- 03 Apr, 2024 2 commits
-
-
Po-Hao Huang authored
8922a FW supports RNR parsing, provide template probe requests and let FW do the replacement for SSID/BSSID/short SSIDs. Don't declare WIPHY_FLAG_SPLIT_SCAN_6GHZ so proper IEs such as 6 GHz capabilities can be passed down within the same scan request. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240328052656.18823-3-pkshih@realtek.com
-
Chih-Kang Chang authored
Update scan offload H2C length to fit new FW format. This change is required after FW version 0.35.15.0. Since the first release of firmware is 0.35.18.0, we don't maintain backward compatibility. Signed-off-by:
Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by:
-
- 29 Mar, 2024 1 commit
-
-
Ping-Ke Shih authored
Since only station mode has been tested on SDIO chips, only keep it support for SDIO chips to reflect correct supported features. Link: https://lore.kernel.org/linux-wireless/87wmpu1do6.fsf@kernel.org/T/#t Link: https://lore.kernel.org/linux-wireless/36972ff5-0c48-4bd2-8f9a-9649bfa24225@lexina.in/ Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
- 26 Mar, 2024 2 commits
-
-
Chia-Yuan Li authored
The hardware command parser of txptctrl (TX protocol control) has overly stringent timeout conditions, which results in false alarm. So disable it. Signed-off-by:
Chia-Yuan Li <leo.li@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
Fix Wi-Fi 2.4Ghz throughput drop over than 40% when Bluetooh is idle. The code flow will read registers during Wi-Fi power saving, and be returned, which results in incorrect counters to do mechanism judgment. Adjust the code flow. Will leave Wi-Fi power save mode first then update counters. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
- 22 Mar, 2024 2 commits
-
-
Dmitry Antipov authored
In 'rtl92cu_set_hw_reg()', always assume that QoS mode is enabled as it was hardcoded since an initial commit. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
-
Dmitry Antipov authored
Since WMM support was never actually implemented and related TODO is more than 13 years old, it might be reasonable to remove all of the WMM stubs from rtl8192cu and simplify related code. Minor comment style adjustments suggested by checkpatch.pl, compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
-
- 20 Mar, 2024 1 commit
-
-
Martin Kaistra authored
In order to connect to networks which require 802.11w, add the MFP_CAPABLE flag and let mac80211 do the actual crypto in software. When a robust management frames is received, rx_dec->swdec is not set, even though the HW did not decrypt it. Extend the check and don't set RX_FLAG_DECRYPTED for these frames in order to use SW decryption. Signed-off-by:
Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by:
-
- 18 Mar, 2024 1 commit
-
-
Víctor Gonzalo authored
The module metadata for the firmware file mrvl/sd8801_uapsta.bin is missing. Signed-off-by:
Víctor Gonzalo <victor.gonzalo@anddroptable.net> Acked-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240313183156.2234301-1-victor.gonzalo@anddroptable.net
-
- 14 Mar, 2024 16 commits
-
-
Fiona Klute authored
This driver uses the new rtw8703b chip driver code. Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Fiona Klute <fiona.klute@gmx.de> Signed-off-by:
-
Fiona Klute authored
Sometimes 8703b firmware is still active from previous use when the driver needs to download the firmware during MAC activation. Reset it in that case. Acked-by:
-
Fiona Klute authored
Initialization tables for rtw8703b: Initial register values and TX power limits. Acked-by:
-
Fiona Klute authored
Initialization table definitions for rtw8703b. Acked-by:
-
Fiona Klute authored
This is the main source for the new rtw88_8703b chip driver. Acked-by:
-
Fiona Klute authored
This is the main header for the new rtw88_8703b chip driver. Acked-by:
-
Fiona Klute authored
default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by:
-
Fiona Klute authored
Some 8703b chips contain invalid EFUSE data, getting detailed information is critical when analyzing issues caused by that. Acked-by:
-
Fiona Klute authored
The already supported 8723d chip is very similar to 8703b/8723cs, split code that can be shared into a new module. The spec definition tables are combined into a struct so we only need one EXPORT_SYMBOL for them all. Acked-by:
-
Ping-Ke Shih authored
Add 8922AE to Makefile and Kconfig. Currently, it can support STA, AP and monitor modes with good performance. Implemented initial BT-coexistence function only, and will to fine tune this component. Signed-off-by:
-
Ching-Te Ku authored
Implement the chip operation function for 8922a, it related to TX power, RX gain, antenna position, packet priority and so on. Also assign coexistence priority table for hardware PTA using. Add settings to avoid uncertainties propagation when Wi-Fi Rx due to RF gain mismatch. Signed-off-by:
-
Ching-Te Ku authored
In order to packet up the slots information, the TLV header has updated. TDMA slot parameters also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by:
-
Ching-Te Ku authored
