Pull power management fixes from Rafael J. Wysocki:

 - Fix for two recent regressions in the generic PM domains framework.

 - Revert of a commit that introduced a resume regression and is
   conceptually incorrect in my opinion.

 - Fix for a return value in pcc-cpufreq.c from Julia Lawall.

 - RTC wakeup signaling fix from Neil Brown.

 - Suppression of compiler warnings for CONFIG_PM_SLEEP unset in ACPI,
   platform/x86 and TPM drivers.

* tag 'pm-for-3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tpm_tis / PM: Fix unused function warning for CONFIG_PM_SLEEP
  platform / x86 / PM: Fix unused function warnings for CONFIG_PM_SLEEP
  ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEP
  Revert "NMI watchdog: fix for lockup detector breakage on resume"
  PM: Make dev_pm_get_subsys_data() always return 0 on success
  drivers/cpufreq/pcc-cpufreq.c: fix error return code
  RTC: Avoid races between RTC alarm wakeup and suspend.

Pull arm-soc bug fixes from Arnd Bergmann:
 "These are a bunch of bug fixes that came in after the merge window and
  one update for the MAINTAINERS file.

  The largest part of the fixes are patches that address bugs found by
  building all the ARM defconfig files.  There are a lot more warnings
  that we have patches for, but the others are either still under
  discussion or are harmless and do not cause actual problems besides
  making the build slightly noisy."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
  ARM: davinci: remove broken ntosd2_init_i2c
  ARM: s3c24xx: enable CONFIG_BUG for tct_hammer
  omap-rng: fix use of SIMPLE_DEV_PM_OPS
  spi/s3c64xx: improve error handling
  mtd/omap2: fix dmaengine_slave_config error handling
  gpio: em: do not discard em_gio_irq_domain_cleanup
  ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
  ARM: imx: gpmi-nand depends on mxs-dma
  ARM: integrator: include <linux/export.h>
  ARM: s3c24xx: use new PWM driver
  ARM: sa1100: include linux/io.h in hackkit leds code
  Input: eeti_ts: pass gpio value instead of IRQ
  ARM: pxa: remove irq_to_gpio from ezx-pcap driver
  ARM: tegra: more regulator fixes for Harmony
  usb/ohci-omap: remove unused variable
  mfd/asic3: fix asic3_mfd_probe return value
  ARM: kirkwood: fix typo in Makefile.boot
  i.MX27: Fix emma-prp and csi clocks.
  ARM: integrator: use clk_prepare_enable() for timer
  MAINTAINERS: update entry for Linus Walleij
  ...

Merge branch 'fixes-for-linus-for-3.6-rc2' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull three dma-mapping fixes from Marek Szyprowski.

* 'fixes-for-linus-for-3.6-rc2' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: fix incorrect freeing of atomic allocations
  ARM: dma-mapping: fix atomic allocation alignment
  ARM: mm: fix MMU mapping of CMA regions

Pull btrfs merge fix from Chris Mason:
 "This fixes a merge error in rc1.  The calls to mnt_want_write should
  have been removed."

* 'for-linus-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: remove mnt_want_write call in btrfs_mksubvol

While tracking down a weird buffer overflow issue in a program that
looked to be sane, I started double checking the length returned by
syslog(SYSLOG_ACTION_READ_ALL, ...) to make sure it wasn't overflowing
the buffer.

Sure enough, it was.  I saw this in strace:

  11339 syslog(SYSLOG_ACTION_READ_ALL, "<5>[244017.708129] REISERFS (dev"..., 8192) = 8279

It turns out that the loops that calculate how much space the entries
will take when they're copied don't include the newlines and prefixes
that will be included in the final output since prev flags is passed as
zero.

This patch properly accounts for it and fixes the overflow.

CC: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

According to a compiler warning, the tpm_tis_resume() function is not
used for CONFIG_PM_SLEEP unset, so add a #ifdef to prevent it from
being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

According to compiler warnings, quite some suspend/resume functions
in platform x86 drivers are not used for CONFIG_PM_SLEEP unset, so
add #ifdefs to prevent them from being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

According to compiler warnings, several suspend/resume functions
in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add
#ifdefs to prevent them from being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to
be populated with at least one member. gcc correctly warns about
the out-of-bounds access here.

Since this can not possibly work, it's better to disable i2c
support entirely on this board.

