`strncpy` is deprecated for use on NUL-terminated destination strings [1].

We should prefer more robust and less ambiguous string interfaces.

We expect name to be NUL-terminated based on its numerous uses with
functions that expect NUL-terminated strings.

For example in i2c-core-base.c +1533:
| dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);

NUL-padding is not required as `adap` is already zero-alloacted with:
| adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);

With the above in mind, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Advertise our coding style by following it :)
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

debugfs can handle error pointers in subsequent calls. So, remove the
error checks as suggested by kerneldoc of this function.
Reported-by: Minjie Du <duminjie@vivo.com>
Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20230713101829.15548-1-duminjie@vivo.com/Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

With some new registers, SCL can be calculated to be closer to the
desired rate. Apply the new formula for R-Car Gen3 device types.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Initially, we only needed a reset controller to make sure RXDMA works at
least once per transfer. Meanwhile, documentation has been updated. It
now says that a reset has to be performed prior every transaction, even
if it is non-DMA. So, make the reset controller a requirement instead of
being optional. And bail out if resetting fails.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

I2C core ensures in i2c_smbus_xfer() that the I2C bus lock is held when
calling the smbus_xfer callback. That's i801_access() in our case.
I think it's safe in general to assume that the I2C bus lock is held
when the smbus_xfer callback is called.
Therefore I see no need to define an own mutex.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

When entering the suspend callback, at first we should ensure that
transfers are finished and I2C core can't start further transfers.
Use i2c_mark_adapter_suspended() for this purpose, and complement it
with a call to i2c_mark_adapter_resumed() in the resume path.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Now that the driver core allows for struct class to be in read-only
memory, move the i2c_dev_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Using the I2C host controller on the MT7981 SoC requires 4 clocks to
be enabled. One of them, the pmic clk, is only enabled in case
'mediatek,have-pmic' is also set which has other consequences which
are not desired in this case.

Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty
is not present and the bus is not used to connect to a pmic, but may
still require to enable the pmic clock.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Simplify the module boilerplate code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

In few places relevant registers are reset to their initial value on
driver load. Factor this out to new helper i801_restore_regs to avoid
code duplication.
Even though no actual problems are known, this patch may contribute
to avoiding potential issues by:
- restoring register values also in the error path of i2c_add_adapter
- making restoring registers the last step (especially in i801_remove)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN
parameter.
In this case, when the TX FIFO gets empty and the last command didn't have
the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until
a new command is pushed into the TX FIFO or the transfer is aborted.

When the controller is holding SCL low, it cannot be disabled.
The transfer must first be aborted.
Also, the bus recovery won't work because SCL is held low by the master.

Check if the master is holding SCL low in __i2c_dw_disable() before trying
to disable the controller. If SCL is held low, an abort is initiated.
When the abort is done, then proceed with disabling the controller.

This whole situation can happen for instance during SMBus read data block
if the slave just responds with "byte count == 0".
This puts the driver in an unrecoverable state, because the controller is
holding SCL low and the current __i2c_dw_disable() procedure is not
working. In this situation only a SoC reset can fix the i2c bus.
Co-developed-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'ib-mfd-i2c-reboot-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into i2c/for-mergewindow

Immutable branch between MFD, I2C and Reboot due for the v6.7 merge window

Value comes from DT, so it could be 0. Unlikely, but could be.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

It improves readability if we use the available helper.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Instead of trying all values, we can actually compute it as the comment
suggests. It is unclear what the comment means with "involved", it works
nicely.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Use proper types and spacing.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Kernel functions goto somewhere on error conditions. Using goto for the
default path is irritating. Let's bail out on error instead and use a
proper retval.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

We have to unregister tco_pdev also if i2c_add_adapter() fails.

