- 09 Oct, 2023 6 commits
-
-
Koby Elbaz authored
hl_device_status() returns the status of an acquired device. If a device is going down (following an rmmod cmd), it should be marked as an unusable/malfunctioning device, and hence should not be acquired. However, since this was not the case so far (i.e., a device going down would inaccurately return 'in reset' status allowing the user to acquire the device) it introduced a bug where as part of a reset flow, the driver could not kill processes that have not run yet, and since those processes aren't blocked from reacquiring a device, we get eventually a new flow of a driver attempting to kill all processes in a list that can't be ever really empty. Signed-off-by:
Koby Elbaz <kelbaz@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Tomer Tayar authored
It is useful for debug to know which user process have acquired the device. Add this info to the relevant debug print, in addition to the already printed user context's ASID. Signed-off-by:
Tomer Tayar <ttayar@habana.ai> Reviewed-by:
-
Tomer Tayar authored
When an ioctl fails, it is useful to know what is the task command name and the full ioctl request code, in addition to the task pid and the ioctl number. Add the additional information to the relevant debug error prints. Signed-off-by:
-
Ofir Bitton authored
In order for user to be aware of undefined opcode events, we must store all relevant information and notify user about the failure. The user will fetch the stored info via info ioctl. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Tomer Tayar authored
If hl_device_cond_reset() is called while a reset is already pending but hasn't started, the reset request will be dropped. If the flags of the new request are more severe, e.g. a hard reset while the pending reset is a compute reset, the eventual reset won't be suitable for the device status. To prevent such cases, update the pending reset flags with the new requests flags before the requests are dropped. Signed-off-by:
-
Tomer Tayar authored
When a H/W event is received while a user is registered to events, no immediate hard reset will happen, and instead the user will be notified and will have some time to handle it and eventually release the device, after which the reset will be done. If a user, as part of the handling and as part of the cleanup steps towards releasing the device, unregisters from receiving those events, and at that time an adjacent H/W event is received, it will be assumed that the user is not registered to events and thus an immediate hard reset is required. To prevent such an unwanted immediate reset, modify the driver to perform it if the user is not registered to events AND we don't already have a pending reset for a previous H/W event. Signed-off-by:
-
- 04 Oct, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull for v6.7: Features and functionality: - Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo, Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi) - Plenty of various DSC improvements and fixes (Ankit) - Add DSC PPS state readout and verification (Suraj) - Improve fastsets for VRR, LRR and M/N updates (Ville) - Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville) - Various DSB improvements, load LUTs using DSB (Ville) - Improve shared link bandwidth management, starting with FDI (Imre) - Optimize get param ioctl for PXP status (Alan) - Remove DG2 pre-production hardware workarounds (Matt) - Add more RPL P/U PCI IDs (Dnyaneshwar) - Add new DG2-G12 stepping (Swati) - Add PSR sink error status to debugfs (Jouni) - Add DP enhanced framing to crtc state checker (Ville) Refactoring and cleanups: - Simplify TileY/Tile4 tiling selftest enumeration (Matt) - Remove some unused power domain code (Gustavo) - Check stepping of display IP version rather than MTL platform (Matt) - DP audio compute config cleanups (Vinod) - SDVO cleanups and refactoring, more robust failure handling (Ville) - Color register definition and readout cleanups (Jani) - Reduce header interdependencies for frontbuffer tracking (Jani) - Continue replacing struct edid with struct drm_edid (Jani) - Use source physical address instead of EDID for CEC (Jani) - Clean up Type-C port lane count functions (Luca) - Clean up DSC PPS register definitions and readout (Jani) - Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani) - Move more of the display probe to display code (Jani) - Remove