- 12 Nov, 2015 12 commits
-
-
Laurent Vivier authored
As devices with values greater than that are silently ignored, this gives some hints to the sys admin to know why he doesn't see his devices... Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
There is a static checker warning here because "bytes" is controlled by the user and we cap the upper bound with min() but allow negatives. Negative bytes will result in some nasty warning messages but are not super harmful. Anyway, no one needs negative bytes so let's just check for it and return NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alison Schofield authored
Replace the use of struct timeval and do_gettimeofday() with 64 bit ktime_get_real_seconds. Prevents 32-bit type overflow in year 2038 on 32-bit systems. Driver was using the seconds portion of struct timeval (.tv_secs) to pass a millseconds timestamp to the firmware. This change maintains that same behavior using ktime_get_real_seconds. The structure used to pass the timestamp to firmware is 48 bits and works fine as long as the top 16 bits are zero and they will be zero for a long time..ie. thousands of years. Alternative Change: Add sub second granularity to timestamp As noted above, the driver only used the seconds portion of timeval, ignores the microseconds portion, and by multiplying by 1000 effectively does a <<10 and always writes zero into timestamp[0]. The alternative change would pass all the bits to the firmware: struct timespec64 ts; ktime_get_real_ts64(&ts); timestamp = ts.tv_sec * MSEC_PER_SEC + ts.tv_nsec / NSEC_PER_MSEC; Signed-off-by:Alison Schofield <amsfield22@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Tina Ruchandani authored
struct mvumi_hs_page2 stores a "seconds_since1970" field which is of type u64. It is however, written to, using 'struct timeval' which has a 32-bit seconds field and whose value will overflow in year 2038. This patch uses ktime_get_real_seconds() instead since it provides a 64-bit seconds value, which is 2038 safe. Signed-off-by:
Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Tim Gardner authored
drivers/scsi/be2iscsi/be_main.c: In function 'be_sgl_create_contiguous': drivers/scsi/be2iscsi/be_main.c:3187:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] WARN_ON(!length > 0); gcc version 5.2.1 Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Cc: Minh Tran <minh.tran@avagotech.com> Cc: John Soni Jose <sony.john-n@avagotech.com> Cc: "James E.J. Bottomley" <JBottomley@odin.com> Reported-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Manoj Kumar <manoj@linux.vnet.ibm.com> Signed-off-by:
-
Vitaly Kuznetsov authored
The only user of scsi_prep_async_scan() is scsi_scan_host() and it handles the situation correctly. Move 'called twice' reporting to debug level as well. The issue is observed on Hyper-V: on any device add/remove event storvsc driver calls scsi_scan_host() and in case previous scan is still running we get the message and stack dump on console. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Tested-by:
Alex Ng <alexng@microsoft.com> Signed-off-by:
-
Sreekanth Reddy authored
Bump mpt3sas driver version to 09.102.00.00 Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Sreekanth Reddy authored
Modified the mpt3sas driver to have a single driver module which supports both SAS 2.0 & SAS 3.0 HBA devices. * Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table. * Created two separate SCSI host templates for SAS2 and SAS3 HBAs so that, during the driver load time driver can use corresponding host template(based the pci device ID) while registering a scsi host adapter instance for that pci device. * Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for SAS3 HBAs. Also updated the code to make sure that mpt2ctl device processes only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl device processes only those ioctl cmds issued for the SAS3 HBAs. * Added separate indexing for SAS2 and SAS3 HBAs. * Replaced compile time check 'MPT2SAS_SCSI' to run time check 'hba_mpi_version_belonged' whereever needed. * Aliased this merged driver to mpt2sas using MODULE_ALIAS. * Moved global varaible 'driver_name' to per adapter instance variable. * Created two raid function template and used corresponding raid function templates based on the run time check 'hba_mpi_version_belonged'. * Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and renamed it as mpt3sas_warpdrive.c. * Also renamed the functions in mpt3sas_warpdrive.c file to follow current driver function name convention. * Updated the Makefile to build mpt3sas_warpdrive.o file for these WarpDrive-specific functions. * Also in function mpt3sas_setup_direct_io(), used sector_div() API instead of division operator (which gives compilation errors on 32 bit machines). * Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file. * Added module parameter 'hbas_to_enumerate' which permits using this merged driver as a legacy mpt2sas driver or as a legacy mpt3sas driver. Here are the available options for this module parameter: 0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs 1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs 2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs * Removed mpt2sas entries from SCSI's Kconfig and Makefile files. Signed-off-by:
-
Sreekanth Reddy authored
Bump the mpt2sas driver version to 20.102.00.00 and Bump the mpt3sas driver version to 9.101.00.00. Signed-off-by:
-
Sreekanth Reddy authored
setpci reset on nytro warpdrive card along with sysfs access and cli ioctl access resulted in kernel oops 1. pci_access_mutex lock added to provide synchronization between IOCTL, sysfs, PCI resource handling path 2. gioc_lock spinlock to protect list operations over multiple controllers This patch is ported from commit 6229b414 ("mpt2sas: setpci reset kernel oops fix"). Signed-off-by:
-
Sreekanth Reddy authored
Added OEM Gen2 PnP ID branding names from mpt2sas driver. Signed-off-by:
-
Sreekanth Reddy authored
The fw_event_work struct is concurrently referenced at shutdown. Add a refcount to protect it and refactor the code to use it. Additionally, refactor _scsih_fw_event_cleanup_queue() such that it no longer iterates over the list without holding the lock since _firmware_event_work() concurrently deletes items from the list. This patch is ported from commit 008549f6 ("mpt2sas: Refcount fw_events and fix unsafe list usage"). These changes are also required for mpt3sas. Signed-off-by:
-
- 11 Nov, 2015 14 commits
-
-
Sreekanth Reddy authored
sas_device objects can be referenced concurrently throughout the driver. We need a way to make sure threads can't delete them out from under each other. This patch adds the refcount and refactors the code to use it. Additionally, we cannot iterate over the sas_device_list without holding the lock or we risk corrupting random memory if items are added or deleted as we iterate. This patch refactors _scsih_probe_sas() to use the sas_device_list in a safe way. This patch is ported from the following mpt2sas driver commit d224fe0d ("mpt2sas: Refcount sas_device objects and fix unsafe list usage"). Signed-off-by:
-
Sreekanth Reddy authored
A new sysfs shost attribute called "BMR_status" is implemented to report Backup Rail Monitor status. This attribute is located in: /sys/class/scsi_host/host#/BMR_status When reading this adapter attribute, the driver will output the state of GPIO[24]. It returns "0" if BMR is healthy and "1" for failure. If it returns an empty string then it means that there was an error while obtaining the BMR status. Check dmesg for what error has occurred. This sysfs shost attribute is mainly for WarpDrive controllers. This commit is a port of 6c265660 ("mpt2sas: Provide sysfs attribute to report Backup Rail Monitor Status"). Signed-off-by: -
Sreekanth Reddy authored
Ported the following list of WarpDrive-specific patches: 1. commit 0bdccdb0 ("mpt2sas: WarpDrive New product SSS6200 support added") 2. commit 82a45258 ("mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message") 3. commit ba96bd0b ("mpt2sas: Support for greater than 2TB capacity WarpDrive") 4. commit 4da7af94 ("mpt2sas: Do not retry a timed out direct IO for Warpdrive") 5. commit daeaa9df ("mpt2sas: Avoid type casting for direct I/O commands"). Also set the mpt2_ioctl_iocinfo adapter_type to: 1. MPT3_IOCTL_INTERFACE_SAS3 for Gen3 HBAs 2. MPT2_IOCTL_INTERFACE_SAS2_SSS6200 for Warp Drive 3. MPT2_IOCTL_INTERFACE_SAS2 for other Gen2 HBAs Signed-off-by:
-
Sreekanth Reddy authored
This patch stops the driver to invoke kthread (which remove the dead ioc) for some time while EEH recovery has started. This patch is a port of commit b4730fb6 ("mpt2sas: fix for driver fails EEH, recovery from injected pci bus error")'. Signed-off-by:
-
Sreekanth Reddy authored
1. Do not enable MSI-X vectors for SAS2008 B0 controllers 2. Enable a single MSI-X vector for the following controller: a. SAS2004 b. SAS2008 c. SAS2008_1 d. SAS2008_2 e. SAS2008_3 f. SAS2116_1 g. SAS2116_2 3. Enable Combined Reply Post Queue Support (i.e. 96 MSI-X vectors) for Gen3 Invader/Fury C0 and above revision HBAs 4. Enable Combined Reply Post Queue Support (i.e. 96 MSI-X vectors) for all Intruder and Cutlass HBAs Signed-off-by:
-
Sreekanth Reddy authored
