- 03 May, 2021 10 commits
-
-
Thomas Zimmermann authored
Replace all references to struct drm_device's pdev field with an upcast from dev. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace all references to struct drm_device's pdev field with an upcast from dev. Signed-off-by:
-
Thomas Zimmermann authored
Replace all references to struct drm_device's pdev field with an upcast from dev. Signed-off-by:
-
Thomas Zimmermann authored
Replace all references to struct drm_device's pdev field with an upcast from dev. Signed-off-by:
-
Thomas Zimmermann authored
Replace all references to struct drm_device's pdev field with an upcast from dev. Signed-off-by:
-
Christian König authored
Drop the special handling here. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430092508.60710-3-christian.koenig@amd.com
-
Christian König authored
Init all fields in ttm_resource_alloc() when we create a new resource. v2: use place->mem_type instead of res->mem_type Signed-off-by:
-
Christian König authored
Add a separate manager for the system domain and make function tables mandatory. v2: debug is still optional v3: return void during init Signed-off-by:
-
Christian König authored
Audit the includes and stop accessing the internal drm_mm_node. The ttm_resource::start is the same value as the drm_mm_node::start. Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210426175824.122557-1-christian.koenig@amd.com
-
Simon Ser authored
Force-probing a connector can be slow and cause flickering. As this affects the global KMS state, let's make it so only the DRM master can force-probe a connector. Non-master DRM clients won't be able to force-probe a connector anymore. Instead, KMS will perform a regular read-only connector query. Signed-off-by:
Simon Ser <contact@emersion.fr> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210402112212.5625-1-contact@emersion.fr
-
- 01 May, 2021 5 commits
-
-
Thomas Zimmermann authored
We register the simplekms device with the DRM platform helpers. A native driver for the graphics hardware will kick-out the simpledrm driver before taking over the device. The original generic platform device from the simple-framebuffer boot code will be unregistered. The native driver will use whatever native hardware device it received. v4: * convert to drm_aperture_acquire_from_firmware() v3: * use platform_device_unregister() and handle detachment like hot-unplug event (Daniel) v2: * adapt to aperture changes * use drm_dev_unplug() and drm_dev_enter/exit() * don't split error string Signed-off-by:
nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by:
-
Thomas Zimmermann authored
Platform devices might operate on firmware framebuffers, such as VESA or EFI. Before a native driver for the graphics hardware can take over the device, it has to remove any platform driver that operates on the firmware framebuffer. Aperture helpers provide the infrastructure for platform drivers to acquire firmware framebuffers, and for native drivers to remove them later on. It works similar to the related fbdev mechanism. During initialization, the platform driver acquires the firmware framebuffer's I/O memory and provides a callback to be removed. The native driver later uses this information to remove any platform driver for it's framebuffer I/O memory. The aperture removal code is integrated into the existing code for removing conflicting framebuffers, so native drivers use it automatically. v5: * fix build error introduced by rebasing v4 * fix typo in documentation v4: * hide detach callback in implementation (Daniel) * documentation fixes v3: * rebase onto existing aperture infrastructure * release aperture from list during detach; fix dangling apertures * don't export struct drm_aperture * document struct drm_aperture_funcs v2: * rename plaform helpers to aperture helpers * tie to device lifetime with devm_ functions * removed unsued remove() callback * rename kickout to detach * make struct drm_aperture private * rebase onto existing drm_aperture.h header file * use MIT license only for simplicity * documentation Signed-off-by:
-
Thomas Zimmermann authored
The blitter functions copy a framebuffer to I/O memory using one of the existing conversion functions. Signed-off-by:
-
Thomas Zimmermann authored
The memcpy's destination buffer might have a different pitch than the source. Support different pitches as function argument. Signed-off-by:
-
- 30 Apr, 2021 6 commits
-
-
Nikola Cornij authored
[why] Previously used value was not safe to provide the correct value, i.e. it could be 0 if not not configured, leading to no MST on this platform. [how] Do not use the value from BIOS, but from the structure populated at encoder initialization time. Fixes: 98025a62 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space") Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [fixed open coded drm_dp_link_rate_to_bw_code()] Signed-off-by:
-
Douglas Anderson authored
In commit 3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") we started using pm_runtime, but my patch neglected to add the proper pm_runtime_disable(). Doh! Add them now. Fixes: 3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.1.I9e6af2529d6c61e5daf86a15a1211121c5223b9a@changeid
-
Liu Ying authored
Some MIPI DSI panel drivers like 'raydium,rm68200' send MIPI_DCS_SET_DISPLAY_ON commands in panel_funcs->prepare(), which requires the MIPI DSI controller and PHY to be ready beforehand. Without this patch, the nwl-dsi driver gets the MIPI DSI controller and PHY ready in bridge_funcs->atomic_pre_enable(), which happens after the panel_funcs->prepare(). So, this patch shifts the bridge operation ealier from bridge_funcs->atomic_pre_enable() to bridge_funcs->mode_set(). This way, more MIPI DSI panels can connect to this nwl-dsi bridge. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Liu Ying authored
The check on unchanged HS clock rate in ->mode_set() improves the callback's performance a bit by early return. However, the up-coming patch would get MIPI DSI controller and PHY ready in ->mode_set() after that check, thus likely skipped. So, this patch removes that check to make sure MIPI DSI controller and PHY will be brought up and taken down from ->mode_set() and ->atomic_disable() respectively in pairs. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
-
Liu Ying authored
