Add a new topology IPC op to set up DAI links and set the link trigger
order to match the expectation based on the IPC type. Note that the
link_setup op implementations for IPC3 and IPC4 are not identical and
have contrasting trigger orders for playback and capture.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

IPC3 and IPC4 have different requirements for the order in which the FE
CPU and BE CPU DAI trigger callbacks must be invoked. With a regular PCM
start/stop, pipeline widgets are set up during hw_params and freed
during hw_free.

But when the system is suspended when a PCM is running,
pipeline widgets are freed during the SUSPEND trigger callback for the
FE CPU DAI. In order to avoid freeing the pipeline widgets before the BE
CPU DAI trigger is executed, the trigger order was modified in previous
contributions in the PCM dai_link_fixup callback to make sure that the BE
CPU DAI trigger stop/suspend is always invoked before the FE CPU DAI
trigger. But this contradicts the firmware requirement for IPC4 w.r.t.
ordering of pipeline triggers.

So, remove the freeing of pipeline widgets during FE CPU DAI suspend
trigger and handle it during system suspend when the
tear_down_all_pipelines() IPC op is invoked. This will be followed up
with a patch to fix the trigger order for IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When walking the list of the widgets from the source to the sink, we
accidentally also end up preparing/setting up the widgets that are not
in the list of connected DAPM widgets associated with the PCM. Avoid
this by checking if a widget is part of the connected DAPM widget list
during widget prepare, unprepare, setup or free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Calling the sof_widget_setup/free() for the DAI/AIF widgets inside the
snd_soc_dapm_widget_for_each_sink_path() loop will end up setting up or
freeing the widget multiple times if there are multiple paths leaving
the widget. Fix this by moving the widget setup/free for the starting
widget in each path outside the loop.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Export the widget_in_list() function to be used by other modules.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The FW currently ignores unbinding routes if the source and sink widgets
belong to the same pipeline. So no need to send the IPC at all in the
first place.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We know that "irq < 0", so delete the unnecessary check.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/Y9JHSwcfdNcfMjjt@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>:

Update va-macro driver dt-bindings and add missing properties in sc7280
machine driver dt-bindings.

Changes since v2:
    -- Update commit message and example in "Add platform property" patch.
    -- Update commit message in "Update clock name" patch.
Changes since v1:
    -- Remove sound-dai cells property patch.
    -- Update example in clock name change patch.
    -- Update commit message and add maxItems in platform proerty patch.

Srinivasa Rao Mandadapu (2):
  ASoC: qcom: dt-bindings: lpass-va-macro: Update clock name
  ASoC: dt-bindings: google,sc7280-herobrine: Add platform property

 .../devicetree/bindings/sound/google,sc7280-herobrine.yaml   | 12 ++++++++++++
 .../devicetree/bindings/sound/qcom,lpass-va-macro.yaml       |  4 ++--
 2 files changed, 14 insertions(+), 2 deletions(-)

--
2.7.4

Currently, we use the same channel mask for aggregated speakers.
It works fine for playback because we duplicate the audio data for all
aggregated speakers. But we need to get audio data from each aggregated
speaker and combine them to the captured audio. So we need to set
non-overlapping channel mask for aggregated ALH DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230125141317.30302-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The fallback compatible in a list (the last one) cannot be enum, because
it is always fixed.  Also if such fallback is used alone ("Generic"
case), it's not a list anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230126100722.9473-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The corresponding IPC4 module of snd_soc_dapm_buffer widget is module
-to-module copier.
The module-to-module copier is a buffer-like component with demuxing
capabilities.
Rename the host_token_list to common_copier_token_list since it will
be used by host copier and module-to-module copier.
The setup callback is almost the same as sof_ipc4_widget_setup_pcm except
the gtw_cfg data, and the free callback is exactly the same as
sof_ipc4_widget_free_comp_pcm. To reduce the duplication, the commit
reuses the setup and free callbacks.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230126110637.25542-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add platform property in sc7280 machine driver bindings for including
platform subnode in dai-links.
This is required for binding the frontend dai driver to do dynamic pcm
routing in ADSP based platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1674468802-14834-3-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update clock name from core to macro in lpass-va-macro node
to make it compatible with existing driver and existing DTS files.