Avoid sending PHYDISK_HIDDEN RAID action requests to SAS2 controllers since they don't support it. Also enable fast_path only for SAS3 HBAs. Signed-off-by:
-
Sreekanth Reddy authored
Gen2 HBAs use MPI scatter-gather lists whereas Gen3 HBAs use IEEE scatter-gather lists. Modify the common code part in such a way that it will build IEEE SGL tables for Gen3 HBAs and MPI SGL tables for Gen2 HBAs. Signed-off-by:
-
Sreekanth Reddy authored
Currently there is a logging level option provided for each of our drivers in the kernel configuration utility. Users can enable this option to get more verbose information. By default it is enabled. Only when this option is enabled will the functions which display the required information get compiled in. As we are merging the both drivers we can no longer provide this configuration option. Remove the SCSI_MPTXSAS_LOGGING entry from Kconfig and unconditionally enable logging (by removing the #ifdef CONFIG_SCSI_MPT3SAS_LOGGING preprocessor check conditions) so that all functions which are defined to display more verbose information get compiled in. Signed-off-by:
-
Sreekanth Reddy authored
1. Use 'hba_mpi_version_belonged' IOC varable to uniquely identify each individual generation driver functionality at runtime. 2. Declare global variable 'driver_name' and use this variable while reserving PCI regions and while allocating the IRQs. Signed-off-by:
-
Sreekanth Reddy authored
Remove .c and .h files which are no longer needed from mpt2sas driver. We are reusing this code from mpt3sas. Signed-off-by:
-
Sreekanth Reddy authored
1. Create a mpt2sas_module.c file for mpt2sas where GEN2 HBA devices register with PCI, SML, IOCTL subsystems. 2. Updated the Makefile to use the object files from mpt3sas folder. 3. Defined a compilation flag SCSI_MPT2SAS which can be used to not include those sections of code from mpt3sas driver which are not required for mpt2sas driver. 4. Inherited automatic diag buffer feature from mpt3sas driver. Signed-off-by:
-
Sreekanth Reddy authored
Created a mpt3sas_module.c file for mpt3sas driver where it can register SAS3 HBA devices with PCI, SML, IOCTL subsystems. Also removed the corresponding interfaces from mpt3sas_scsih.c file. Signed-off-by:
-
Sreekanth Reddy authored
1. Added mpt2sas driver related macros in mpt3sas header files 2. Made scsi host's, raid class', pci's, ioctl's callback functions global so that both drivers can use them. Signed-off-by:
-
Christoph Hellwig authored
Use a single set of the hardware description headers instead of having them in the source tree twice. Signed-off-by:
-
- 10 Nov, 2015 9 commits
-
-
Benjamin Rood authored
Previously, when this module was unloaded via 'rmmod' with at least one drive attached, the SCSI error handler thread would become stuck in an infinite recovery loop and lockup the system, necessitating a reboot. Once the SAS layer is detached, the driver will fail any subsequent commands since the target devices are removed. However, removing the SCSI host generates a SYNCHRONIZE CACHE (10) command, which was failed and left the error handler no method of recovery. This patch simply removes the SCSI host first so that no more commands can come down, prior to cleaning up the SAS layer. Note that the stack is built up with the SCSI host first, and then the SAS layer. Perhaps it should be reversed for symmetry, so that commands cannot be sent to the pm80xx driver prior to attaching the SAS layer? What was really strange about this bug was that it was introduced at commit cff549e4 ("[SCSI]: proper state checking and module refcount handling in scsi_device_get"). This commit appears to tinker with how the reference counting is performed for SCSI device objects. My theory is that prior to this commit, the refcount for a device object was blindly incremented at some point during the teardown process which coincidentially made the device stick around during the procedure, which also coincidentially made any commands sent to the driver not fail (since the device was technically still "there"). After this commit was applied, my theory is the refcount for the device object is not being incremented at a specific point anymore, which makes the device go away, and thus made the pm80xx driver fail any subsequent commands. You may also want to see the following for more details: [1] http://www.spinics.net/lists/linux-scsi/msg37208.html [2] http://marc.info/?l=linux-scsi&m=144416476406993&w=2Signed-off-by:
Benjamin Rood <brood@attotech.com> Acked-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Jack Wang authored