Without this patch, building davinci_all_defconfig results in:

arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init':
arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Andrey Porodko <panda@chelcom.ru>

Disabling CONFIG_BUG creates an insane amount of build warnings, which
makes it useless to check for building defconfigs to see if new
warnings show up.

Without this patch, building tct_hammer_defconfig results in:

net/packet/af_packet.c: In function 'tpacket_rcv':
net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized]
net/core/ethtool.c: In function 'ethtool_get_feature_mask':
net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type]
block/cfq-iosched.c: In function 'cfq_async_queue_prio':
block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type]
mm/bootmem.c: In function 'mark_bootmem':
mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type]
net/core/dev.c: In function 'skb_warn_bad_offload':
net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable]
drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup':
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
(and many more)

The size of vmlinux increases by 1.78% because of this:

size obj-arm/vmlinux.nobug
   text    data     bss     dec     hex filename
   2108474  116916   55352 2280742  22cd26 obj-arm/vmlinux
size obj-arm/vmlinux.bug
   text    data     bss     dec     hex filename
   2150804  116916   53696 2321416  236c08 obj-arm/vmlinux
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>

These patches all fix bugs that were newly introduced in v3.6-rc1
and found because they cause a gcc warning with one of the ARM
defconfigs. Most of them are harmless, but since we're trying
to get rid of all warnings eventually, we can start with the ones
that were not there before.

* testing/new-warnings:
  omap-rng: fix use of SIMPLE_DEV_PM_OPS
  spi/s3c64xx: improve error handling
  mtd/omap2: fix dmaengine_slave_config error handling
  gpio: em: do not discard em_gio_irq_domain_cleanup
  ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
  usb/ohci-omap: remove unused variable
  mfd/asic3: fix asic3_mfd_probe return value
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

omap_rng_suspend and omap_rng_resume are unused if CONFIG_PM is enabled
but CONFIG_PM_SLEEP is disabled. I found this while building all defconfig
files on ARM. It's not clear to me if this is the right solution, but
at least it makes the code consistent again.

Without this patch, building omap1_defconfig results in:

drivers/char/hw_random/omap-rng.c:165:12: warning: 'omap_rng_suspend' defined but not used [-Wunused-function]
drivers/char/hw_random/omap-rng.c:171:12: warning: 'omap_rng_resume' defined but not used [-Wunused-function]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman <khilman@ti.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Herbert Xu <herbert@gondor.apana.org.au>

When a device tree definition os an s3c64xx SPI master is missing
a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata
function might use uninitialized memory in place of that node,
which was correctly reported by gcc.

Without this patch, building s3c6400_defconfig results in:

drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25':
drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>

The newly added dmaengine support in the omap2 nand driver
potentially causes an undefined return value from the
omap_nand_probe function when dmaengine_slave_config
reports an error. Let's handle this by returning the
same error back to the caller.

Without this patch, building omap2plus_defconfig results in:

drivers/mtd/nand/omap2.c: In function 'omap_nand_probe':
drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Grazvydas Ignotas <notasas@gmail.com>

The newly added gpio-em driver marks its em_gio_irq_domain_cleanup
function as __devexit, which would lead to that function being
discarded in case CONFIG_HOTPLUG is disabled. However, the function
is also called by the error handling logic em_gio_probe, which
would cause a jump into a NULL pointer if it was removed from the
kernel or module.

Without this patch, building kzm9d_defconfig results in:

WARNING: drivers/gpio/built-in.o(.devinit.text+0x330): Section mismatch in reference from the function em_gio_probe() to the function .devexit.text:em_gio_irq_domain_cleanup()
The function __devinit em_gio_probe() references
a function __devexit em_gio_irq_domain_cleanup().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
em_gio_irq_domain_cleanup() so it may be used outside an exit section.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Magnus Damm <damm@opensource.se>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>

exynos_pm_add_dev_to_genpd is used if one or more out of a large
number of Kconfig symbols are enabled. However the new
exynos_defconfig selects none of those, so the function becomes
unused. Marking it so lets the compiler automatically discard
it.