Fixes: 67d99b23 ("ASoC: qcom: dt-bindings: add bindings for lpass va macro codec")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1674468802-14834-2-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix spelling in sound/soc/ Kconfig files:
s/upto/up to/
(reported by codespell)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Link: https://lore.kernel.org/r/20230124181746.19028-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Replace SNDRV_DMA_TYPE_DEV by SNDRV_DMA_TYPE_NONCOHERENT for pcm
buffer allocation. We measured about 18x performance improvement
when accessing the snd_pcm_mmap() buffer from userspace.

Eg: aarch64 with internal speaker
==
SNDRV_DMA_TYPE_DEV
    frames_per_second=66.4557M/s
    max_time_per_4096_frames=106.094u
    time_per_4096_frames=61.6351us

SNDRV_DMA_TYPE_NONCOHERENT
    frames_per_second=1028.58M/s
    max_time_per_4096_frames=20.312u
    time_per_4096_frames=3.98221us
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20221208084200.2136311-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

If all devices are the same or compatible, there is no single need to
keep growing of_device_id list with new entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230118101542.96705-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

All SDM845 sound cards are compatible with each other, so use one
generic fallback compatible for them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230118101542.96705-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

assigned-clock-parents and assigned-clocks are coming from dtschema, so
there is no need anymore to keep them in bindings.  Their presence were
also causing false positives:

  exynos5422-odroidxu3.dtb: i2s@3830000: Unevaluated properties are not allowed ('assigned-clock-rates' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120153020.320270-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The order of codec DAI phandles is reversed - first comes HDMI (always
present) and then codec (physically not present on Odroid XU4).

Fixes: 97709d36 ("ASoC: dt-bindings: Centralize the 'sound-dai' definition")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120153020.320270-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove unneeded includes from wsa881x and wsa883x drivers.  The drivers
do not reference anything from the headers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124163953.345949-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The struct sdw_port_config is not modified, so make it a const for code
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124163953.345949-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The struct sdw_slave_ops is not modified and sdw_driver takes pointer to
const, so make it a const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124163953.345949-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There is no need for the probe-component to be part of the PCM component
list as it does not make use of ASoC-topology and does not participate
in creating any PCM streams.

To achieve that, remove probe() and remove() functions.

Fixes: ed914a2a ("ASoC: Intel: avs: Data probing soc-component")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230123122144.1356890-1-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Check for SPF readiness in prm driver probe to avoid race conditions
during ADSP pil loading.
This patch is to avoid, sending requests to ADSP before it's
power domains are up and ready.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Ratna Deepthi Kudaravalli <rkudarav@qti.qualcomm.com>
Link: https://lore.kernel.org/r/1673508617-27410-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Mark AFE_DAC_CON0 as volatile since DSP firmware will access this
register too.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20230110092623.13035-1-chunxu.li@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

ux500_pcm_request_chan() is never called because the dma channels
are already set up from DT. Remove this, along with the
ux500_msp_dma_params structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230118161110.521504-4-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The platform data definition for ux500 sound devices was removed
six years ago after the DT conversion was completed, see commit
4b483ed0 ("ARM: ux500: cut some platform data").

Remove some leftover bits in the ASoC driver and just assume that
it always gets probed using DT.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230118161110.521504-3-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Trevor Wu <trevor.wu@mediatek.com>:

This series of patches adds support for Mediatek AFE of MT8188 SoC.
Patches are based on broonie tree "for-next" branch.

Changes since v4:
  - refine etdm dai driver based on reviewer's suggestions
  - refine dt-binding files based on reviewer's suggestions

Changes since v3:
  - replace apll_ck with apll to sync with the relationship in CCF
  - add mtk-soundcard-driver.c to support codec parsing
  - drop mclk-always-on-rates support in mt8188-dai-etdm.c
  - refine dt-binding files based on reviewer's suggestions

Changes since v2:
  - drop CLK_IGNORE_UNUSED flag
  - include bitfield.h to reslove the issue reported by kernel test robot
  - rename mt8188-afe-pcm.yaml to mt8188-afe.yaml
  - refine dt-binding files based on reviewer's suggestions

Changes since v1:
  - remove bus protection functions in case of unmerged dependency problem
  - replace some bit operation macro with FIELD_PREP
  - simplify register control by regmap_set_bits and regmap_clear_bits
  - fix dt-binding errors
  - rename compatible string for recognition