In order to packet up the slots information, the TLV header has updated. TDMA also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by:
-
Ching-Te Ku authored
Because there is new hardware structure and Wi-Fi 7 protocol, the antenna settings need to concern more complex for Wi-Fi 7 using. The antenna setting included grant control signal, they decide which MAC/Port or Bluetooth can do traffic. Signed-off-by:
-
Ching-Te Ku authored
In order to control the hardware band and related protocol control, add version 8 format and related logic to control the mechanism. Signed-off-by:
-
Randy Dunlap authored
Having an empty default: case in a switch statement causes a warning (when using Clang; I don't see the warning when using gcc), so add a "break;" to the default case to prevent the warning: drivers/ssb/main.c:1149:2: warning: label at end of compound statement is a C2x extension [-Wc2x-extensions] Fixes: e27b02e2 ("ssb: drop use of non-existing CONFIG_SSB_DEBUG symbol") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403130717.TWm17FiD-lkp@intel.com/ Cc: Michael Büsch <m@bues.ch> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: llvm@lists.linux.dev Acked-by:
Michael Büsch <m@bues.ch> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
- 12 Mar, 2024 6 commits
-
-
Randy Dunlap authored
CONFIG_SSB_DEBUG is used in one header file and nowhere else, so remove it and the now-empty inline function that contained it. Also remove the call to the empty inline function. The empty "default:" case is kept to prevent 2 compiler warnings: drivers/ssb/main.c:1133:9: warning: enumeration value 'SSB_BUSTYPE_PCMCIA' not handled in switch [-Wswitch] drivers/ssb/main.c:1133:9: warning: enumeration value 'SSB_BUSTYPE_SDIO' not handled in switch [-Wswitch] Reported-by:
Ying Sun <sunying@isrc.iscas.ac.cn> Link: https://lore.kernel.org/lkml/4e8525fe.607e2.18a8ddfdce8.Coremail.sunying@isrc.iscas.ac.cn/Signed-off-by:
-
Marek Vasut authored
CYW43439 is a Wi-Fi + Bluetooth combo device from Infineon. The WiFi part is capable of 802.11 b/g/n. This chip is present e.g. on muRata 1YN module. Extend the binding with its DT compatible. Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Duoming Zhou authored
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. Fixes: 91918ce8 ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device") Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
-
Rand Deeb authored
The ssb_device_uevent() function first attempts to convert the 'dev' pointer to 'struct ssb_device *'. However, it mistakenly dereferences 'dev' before performing the NULL check, potentially leading to a NULL pointer dereference if 'dev' is NULL. To fix this issue, move the NULL check before dereferencing the 'dev' pointer, ensuring that the pointer is valid before attempting to use it. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Rand Deeb <rand.sec96@gmail.com> Signed-off-by:
-
Dian-Syuan Yang authored
We used EHT capability of 20MHz-only as rate mask to RA (rate adaptive) H2C command when connecting with AP set EHT 20MHz. It would get the wrong rate mask and the MCS rate can only reach MCS11. According to the description of 802.11be spec, if all supported channel bandwidth field of HE PHY capabilities are zero, then the EHT capability of 20MHz-only is valid. As a result, we adjust the code to set correct rate mask based on HE PHY bandwidth capability. Signed-off-by:
Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by:
-
- 11 Mar, 2024 7 commits
-
-
David S. Miller authored
Herve Codina says: ==================== Add support for QMC HDLC This series introduces the QMC HDLC support. Patches were previously sent as part of a full feature series and were previously reviewed in that context: "Add support for QMC HDLC, framer infrastructure and PEF2256 framer" [1] In order to ease the merge, the full feature series has been split and needed parts were merged in v6.8-rc1: - "Prepare the PowerQUICC QMC and TSA for the HDLC QMC driver" [2] - "Add support for framer infrastructure and PEF2256 framer" [3] This series contains patches related to the QMC HDLC part (QMC HDLC driver): - Introduce the QMC HDLC driver (patches 1 and 2) - Add timeslots change support in QMC HDLC (patch 3) - Add framer support as a framer consumer in QMC HDLC (patch 4) Compare to the original full feature series, a modification was done on patch 3 in order to use a coherent prefix in the commit title. I kept the patches unsquashed as they were previously sent and reviewed. Of course, I can squash them if needed. Compared to the previous iteration: https://lore.kernel.org/linux-kernel/20240306080726.167338-1-herve.codina@bootlin.com/ this v7 series mainly: - Rename a variable. - Fix reverse xmas tree declarations. - Add 'Acked-by' tag. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herve Codina authored
Add framer support in the fsl_qmc_hdlc driver in order to be able to signal carrier changes to the network stack based on the framer status Also use this framer to provide information related to the E1/T1 line interface on IF_GET_IFACE and configure the line interface according to IF_IFACE_{E1,T1} information. Signed-off-by:Herve Codina <herve.codina@bootlin.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Herve Codina authored