Fixes: 94246930 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Currently we set SMBHSTCNT_LAST_BYTE only after the host has started
receiving the last byte. If we get e.g. preempted before setting
SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte
before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing
SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code
is also consistent with what we do in i801_isr_byte_done().
Reported-by: Jean Delvare <jdelvare@suse.com>
Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/
Cc: stable@vger.kernel.org
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - Fix an UV boot crash

   - Skip spurious ENDBR generation on _THIS_IP_

   - Fix ENDBR use in putuser() asm methods

   - Fix corner case boot crashes on 5-level paging

   - and fix a false positive WARNING on LTO kernels"

* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/purgatory: Remove LTO flags
  x86/boot/compressed: Reserve more memory for page tables
  x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
  x86/ibt: Suppress spurious ENDBR
  x86/platform/uv: Use alternate source for socket to node data

Pull scheduler fixes from Ingo Molnar:
 "Fix a performance regression on large SMT systems, an Intel SMT4
  balancing bug, and a topology setup bug on (Intel) hybrid processors"

* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
  sched/fair: Fix SMT4 group_smt_balance handling
  sched/fair: Optimize should_we_balance() for large SMT systems

Pull objtool fix from Ingo Molnar:
 "Fix a cold functions related false-positive objtool warning that
  triggers on Clang"

* tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix _THIS_IP_ detection for cold functions

Pull WARN fix from Ingo Molnar:
 "Fix a missing preempt-enable in the WARN() slowpath"

* tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  panic: Reenable preemption in WARN slowpath

The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971 ("vfs: de-crapify "cp_new_stat()" function").

Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place.  So commit 932aba1e ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.

But the helpers remained around, unused.

Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smb client fixes from Steve French:
 "Three small SMB3 client fixes, one to improve a null check and two
  minor cleanups"

* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix some minor typos and repeated words
  smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
  smb3: move server check earlier when setting channel sequence number

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes"

* tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd:
  ksmbd: fix passing freed memory 'aux_payload_buf'
  ksmbd: remove unneeded mark_inode_dirty in set_info_sec()

Pull ext4 fixes from Ted Ts'o:
 "Regression and bug fixes for ext4"

* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix rec_len verify error
  ext4: do not let fstrim block system suspend
  ext4: move setting of trimmed bit into ext4_try_to_trim_range()
  jbd2: Fix memory leak in journal_init_common()
  jbd2: Remove page size assumptions
  buffer: Make bh_offset() work for compound pages

-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates
multiple .text sections for purgatory.ro:

  $ readelf -S purgatory.ro  | grep " .text"
    [ 1] .text             PROGBITS         0000000000000000  00000040
    [ 7] .text.purgatory   PROGBITS         0000000000000000  000020e0
    [ 9] .text.warn        PROGBITS         0000000000000000  000021c0
    [13] .text.sha256_upda PROGBITS         0000000000000000  000022f0
    [15] .text.sha224_upda PROGBITS         0000000000000000  00002be0
    [17] .text.sha256_fina PROGBITS         0000000000000000  00002bf0
    [19] .text.sha224_fina PROGBITS         0000000000000000  00002cc0

This causes WARNING from kexec_purgatory_setup_sechdrs():

  WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
  kexec_load_purgatory+0x37f/0x390

Fix this by disabling LTO for purgatory.

[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]

We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.

Fixes: b33fff07 ("x86, build: allow LTO to be selected")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org

The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.

The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.

In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.

Update wost-case calculations to include 5-level paging.

To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.

[ Also add a warning, should this memory run low - by Dave Hansen. ]

Fixes: 34bbb000 ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com

Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix kernel-devel RPM and linux-headers Deb package

 - Fix too long argument list error in 'make modules_install'

* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: avoid long argument lists in make modules_install
  kbuild: fix kernel-devel RPM package and linux-headers Deb package

Commit 408579cd ("mm: Update do_vmi_align_munmap() return
semantics") seems to have updated one of the callers of do_vmi_munmap()
incorrectly: it used to check for the error case (which didn't
change: negative means error).

That commit changed the check to the success case (which did change:
before that commit, 0 was success, and 1 was "success and lock
downgraded".  After the change, it's always 0 for success, and the lock
will have been released if requested).