Trevor Wu (13):
  ASoC: mediatek: common: add SMC ops and SMC CMD
  ASoC: mediatek: mt8188: add common header
  ASoC: mediatek: mt8188: support audsys clock
  ASoC: mediatek: mt8188: support adda in platform driver
  ASoC: mediatek: mt8188: support etdm in platform driver
  ASoC: mediatek: mt8188: support pcmif in platform driver
  ASoC: mediatek: mt8188: support audio clock control
  ASoC: mediatek: mt8188: add platform driver
  ASoC: mediatek: mt8188: add control for timing select
  ASoC: dt-bindings: mediatek,mt8188-afe: add audio afe document
  ASoC: mediatek: common: add soundcard driver common code
  ASoC: mediatek: mt8188: add machine driver with mt6359
  ASoC: dt-bindings: mediatek,mt8188-mt6359: add mt8188-mt6359 document

 .../bindings/sound/mediatek,mt8188-afe.yaml   |  208 +
 .../sound/mediatek,mt8188-mt6359.yaml         |   97 +
 sound/soc/mediatek/Kconfig                    |   23 +
 sound/soc/mediatek/Makefile                   |    1 +
 sound/soc/mediatek/common/Makefile            |    2 +-
 sound/soc/mediatek/common/mtk-base-afe.h      |   19 +
 .../mediatek/common/mtk-soundcard-driver.c    |   79 +
 .../mediatek/common/mtk-soundcard-driver.h    |   14 +
 sound/soc/mediatek/mt8188/Makefile            |   15 +
 sound/soc/mediatek/mt8188/mt8188-afe-clk.c    |  658 ++++
 sound/soc/mediatek/mt8188/mt8188-afe-clk.h    |  115 +
 sound/soc/mediatek/mt8188/mt8188-afe-common.h |  151 +
 sound/soc/mediatek/mt8188/mt8188-afe-pcm.c    | 3359 +++++++++++++++++
 sound/soc/mediatek/mt8188/mt8188-audsys-clk.c |  205 +
 sound/soc/mediatek/mt8188/mt8188-audsys-clk.h |   15 +
 .../soc/mediatek/mt8188/mt8188-audsys-clkid.h |   83 +
 sound/soc/mediatek/mt8188/mt8188-dai-adda.c   |  632 ++++
 sound/soc/mediatek/mt8188/mt8188-dai-etdm.c   | 2588 +++++++++++++
 sound/soc/mediatek/mt8188/mt8188-dai-pcm.c    |  367 ++
 sound/soc/mediatek/mt8188/mt8188-mt6359.c     |  785 ++++
 sound/soc/mediatek/mt8188/mt8188-reg.h        | 3180 ++++++++++++++++
 21 files changed, 12595 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
 create mode 100644 sound/soc/mediatek/common/mtk-soundcard-driver.c
 create mode 100644 sound/soc/mediatek/common/mtk-soundcard-driver.h
 create mode 100644 sound/soc/mediatek/mt8188/Makefile
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-clk.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-clk.h
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-common.h
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-pcm.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clk.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clk.h
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clkid.h
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-adda.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-etdm.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-pcm.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-mt6359.c
 create mode 100644 sound/soc/mediatek/mt8188/mt8188-reg.h

--
2.18.0

Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:

This patch series adds compress API support to ipc_msg_data /
set_stream_data_offset callbacks.

Changes since v1:
	- fixed reviewed-by list (+Peter, -Pierre). Since github had
	  some glitches I added the reviews received manually in the
          commits.
	- Github PR link: https://github.com/thesofproject/linux/pull/4133

Daniel Baluta (4):
  ASoC: SOF: Prepare ipc_msg_data to be used with compress API
  ASoC: SOF: Prepare set_stream_data_offset for compress API
  ASoC: SOF: Add support for compress API for stream data/offset
  ASoC: SOF: compress: Set compress data offset

 sound/soc/sof/amd/acp-ipc.c            |  8 ++--
 sound/soc/sof/amd/acp.h                |  5 ++-
 sound/soc/sof/compress.c               |  9 +++++
 sound/soc/sof/intel/hda-ipc.c          |  8 ++--
 sound/soc/sof/intel/hda.h              |  4 +-
 sound/soc/sof/ipc3-pcm.c               |  3 +-
 sound/soc/sof/ipc3.c                   |  4 +-
 sound/soc/sof/mediatek/mt8186/mt8186.c |  2 +-
 sound/soc/sof/mediatek/mt8195/mt8195.c |  2 +-
 sound/soc/sof/ops.h                    |  8 ++--
 sound/soc/sof/sof-priv.h               | 11 ++++--
 sound/soc/sof/stream-ipc.c             | 53 +++++++++++++++++++-------
 12 files changed, 81 insertions(+), 36 deletions(-)

--
2.25.1

To resolve a conflict and support further development.

