off-by:
-
Thomas Zimmermann authored
The VRAM helper's vmap interfaces provide pinning and mapping of BO memory. This patch replaces the respective code in mgag200 cursor handling. Signed-off-by:
-
Thomas Zimmermann authored
The VRAM helper's vmap interfaces provide pinning and mapping of BO memory. This patch replaces the respective code in ast cursor handling. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of vmap and vunmap for GEM VRAM helpers is already in PRIME helpers. The patch moves the operations to separate functions and exports them for general use. v3: * remove v2's obsolete note on ref-counting v2: * fix documentation * add cross references to function documentation * document (the lack of) ref-counting for GEM VRAM BO mappings Signed-off-by:
-
Lowry Li (Arm Technology China) authored
Adds to print the event message when error happens and the same event will not be printed until next vsync. Changes since v2: 1. Refine komeda_sprintf(); 2. Not using STR_SZ macro for the string size in komeda_print_events(). Changes since v1: 1. Handling the event print by CONFIG_KOMEDA_ERROR_PRINT; 2. Changing the max string size to 256. Signed-off-by:
-
- 16 Sep, 2019 9 commits
-
-
José Roberto de Souza authored
Currently we restrict the number of encoders that can be linked to a connector to 3, increase it to match the maximum number of encoders that can be initialized(32). To more effiently do that lets switch from an array of encoder ids to bitmask. v2: Fixing missed return on amdgpu_dm_connector_to_encoder() Suggested-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190913232857.389834-2-jose.souza@intel.com
-
José Roberto de Souza authored
This 3 non-atomic drivers all have the same function getting the only encoder available in the connector, also atomic drivers have this fallback. So moving it a common place and sharing between atomic and non-atomic drivers. While at it I also removed the mention of drm_atomic_helper_best_encoder() that was renamed in commit 297e30b5 ("drm/atomic-helper: Unexport drm_atomic_helper_best_encoder"). v3: moving drm_connector_get_single_encoder to drm_kms_helper module Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Thierry Reding authored
struct device is forward-declared twice. Remove the second instance. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Benjamin Gaignard authored
Remove always false comparisons due to limited range of nfl_bpg_offset and scale_increment_interval fields. Warnings detected when compiling with W=1. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190911084759.6946-1-benjamin.gaignard@st.com
-
Benjamin Gaignard authored
Fix warnings when W=1. No code changes, only clean up in sti internal structures and functions descriptions. Signed-off-by:
-
Yannick Fertré authored
In order to better support video non-burst modes, the +20% on pll out is added only in burst mode. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Brian Masney authored
The i2c_new_dummy() function is deprecated since it returns NULL on error. Change this to use the recommended replacement i2c_new_dummy_device() that returns an error code that can be read with PTR_ERR() and friends. Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Brian Masney authored
Silence two warning messages that occur due to -EPROBE_DEFER errors to help cleanup the system boot log. Signed-off-by:
-
Brian Masney authored
Add support for the 7808 variant. While we're here, the of match table was missing support for the 7812 and 7818 variants, so add them as well. Signed-off-by:
-