redundant runtime suspended state flag (Jouni) - Move display info printing to display code (Balasubramani) - Frontbuffer tracking improvements (Jouni) - Add trailing newlines to debug logging (Jim Cromie) - Separate display workarounds from clock gating init (Matt) - Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre) Fixes: - Fix hotplug poll detect loops via suspend/resume (Imre) - Fix hotplug detect for forced connectors (Imre) - Fix DSC first_line_bpg_offset calculation (Suraj) - Fix debug prints for SDP CRC16 (Arun) - Fix PXP runtime resume (Alan) - Fix cx0 PHY lane handling (Gustavo) - Fix frontbuffer tracking locking in debugfs (Juha-Pekka) - Fix SDVO detect on some models (Ville) - Fix SDP split configuration for DP MST (Vinod) - Fix AUX usage and reads for HDCP on DP MST (Suraj) - Fix PSR workaround (Jouni) - Fix redundant AUX power get/put in DP force (Imre) - Fix ICL DSI TCLK POST by letting hardware handle it (William) - Fix IRQ reset for XE LP+ (Gustavo) - Fix h/vsync_end instead of h/vtotal in VBT (Ville) - Fix C20 PHY msgbus timeout issues (Gustavo) - Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville) - Fix FEC state readout for DP MST (Ville) DRM subsystem core changes: - Assume sink supports 8 bpc when DSC is supported (Ankit) - Add drm_edid_is_digital() helper (Jani) - Parse source physical address from EDID (Jani) - Add function to attach CEC without EDID (Jani) - Reorder connector sysfs/debugfs remove (Ville) - Register connector sysfs ddc symlink later (Ville) Media subsystem changes: - Add comments about CEC source physical address usage (Jani) Merges: - Backmerge drm-next to get v6.6-rc1 (Jani) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/i915_drv.h From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com
-
- 02 Oct, 2023 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: Fixes/improvements/new stuff: - Fix TLB-Invalidation seqno store [mtl] (Alan Previn) - Force a reset on internal GuC error [guc] (John Harrison) - Define GSC fw [gsc] (Daniele Ceraolo Spurio) - Update workaround 14016712196 [dg2/mtl] (Tejas Upadhyay) - Mark requests for GuC virtual engines to avoid use-after-free (Andrzej Hajda) - Add Wa_14015150844 [dg2/mtl] (Shekhar Chauhan) - Prevent error pointer dereference (Dan Carpenter) - Add Wa_18022495364 [tgl,adl,rpl] (Dnyaneshwar Bhadane) - Fix GuC PMU by moving execlist stats initialization to execlist specific setup (Umesh Nerlige Ramappa) - Fix PXP firmware load [pxp/mtl] (Alan Previn) - Fix execution/context state of PXP contexts (Alan Previn) - Limit the length of an sg list to the requested length (Matthew Wilcox) - Fix reservation address in ggtt_reserve_guc_top [guc] (Javier Pello) - Add Wa_18028616096 [dg2] (Shekhar Chauhan) - Get runtime pm in busyness worker only if already active [guc/pmu] (Umesh Nerlige Ramappa) - Don't set PIPE_CONTROL_FLUSH_L3 for aux inval (Nirmoy Das) Future platform enablement: - Fix and consolidate some workaround checks, make others IP version based [mtl] (Matt Roper) - Replace Meteorlake subplatforms with IP version checks (Matt Roper) - Adding DeviceID for Arrowlake-S under MTL [mtl] (Nemesa Garg) - Run relevant bits of debugfs drop_caches per GT (Tvrtko Ursulin) Miscellaneous: - Remove Wa_15010599737 [dg2] (Shekhar Chauhan) - Align igt_spinner_create_request with hangcheck [selftests] (Jonathan Cavitt) - Remove pre-production workarounds [dg2] (Matt Roper) - Tidy some workaround definitions (Matt Roper) - Wait longer for tasks in migrate selftest [gt] (Jonathan Cavitt) - Skip WA verification for GEN7_MISCCPCTL on DG2 [gt] (Andrzej Hajda) - Silence injected failure in the load via GSC path [huc] (Daniele Ceraolo Spurio) - Refactor deprecated strncpy (Justin Stitt) - Update RC6 mask for mtl_drpc [debugfs/mtl] (Badal Nilawar) - Remove a static inline that requires including i915_drv.h [gt] (Jani Nikula) - Remove inlines from i915_gem_execbuffer.c [gem] (Jani Nikula) - Remove gtt_offset from stream->oa_buffer.head/.tail [perf] (Ashutosh Dixit) - Do not disable preemption for resets (Tvrtko Ursulin) Signed-off-by:
-
- 29 Sep, 2023 2 commits
-
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Jouni Högander authored
i915_gem_object_set_frontbuffer returns set frontbuffer pointer. When we are releasing frontbuffer we are clearing the pointer from the object. Warn on if return value is not null. v3: Check i915_gem_object_set_frontbuffer return value separately v2: Instead of ignoring do drm_WARN_ON Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Reviewed-by:
-
- 28 Sep, 2023 13 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.7-rc1: UAPI Changes: - drm_file owner is now updated during use, in the case of a drm fd opened by the display server for a client, the correct owner is displayed. - Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo recycling. Cross-subsystem Changes: - Disable boot logo for au1200fb, mmpfb and unexport logo helpers. Only fbcon should manage display of logo. - Update freescale in MAINTAINERS. - Add some bridge files to bridge in MAINTAINERS. - Update gma500 driver repo in MAINTAINERS to point to drm-misc. Core Changes: - Move size computations to drm buddy allocator. - Make drm_atomic_helper_shutdown(NULL) a nop. - Assorted small fixes in drm_debugfs, DP-MST payload addition error handling. - Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling. - Handle bad (h/v)sync_end in EDID by clipping to htotal. - Build GPUVM as a module. Driver Changes: - Simple drivers don't need to cache prepared result. - Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot more drm drivers. - Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic, nouveau, tc358768. - Add NV12 for komeda writeback. - Add arbitration lost event to synopsis/dw-hdmi-cec. - Speed up s/r in nouveau by not restoring some big bo's. - Assorted nouveau display rework in preparation for GSP-RM, especially related to how the modeset sequence works and the DP sequence in relation to link training. - Update anx7816 panel. - Support NVSYNC and NHSYNC in tegra. - Allow multiple power domains in simple driver. Signed-off-by:
-
Imre Deak authored
Recompute the state of all CRTCs on an FDI link during a modeset that may be affected by the modeset of other CRTCs on the same link. This ensures that each CRTC on the link maximizes its BW use (after another CRTC is disabled). In practice this means recomputing pipe B's config on IVB if pipe C gets disabled. v2: - Add the change recomputing affected CRTC states in a separate patch. (Ville) v3: (Ville) - Constify old and new crtc states. - Check for fused off pipe C. - Fix new vs. old crtc state mixup. - Drop check for pipe C's enabled state. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
-
Imre Deak authored
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI lanes. Make the BW sharing more dynamic by trying to reduce pipe B's link bpp in this case, until pipe B uses only up to 2 FDI lanes. For this instead of the encoder compute config retry loop - which reduced link bpp only for the encoder's pipe - reduce the maximum link bpp for pipe B/C as required after all CRTC states are computed and recompute the CRTC states with the new bpp limit. Atm, all FDI encoder's compute config function returns an error if a BW constrain prevents increasing the pipe bpp value. The corresponding crtc_state->bw_constrained check can be replaced with checking crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an exception where this case is only handled in the outer config retry loop, failing the modeset with a WARN, add a FIXME comment to handle this in the encoder code similarly to other encoders. v2: - Don't assume that a CRTC is already in the atomic state, while reducing its link bpp. - Add DocBook description to intel_fdi_atomic_check_link(). v3: - Enable BW management for FDI links in a separate patch. (Ville) v4: (Ville) - Fail the SDVO encoder config computation if it doesn't support the link bpp limit. - Add TODO: comments about checking link_bpp_x16 instead of bw_constrained. v5: - Replace link bpp limit check with a FIXME: comment in intel_sdvo_compute_config(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