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

This series contains one fix (first patch) followed by a nice to have safety
belts in case we get a widget from topology which is not handled by SOF and will
not have corresponding swidget associated with.

Merge series from Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>:

This patch series enables audio support on FSD SoC.

Changes in v4:
1. Rebased and addressed review comments provided for v3.

Changes in v3:
1. Addressed all the review comments provided for v2 patch.
2. Fixed compilation warnings reported by kernel test robot.

Changes in v2:
1. New compatible added in Exynos I2S driver for FSD platform.
2. Added Fixup support for Exynos I2S CPU DAI.
3. Migration of manual PSR, OPCLK configuration to Exynos CPU DAI driver as
fixup.
4. Migrated from dedicated sound card to simple audio card.
5. Support added for tlv320aic3x-i2c codec on FSD platform.

Changes in v1:
1. Add TDM support on samsung I2S interface.
2. Allow sound card to directly configure I2S prescaler divider instead of
calculating it from frame clock.
3. The sound card support for FSD SoC which utilizes samsung I2S interface
as CPU DAI.

Padmanabhan Rajanbabu (5):
  ASoC: dt-bindings: Add FSD I2S controller bindings
  ASoC: samsung: i2s: add support for FSD I2S
  arm64: dts: fsd: Add I2S DAI node for Tesla FSD
  arm64: dts: fsd: Add codec node for Tesla FSD
  arm64: dts: fsd: Add sound card node for Tesla FSD

 .../bindings/sound/samsung-i2s.yaml           |  8 +++
 arch/arm64/boot/dts/tesla/fsd-evb.dts         | 53 +++++++++++++++++++
 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi    | 14 +++++
 arch/arm64/boot/dts/tesla/fsd.dtsi            | 34 ++++++++++++
 sound/soc/samsung/i2s-regs.h                  |  1 +
 sound/soc/samsung/i2s.c                       | 53 +++++++++++++++++++
 6 files changed, 163 insertions(+)

--
2.17.1

The simple card driver already has support for a simple-audio-card,plat
property but its not reflected in the documentation. Add documentation
for this plat property.
Signed-off-by: Faiz Abbas <faiz.abbas@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230117061808.18422-1-faiz.abbas@arm.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code return when a widget doesn't need to
prepare/unprepare. This will prevent widgets in the sink path from being
prepared/unprepared.

Cc: <stable@vger.kernel.org> # 6.1
Link: https://github.com/thesofproject/linux/issues/4021Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Skip preparing/unpreparing widgets if the swidget pointer is NULL. This
will be true in the case of virtual widgets in topology that were added
for reusing the legacy HDA machine driver with SOF.

Fixes: 9862dcf7 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We should unprepare the widget if its use_count = 1.

Fixes: 9862dcf7 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If there is a connection between a playback stream and a capture stream,
all widgets that are connected to the playback stream and the capture
stream will be in the list.
So, we have to start with the exactly right widget type.
snd_soc_dapm_aif_out is for capture stream and a playback stream should
start with a snd_soc_dapm_aif_in widget.
Contrarily, snd_soc_dapm_dai_in is for playback stream, and a capture
stream should start with a snd_soc_dapm_dai_out widget.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230117123534.2075-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because now snd_sof_set_stream_data_offset has compress
support we use it to set posn_offset for compress stream.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-5-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_sof_pcm_stream keeps information about both PCM (snd_pcm_substream)
and Compress (snd_compr_stream) streams.

When PCM substream pointer is NULL this means we are dealing with a
compress stream.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-4-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Make second parameter of set_stream_data_offset generic
in order to be used for both PCM and compress streams.

Current patch doesn't introduce any functional change,
just prepare the code for compress support.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-3-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>