Pull tty fixes from Greg KH:
 "Here are two tty driver fixes for 3.12-rc4.

  One fixes the reported regression in the n_tty code that a number of
  people found recently, and the other one fixes an issue with xen
  consoles that broke in 3.10"

* tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  xen/hvc: allow xenboot console to be used again
  tty: Fix pty master read() after slave closes

Pull staging fixes from Greg KH:
 "Here are 4 tiny staging and iio driver fixes for 3.12-rc4.  Nothing
  major, just some small fixes for reported issues"

* tag 'staging-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice
  iio:magnetometer: Bugfix magnetometer default output registers
  iio: Remove debugfs entries in iio_device_unregister()
  iio: amplifiers: ad8366: Remove regulator_put

Pull CIFS fixes from Steve French:
 "Small set of cifs fixes.  Most important is Jeff's fix that works
  around disconnection problems which can be caused by simultaneous use
  of user space tools (starting a long running smbclient backup then
  doing a cifs kernel mount) or multiple cifs mounts through a NAT, and
  Jim's fix to deal with reexport of cifs share.

  I expect to send two more cifs fixes next week (being tested now) -
  fixes to address an SMB2 unmount hang when server dies and a fix for
  cifs symlink handling of Windows "NFS" symlinks"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  [CIFS] update cifs.ko version
  [CIFS] Remove ext2 flags that have been moved to fs.h
  [CIFS] Provide sane values for nlink
  cifs: stop trying to use virtual circuits
  CIFS: FS-Cache: Uncache unread pages in cifs_readpages() before freeing them

Pull PCI fix from Bjorn Helgaas:
 "We merged what was intended to be an MMCONFIG cleanup, but in fact,
  for systems without _CBA (which is almost everything), it broke
  extended config space for domain 0 and it broke all config space for
  other domains.

  This reverts the change"

* tag 'pci-v3.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"

This reverts commit 07f9b61c.

07f9b61c was intended to be a cleanup that didn't change anything, but in
fact, for systems without _CBA (which is almost everything), it broke
extended config space for domain 0 and all config space for other domains.

Reference: http://lkml.kernel.org/r/20131004011806.GE20450@dangermouse.emea.sgi.comReported-by: Hedi Berriche <hedi@sgi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull ACPI and power management fixes from Rafael Wysocki:

 - The resume part of user space driven hibernation (s2disk) is now
   broken after the change that moved the creation of memory bitmaps to
   after the freezing of tasks, because I forgot that the resume utility
   loaded the image before freezing tasks and needed the bitmaps for
   that.  The fix adds special handling for that case.

 - One of recent commits changed the export of acpi_bus_get_device() to
   EXPORT_SYMBOL_GPL(), which was technically correct but broke existing
   binary modules using that function including one in particularly
   widespread use.  Change it back to EXPORT_SYMBOL().

 - The intel_pstate driver sometimes fails to disable turbo if its
   no_turbo sysfs attribute is set.  Fix from Srinivas Pandruvada.

 - One of recent cpufreq fixes forgot to update a check in cpufreq-cpu0
   which still (incorrectly) treats non-NULL as non-error.  Fix from
   Philipp Zabel.

 - The SPEAr cpufreq driver uses a wrong variable type in one place
   preventing it from catching errors returned by one of the functions
   called by it.  Fix from Sachin Kamat.

* tag 'pm+acpi-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: Use EXPORT_SYMBOL() for acpi_bus_get_device()
  intel_pstate: fix no_turbo
  cpufreq: cpufreq-cpu0: NULL is a valid regulator, part 2
  cpufreq: SPEAr: Fix incorrect variable type
  PM / hibernate: Fix user space driven resume regression

Pull xfs bugfixes from Ben Myers:
 "There are lockdep annotations for project quotas, a fix for dirent
  dtype support on v4 filesystems, a fix for a memory leak in recovery,
  and a fix for the build error that resulted from it.  D'oh"

* tag 'xfs-for-linus-v3.12-rc4' of git://oss.sgi.com/xfs/xfs:
  xfs: Use kmem_free() instead of free()
  xfs: fix memory leak in xlog_recover_add_to_trans
  xfs: dirent dtype presence is dependent on directory magic numbers
  xfs: lockdep needs to know about 3 dquot-deep nesting

Now avc_audit() has no more users with that parameter. Remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

.. so get rid of it.  The only indirect users were all the
avc_has_perm() callers which just expanded to have a zero flags
argument.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Every single user passes in '0'.  I think we had non-zero users back in
some stone age when selinux_inode_permission() was implemented in terms
of inode_has_perm(), but that complicated case got split up into a
totally separate code-path so that we could optimize the much simpler
special cases.

