1. 11 Aug, 2017 7 commits
    • Daniel Borkmann's avatar
      net: fix compilation when busy poll is not enabled · e4dde412
      Daniel Borkmann authored
      MIN_NAPI_ID is used in various places outside of
      CONFIG_NET_RX_BUSY_POLL wrapping, so when it's not set
      we run into build errors such as:
      
        net/core/dev.c: In function 'dev_get_by_napi_id':
        net/core/dev.c:886:16: error: ‘MIN_NAPI_ID’ undeclared (first use in this function)
          if (napi_id < MIN_NAPI_ID)
                        ^~~~~~~~~~~
      
      Thus, have MIN_NAPI_ID always defined to fix these errors.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4dde412
    • Anton Vasilyev's avatar
      mISDN: Fix null pointer dereference at mISDN_FsmNew · 54a6a043
      Anton Vasilyev authored
      If mISDN_FsmNew() fails to allocate memory for jumpmatrix
      then null pointer dereference will occur on any write to
      jumpmatrix.
      
      The patch adds check on successful allocation and
      corresponding error handling.
      
      Found by Linux Driver Verification project (linuxtesting.org).
      Signed-off-by: default avatarAnton Vasilyev <vasilyev@ispras.ru>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      54a6a043
    • Simon Horman's avatar
      nfp: do not update MTU from BH in flower app · bb3afda4
      Simon Horman authored
      The Flower app may receive a request to update the MTU of a representor
      netdev upon receipt of a control message from the firmware. This requires
      the RTNL lock which needs to be taken outside of the packet processing
      path.
      
      As a handling of this correctly seems a little to invasive for a fix simply
      skip setting the MTU for now.
      
      Relevant backtrace:
       [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100
       [ 1496.294911]  dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp]
       [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G           OE   4.13.0-rc3+ #3
       [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015
       [ 1496.294923] Workqueue: events work_for_cpu_fn
       [ 1496.294924] Call Trace:
       [ 1496.294927]  <IRQ>
       [ 1496.294931]  dump_stack+0x63/0x82
       [ 1496.294935]  __schedule_bug+0x54/0x70
       [ 1496.294937]  __schedule+0x62f/0x890
       [ 1496.294941]  ? intel_unmap_sg+0x90/0x90
       [ 1496.294942]  schedule+0x36/0x80
       [ 1496.294943]  schedule_preempt_disabled+0xe/0x10
       [ 1496.294945]  __mutex_lock.isra.2+0x445/0x4a0
       [ 1496.294947]  ? device_is_rmrr_locked+0x12/0x50
       [ 1496.294950]  ? kfree+0x162/0x170
       [ 1496.294952]  ? device_is_rmrr_locked+0x12/0x50
       [ 1496.294953]  ? iommu_should_identity_map+0x50/0xe0
       [ 1496.294954]  __mutex_lock_slowpath+0x13/0x20
       [ 1496.294955]  ? iommu_no_mapping+0x48/0xd0
       [ 1496.294956]  ? __mutex_lock_slowpath+0x13/0x20
       [ 1496.294957]  mutex_lock+0x2f/0x40
       [ 1496.294960]  rtnl_lock+0x15/0x20
       [ 1496.294979]  nfp_flower_cmsg_rx+0xc8/0x150 [nfp]
       [ 1496.294986]  nfp_ctrl_poll+0x286/0x350 [nfp]
       [ 1496.294989]  tasklet_action+0xf6/0x110
       [ 1496.294992]  __do_softirq+0xed/0x278
       [ 1496.294993]  irq_exit+0xb6/0xc0
       [ 1496.294994]  do_IRQ+0x4f/0xd0
       [ 1496.294996]  common_interrupt+0x89/0x89
      
      Fixes: 948faa46 ("nfp: add support for control messages for flower app")
      Signed-off-by: default avatarSimon Horman <simon.horman@netronome.com>
      Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb3afda4
    • Romain Perier's avatar
      net: stmmac: Use the right logging function in stmmac_mdio_register · fbca1647
      Romain Perier authored
      Currently, the function stmmac_mdio_register() is only used by
      stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus
      and probe information about the PHY. As this function is called before
      calling register_netdev(), all messages logged from stmmac_mdio_register
      are prefixed by "(unnamed net_device)". The goal of netdev_info or
      netdev_err is to dump useful infos about a net_device, when this data
      structure is partially initialized, there is no point for using these
      functions.
      