This patch replaces ->mode_fixup() with ->atomic_check() so that a full modeset can be requested from there when crtc_state->active is changed to be true(which implies only connector's DPMS is brought out of "Off" status, though not necessarily). Bridge functions are added or changed to accommodate the ->atomic_check() callback. That full modeset is needed by the up-coming patch which gets MIPI DSI controller and PHY ready in ->mode_set(), because it makes sure ->mode_set() and ->atomic_disable() are called in pairs. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Samsung LMS397KF04 RGB DPI display panel. Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
- 29 Apr, 2021 16 commits
-
-
Nikola Cornij authored
[why] DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is set, Extended Base Receiver Capability DPCD space must be used. Without doing that, the three DPCD values that differ will be wrong, leading to incorrect or limited functionality. MST link rate, for example, could have a lower value. Also, Synaptics quirk wouldn't work out well when Extended DPCD was not read, resulting in no DSC for such hubs. [how] Modify MST topology manager to use the values from Extended DPCD where applicable. To prevent regression on the sources that have a lower maximum link rate capability than MAX_LINK_RATE from Extended DPCD, have the drivers supply maximum lane count and rate at initialization time. This also reverts commit 2dcab875 ("Revert drm/dp_mst: Retrieve extended DPCD caps for topology manager"), brining the change back to the original commit ad44c032 ("drm/dp_mst: Retrieve extended DPCD caps for topology manager"). Signed-off-by:
-
Melissa Wen authored
Add support to overlay plane, in addition to primary and cursor planes. In this approach, the plane composition still requires an active primary plane and planes are composed associatively in the order: (primary <- overlay) <- cursor It enables to run the following IGT tests successfully: - kms_plane_cursor: - pipe-A-[overlay, primary, viewport]-size-[64, 128, 256] - kms_atomic: - plane-overlay-legacy and preserves the successful execution of kms_cursor_crc, kms_writeback and kms_flip Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
-
Melissa Wen authored
Add support for composing XRGB888 planes in addition to the ARGB8888 format. In the case of an XRGB plane at the top, the composition consists of copying the RGB values of a pixel from src to dst and clearing alpha channel, without the need for alpha blending operations for each pixel. Blend equations assume a completely opaque background, i.e., primary plane is not cleared before pixel blending but alpha channel is explicitly opaque (a = 0xff). Also, there is room for performance evaluation in switching pixel blend operation according to the plane format. v4: - clear alpha channel (0xff) after blend color values by pixel - improve comments on blend ops to reflect the current state - describe in the commit message future improvements for plane composition Signed-off-by:
-
Melissa Wen authored
Generalize variables and function names used for planes composition (from cursor to plane), since we will reuse the operations for both cursor and overlay types. No functional change. v4: - use better names for functions of plane composition (Daniel) Signed-off-by:
-
Melissa Wen authored
By using drmm_universal_plane_alloc instead of drm_universal_plane_init, we let the DRM infrastructure handles resource allocation and cleanup. We can also get rid of some code repetitions for plane cleanup, improving code maintainability in vkms. Signed-off-by:
-
Thomas Zimmermann authored
Struct drm_device.pdev is being moved to legacy status as only legacy DRM drivers use it. A possible follow-up patchset could remove pdev entirely. v4: * rebased Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Don't assign it. Users should upcast from struct drm_device.dev. v6: * also fix the assignment in selftests in this patch (Chris) Signed-off-by:
-
Thomas Zimmermann authored
References to struct drm_device.pdev should not be used any longer as the field will be moved into the struct's legacy section. Fix a rsp comment. v8: * fix commit message (Michael) Signed-off-by:
-
Thomas Zimmermann authored
References to struct drm_device.pdev should not be used any longer as the field will be moved into the struct's legacy section. Add a fix for the rsp commit. v8: * fix commit message (Michael) Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Upcast with to_pci_dev() from struct drm_device.dev to get the PCI device structure. v9: * fix remaining pdev references Signed-off-by:
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier for this driver. The idr_alloc for this driver uses 1 as start value for ID range. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused / available. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105190718.GA89863@localhost
-
Bernard Zhao authored
Use min_t to replace min, min_t is a bit fast because min use twice typeof. This patch also fix check_patch.pl warning: WARNING: min() should probably be min_t(unsigned long, num_pages, VMW_PPN_PER_REMAP) +unsigned long nr = min(num_pages, (unsigned long) VMW_PPN_PER_REMAP); Signed-off-by:
Bernard Zhao <bernard@vivo.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Zou Wei authored
Suppresses the following coccinelle warning: drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:85:15-22: WARNING use flexible-array member instead Signed-off-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/particuar/particular/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Dan Carpenter authored
Cppcheck complains that the declaration doesn't match the function definition. Obviously "left" should come before "right". The caller and the function implementation are done this way, it's just the declaration which is wrong so this doesn't affect runtime. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 28 Apr, 2021 2 commits
-
-
Hsin-Yi Wang authored
>From anx7625 spec, the delay between powering on power supplies and gpio should be larger than 10ms. Fixes: 6c744983 ("drm/bridge: anx7625: disable regulators when power off") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210428115116.931328-1-hsinyi@chromium.org
-
Randy Dunlap authored
Insert a missing word "power" in Kconfig help text. Fixes: 6aa19269 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by:
-
- 27 Apr, 2021 1 commit
-
-
Lyude Paul authored
And finally, convert all of the code in drm_dp_mst_topology.c over to using drm_err() and drm_dbg*(). Note that this refactor would have been a lot more complicated to have tried writing a coccinelle script for, so this whole thing was done by hand. v2: * Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit() Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