See commit 2e334057 ("SELinux: delay initialization of audit data in
selinux_inode_permission") for example.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a build failure caused by calling the free() function which
does not exist in the Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit aaaae980)

Free the memory in error path of xlog_recover_add_to_trans().
Normally this memory is freed in recovery pass2, but is leaked
in the error path.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit 519ccb81)

The determination of whether a directory entry contains a dtype
field originally was dependent on the filesystem having CRCs
enabled. This meant that the format for dtype beign enabled could be
determined by checking the directory block magic number rather than
doing a feature bit check. This was useful in that it meant that we
didn't need to pass a struct xfs_mount around to functions that
were already supplied with a directory block header.

Unfortunately, the introduction of dtype fields into the v4
structure via a feature bit meant this "use the directory block
magic number" method of discriminating the dirent entry sizes is
broken. Hence we need to convert the places that use magic number
checks to use feature bit checks so that they work correctly and not
by chance.

The current code works on v4 filesystems only because the dirent
size roundup covers the extra byte needed by the dtype field in the
places where this problem occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit 367993e7)

Michael Semon reported that xfs/299 generated this lockdep warning:

=============================================
[ INFO: possible recursive locking detected ]
3.12.0-rc2+ #2 Not tainted
---------------------------------------------
touch/21072 is trying to acquire lock:
 (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64

but task is already holding lock:
 (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&xfs_dquot_other_class);
  lock(&xfs_dquot_other_class);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

7 locks held by touch/21072:
 #0:  (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e
 #1:  (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40
 #2:  (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35
 #3:  (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1
 #4:  (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f
 #5:  (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64
 #6:  (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64

The lockdep annotation for dquot lock nesting only understands
locking for user and "other" dquots, not user, group and quota
dquots. Fix the annotations to match the locking heirarchy we now
have.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit f112a049)

Pull fuse bugfixes from Miklos Szeredi:
 "This contains two more fixes by Maxim for writeback/truncate races and
  fixes for RCU walk in fuse_dentry_revalidate()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: no RCU mode in fuse_access()
  fuse: readdirplus: fix RCU walk
  fuse: don't check_submounts_and_drop() in RCU walk
  fuse: fix fallocate vs. ftruncate race
  fuse: wait for writeback in fuse_file_fallocate()

Pull iommu fixes from Joerg Roedel:
 "A couple of fixes from the IOMMU side:

   - some small fixes for the new ARM-SMMU driver
   - a register offset correction for VT-d
   - add MAINTAINERS entry for drivers/iommu

  Overall no really big or intrusive changes"

* tag 'iommu-fixes-v3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  x86/iommu: correct ICS register offset
  MAINTAINERS: add overall IOMMU section
  iommu/arm-smmu: don't enable SMMU device until probing has completed
  iommu/arm-smmu: fix iommu_present() test in init
  iommu/arm-smmu: fix a signedness bug

Pull ARM64 fixes/updates from Catalin Marinas:
 - Bug-fixes (get_user/put_user, incorrect register width for ASID,
   FPSIMD initialisation)
 - Kconfig clean-up
 - defconfig update

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: Remove duplicate DEBUG_STACK_USAGE config
  arm64: include VIRTIO_{MMIO,BLK} in defconfig
  arm64: include EXT4 in defconfig
  arm64: fix possible invalid FPSIMD initialization state
  arm64: use correct register width when retrieving ASID
  arm64: avoid multiple evaluation of ptr in get_user/put_user()

Pull MIPS fixes from Ralf Baechle:
 "Two small fixes for 3.12 only this week.  I have a few more fixes
  pending but those are conceptually more complex so will have to wait
  for a bit longer"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches
  MIPS: Alchemy: MTX-1: fix incorrect placement of __initdata tag