      This commit fixes the issue by replacing all netdev_*() by the
      corresponding dev_*() function for logging. The last netdev_info is
      replaced by phy_attached_info(), as a valid phydev can be used at this
      point.
      Signed-off-by: default avatarRomain Perier <romain.perier@collabora.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fbca1647
    • Konstantin Khlebnikov's avatar
      net/sched/hfsc: allocate tcf block for hfsc root class · 8d553738
      Konstantin Khlebnikov authored
      Without this filters cannot be attached.
      Signed-off-by: default avatarKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
      Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
      Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d553738
    • Andreas Born's avatar
      bonding: require speed/duplex only for 802.3ad, alb and tlb · ad729bc9
      Andreas Born authored
      The patch c4adfc82 ("bonding: make speed, duplex setting consistent
      with link state") puts the link state to down if
      bond_update_speed_duplex() cannot retrieve speed and duplex settings.
      Assumably the patch was written with 802.3ad mode in mind which relies
      on link speed/duplex settings. For other modes like active-backup these
      settings are not required. Thus, only for these other modes, this patch
      reintroduces support for slaves that do not support reporting speed or
      duplex such as wireless devices. This fixes the regression reported in
      bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547).
      
      Fixes: c4adfc82 ("bonding: make speed, duplex setting consistent
      with link state")
      Signed-off-by: default avatarAndreas Born <futur.andy@googlemail.com>
      Acked-by: default avatarMahesh Bandewar <maheshb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ad729bc9
    • Vivien Didelot's avatar
      net: dsa: ksz: fix skb freeing · e71cb9e0
      Vivien Didelot authored
      The DSA layer frees the original skb when an xmit function returns NULL,
      meaning an error occurred. But if the tagging code copied the original
      skb, it is responsible of freeing the copy if an error occurs.
      
      The ksz tagging code currently has two issues: if skb_put_padto fails,
      the skb copy is not freed, and the original skb will be freed twice.
      
      To fix that, move skb_put_padto inside both branches of the skb_tailroom
      condition, before freeing the original skb, and free the copy on error.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Reviewed-by: default avatarWoojung Huh <woojung.huh@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e71cb9e0
  2. 10 Aug, 2017 10 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 26273939
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.
      
       2) Fix stats handling in bcm_sysport_get_stats(), from Florian
          Fainelli.
      
       3) Reject 16777215 VNI value in geneve_validate(), from Girish
          Moodalbail.
      
       4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.
      
       5) Once a UFO fragmented frame is treated as UFO, we should continue
          doing so. Likewise once a frame has been segmented, we should
          continue doing that and not try to convert it to a UFO frame. From
          Willem de Bruijn.
      
       6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
          prevent races. From Willem de Bruijn.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        packet: fix tp_reserve race in packet_set_ring
        udp: consistently apply ufo or fragmentation
        net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
        igmp: Fix regression caused by igmp sysctl namespace code.
        geneve: maximum value of VNI cannot be used
        net: systemport: Fix software statistics for SYSTEMPORT Lite
        tipc: remove premature ESTABLISH FSM event at link synchronization
      26273939
    • Willem de Bruijn's avatar
      packet: fix tp_reserve race in packet_set_ring · c27927e3
      Willem de Bruijn authored
      Updates to tp_reserve can race with reads of the field in
      packet_set_ring. Avoid this by holding the socket lock during
      updates in setsockopt PACKET_RESERVE.
      
      This bug was discovered by syzkaller.
      
      Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt")
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c27927e3
    • Willem de Bruijn's avatar
      udp: consistently apply ufo or fragmentation · 85f1bd9a
      Willem de Bruijn authored
      When iteratively building a UDP datagram with MSG_MORE and that
      datagram exceeds MTU, consistently choose UFO or fragmentation.
      
      Once skb_is_gso, always apply ufo. Conversely, once a datagram is
      split across multiple skbs, do not consider ufo.
      
      Sendpage already maintains the first invariant, only add the second.
      IPv6 does not have a sendpage implementation to modify.
      
      A gso skb must have a partial checksum, do not follow sk_no_check_tx
      in udp_send_skb.
      
      Found by syzkaller.
      
      Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach")
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      85f1bd9a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc · f213ad38
      Linus Torvalds authored
      Pull sparc updates from David Miller:
      
       1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.
      