QMC channels support runtime timeslots changes but nothing is done at the QMC HDLC driver to handle these changes. Use existing IFACE ioctl in order to configure the timeslots to use. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
-
Andy Shevchenko authored
These helpers scatters or gathers a bitmap with the help of the mask position bits parameter. bitmap_scatter() does the following: src: 0000000001011010 |||||| +------+||||| | +----+|||| | |+----+||| | || +-+|| | || | || mask: ...v..vv...v..vv ...0..11...0..10 dst: 0000001100000010 and bitmap_gather() performs this one: mask: ...v..vv...v..vv src: 0000001100000010 ^ ^^ ^ 0 | || | 10 | || > 010 | |+--> 1010 | +--> 11010 +----> 011010 dst: 0000000000011010 bitmap_gather() can the seen as the reverse bitmap_scatter() operation. Signed-off-by:Yury Norov <yury.norov@gmail.com> Signed-off-by:
-
Herve Codina authored
After contributing the driver, add myself as the maintainer for the Freescale QMC HDLC driver. Signed-off-by:
-
Herve Codina authored
The QMC HDLC driver provides support for HDLC using the QMC (QUICC Multichannel Controller) to transfer the HDLC data. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== ethtool: ice: Support for RSS settings to GTP Takeru Hayasaka enables RSS functionality for GTP packets on ice driver with ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. ==================== Signed-off-by:
-
- 09 Mar, 2024 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== Support Multi-PF netdev (Socket Direct) This series adds support for combining multiple devices (PFs) of the same port under one netdev instance. Passing traffic through different devices belonging to different NUMA sockets saves cross-numa traffic and allows apps running on the same netdev from different numas to still feel a sense of proximity to the device and achieve improved performance. We achieve this by grouping PFs together, and creating the netdev only once all group members are probed. Symmetrically, we destroy the netdev once any of the PFs is removed. The channels are distributed between all devices, a proper configuration would utilize the correct close numa when working on a certain app/cpu. We pick one device to be a primary (leader), and it fills a special role. The other devices (secondaries) are disconnected from the network in the chip level (set to silent mode). All RX/TX traffic is steered through the primary to/from the secondaries. Currently, we limit the support to PFs only, and up to two devices (sockets). * tag 'mlx5-socket-direct-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: Documentation: networking: Add description for multi-pf netdev net/mlx5: Enable SD feature net/mlx5e: Block TLS device offload on combined SD netdev net/mlx5e: Support per-mdev queue counter net/mlx5e: Support cross-vhca RSS net/mlx5e: Let channels be SD-aware net/mlx5e: Create EN core HW resources for all secondary devices net/mlx5e: Create single netdev per SD group net/mlx5: SD, Add debugfs net/mlx5: SD, Add informative prints in kernel log net/mlx5: SD, Implement steering for primary and secondaries net/mlx5: SD, Implement devcom communication and primary election net/mlx5: SD, Implement basic query and instantiation net/mlx5: SD, Introduce SD lib net/mlx5: Add MPIR bit in mcam_access_reg ==================== Link: https://lore.kernel.org/r/20240307084229.500776-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - hci_conn: Only do ACL connections sequentially - hci_core: Cancel request on command timeout - Remove CONFIG_BT_HS - btrtl: Add the support for RTL8852BT/RTL8852BE-VT - btusb: Add support Mediatek MT7920 - btusb: Add new VID/PID 13d3/3602 for MT7925 - Add new quirk for broken read key length on ATS2851 * tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (52 commits) Bluetooth: hci_sync: Fix UAF in hci_acl_create_conn_sync Bluetooth: Fix eir name length Bluetooth: ISO: Align broadcast sync_timeout with connection timeout Bluetooth: Add new quirk for broken read key length on ATS2851 Bluetooth: mgmt: remove NULL check in add_ext_adv_params_complete() Bluetooth: mgmt: remove NULL check in mgmt_set_connectable_complete() Bluetooth: btusb: Add support Mediatek MT7920 Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922 Bluetooth: btnxpuart: Fix btnxpuart_close Bluetooth: ISO: Clean up returns values in iso_connect_ind() Bluetooth: fix use-after-free in accessing skb after sending it Bluetooth: af_bluetooth: Fix deadlock Bluetooth: bnep: Fix out-of-bound access Bluetooth: btusb: Fix memory leak Bluetooth: msft: Fix memory leak Bluetooth: hci_core: Fix possible buffer overflow Bluetooth: btrtl: fix out of bounds memory access Bluetooth: hci_h5: Add ability to allocate memory for private data Bluetooth: hci_sync: Fix overwriting request callback Bluetooth: hci_sync: Use QoS to determine which PHY to scan ... ==================== Link: https://lore.kernel.org/r/20240308181056.120547-1-luiz.dentz@gmail.comSigned-off-by:
-