Pull x86 fixes from Ingo Molnar:
 "Two simplefb fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/simplefb: Mark framebuffer mem-resources as IORESOURCE_BUSY to avoid bootup warning
  x86/simplefb: Fix overflow causing bogus fall-back

Pull irq fix from Ingo Molnar:
 "Frederic's minimal fix for hardirq/softirq nesting crashes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irq: Force hardirq exit's softirq processing on its own stack

Commit d0380e6c (early_printk:
consolidate random copies of identical code) added in 3.10 introduced
a check for con->index == -1 in early_console_register().

Initialize index to -1 for the xenboot console so earlyprintk=xen
works again.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `insn_bits` handler `ni_65xx_dio_insn_bits()` has a `for` loop that
currently writes (optionally) and reads back up to 5 "ports" consisting
of 8 channels each.  It reads up to 32 1-bit channels but can only read
and write a whole port at once - it needs to handle up to 5 ports as the
first channel it reads might not be aligned on a port boundary.  It
breaks out of the loop early if the next port it handles is beyond the
final port on the card.  It also breaks out early on the 5th port in the
loop if the first channel was aligned.  Unfortunately, it doesn't check
that the current port it is dealing with belongs to the comedi subdevice
the `insn_bits` handler is acting on.  That's a bug.

Redo the `for` loop to terminate after the final port belonging to the
subdevice, changing the loop variable in the process to simplify things
a bit.  The `for` loop could now try and handle more than 5 ports if the
subdevice has more than 40 channels, but the test `if (bitshift >= 32)`
ensures it will break out early after 4 or 5 ports (depending on whether
the first channel is aligned on a port boundary).  (`bitshift` will be
between -7 and 7 inclusive on the first iteration, increasing by 8 for
each subsequent operation.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.10.y 3.11.y 3.12.y
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull kvm NULL deref fix from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  Fix NULL dereference in gfn_to_hva_prot()

Pull ARC fix from Vineet Gupta:
 "Chrisitian found/fixed issue with SA_SIGINFO based signal handler
  corrupting the user space registers post after signal handling"

* 'for-curr' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: Fix signal frame management for SA_SIGINFO

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a few powerpc fixes, all aimed at -stable, found in part
  thanks to the ramping up of a major distro testing and in part thanks
  to the LE guys hitting all sort interesting corner cases.

  The most scary are probably the register clobber issues in
  csum_partial_copy_generic(), especially since Anton even had a test
  case for that thing, which didn't manage to hit the bugs :-)

  Another highlight is that memory hotplug should work again with these
  fixes.

  Oh and the vio modalias one is worse than the cset implies as it
  upsets distro installers, so I've been told at least, which is why I'm
  shooting it to stable"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/tm: Switch out userspace PPR and DSCR sooner
  powerpc/tm: Turn interrupts hard off in tm_reclaim()
  powerpc/perf: Fix handling of FAB events
  powerpc/vio: Fix modalias_show return values
  powerpc/iommu: Use GFP_KERNEL instead of GFP_ATOMIC in iommu_init_table()
  powerpc/sysfs: Disable writing to PURR in guest mode
  powerpc: Restore registers on error exit from csum_partial_copy_generic()
  powerpc: Fix parameter clobber in csum_partial_copy_generic()
  powerpc: Fix memory hotplug with sparse vmemmap

When we do a treclaim or trecheckpoint we end up running with userspace
PPR and DSCR values.  Currently we don't do anything special to avoid
running with user values which could cause a severe performance
degradation.

This patch moves the PPR and DSCR save and restore around treclaim and
trecheckpoint so that we run with user values for a much shorter period.
More care is taken with the PPR as it's impact is greater than the DSCR.

This is similar to user exceptions, where we run HTM_MEDIUM early to
ensure that we don't run with a userspace PPR values in the kernel.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We can't take IRQs in tm_reclaim as we might have a bogus r13 and r1.

This turns IRQs hard off in this function.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 4df48999 "Add power8 EBB support" included a bug in the handling
of the FAB_CRESP_MATCH and FAB_TYPE_MATCH fields.