       2) Prevent crashes when bringing up sunvdc virtual block devices in
          some environments. From Jim Quigley.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
        sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
        sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
        sparc64: recognize and support sparc M8 cpu type
        sparc64: properly name the cpu constants
      f213ad38
    • Xin Long's avatar
      net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target · 96d97030
      Xin Long authored
      Commit 55917a21 ("netfilter: x_tables: add context to know if
      extension runs from nft_compat") introduced a member nft_compat to
      xt_tgchk_param structure.
      
      But it didn't set it's value for ipt_init_target. With unexpected
      value in par.nft_compat, it may return unexpected result in some
      target's checkentry.
      
      This patch is to set all it's fields as 0 and only initialize the
      non-zero fields in ipt_init_target.
      
      v1->v2:
        As Wang Cong's suggestion, fix it by setting all it's fields as
        0 and only initializing the non-zero fields.
      
      Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
      Suggested-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96d97030
    • Nikolay Borisov's avatar
      igmp: Fix regression caused by igmp sysctl namespace code. · 1714020e
      Nikolay Borisov authored
      Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file")
      moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This
      function is only called as part of per-namespace initialization, only if
      CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is
      compiled out, casuing the igmp pernet ops to not be registerd and those sysctl
      being left initialized with 0. However, there are certain functions, such as
      ip_mc_join_group which are always compiled and make use of some of those
      sysctls. Let's do a partial revert of the aforementioned commit and move the
      sysctl initialization into inet_init_net, that way they will always have
      sane values.
      
      Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file")
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by: default avatarGerardo Exequiel Pozzi <vmlinuz386@gmail.com>
      Signed-off-by: default avatarNikolay Borisov <nborisov@suse.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1714020e
    • Girish Moodalbail's avatar
      geneve: maximum value of VNI cannot be used · 04db70d9
      Girish Moodalbail authored
      Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range
      of values for it would be from 0 to 16777215 (2^24 -1).  However, one
      cannot create a geneve device with VNI set to 16777215. This patch fixes
      this issue.
      Signed-off-by: default avatarGirish Moodalbail <girish.moodalbail@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04db70d9
    • Florian Fainelli's avatar
      net: systemport: Fix software statistics for SYSTEMPORT Lite · 50ddfbaf
      Florian Fainelli authored
      With SYSTEMPORT Lite we have holes in our statistics layout that make us
      skip over the hardware MIB counters, bcm_sysport_get_stats() was not
      taking that into account resulting in reporting 0 for all SW-maintained
      statistics, fix this by skipping accordingly.
      
      Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50ddfbaf
    • Jon Paul Maloy's avatar
      tipc: remove premature ESTABLISH FSM event at link synchronization · ed43594a
      Jon Paul Maloy authored
      When a link between two nodes come up, both endpoints will initially
      send out a STATE message to the peer, to increase the probability that
      the peer endpoint also is up when the first traffic message arrives.
      Thereafter, if the establishing link is the second link between two
      nodes, this first "traffic" message is a TUNNEL_PROTOCOL/SYNCH message,
      helping the peer to perform initial synchronization between the two
      links.
      
      However, the initial STATE message may be lost, in which case the SYNCH
      message will be the first one arriving at the peer. This should also
      work, as the SYNCH message itself will be used to take up the link
      endpoint before  initializing synchronization.
      
      Unfortunately the code for this case is broken. Currently, the link is
      brought up through a tipc_link_fsm_evt(ESTABLISHED) when a SYNCH
      arrives, whereupon __tipc_node_link_up() is called to distribute the
      link slots and take the link into traffic. But, __tipc_node_link_up() is
      itself starting with a test for whether the link is up, and if true,
      returns without action. Clearly, the tipc_link_fsm_evt(ESTABLISHED) call
      is unnecessary, since tipc_node_link_up() is itself issuing such an
      event, but also harmful, since it inhibits tipc_node_link_up() to
      perform the test of its tasks, and the link endpoint in question hence
      is never taken into traffic.
      
      This problem has been exposed when we set up dual links between pre-
      and post-4.4 kernels, because the former ones don't send out the
      initial STATE message described above.
      
      We fix this by removing the unnecessary event call.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed43594a
    • Jim Quigley's avatar
      sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain · 3ee70591
      Jim Quigley authored
      Using mpgroup to define multiple paths for a virtual disk causes multiple
      virtual-device-port ports to be created for that virtual device.
      Each virtual-device-port port then gets a vdisk created for it by the Linux
      sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it
      cannot handle multiple ports for a single vdisk, leading to a kernel panic
      at startup.
      