Without this patch, building exynos_defconfig results in:

arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>

We got a recursive lock in mksubvol because the caller already held
a lock. I think we got into this due to a merge error. Commit a874a63e
removed the mnt_want_write call from btrfs_mksubvol and added a
replacement call to mnt_want_write_file in btrfs_ioctl_snap_create_transid.
Commit e7848683 however tried to move all calls to mnt_want_write above
i_mutex. So somewhere while merging this, it got mixed up. The
solution is to remove the mnt_want_write call completely from
mksubvol.
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

It is not currently possible to build the gpmi-nand driver without
also building the mxs-dma driver. Clarify this Kconfig and enable
both in the defconfig file so we can build it again with both enabled.

drivers/built-in.o: In function `gpmi_dma_filter':
clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>

Without this patch, building integrator_defconfig results in:

arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default]
arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>

The samsung PWM driver has moved to the new PWM subsystem, which
changed the Kconfig symbol for that driver, but the rx1950 and
gta02 boards still uses the old one.

Without this patch, building s3c2410_defconfig results in:

arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_lcd_power':
arch/arm/mach-s3c24xx/mach-rx1950.c:430: undefined reference to `pwm_config'
arch/arm/mach-s3c24xx/mach-rx1950.c:431: undefined reference to `pwm_disable'
arch/arm/mach-s3c24xx/mach-rx1950.c:437: undefined reference to `pwm_config'
arch/arm/mach-s3c24xx/mach-rx1950.c:438: undefined reference to `pwm_enable'
arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_exit':
arch/arm/mach-s3c24xx/mach-rx1950.c:504: undefined reference to `pwm_free'
arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_init':
arch/arm/mach-s3c24xx/mach-rx1950.c:487: undefined reference to `pwm_request'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>

The sa1100 definition of the io_p2v macro has changed in v3.6, and this one
file stopped working because of that.

Without this patch, building hackkit_defconfig results in:

arch/arm/mach-sa1100/leds-hackkit.c: In function 'hackkit_leds_event':
arch/arm/mach-sa1100/leds-hackkit.c:39:4: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>

The EETI touchscreen asserts its IRQ line as soon as it has data in its
internal buffers. The line is automatically deasserted once all data has
been read via I2C. Hence, the driver has to monitor the GPIO line and
cannot simply rely on the interrupt handler reception.

In the current implementation of the driver, irq_to_gpio() is used to
determine the GPIO number from the i2c_client's IRQ value.

As irq_to_gpio() is not available on all platforms, this patch changes
this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
added to the platform_data struct and gpio_to_irq is used to derive the
IRQ from that GPIO. If this fails, bail out. The driver is only able to
work in environments where the touchscreen GPIO can be mapped to an
IRQ.

Without this patch, building raumfeld_defconfig results in:

drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org (v3.2+)
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: linux-input@vger.kernel.org
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>

The irq_to_gpio function was removed from the pxa platform
in linux-3.2, and this driver has been broken since.

There is actually no in-tree user of this driver that adds
this platform device, but the driver can and does get enabled
on some platforms.

Without this patch, building ezx_defconfig results in:

drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work':
drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: stable@vger.kernel.org (v3.2+)
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Daniel Ribeiro <drwyrm@gmail.com>

Commit 3d55c29f "ARM: tegra: harmony: add regulator supply name and its
input supply" was supposed to fix all the problems with regulators on
Harmony. However, it appears that I only tested it when booting using
board files, not when booting using device tree. This change fixes two
problems with regulators when booting using device tree:

1) That patch only created the vdd_sys regulator when booting using a
   board file. Since this is the root of the whole regulator tree, this
   caused no regulators to successfully initialize when booting using
   device tree. The registration of vdd_sys is moved to fix this.

2) When booting use DT, the regulator core sets has_full_constraints,
   which in turn causes the core to turn off any regulators not marked
   as always on. Some of the affected regulators are required for basic
   system operation. To solve this, add always on constraints to all
   relevant regulators. This doesn't affect booting using a board file
   since nothing sets has_full_constraints in that case.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Commit e9da6e99 (ARM: dma-mapping:
remove custom consistent dma region) changed the way atomic allocations
are handled. However, arm_dma_free() was not modified accordingly, and
as a result freeing of atomic allocations does not work correctly when
CMA is disabled. Memory is leaked and following WARNINGs are seen:

[   57.698911] ------------[ cut here ]------------
[   57.753518] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4()
[   57.811473] trying to free invalid coherent area: e0848000
[   57.867398] Modules linked in: sata_mv(-)
[   57.921373] [<c000d270>] (unwind_backtrace+0x0/0xf0) from [<c0015430>] (warn_slowpath_common+0x50/0x68)
[   58.033924] [<c0015430>] (warn_slowpath_common+0x50/0x68) from [<c00154dc>] (warn_slowpath_fmt+0x30/0x40)
[   58.152024] [<c00154dc>] (warn_slowpath_fmt+0x30/0x40) from [<c000dc18>] (arm_dma_free+0x88/0xe4)
[   58.219592] [<c000dc18>] (arm_dma_free+0x88/0xe4) from [<c008fa30>] (dma_pool_destroy+0x100/0x148)
[   58.345526] [<c008fa30>] (dma_pool_destroy+0x100/0x148) from [<c019a64c>] (release_nodes+0x144/0x218)
[   58.475782] [<c019a64c>] (release_nodes+0x144/0x218) from [<c0197e10>] (__device_release_driver+0x60/0xb8)
[   58.614260] [<c0197e10>] (__device_release_driver+0x60/0xb8) from [<c0198608>] (driver_detach+0xd8/0xec)
[   58.756527] [<c0198608>] (driver_detach+0xd8/0xec) from [<c0197c54>] (bus_remove_driver+0x7c/0xc4)
[   58.901648] [<c0197c54>] (bus_remove_driver+0x7c/0xc4) from [<c004bfac>] (sys_delete_module+0x19c/0x220)
[   59.051447] [<c004bfac>] (sys_delete_module+0x19c/0x220) from [<c0009140>] (ret_fast_syscall+0x0/0x2c)
[   59.207996] ---[ end trace 0745420412c0325a ]---
[   59.287110] ------------[ cut here ]------------
[   59.366324] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4()
[   59.450511] trying to free invalid coherent area: e0847000
[   59.534357] Modules linked in: sata_mv(-)
[   59.616785] [<c000d270>] (unwind_backtrace+0x0/0xf0) from [<c0015430>] (warn_slowpath_common+0x50/0x68)
[   59.790030] [<c0015430>] (warn_slowpath_common+0x50/0x68) from [<c00154dc>] (warn_slowpath_fmt+0x30/0x40)
[   59.972322] [<c00154dc>] (warn_slowpath_fmt+0x30/0x40) from [<c000dc18>] (arm_dma_free+0x88/0xe4)
[   60.070701] [<c000dc18>] (arm_dma_free+0x88/0xe4) from [<c008fa30>] (dma_pool_destroy+0x100/0x148)
[   60.256817] [<c008fa30>] (dma_pool_destroy+0x100/0x148) from [<c019a64c>] (release_nodes+0x144/0x218)
[   60.445201] [<c019a64c>] (release_nodes+0x144/0x218) from [<c0197e10>] (__device_release_driver+0x60/0xb8)
[   60.634148] [<c0197e10>] (__device_release_driver+0x60/0xb8) from [<c0198608>] (driver_detach+0xd8/0xec)
[   60.823623] [<c0198608>] (driver_detach+0xd8/0xec) from [<c0197c54>] (bus_remove_driver+0x7c/0xc4)
[   61.013268] [<c0197c54>] (bus_remove_driver+0x7c/0xc4) from [<c004bfac>] (sys_delete_module+0x19c/0x220)
[   61.203472] [<c004bfac>] (sys_delete_module+0x19c/0x220) from [<c0009140>] (ret_fast_syscall+0x0/0x2c)
[   61.393390] ---[ end trace 0745420412c0325b ]---

The patch fixes this.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

The alignment mask is calculated incorrectly. Fixing the calculation
makes strange hangs/lockups disappear during the boot with Amstrad E3
and 3.6-rc1 kernel.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Fix dma_contiguous_remap() so that it continues through all the
regions, even after encountering one that is outside lowmem.
Without this change, if you have two CMA regions, the first outside
lowmem and the seocnd inside lowmem, only the second one will get
set up in the MMU. Data written to that region then doesn't get
automatically flushed from the cache into memory.
Signed-off-by: Chris Brand <cbrand@broadcom.com>
[extended patch subject with 'fix' word]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Commit c2e935a7 "USB: move transceiver from ehci_hcd and ohci_hcd to
hcd and rename it as phy" removed the last use of the "ohci" variable
in the usb_hcd_omap_remove function, but left the variable in place
unused.

Without this patch, building omap1_defconfig results in:

In file included from drivers/usb/host/ohci-hcd.c:1013:0:
drivers/usb/host/ohci-omap.c: In function 'usb_hcd_omap_remove':
drivers/usb/host/ohci-omap.c:406:19: warning: unused variable 'ohci' [-Wunused-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Zhao <richard.zhao@freescale.com>

In commit 4f304245 "mfd: Set asic3 DS1WM clock_rate", a possible
path through asic3_mfd_probe was introduced that would lead to
an unpredictable return value, if everything succeeds but there
are pdata->leds is NULL. This was reported correctly by gcc.