These values are pulled out of the event code using EVENT_THR_CTL_SHIFT,
however we were then or'ing that value directly into MMCR1.

This meant we were failing to set the FAB fields correctly, and also
potentially corrupting the value for PMC4SEL. Leading to no counts for
the FAB events and incorrect counts for PMC4.

The fix is simply to shift left the FAB value correctly before or'ing it
with MMCR1.
Reported-by: Sooraj Ravindran Nair <soonair3@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

modalias_show() should return an empty string on error, not -ENODEV.

This causes the following false and annoying error:

> find /sys/devices -name modalias -print0 | xargs -0 cat >/dev/null
cat: /sys/devices/vio/4000/modalias: No such device
cat: /sys/devices/vio/4001/modalias: No such device
cat: /sys/devices/vio/4002/modalias: No such device
cat: /sys/devices/vio/4004/modalias: No such device
cat: /sys/devices/vio/modalias: No such device
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

Under heavy (DLPAR?) stress, we tripped this panic() in
arch/powerpc/kernel/iommu.c::iommu_init_table():

	page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
	if (!page)
		panic("iommu_init_table: Can't allocate %ld bytes\n", sz);

Before the panic() we got a page allocation failure for an order-2
allocation. There appears to be memory free, but perhaps not in the
ATOMIC context. I looked through all the call-sites of
iommu_init_table() and didn't see any obvious reason to need an ATOMIC
allocation. Most call-sites in fact have an explicit GFP_KERNEL
allocation shortly before the call to iommu_init_table(), indicating we
are not in an atomic context. There is some indirection for some paths,
but I didn't see any locks indicating that GFP_KERNEL is inappropriate.

With this change under the same conditions, we have not been able to
reproduce the panic.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

arch/powerpc/kernel/sysfs.c exports PURR with write permission.
This may be valid for kernel in phyp mode. But writing to
the file in guest mode causes crash due to a priviledge violation
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

The csum_partial_copy_generic() function saves the PowerPC non-volatile
r14, r15, and r16 registers for the main checksum-and-copy loop.
Unfortunately, it fails to restore them upon error exit from this loop,
which results in silent corruption of these registers in the presumably
rare event of an access exception within that loop.

This commit therefore restores these register on error exit from the loop.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The csum_partial_copy_generic() uses register r7 to adjust the remaining
bytes to process.  Unfortunately, r7 also holds a parameter, namely the
address of the flag to set in case of access exceptions while reading
the source buffer.  Lacking a quantum implementation of PowerPC, this
commit instead uses register r9 to do the adjusting, leaving r7's
pointer uncorrupted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Previous commit 46723bfa... introduced a new config option
HAVE_BOOTMEM_INFO_NODE that ended up breaking memory hot-remove for ppc
when sparse vmemmap is not defined.

This patch defines HAVE_BOOTMEM_INFO_NODE for ppc and adds the call to
register_page_bootmem_info_node. Without this we get a BUG_ON for memory
hot remove in put_page_bootmem().

This also adds a stub for register_page_bootmem_memmap to allow ppc to build
with sparse vmemmap defined. Leaving this as a stub is fine since the same
vmemmap addresses are also handled in vmemmap_populate and as such are
properly mapped.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.9+]

gfn_to_memslot() can return NULL or invalid slot. We need to check slot
validity before accessing it.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

IORESOURCE_BUSY is used to mark temporary driver mem-resources
instead of global regions. This suppresses warnings if regions
overlap with a region marked as BUSY.

This was always the case for VESA/VGA/EFI framebuffer regions so
do the same for simplefb regions. The reason we do this is to
allow device handover to real GPU drivers like
i915/radeon/nouveau which get the same regions via PCI BARs.

Maybe at some point we will be able to unregister platform
devices properly during the handover. In this case the simplefb
region would get removed before the new region is created.
However, this is currently not the case and would require rather
huge changes in remove_conflicting_framebuffers(). Add the BUSY
marker now and try to eventually rewrite the handover for a next release.