At the moment a modeset fails if the config computation of a pipe can't fit its required BW to the available link BW even though the limitation may be resolved by reducing the BW requirement of other pipes. To improve the above this patch adds helper functions checking the overall BW limits after all CRTC states have been computed. If the check fails the maximum link bpp for a selected pipe will be reduced and all the CRTC states will be recomputed until either the overall BW limit check passes, or further bpp reduction is not possible (because all pipes/encoders sharing the link BW reached their minimum link bpp). Atm, the MST encoder allocates twice the required BW for YUV420 format streams. A follow-up patchset will fix that, add a code comment about this. This change prepares for upcoming patches enabling the above BW management on FDI and MST links. v2: - Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani) v3: - Add the helper functions in a separate patch. (Ville) - Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville) - Return -ENOSPC instead of -EINVAL to userspace in case of a link BW limit failure. v4: - Make intel_atomic_check_config() static. v5: (Ville) - Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes and intel_link_bw_reset_pipe_limit_to_min() to intel_link_bw_set_min_bpp_for_pipe(). - Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp(). - Add FIXME: comment about MST encoder's YUV420 BW allocation and tracking the link bpp limit accordingly. v6: - Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville) - WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in intel_link_bw_set_bpp_limit_for_pipe(). (Ville) - Rename intel_link_bw_set_min_bpp_for_pipe() to intel_link_bw_set_bpp_limit_for_pipe() and intel_link_bw_limits::min_bpp_reached_pipes to bpp_limit_reached_pipes. (Ville) - Remove unused header includes. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Factor out intel_atomic_check_config() to check and compute all the CRTC states. This will be used by a follow up patch to recompute/check the state until required by BW limitations between CRTCs. Reviewed-by:
-
Imre Deak authored
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to clarify when the function can be called (vs. intel_modeset_pipes_in_mask_early()). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of pipes, used in a follow-up patch. As opposed to intel_modeset_all_pipes() which modesets only the active pipes - others don't requiring programming the HW - modeset all enabled pipes in intel_modeset_pipes_in_mask_early() which may need to recompute their state even if they are not active (that is in the DPMS off state). While at it add DocBook descriptions for the two exported functions. v2: - Add a flag controlling if active planes are force updated as well. - Add DockBook descriptions. v3: - For clarity use _early/_late suffixes for the exported functions instead of the update_active_planes parameter. (Ville) v4: - In intel_modeset_pipes_in_mask_early() update only the crtc flags relevant to the early phase. (Ville) - Rename intel_modeset_all_pipes() in a separate patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Limit the output link bpp in DSC mode to the link_config_limits link.min_bpp_x16 .. max_bpp_x16 range the same way it's done in non-DSC mode. Atm this doesn't make a difference, the link bpp range being 0 .. max pipe bpp, but a follow-up patch will need a way to reduce max link bpp below its current value. v2: - Add to_bpp_int_roundup() instead of open coding it. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Imre Deak authored
In non-DSC mode the link bpp can be set in 2*3 bpp steps in the pipe bpp range, while in DSC mode it can be set in 1/16 bpp steps to any value up to the maximum pipe bpp. Update the limits accordingly in both modes to prepare for a follow-up patch which may need to reduce the max link bpp value and starts to check the link bpp limits in DSC mode as well. While at it add more detail to the link limit debug print and print it also for DSC mode. v2: - Add to_bpp_frac_dec() instead of open coding it. (Jani) v3: (Ville) - Add BPP_X16_FMT / BPP_X16_ARG. - Add TODO: comment about initializing the DSC link bpp limits earlier. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Computing the non-DSC mode link config is redundant once it's determined that DSC will be needed, so skip computing it. In a follow-up patch this simplifies setting the link limits which are dependent on the DSC vs. non-DSC mode. While at it sanitize the debug print about the MST DSC fallback path, making it similar to the SST DSC one. Reviewed-by:
-
Imre Deak authored
A follow-up patch will need to limit the output link bpp both in the non-DSC and DSC configuration, so track the pipe and link bpp limits separately in the link_config_limits struct. Use .4 fixed point format for link bpp matching the 1/16 bpp granularity in DSC mode and for now keep this limit matching the pipe bpp limit. v2: (Jani) - Add to_bpp_int(), to_bpp_x16() helpers instead of opencoding them. - Rename link_config_limits::link.min/max_bpp to min/max_bpp_x16. Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Luca Coelho <luciano.coelho@intel.com> Reviewed-by:
-
Imre Deak authored
Factor out helpers that DP / DP_MST encoders can use to compute the link rate/lane count and bpp limits. A follow-up patch will call these to recalculate the limits if DSC compression is required. Reviewed-by:
-
Nirmoy Das authored
PIPE_CONTROL_FLUSH_L3 is not needed for aux invalidation so don't set that. Fixes: ad8ebf12 ("drm/i915/gt: Ensure memory quiesced before invalidation") Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Tapani Pälli <tapani.palli@intel.com> Cc: Mark Janes <mark.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Acked-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Tested-by:
Tapani Pälli <tapani.palli@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926142401.25687-1-nirmoy.das@intel.com
-
- 27 Sep, 2023 14 commits
-
-
Ville Syrjälä authored
Normally we could be in a deep PkgC state all the way up to the point when DSB starts its execution at the transcoders undelayed vblank. The DSB will then have to wait for the hardware to wake up before it can execute anything. This will waste a huge chunk of the vblank time just waiting, and risks the DSB execution spilling into the vertical active period. That will be very bad, especially when programming the LUTs as the anti-collision logic will cause DSB to corrupt LUT writes during vertical active. To avoid these problems we can instruct the DSB to pre-wake the display engine on a specific scanline so that everything will be 100% ready to go when we hit the transcoder's undelayed vblank. One annoyance is that the scanline is specified as just that, a single scanline. So if we happen to start the DSB execution after passing said scanline no DEwake will happen and we may drop back into some PkgC state before reaching the transcoder's undelayed vblank. To prevent that we'll use the "force DEwake" bit to manually force the display engine to stay awake. We'll then have to clear the force bit again after the DSB is done (the force bit remains effective even when the DSB is otherwise disabled). Signed-off-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
Add a helper to convert our idea of a scanline to the hw's idea of the same scanline (ie. apply crtc->scanline_offset in reverse). We'll need this to tell the DSB do stuff on a specific scanline. Signed-off-by:
-
Ville Syrjälä authored
The DSB code will want to know the maximum PkgC latency it has to contend with. Add a helper to expose that information. Signed-off-by:
-
Ville Syrjälä authored
We want to start the DSB execution from the transcoder's undelayed vblank, so in order to guarantee atomicity with the all the other mmio register writes we need to evade both vblanks. Note that currently we don't add any vblank delay, so this is effectively a nop. But in the future when we start to program double buffered registers from the DSB we'll need to delay the pipe's vblank to provide the register programming "window2" for the DSB. Signed-off-by:
-
Ville Syrjälä authored
The DSB has problems writing the legacy LUT. The two workarounds I've discoverted are: - write each entry twice back to back - use non-posted writes Let's use non-posted writes as that seems a bit more standard. TODO: measure which is faster Signed-off-by:
-
Ville Syrjälä authored
Loading LUTs with the DSB outside of vblank doesn't really work due to the palette anti-collision logic. Apparently the DSB register writes don't get stalled like CPU mmio writes do and instead we end up corrupting the LUT entries. Disabling the anti-collision logic would allow us to successfully load the LUT outside of vblank, but presumably that risks the LUT reads from the scanout (temporarily) getting corrupted data from the LUT instead. The anti-collision logic isn't active during vblank so that is when we can successfully load the LUT with the DSB. That is what we want to do anyway to avoid tearing. Signed-off-by:
-
Ville Syrjälä authored
Using the DSB for LUT loading during full modesets would require some actual though. Let's just use mmio for the time being. Signed-off-by:
-
Ville Syrjälä authored
Writing specific transcoder registers (and as it turns out, the legacy LUT as well) via DSB needs a magic sequence to emit non-posted register writes. Add a helper for this. Signed-off-by:
-
