- 03 May, 2017 40 commits
-
-
Yan, Zheng authored
commit 8179a101 upstream. ceph_set_acl() calls __ceph_setattr() if the setacl operation needs to modify inode's i_mode. __ceph_setattr() updates inode's i_mode, then calls posix_acl_chmod(). The problem is that __ceph_setattr() calls posix_acl_chmod() before sending the setattr request. The get_acl() call in posix_acl_chmod() can trigger a getxattr request. The reply of the getxattr request can restore inode's i_mode to its old value. The set_acl() call in posix_acl_chmod() sees old value of inode's i_mode, so it calls __ceph_setattr() again. Link: http://tracker.ceph.com/issues/19688Reported-by:
Jerry Lee <leisurelysw24@gmail.com> Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Tested-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit 13bf9fbf upstream. The NFSv2/v3 code does not systematically check whether we decode past the end of the buffer. This generally appears to be harmless, but there are a few places where we do arithmetic on the pointers involved and don't account for the possibility that a length could be negative. Add checks to catch these. Reported-by:
Tuomas Haanpää <thaan@synopsys.com> Reported-by:
Ari Kauppi <ari@synopsys.com> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit db44bac4 upstream. Use a couple shortcuts that will simplify a following bugfix. Signed-off-by:
-
J. Bruce Fields authored
commit e6838a29 upstream. A client can append random data to the end of an NFSv2 or NFSv3 RPC call without our complaining; we'll just stop parsing at the end of the expected data and ignore the rest. Encoded arguments and replies are stored together in an array of pages, and if a call is too large it could leave inadequate space for the reply. This is normally OK because NFS RPC's typically have either short arguments and long replies (like READ) or long arguments and short replies (like WRITE). But a client that sends an incorrectly long reply can violate those assumptions. This was observed to cause crashes. Also, several operations increment rq_next_page in the decode routine before checking the argument size, which can leave rq_next_page pointing well past the end of the page array, causing trouble later in svc_free_pages. So, following a suggestion from Neil Brown, add a central check to enforce our expectation that no NFSv2/v3 call has both a large call and a large reply. As followup we may also want to rewrite the encoding routines to check more carefully that they aren't running off the end of the page array. We may also consider rejecting calls that have any extra garbage appended. That would be safer, and within our rights by spec, but given the age of our server and the NFS protocol, and the fact that we've never enforced this before, we may need to balance that against the possibility of breaking some oddball client. Reported-by:
-
Dmitry Torokhov authored
commit 7c5bb4ac upstream. Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by:
Paweł Bylica <chfast@gmail.com> Tested-by:
Ed Bordin <edbordin@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 6e4cac23 upstream. The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Al Viro authored
commit 71d6ad08 upstream. Don't assume that server is sane and won't return more data than asked for. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Cowgill authored
commit c46f59e9 upstream. arch_check_elf contains a usage of current_cpu_data that will call smp_processor_id() with preemption enabled and therefore triggers a "BUG: using smp_processor_id() in preemptible" warning when an fpxx executable is loaded. As a follow-up to commit b244614a ("MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by using raw_current_cpu_data instead. The rationale quoted from the previous commit: "It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning." Fixes: 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") Signed-off-by:
James Cowgill <James.Cowgill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15951/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Hogan authored
commit 9d7f29cd upstream. calculate_min_delta() may incorrectly access a 4th element of buf2[] which only has 3 elements. This may trigger undefined behaviour and has been reported to cause strange crashes in start_kernel() sometime after timer initialization when built with GCC 5.3, possibly due to register/stack corruption: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns CPU 0 Unable to handle kernel paging request at virtual address ffffb0aa, epc == 8067daa8, ra == 8067da84 Oops[#1]: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #51 task: 8065e3e0 task.stack: 80644000 $ 0 : 00000000 00000001 00000000 00000000 $ 4 : 8065b4d0 00000000 805d0000 00000010 $ 8 : 00000010 80321400 fffff000 812de408 $12 : 00000000 00000000 00000000 ffffffff $16 : 00000002 ffffffff 80660000 806a666c $20 : 806c0000 00000000 00000000 00000000 $24 : 00000000 00000010 $28 : 80644000 80645ed0 00000000 8067da84 Hi : 00000000 Lo : 00000000 epc : 8067daa8 start_kernel+0x33c/0x500 ra : 8067da84 start_kernel+0x318/0x500 Status: 11000402 KERNEL EXL Cause : 4080040c (ExcCode 03) BadVA : ffffb0aa PrId : 0501992c (MIPS 1004Kc) Modules linked in: Process swapper/0 (pid: 0, threadinfo=80644000, task=8065e3e0, tls=00000000) Call Trace: [<8067daa8>] start_kernel+0x33c/0x500 Code: 24050240 0c0131f9 24849c64 <a200b0a8> 41606020 000000c0 0c1a45e6 00000000 0c1a5f44 UBSAN also detects the same issue: ================================================================ UBSAN: Undefined behaviour in arch/mips/kernel/cevt-r4k.c:85:41 load of address 80647e4c with insufficient space for an object of type 'unsigned int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #47 Call Trace: [<80028f70>] show_stack+0x88/0xa4 [<80312654>] dump_stack+0x84/0xc0 [<8034163c>] ubsan_epilogue+0x14/0x50 [<803417d8>] __ubsan_handle_type_mismatch+0x160/0x168 [<8002dab0>] r4k_clockevent_init+0x544/0x764 [<80684d34>] time_init+0x18/0x90 [<8067fa5c>] start_kernel+0x2f0/0x500 ================================================================= buf2[] is intentionally only 3 elements so that the last element is the median once 5 samples have been inserted, so explicitly prevent the possibility of comparing against the 4th element rather than extending the array. Fixes: 1fa40555 ("MIPS: cevt-r4k: Dynamically calculate min_delta_ns") Reported-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Tested-by:
-
James Hogan authored
commit 162b270c upstream. KGDB is a kernel debug stub and it can't be used to debug userland as it can only safely access kernel memory. On MIPS however KGDB has always got the register state of sleeping processes from the userland register context at the beginning of the kernel stack. This is meaningless for kernel threads (which never enter userland), and for user threads it prevents the user seeing what it is doing while in the kernel: (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () 2 Thread 1 (init) 0x000000007705c4b4 in ?? () 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Get the register state instead from the (partial) kernel register context stored in the task's thread_struct for resume() to restore. All threads now correctly appear to be in context_switch(): (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Call clobbered registers which aren't saved and exception registers (BadVAddr & Cause) which can't be easily determined without stack unwinding are reported as 0. The PC is taken from the return address, such that the state presented matches that found immediately after returning from resume(). Fixes: 88547001 ("[MIPS] kgdb: add arch support for the kernel's kgdb core") Signed-off-by:
-
Noam Camus authored
commit 6492f09e upstream. Make ATOMIC_INIT available for all ARC platforms (including plat-eznps) Signed-off-by:
Noam Camus <noamca@mellanox.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Johannes Thumshirn authored
commit e7661a8e upstream. When instrumenting the SCSI layer to run into the !blk_rq_nr_phys_segments(rq) case the following warning emitted from the block layer: blk_peek_request: bad return=-22 This happens because since commit fd3fc0b4 ("scsi: don't BUG_ON() empty DMA transfers") we return the wrong error value from scsi_prep_fn() back to the block layer. [mkp: silenced checkpatch] Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Fixes: fd3fc0b4 scsi: don't BUG_ON() empty DMA transfers Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Takashi Iwai authored
commit 4e7655fd upstream. The snd_use_lock_sync() (thus its implementation snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of the sync loop. It was introduced from the beginning, just to be "safer", in terms of avoiding the stupid bugs. However, as Ben Hutchings suggested, this timeout rather introduces a potential leak or use-after-free that was apparently fixed by the commit 2d7d5400 ("ALSA: seq: Fix race during FIFO resize"): for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() -> copy_from_user() could block for a long time, and snd_use_lock_sync() goes timeout and still leaves the cell at releasing the pool. For fixing such a problem, we remove the break by the timeout while still keeping the warning. Suggested-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Takashi Sakamoto authored
commit dfb00a56 upstream. An abstraction of asynchronous transaction for transmission of MIDI messages was introduced in Linux v4.4. Each driver can utilize this abstraction to transfer MIDI messages via fixed-length payload of transaction to a certain unit address. Filling payload of the transaction is done by callback. In this callback, each driver can return negative error code, however current implementation assigns the return value to unsigned variable. This commit changes type of the variable to fix the bug. Reported-by:
Julia Lawall <Julia.Lawall@lip6.fr> Fixes: 585d7cba ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit 3d016d57 upstream. At a commit 6c29230e ("ALSA: oxfw: delayed registration of sound card"), ALSA oxfw driver fails to handle SCS.1m/1d, due to -EBUSY at a call of snd_card_register(). The cause is that the driver manages to register two rawmidi instances with the same device number 0. This is a regression introduced since kernel 4.7. This commit fixes the regression, by fixing up device property after discovering stream formats. Fixes: 6c29230e ("ALSA: oxfw: delayed registration of sound card") Signed-off-by:
-
Jamie Bainbridge authored
[ Upstream commit 105f5528 ] In situations where an skb is paged, the transport header pointer and tail pointer can be the same because the skb contents are in frags. This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a length of 0 when the length to receive is actually greater than zero. skb->len is already correctly set in ip6_input_finish() with pskb_pull(), so use skb->len as it always returns the correct result for both linear and paged data. Signed-off-by:
Jamie Bainbridge <jbainbri@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wei Wang authored
[ Upstream commit c1201444 ] Always zero out ca_priv data in tcp_assign_congestion_control() so that ca_priv data is cleared out during socket creation. Also always zero out ca_priv data in tcp_reinit_congestion_control() so that when cc algorithm is changed, ca_priv data is cleared out as well. We should still zero out ca_priv data even in TCP_CLOSE state because user could call connect() on AF_UNSPEC to disconnect the socket and leave it in TCP_CLOSE state and later call setsockopt() to switch cc algorithm on this socket. Fixes: 2b0a8c9e ("tcp: add CDG congestion control") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 199ab00f ] Andrey reported a out-of-bound access in ip6_tnl_xmit(), this is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4 neigh key as an IPv6 address: neigh = dst_neigh_lookup(skb_dst(skb), &ipv6_hdr(skb)->daddr); if (!neigh) goto tx_err_link_failure; addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE addr_type = ipv6_addr_type(addr6); if (addr_type == IPV6_ADDR_ANY) addr6 = &ipv6_hdr(skb)->daddr; memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr)); Also the network header of the skb at this point should be still IPv4 for 4in6 tunnels, we shold not just use it as IPv6 header. This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it is, we are safe to do the nexthop lookup using skb_dst() and ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which dest address we can pick here, we have to rely on callers to fill it from tunnel config, so just fall to ip6_route_output() to make the decision. Fixes: ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Alexander Kochetkov authored
[ Upstream commit f555f34f ] The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5 ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by:
Roger Quadros <rogerq@ti.com> Tested-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 8048ced9 ] Taking down the loopback device wreaks havoc on IPv6 routing. By extension, taking down a VRF device wreaks havoc on its table. Dmitry and Andrey both reported heap out-of-bounds reports in the IPv6 FIB code while running syzkaller fuzzer. The root cause is a dead dst that is on the garbage list gets reinserted into the IPv6 FIB. While on the gc (or perhaps when it gets added to the gc list) the dst->next is set to an IPv4 dst. A subsequent walk of the ipv6 tables causes the out-of-bounds access. Andrey's reproducer was the key to getting to the bottom of this. With IPv6, host routes for an address have the dst->dev set to the loopback device. When the 'lo' device is taken down, rt6_ifdown initiates a walk of the fib evicting routes with the 'lo' device which means all host routes are removed. That process moves the dst which is attached to an inet6_ifaddr to the gc list and marks it as dead. The recent change to keep global IPv6 addresses added a new function, fixup_permanent_addr, that is called on admin up. That function restarts dad for an inet6_ifaddr and when it completes the host route attached to it is inserted into the fib. Since the route was marked dead and moved to the gc list, re-inserting the route causes the reported out-of-bounds accesses. If the device with the address is taken down or the address is removed, the WARN_ON in fib6_del is triggered. All of those faults are fixed by regenerating the host route if the existing one has been moved to the gc list, something that can be determined by checking if the rt6i_ref counter is 0. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
Herbert Xu authored
[ Upstream commit f6478218 ] When a parent macvlan device is destroyed we end up purging its broadcast queue without dropping the device reference count on the packet source device. This causes the source device to linger. This patch drops that reference count. Fixes: 260916df ("macvlan: Fix potential use-after free for...") Reported-by:
Joe Ghalam <Joe.Ghalam@dell.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 4ef1b286 ] SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled while packets are collected on the error queue. So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags is not enough to safely assume that the skb contains OPT_STATS data. Add a bit in sock_exterr_skb to indicate whether the skb contains opt_stats data. Fixes: 1c885808 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by:
JongHwan Kim <zzoru007@gmail.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 8605330a ] __sock_recv_timestamp can be called for both normal skbs (for receive timestamps) and for skbs on the error queue (for transmit timestamps). Commit 1c885808 (tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING) assumes any skb passed to __sock_recv_timestamp are from the error queue, containing OPT_STATS in the content of the skb. This results in accessing invalid memory or generating junk data. To fix this, set skb->pkt_type to PACKET_OUTGOING for packets on the error queue. This is safe because on the receive path on local sockets skb->pkt_type is never set to PACKET_OUTGOING. With that, copy OPT_STATS from a packet, only if its pkt_type is PACKET_OUTGOING. Fixes: 1c885808 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by:
-
Ilan Tayari authored