Also see kernel/resource.c for more information:

  /*
   * if a resource is "BUSY", it's not a hardware resource
   * but a driver mapping of such a resource; we don't want
   * to warn for those; some drivers legitimately map only
   * partial hardware resources. (example: vesafb)
   */

This suppresses warnings like:

  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 199 at arch/x86/mm/ioremap.c:171 __ioremap_caller+0x2e3/0x390()
  Info: mapping multiple BARs. Your kernel is fine.
  Call Trace:
    dump_stack+0x54/0x8d
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_fmt+0x4c/0x50
    iomem_map_sanity_check+0xac/0xe0
    __ioremap_caller+0x2e3/0x390
    ioremap_wc+0x32/0x40
    i915_driver_load+0x670/0xf50 [i915]
    ...
Reported-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1380724864-1757-1-git-send-email-dh.herrmann@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARM SoC fixes from Olof Johansson:
 "We have a fairly large batch of fixes this time around, mostly just
  due to various platforms all having a fix or two more than usual.

  Worth pointing out are:

   - A fix for EDMA on Davinci/OMAP where channel allocation broke with
     the DT conversion.  Due to some miscommunication we didn't
     understand the impact of the breakage, so we were pushing back on
     it for 3.12, but it sounds like it's actually breaking quite a few
     people out there.

   - A bunch of fixes for Marvell platforms, some straggling fixes for
     merge window fallout and some fixes for a couple of the platforms
     (Netgear RN102 in particular).

   - A fix for a race between multi-cluster power management and cpu
     hotplug on Versatile Express.

  And a bunch of other smaller fixes that all add up.

  We'll be switching over into stricter regressions-only mode from here
  on out"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  ARM: multi_v7_defconfig: add SDHCI for i.MX
  bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties
  ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102
  ARM: at91: sam9g45: shutdown ddr1 too when rebooting
  MAINTAINERS: ARM: SIRF: use kernel.org mail box
  MAINTAINERS: ARM: SIRF: add missed drivers into maintain list
  ARM: edma: Fix clearing of unused list for DT DMA resources
  ARM: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down
  ARM: dts: sirf: fix interrupt and dma prop of VIP for prima2 and atlas6
  ARM: dts: sirf: fix the ranges of peri-iobrg of prima2
  ARM: dts: makefile: build atlas6-evb.dtb for ARCH_ATLAS6
  ARM: dts: sirf: fix fifosize, clks, dma channels for UART
  ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver
  ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high
  ARM: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI
  ARM: shmobile: Remove #gpio-ranges-cells DT property
  gpio: rcar: Remove #gpio-range-cells DT property usage
  ARM: shmobile: armadillo: fixup ether pinctrl naming
  ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup
  ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format
  ...

Previously, when a signal was registered with SA_SIGINFO, parameters 2
and 3 of the signal handler were written to registers r1 and r2 before
the register set was saved. This led to corruption of these two
registers after returning from the signal handler (the wrong values were
restored).
With this patch, registers are now saved before any parameters are
passed, thus maintaining the processor state from before signal entry.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull sparc fixes from David Miller:
 "Couple of small bug fixes:

   1) strlcpy in ldom_reboot() is still not quite right, use sprintf
      instead from Kees Cook.

   2) Generic hugetlb interface pte checks should use the widest return
      type, otherwise high bits can get chopped off.

   3) Fix build with PCI MSI enabled on 32-bit sparc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fix MSI build failure on Sparc32
  sparc: remove deprecated IRQF_DISABLED
  mm: Fix generic hugetlb pte check return type.
  sparc: fix ldom_reboot buffer overflow harder

From Jason Cooper:
mvebu fixes for v3.12 (round 2)

 - mvebu
    - fix ReadyNAS 102 power button (needs to be active high)
    - fix ReadyNAS 102 automated rebooting (prevent hang) by add gpio-poweroff
      node
    - fix booting ReadyNAS 102 by adding MBus ranges and PCIe DT nodes
    - mvebu-mbus: prevent PCIe driver from continuing with corrupted resource

* tag 'fixes-3.12-2' of git://git.infradead.org/linux-mvebu:
  bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties
  ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102
  ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver
  ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high
Signed-off-by: Olof Johansson <olof@lixom.net>