commit cff549e4 ("scsi: proper state checking and module refcount handling in scsi_device_get") the reference count of scsi device was changed, which could lead to when rmmod with at least on drive attached, SCSI error handle will run into infinite loop, and lockup the system. Fix it by remove scsi host first, this way scsi core will not send commands down after detaching SAS transport. This is a follow up fix for Benjamin's fix for pm80xx. See also: http://www.spinics.net/lists/linux-scsi/msg90088.htmlSigned-off-by:
-
Jack Wang authored
commit cff549e4 ("scsi: proper state checking and module refcount handling in scsi_device_get") the reference count of scsi device was changed, which could lead to when rmmod with at least on drive attached, SCSI error handle will run into infinite loop, and lockup the system. Fix it by remove scsi host first, this way scsi core will not send commands down after detaching SAS transport. This is a follow up fix for Benjamin's fix for pm80xx. See also: http://www.spinics.net/lists/linux-scsi/msg90088.htmlSigned-off-by:
-
Jack Wang authored
commit cff549e4 ("scsi: proper state checking and module refcount handling in scsi_device_get") , the reference count of scsi device was changed, which could lead to when rmmod with at least on drive attached, SCSI error handle will run into infinite loop, and lockup the system. Fix it by remove scsi host first, this way scsi core will not send commands down after detaching SAS transport. This is a follow up fix for Benjamin's fix for pm80xx. See also: http://www.spinics.net/lists/linux-scsi/msg90088.htmlSigned-off-by:
-
Gabriel Krisman Bertazi authored
Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
Some new adapters require a special Configure Cache Parameters command to enable the adapter write cache, so send this during the adapter initialization if the adapter requires it. Signed-off-by:
-
Gabriel Krisman Bertazi authored
Add an IOA Inquiry command for Page 0xC4 during IOA initialization to collect cache capabilities, particularly to check if Sync IOA Write Cache is supported. Inquiry will happen right after Cap Inquiry on page 0xD0; and will execute only if the "Supported Pages" field in Inquiry Page 0x0 shows support for Page 0xC4. Otherwise, assume Sync IOA Write Cache is not supported. Signed-off-by:
-
Gabriel Krisman Bertazi authored
According to the IPR specification, Inhibit Underlength Checking bit must be disabled when issuing commands to vsets. Enabling it in this case might cause SCSI commands to fail with an Illegal Request, so make sure we keep this bit cleared when resource is a vset. Signed-off-by:
-
Gabriel Krisman Bertazi authored
Add a holding pattern prior to collecting dump data, to wait for the IOA indication that the Mailbox register is stable and won't change without an explicit reset. This ensures we'll be collecting meaningful dump data, even when dumping right after an adapter reset. In the event of a timeout, we still force the dump, since a partial dump still might be useful. Signed-off-by:
-
- 09 Nov, 2015 5 commits
-
-
Yaniv Gardi authored
New revisions of UFS host controller supports the new UniPro hardware controller (referred as QUniPro). This patch adds the support to enable this new UniPro controller hardware. This change also adds power optimization for bus scaling feature, as well as support for HS-G3 power mode. Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by:
Gilad Broner <gbroner@codeaurora.org> Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by:
-
Yaniv Gardi authored
Adds support for configuring and reading the test bus and debug registers. This change also adds another vops in order to print the debug registers. Reviewed-by:
-
Yaniv Gardi authored
This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS a platform device. In order to do so a few additional changes are required: 1. The ufshcd-pltfrm is no longer serves as a platform device. Now it only serves as a group of platform APIs such as PM APIs (runtime suspend/resume, system suspend/resume etc), parsers of clocks, regulators and pm_levels from DT. 2. What used to be the old platform "probe" is now "only" a pltfrm_init() routine, that does exactly the same, but only being called by the new probe function of the UFS variant. Reviewed-by:
Rob Herring <robherring2@gmail.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
-
Yaniv Gardi authored
In order to simplify the code a set of wrapper functions is created to test and call each of the variant operations. Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
-
Yaniv Gardi authored
This patch adds ufshcd_get_variant() and ufshcd_set_variant() routines in order to get/set the variant specific data. Reviewed-by:
-