      This fix prevents more than one vdisk per virtual-device-port being created
      until full virtual disk multipathing (mpgroup) support is implemented.
      Signed-off-by: default avatarJim Quigley <Jim.Quigley@oracle.com>
      Reviewed-by: default avatarLiam Merwick <liam.merwick@oracle.com>
      Reviewed-by: default avatarShannon Nelson <shannon.nelson@oracle.com>
      Reviewed-by: default avatarAlexandre Chartre <alexandre.chartre@oracle.com>
      Reviewed-by: default avatarAaron Young <aaron.young@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3ee70591
  3. 09 Aug, 2017 14 commits
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · 8d31f80e
      Linus Torvalds authored
      Pull pin control fixes from Linus Walleij:
       "These are the pin control fixes I have gathered since the return from
        my vacation. They boiled in -next a while so let's get them in.
      
        Apart from the documentation build it is purely driver fixes. Which is
        nice. The Intel fixes seem kind of important.
      
         - Fix the documentation build as the docs were moved
      
         - Correct the UART pin list on the Intel Merrifield
      
         - Fix pin assignment and number of pins on the Marvell Armada 37xx
           pin controller
      
         - Cover the Setzer models in the Chromebook DMI quirk in the Intel
           cheryview driver so they start working
      
         - Add the missing "sim" function to the sunxi driver
      
         - Fix USB pin definitions on Uniphier Pro4
      
         - Smatch fix for invalid reference in the zx pin control driver"
      
      * tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
        pinctrl: generic: update references to Documentation/pinctrl.txt
        pinctrl: intel: merrifield: Correct UART pin lists
        pinctrl: armada-37xx: Fix number of pin in south bridge
        pinctrl: armada-37xx: Fix the pin 23 on south bridge
        pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk
        pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
        pinctrl: uniphier: fix USB3 pin assignment for Pro4
        pinctrl: zte: fix dereference of 'data' in zx_set_mux()
      8d31f80e
    • Mel Gorman's avatar
      futex: Remove unnecessary warning from get_futex_key · 48fb6f4d
      Mel Gorman authored
      Commit 65d8fc77 ("futex: Remove requirement for lock_page() in
      get_futex_key()") removed an unnecessary lock_page() with the
      side-effect that page->mapping needed to be treated very carefully.
      
      Two defensive warnings were added in case any assumption was missed and
      the first warning assumed a correct application would not alter a
      mapping backing a futex key.  Since merging, it has not triggered for
      any unexpected case but Mark Rutland reported the following bug
      triggering due to the first warning.
      
        kernel BUG at kernel/futex.c:679!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3
        Hardware name: linux,dummy-virt (DT)
        task: ffff80001e271780 task.stack: ffff000010908000
        PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
        LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
        pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145
      
      The fact that it's a bug instead of a warning was due to an unrelated
      arm64 problem, but the warning itself triggered because the underlying
      mapping changed.
      
      This is an application issue but from a kernel perspective it's a
      recoverable situation and the warning is unnecessary so this patch
      removes the warning.  The warning may potentially be triggered with the
      following test program from Mark although it may be necessary to adjust
      NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the
      system.
      
          #include <linux/futex.h>
          #include <pthread.h>
          #include <stdio.h>
          #include <stdlib.h>
          #include <sys/mman.h>
          #include <sys/syscall.h>
          #include <sys/time.h>
          #include <unistd.h>
      
          #define NR_FUTEX_THREADS 16
          pthread_t threads[NR_FUTEX_THREADS];
      
          void *mem;
      
          #define MEM_PROT  (PROT_READ | PROT_WRITE)
          #define MEM_SIZE  65536
      
          static int futex_wrapper(int *uaddr, int op, int val,
                                   const struct timespec *timeout,
                                   int *uaddr2, int val3)
          {
              syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3);
          }
      
          void *poll_futex(void *unused)
          {
              for (;;) {
                  futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1);
              }
          }
      
          int main(int argc, char *argv[])
          {
              int i;
      
              mem = mmap(NULL, MEM_SIZE, MEM_PROT,
                     MAP_SHARED | MAP_ANONYMOUS, -1, 0);
      
              printf("Mapping @ %p\n", mem);
      
              printf("Creating futex threads...\n");
      
              for (i = 0; i < NR_FUTEX_THREADS; i++)
                  pthread_create(&threads[i], NULL, poll_futex, NULL);
      
              printf("Flipping mapping...\n");
              for (;;) {
                  mmap(mem, MEM_SIZE, MEM_PROT,
                       MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0);
              }
      
              return 0;
          }
      Reported-and-tested-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Cc: stable@vger.kernel.org # 4.7+
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      48fb6f4d
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 358f8c26
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
       "The main thing is to allow empty id_tables for ACPI to make some
        drivers get probed again. It looks a bit bigger than usual because it
        needs some internal renaming, too.
      