[ Upstream commit 5e82c9e4 ] Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size of the table, regardless of the amount of entries in it. Existing code does not do that, and this breaks all usage of ethtool -N or -n without explicit location, with this error: rmgr: Invalid RX class rules table size: Success Set info->data to the table size. Tested: ethtool -n ens8 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55 ethtool -n ens8 ethtool -N ens8 delete 1023 ethtool -N ens8 delete 55 Fixes: f913a72a ("net/mlx5e: Add support to get ethtool flow rules") Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit cbad8cdd ] RX packet headers are meant to be contained in SKB linear part, and chose a threshold of 128. It turns out this is not enough, i.e. for IPv6 packet over VxLAN. In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes, and 86 bytes for TCP/IPv6. In total 136 bytes that is more than current 128 bytes. In this case expand header flow is reached. The warning in skb_try_coalesce() caused by a wrong truesize was already fixed here: commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()"). Still, we prefer to totally avoid the expand header flow for performance reasons. Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found. Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit c415f704 ] On ConnectX5 the wqe inline mode is "none" and hence the FW reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED. Fix our devlink callbacks to deal with that on get and set. Also fix the tc flow parsing code not to fail anything when inline isn't required. Fixes: bffaa916 ('net/mlx5: E-Switch, Add control for inline mode') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Mohamad Haj Yahia authored
[ Upstream commit 55378a23 ] If FW is stuck in initializing state we will skip the driver load, but current error handling flow doesn't clean previously allocated command interface resources. Fixes: e3297246 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 723b929c ] Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
-
Tushar Dave authored
[ Upstream commit c70b17b7 ] Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 557c44be ] Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Reported-by:
-
Ilan Tayari authored
[ Upstream commit 43170c4e ] Commit 07b26c94 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c94 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit ec9c4215 ] Commit a149e7c7 ("ipv6: sr: add support for SRH injection through setsockopt") introduced handling of IPV6_SRCRT_TYPE_4, but at the same time restricted it to only IPV6_SRCRT_TYPE_0 and IPV6_SRCRT_TYPE_4. Previously, ipv6_push_exthdr() and fl6_update_dst() would also handle other values (ie STRICT and TYPE_2). Restore previous source routing behavior, by handling IPV6_SRCRT_STRICT and IPV6_SRCRT_TYPE_2 the same way as IPV6_SRCRT_TYPE_0 in ipv6_push_exthdr() and fl6_update_dst(). Fixes: a149e7c7 ("ipv6: sr: add support for SRH injection through setsockopt") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David Lebrun authored
[ Upstream commit 95b9b88d ] The icmpv6_param_prob() function already does a kfree_skb(), this patch removes the duplicate one. Fixes: 1ababeba ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Lebrun <david.lebrun@uclouvain.be> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9d386cd9 ] This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258 ("dp83640: Delay scheduled work.") Signed-off-by:
Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by:
-
David Lebrun authored
[ Upstream commit 2f3bb642 ] This patch fixes an out-of-bounds access in seg6_validate_srh() when the trailing data is less than sizeof(struct sr6_tlv). Reported-by:
-
Sergei Shtylyov authored
[ Upstream commit 1debdc8f ] The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea ("ravb: unmap descriptors when freeing rings"). Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 426c87ca ] Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr. Fixes: 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 1862d620 ] Syzkaller reported a use-after-free in ip_recv_error at line info->ipi_ifindex = skb->dev->ifindex; This function is called on dequeue from the error queue, at which point the device pointer may no longer be valid. Save ifindex on enqueue in __skb_complete_tx_timestamp, when the pointer is valid or NULL. Store it in temporary storage skb->cb. It is safe to reference skb->dev here, as called from device drivers or dev_queue_xmit. The exception is when called from tcp_ack_tstamp; in that case it is NULL and ifindex is set to 0 (invalid). Do not return a pktinfo cmsg if ifindex is 0. This maintains the current behavior of not returning a cmsg if skb->dev was NULL. On dequeue, the ipv4 path will cast from sock_exterr_skb to in_pktinfo. Both have ifindex as their first element, so no explicit conversion is needed. This is by design, introduced in commit 0b922b7a ("net: original ingress device index in PKTINFO"). For ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo. Fixes: 829ae9d6 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp") Reported-by:
-
Rabin Vincent authored
[ Upstream commit a2d6cbb0 ] addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 17c3060b ] In the (very unlikely) case a passive socket becomes a listener, we do not want to duplicate its saved SYN headers. This would lead to double frees, use after free, and please hackers and various fuzzers Tested: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 connect(4, AF_UNSPEC, ...) = 0 +0 close(3) = 0 +0 bind(4, ..., ...) = 0 +0 listen(4, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 Fixes: cd8ae852 ("tcp: provide SYN headers for passive connections") Signed-off-by:
-