Ville Syrjälä authored
Add a function for emitting masked register writes. Note that the mask is implemented through byte enables, so can only mask off aligned 8bit sets of bits. Signed-off-by:
-
Ville Syrjälä authored
Add a helper for emitting a number of DSB NOOPs commands. Signed-off-by:
-
Ville Syrjälä authored
Add some defines to specify what goes inside certain DSB instructions. Signed-off-by:
-
Ville Syrjälä authored
Define all the DSB register bits so I don't have to look through bspec to find them. Signed-off-by:
-
Ville Syrjälä authored
Avoid the locking overhead for DSB registers. We don't need the locks and intel_dsb_commit() in particular needs to be called from the vblank evade critical section and thus needs to be fast. Signed-off-by:
-
Tvrtko Ursulin authored
Commit ade8a0f5 ("drm/i915: Make all GPU resets atomic") added a preempt disable section over the hardware reset callback to prepare the driver for being able to reset from atomic contexts. In retrospect I can see that the work item at a time was about removing the struct mutex from the reset path. Code base also briefly entertained the idea of doing the reset under stop_machine in order to serialize userspace mmap and temporary glitch in the fence registers (see eb8d0f5a ("drm/i915: Remove GPU reset dependence on struct_mutex"), but that never materialized and was soon removed in 2caffbf1 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") and replaced with a SRCU based solution. As such, as far as I can see, today we still have a requirement that resets must not sleep (invoked from submission tasklets), but no need to support invoking them from a truly atomic context. Given that the preemption section is problematic on RT kernels, since the uncore lock becomes a sleeping lock and so is invalid in such section, lets try and remove it. Potential downside is that our short waits on GPU to complete the reset may get extended if CPU scheduling interferes, but in practice that probably isn't a deal breaker. In terms of mechanics, since the preemption disabled block is being removed we just need to replace a few of the wait_for_atomic macros into busy looping versions which will work (and not complain) when called from non-atomic sections. v2: * Fix timeouts which are now in us. (Andi) * Update one comment as a drive by. (Andi) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
-
- 26 Sep, 2023 3 commits
-
-
Umesh Nerlige Ramappa authored
Ideally the busyness worker should take a gt pm wakeref because the worker only needs to be active while gt is awake. However, the gt_park path cancels the worker synchronously and this complicates the flow if the worker is also running at the same time. The cancel waits for the worker and when the worker releases the wakeref, that would call gt_park and would lead to a deadlock. The resolution is to take the global pm wakeref if runtime pm is already active. If not, we don't need to update the busyness stats as the stats would already be updated when the gt was parked. Note: - We do not requeue the worker if we cannot take a reference to runtime pm since intel_guc_busyness_unpark would requeue the worker in the resume path. - If the gt was parked longer than time taken for GT timestamp to roll over, we ignore those rollovers since we don't care about tracking the exact GT time. We only care about roll overs when the gt is active and running workloads. - There is a window of time between gt_park and runtime suspend, where the worker may run. This is acceptable since the worker will not find any new data to update busyness. v2: (Daniele) - Edit commit message and code comment - Use runtime pm in the worker - Put runtime pm after enabling the worker - Use Link tag and add Fixes tag v3: (Daniele) - Reword commit and comments and add details Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077 Fixes: 77cdd054 ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
-
Jani Nikula authored
Avoid including the world from headers when forward declarations suffice. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921155325.3851197-1-jani.nikula@intel.com
-
Jani Nikula authored
Convert aux_ch_name() to a helper that prints a string to a caller provided buffer, and use it to get more consistent aux channel debugs. Now that all users of aux_ch_name() are in intel_dp_aux.c, we can make it static too. Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
-