        Other than that, there is a fix for broken DSTDs, a super simple
        enablement for ARM MPS, and two documentation fixes which I'd like to
        see in v4.13 already"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: rephrase explanation of I2C_CLASS_DEPRECATED
        i2c: allow i2c-versatile for ARM MPS platforms
        i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz
        i2c: designware: Print clock freq on invalid clock freq error
        i2c: core: Allow empty id_table in ACPI case as well
        i2c: mux: pinctrl: mention correct module name in Kconfig help text
      358f8c26
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 31cf92f3
      Linus Torvalds authored
      Pull block fixes from Jens Axboe:
       "Three patches that should go into this release.
      
        Two of them are from Paolo and fix up some corner cases with BFQ, and
        the last patch is from Ming and fixes up a potential usage count
        imbalance regression due to the recent NOWAIT work"
      
      * 'for-linus' of git://git.kernel.dk/linux-block:
        blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed
        block, bfq: consider also in_service_entity to state whether an entity is active
        block, bfq: reset in_service_entity if it becomes idle
      31cf92f3
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · d555eb6b
      Linus Torvalds authored
      Pull crypto fixes from Herbert Xu:
       "Fix two regressions in the inside-secure driver with respect to
        hmac(sha1)"
      
      * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
        crypto: inside-secure - fix the sha state length in hmac_sha1_setkey
        crypto: inside-secure - fix invalidation check in hmac_sha1_setkey
      d555eb6b
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4530cca1
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "The pull requests are getting smaller, that's progress I suppose :-)
      
         1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi.
      
         2) Fix remote checksum handling in VXLAN and GUE tunneling drivers,
            from Koichiro Den.
      
         3) Missing u64_stats_init() calls in several drivers, from Florian
            Fainelli.
      
         4) TCP can set the congestion window to an invalid ssthresh value
            after congestion window reductions, from Yuchung Cheng.
      
         5) Fix BPF jit branch generation on s390, from Daniel Borkmann.
      
         6) Correct MIPS ebpf JIT merge, from David Daney.
      
         7) Correct byte order test in BPF test_verifier.c, from Daniel
            Borkmann.
      
         8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins.
      
         9) Handle SCTP checksums properly in mlx4 driver, from Davide
            Caratti.
      
        10) We can potentially enter tcp_connect() with a cached route
            already, due to fastopen, so we have to explicitly invalidate it.
      
        11) skb_warn_bad_offload() can bark in legitimate situations, fix from
            Willem de Bruijn"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
        net: avoid skb_warn_bad_offload false positives on UFO
        qmi_wwan: fix NULL deref on disconnect
        ppp: fix xmit recursion detection on ppp channels
        rds: Reintroduce statistics counting
        tcp: fastopen: tcp_connect() must refresh the route
        net: sched: set xt_tgchk_param par.net properly in ipt_init_target
        net: dsa: mediatek: add adjust link support for user ports
        net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets
        qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'
        hysdn: fix to a race condition in put_log_buffer
        s390/qeth: fix L3 next-hop in xmit qeth hdr
        asix: Fix small memory leak in ax88772_unbind()
        asix: Ensure asix_rx_fixup_info members are all reset
        asix: Add rx->ax_skb = NULL after usbnet_skb_return()
        bpf: fix selftest/bpf/test_pkt_md_access on s390x
        netvsc: fix race on sub channel creation
        bpf: fix byte order test in test_verifier
        xgene: Always get clk source, but ignore if it's missing for SGMII ports
        MIPS: Add missing file for eBPF JIT.
        bpf, s390: fix build for libbpf and selftest suite
        ...
      4530cca1
    • Willem de Bruijn's avatar
      net: avoid skb_warn_bad_offload false positives on UFO · 8d63bee6
      Willem de Bruijn authored
      skb_warn_bad_offload triggers a warning when an skb enters the GSO
      stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL
      checksum offload set.
      
      Commit b2504a5d ("net: reduce skb_warn_bad_offload() noise")
      observed that SKB_GSO_DODGY producers can trigger the check and
      that passing those packets through the GSO handlers will fix it
      up. But, the software UFO handler will set ip_summed to
      CHECKSUM_NONE.
      