This didn't change any actual VM behavior _except_ for memory accounting
when 'VM_ACCOUNT' was set on the vma.  Which made the wrong return value
test fairly subtle, since everything continues to work.

Or rather - it continues to work but the "Committed memory" accounting
goes all wonky (Committed_AS value in /proc/meminfo), and depending on
settings that then causes problems much much later as the VM relies on
bogus statistics for its heuristics.

Revert that one line of the change back to the original logic.

Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics")
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "16 small(ish) fixes all in drivers.

  The major fixes are in pm8001 (fixes MSI-X issue going back to its
  origin), the qla2xxx endianness fix, which fixes a bug on big endian
  and the lpfc ones which can cause an oops on module removal without
  them"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports
  scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
  scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file()
  scsi: target: core: Fix target_cmd_counter leak
  scsi: pm8001: Setup IRQs on resume
  scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
  scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
  scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command
  scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock
  scsi: qedf: Add synchronization between I/O completions and abort
  scsi: target: Replace strlcpy() with strscpy()
  scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir()
  scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
  scsi: qla2xxx: Correct endianness for rqstlen and rsplen
  scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
  scsi: megaraid_sas: Fix deadlock on firmware crashdump

Pull ata fixes from Damien Le Moal:

 - Fix link power management transitions to disallow unsupported states
   (Niklas)

 - A small string handling fix for the sata_mv driver (Christophe)

 - Clear port pending interrupts before reset, as per AHCI
   specifications (Szuying).

   Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
   ata_eh_reset() to allow EH to continue on with other actions recorded
   with error interrupts triggered before EH completes. And an
   additional fix to avoid thawing a port twice in EH (Niklas)

 - Small code style fixes in the pata_parport driver to silence the
   build bot as it keeps complaining about bad indentation (me)

 - A fix for the recent CDL code to avoid fetching sense data for
   successful commands when not necessary for correct operation (Niklas)

* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-core: fetch sense data for successful commands iff CDL enabled
  ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  ata: pata_parport: Fix code style issues
  ata: libahci: clear pending interrupt status
  ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  ata: libata: disallow dev-initiated LPM transitions to unsupported states

Pull USB fix from Greg KH:
 "Here is a single USB fix for a much-reported regression for 6.6-rc1.

  It resolves a crash in the typec debugfs code for many systems. It's
  been in linux-next with no reported issues, and many people have
  reported it resolving their problem with 6.6-rc1"

* tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Fix NULL pointer dereference

Pull driver core fixes from Greg KH:
 "Here is a single driver core fix for a much-reported-by-sysbot issue
  that showed up in 6.6-rc1. It's been submitted by many people, all in
  the same way, so it obviously fixes things for them all.

  Also in here is a single documentation update adding riscv to the
  embargoed hardware document in case there are any future issues with
  that processor family.

  Both of these have been in linux-next with no reported problems"

* tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V
  driver core: return an error when dev_set_name() hasn't happened

Pull char/misc fix from Greg KH:
 "Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
  comedi subsystem that has ended up being incorrect and caused drivers
  that were working for people to be unable to be able to be selected to
  build at all.

  To fix this, the Kconfig change needs to be reverted and a future set
  of fixes for the ioport dependancies will show up in 6.7-rc1 (there's
  no rush for them.)

  This has been in linux-next with no reported issues"

* tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "comedi: add HAS_IOPORT dependencies"

Pull i2c fixes from Wolfram Sang:
 "The main thing is the removal of 'probe_new' because all i2c client
  drivers are converted now. Thanks Uwe, this marks the end of a long
  conversion process.

  Other than that, we have a few Kconfig updates and driver bugfixes"

* tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Fix the kernel-doc warnings
  i2c: aspeed: Reset the i2c controller when timeout occurs
  i2c: I2C_MLXCPLD on ARM64 should depend on ACPI
  i2c: Make I2C_ATR invisible
  i2c: Drop legacy callback .probe_new()
  w1: ds2482: Switch back to use struct i2c_driver's .probe()