      When __skb_gso_segment is called from the receive path, this
      triggers the warning again.
      
      Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On
      Tx these two are equivalent. On Rx, this better matches the
      skb state (checksum computed), as CHECKSUM_NONE here means no
      checksum computed.
      
      See also this thread for context:
      http://patchwork.ozlabs.org/patch/799015/
      
      Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise")
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d63bee6
    • Bjørn Mork's avatar
      qmi_wwan: fix NULL deref on disconnect · bbae08e5
      Bjørn Mork authored
      qmi_wwan_disconnect is called twice when disconnecting devices with
      separate control and data interfaces.  The first invocation will set
      the interface data to NULL for both interfaces to flag that the
      disconnect has been handled.  But the matching NULL check was left
      out when qmi_wwan_disconnect was added, resulting in this oops:
      
        usb 2-1.4: USB disconnect, device number 4
        qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device
        BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
        IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan]
        PGD 0
        P4D 0
        Oops: 0000 [#1] SMP
        Modules linked in: <stripped irrelevant module list>
        CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G            E   4.12.3-nr44-normandy-r1500619820+ #1
        Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017
        Workqueue: usb_hub_wq hub_event [usbcore]
        task: ffff8c882b716040 task.stack: ffffb8e800d84000
        RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan]
        RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246
        RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
        RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400
        RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000
        R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8
        R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000
        FS:  0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000
        CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
        CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0
        Call Trace:
         ? usb_unbind_interface+0x71/0x270 [usbcore]
         ? device_release_driver_internal+0x154/0x210
         ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan]
         ? usbnet_disconnect+0x6c/0xf0 [usbnet]
         ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan]
         ? usb_unbind_interface+0x71/0x270 [usbcore]
         ? device_release_driver_internal+0x154/0x210
      Reported-and-tested-by: default avatarNathaniel Roach <nroach44@gmail.com>
      Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
      Cc: Daniele Palmas <dnlplm@gmail.com>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbae08e5
    • Guillaume Nault's avatar
      ppp: fix xmit recursion detection on ppp channels · 0a0e1a85
      Guillaume Nault authored
      Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp
      devices") dropped the xmit_recursion counter incrementation in
      ppp_channel_push() and relied on ppp_xmit_process() for this task.
      But __ppp_channel_push() can also send packets directly (using the
      .start_xmit() channel callback), in which case the xmit_recursion
      counter isn't incremented anymore. If such packets get routed back to
      the parent ppp unit, ppp_xmit_process() won't notice the recursion and
      will call ppp_channel_push() on the same channel, effectively creating
      the deadlock situation that the xmit_recursion mechanism was supposed
      to prevent.
      
      This patch re-introduces the xmit_recursion counter incrementation in
      ppp_channel_push(). Since the xmit_recursion variable is now part of
      the parent ppp unit, incrementation is skipped if the channel doesn't
      have any. This is fine because only packets routed through the parent
      unit may enter the channel recursively.
      
      Finally, we have to ensure that pch->ppp is not going to be modified
      while executing ppp_channel_push(). Instead of taking this lock only
      while calling ppp_xmit_process(), we now have to hold it for the full
      ppp_channel_push() execution. This respects the ppp locks ordering
      which requires locking ->upl before ->downl.
      
      Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0a0e1a85
    • Håkon Bugge's avatar
      rds: Reintroduce statistics counting · 05bfd7db
      Håkon Bugge authored
      In commit 7e3f2952 ("rds: don't let RDS shutdown a connection
      while senders are present"), refilling the receive queue was removed
      from rds_ib_recv(), along with the increment of
      s_ib_rx_refill_from_thread.
      
      Commit 73ce4317 ("RDS: make sure we post recv buffers")
      re-introduces filling the receive queue from rds_ib_recv(), but does
      not add the statistics counter. rds_ib_recv() was later renamed to
      rds_ib_recv_path().
      
      This commit reintroduces the statistics counting of
      s_ib_rx_refill_from_thread and s_ib_rx_refill_from_cq.
      Signed-off-by: default avatarHåkon Bugge <haakon.bugge@oracle.com>
      Reviewed-by: default avatarKnut Omang <knut.omang@oracle.com>
      Reviewed-by: default avatarWei Lin Guay <wei.lin.guay@oracle.com>
      Reviewed-by: default avatarShamir Rabinovitch <shamir.rabinovitch@oracle.com>
      Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      05bfd7db
    • Eric Dumazet's avatar
      tcp: fastopen: tcp_connect() must refresh the route · 8ba60924
      Eric Dumazet authored
      With new TCP_FASTOPEN_CONNECT socket option, there is a possibility
      to call tcp_connect() while socket sk_dst_cache is either NULL
      or invalid.
      
       +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4
       +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
       +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0
       +0 connect(4, ..., ...) = 0
      
      << sk->sk_dst_cache becomes obsolete, or even set to NULL >>
      
       +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000
      
      We need to refresh the route otherwise bad things can happen,
      especially when syzkaller is running on the host :/
      
      Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support")
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Wei Wang <weiwan@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: default avatarWei Wang <weiwan@google.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ba60924
    • Xin Long's avatar
      net: sched: set xt_tgchk_param par.net properly in ipt_init_target · ec0acb09
      Xin Long authored
      Now xt_tgchk_param par in ipt_init_target is a local varibale,
      par.net is not initialized there. Later when xt_check_target
      calls target's checkentry in which it may access par.net, it
      would cause kernel panic.
      
      Jaroslav found this panic when running:
      
        # ip link add TestIface type dummy
        # tc qd add dev TestIface ingress handle ffff:
        # tc filter add dev TestIface parent ffff: u32 match u32 0 0 \
          action xt -j CONNMARK --set-mark 4
      
      This patch is to pass net param into ipt_init_target and set
      par.net with it properly in there.
      
      v1->v2:
        As Wang Cong pointed, I missed ipt_net_id != xt_net_id, so fix
        it by also passing net_id to __tcf_ipt_init.
      v2->v3:
        Missed the fixes tag, so add it.
      
      Fixes: ecb2421b ("netfilter: add and use nf_ct_netns_get/put")
      Reported-by: default avatarJaroslav Aster <jaster@redhat.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec0acb09
    • John Crispin's avatar
      net: dsa: mediatek: add adjust link support for user ports · 8e6f1521
      John Crispin authored
      Manually adjust the port settings of user ports once PHY polling has
      completed. This patch extends the adjust_link callback to configure the
      per port PMCR register, applying the proper values polled from the PHY.
      Without this patch flow control was not always getting setup properly.
      Signed-off-by: default avatarShashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
      Signed-off-by: default avatarMuciri Gatimu <muciri@openmesh.com>
      Signed-off-by: default avatarJohn Crispin <john@phrozen.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8e6f1521
    • Davide Caratti's avatar
      net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets · e718fe45
      Davide Caratti authored
      if the NIC fails to validate the checksum on TCP/UDP, and validation of IP
      checksum is successful, the driver subtracts the pseudo-header checksum
      from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't
      do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails.
      
      V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set
      Reported-by: default avatarShuang Li <shuali@redhat.com>
      Fixes: f8c6455b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE")
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Acked-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e718fe45
  4. 08 Aug, 2017 9 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · bfa738cf
      Linus Torvalds authored
      Pull rdma fixes from Doug Ledford:
       "Third set of -rc fixes for 4.13 cycle
      
         - small set of miscellanous fixes
      
         - a reasonably sizable set of IPoIB fixes that deal with multiple
           long standing issues"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
        IB/hns: checking for IS_ERR() instead of NULL
        RDMA/mlx5: Fix existence check for extended address vector
        IB/uverbs: Fix device cleanup
        RDMA/uverbs: Prevent leak of reserved field
        IB/core: Fix race condition in resolving IP to MAC
        IB/ipoib: Notify on modify QP failure only when relevant
        Revert "IB/core: Allow QP state transition from reset to error"
        IB/ipoib: Remove double pointer assigning
        IB/ipoib: Clean error paths in add port
        IB/ipoib: Add get statistics support to SRIOV VF
        IB/ipoib: Add multicast packets statistics
        IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initialization
        IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qp
        IB/ipoib: Make sure no in-flight joins while leaving that mcast
        IB/ipoib: Use cancel_delayed_work_sync when needed
        IB/ipoib: Fix race between light events and interface restart
      bfa738cf
    • Joe Perches's avatar
      parse-maintainers: Move matching sections from MAINTAINERS · b95c29a2
      Joe Perches authored
      Allow any number of command line arguments to match either the
      section header or the section contents and create new files.
      
      Create MAINTAINERS.new and SECTION.new.
      
      This allows scripting of the movement of various sections from
      MAINTAINERS.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b95c29a2
    • Joe Perches's avatar
      parse-maintainers: Use perl hash references and specific filenames · fe909030
      Joe Perches authored
      Instead of reading STDIN and writing STDOUT, use specific filenames of
      MAINTAINERS and MAINTAINERS.new.
      
      Use hash references instead of global hash %hash so future modifications
      can read and write specific hashes to split up MAINTAINERS into multiple
      files using a script.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fe909030
    • Joe Perches's avatar
      parse-maintainers: Add section pattern sorting · 61f74164
      Joe Perches authored
      Section [A-Z]: patterns are not currently in any required sorting order.
      Add a specific sorting sequence to MAINTAINERS entries.
      Sort F: and X: patterns in alphabetic order.
      
      The preferred section ordering is:
      
        SECTION HEADER
        M:	Maintainers
        R:	Reviewers
        P:	Named persons without email addresses
        L:	Mailing list addresses
        S:	Status of this section (Supported, Maintained, Orphan, etc...)
        W:	Any relevant URLs
        T:	Source code control type (git, quilt, etc)
        Q:	Patchwork patch acceptance queue site
        B:	Bug tracking URIs
        C:	Chat URIs
        F:	Files with wildcard patterns (alphabetic ordered)
        X:	Excluded files with wildcard patterns (alphabetic ordered)
        N:	Files with regex patterns
        K:	Keyword regexes in source code for maintainership identification
      
      Miscellaneous perl neatening:
      
       - Rename %map to %hash, map has a different meaning in perl
       - Avoid using \& and local variables for function indirection
       - Use return for a little c like clarity
       - Use c-like function call style instead of &function
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      61f74164
    • Joe Perches's avatar
      get_maintainer: Prepare for separate MAINTAINERS files · 6f7d98ec
      Joe Perches authored
      Allow for MAINTAINERS to become a directory and if it is,
      read all the files in the directory for maintained sections.
      
      Optionally look for all files named MAINTAINERS in directories
      excluding the .git directory by using --find-maintainer-files.
      
      This optional feature adds ~.3 seconds of CPU on an Intel
      i5-6200 with an SSD.
      
      Miscellanea:
      
       - Create a read_maintainer_file subroutine from the existing code
       - Test only the existence of MAINTAINERS, not whether it's a file
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6f7d98ec
    • Randy Dunlap's avatar
      MAINTAINERS: openbmc mailing list is moderated · 6209ef67
      Randy Dunlap authored
      The openbmc mailing list is moderated for non-subscribers.
      Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Acked-by: default avatarBrendan Higgins <brendanhiggins@google.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Joel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6209ef67
    • Sedat Dilek's avatar
      MAINTAINERS: greybus: Fix typo s/LOOBACK/LOOPBACK · a1ffc2d2
      Sedat Dilek authored
      Fixes: f47e07bc ("Fix up MAINTAINERS file problems")
      Cc: Joe Perches <joe@perches.com>
      Signed-off-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a1ffc2d2
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · de70be0a
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "Two small fixes, one re-fix of a previous fix and five patches sorting
        out hotplug in the bnx2X class of drivers. The latter is rather
        involved, but necessary because these drivers have started dropping
        lockdep recursion warnings on the hotplug lock because of its
        conversion to a percpu rwsem"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: sg: only check for dxfer_len greater than 256M
        scsi: aacraid: reading out of bounds
        scsi: qedf: Limit number of CQs
        scsi: bnx2i: Simplify cpu hotplug code
        scsi: bnx2fc: Simplify CPU hotplug code
        scsi: bnx2i: Prevent recursive cpuhotplug locking
        scsi: bnx2fc: Prevent recursive cpuhotplug locking
        scsi: bnx2fc: Plug CPU hotplug race
      de70be0a
    • Helge Deller's avatar
      random: fix warning message on ia64 and parisc · 51d96dc2
      Helge Deller authored
      Fix the warning message on the parisc and IA64 architectures to show the
      correct function name of the caller by using %pS instead of %pF. The
      message is printed with the value of _RET_IP_ which calls
      __builtin_return_address(0) and as such returns the IP address caller
      instead of pointer to a function descriptor of the caller.
      
      The effect of this patch is visible on the parisc and ia64 architectures
      only since those are the ones which use function descriptors while on
      all others %pS and %pF will behave the same.
      
      Cc: Theodore Ts'o <tytso@mit.edu>
      Cc: Jason A. Donenfeld <Jason@zx2c4.com>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Fixes: eecabf56 ("random: suppress spammy warnings about unseeded randomness")
      Fixes: d06bfd19 ("random: warn when kernel uses unseeded randomness")
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      51d96dc2