Without this patch, building magician_defconfig results in:

drivers/mfd/asic3.c: In function 'asic3_mfd_probe':
drivers/mfd/asic3.c:940:2: warning: 'ret' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Parsons <lost.distance@yahoo.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>

Revert commit 45226e94 (NMI watchdog: fix for lockup detector breakage
on resume) which breaks resume from system suspend on my SH7372
Mackerel board (by causing a NULL pointer dereference to happen) and
is generally wrong, because it abuses the CPU hotplug functionality
in a shamelessly blatant way.

The original issue should be addressed through appropriate syscore
resume callback instead.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Commits 1d5fcfec (PM / Domains: Add device domain data reference
counter) and 62d44902 (PM / Domains: Allow device callbacks to be
added at any time) added checks for the return value of
dev_pm_get_subsys_data(), but those checks were incorrect, because
that function returned 1 on success in some cases.

Since all of the existing users of dev_pm_get_subsys_data() don't use
the positive value returned by it on success, change its definition
so that it always returns 0 when successful.
Reported-by: Heiko Stübner <heiko@sntech.de>
Reported-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Convert a 0 error return code to a negative one, as returned elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

If an RTC alarm fires just as suspend is happening, it is possible for
suspend to complete and the alarm to be missed.

To avoid the race, we must register the event with the PM core.

As the event is made visible to userspace through a thread which is
only scheduled by the interrupt, we need a pm_stay_awake/pm_relax
pair preventing suspend from the interrupt until the thread completes
its work.

This makes the pm_wakeup_event() call in cmos_interrupt unnecessary as
it provides suspend protection for all RTCs that use rtc_update_irq.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Pull networking fixes from David Miller:

 1) Missed rcu_assign_pointer() in mac80211 scanning, from Johannes
    Berg.

 2) Allow devices to limit the number of segments that an individual
    TCP TSO packet can use at a time, to deal with device and/or driver
    specific limitations.  From Ben Hutchings.

 3) Fix unexpected hard IPSEC expiration after setting the date.  From
    Fan Du.

 4) Memory leak fix in bxn2x driver, from Jesper Juhl.

 5) Fix two memory leaks in libertas driver, from Daniel Drake.

 6) Fix deref of out-of-range array index in packet scheduler generic
    actions layer.  From Hiroaki SHIMODA.

 7) Fix TX flow control errors in mlx4 driver, from Yevgeny Petrilin.

 8) Fix CRIS eth_v10.c driver build, from Randy Dunlap.

 9) Fix wrong SKB freeing in LLC protocol layer, from Sorin Dumitru.

10) The IP output path checks neigh lookup errors incorrectly, it needs
    to use IS_ERR().  From Vasiliy Kulikov.

11) An estimator leak leads to deref of freed memory in timer handler,
    fix from Hiroaki SHIMODA.

12) TCP early demux in ipv6 needs to use DST cookies in order to
    validate the RX route properly.  Fix from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  net: ipv6: fix TCP early demux
  net: Use PTR_RET rather than if(IS_ERR(.. [1]
  net_sched: act: Delete estimator in error path.
  ip: fix error handling in ip_finish_output2()
  llc: free the right skb
  ixp4xx_eth: fix ptp_ixp46x build failure
  drivers/atm/iphase.c: fix error return code
  tcp_output: fix sparse warning for tcp_wfree
  drivers/net/phy/mdio-mux-gpio.c: drop devm_kfree of devm_kzalloc'd data
  batman-adv: select an internet gateway if none was chosen
  mISDN: Bugfix for layer2 fixed TEI mode
  igb: don't break user visible strings over multiple lines in igb_ethtool.c
  igb: correct hardware type (i210/i211) check in igb_loopback_test()
  igb: Fix for failure to init on some 82576 devices.
  cris: fix eth_v10.c build error
  cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN
  isdnloop: fix and simplify isdnloop_init()
  hyperv: Move wait completion msg code into rndis_filter_halt_device()
  net/mlx4_core: Remove port type restrictions
  net/mlx4_en: Fixing TX queue stop/wake flow
  ...

Merge tag 'pinctrl-fixes-for-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 - Move MXS pinctrl registration to poscore_initcall
 - Fix up various devm_* managed resources code paths
 - Fix one function group in the Nomadik driver
 - Update MAINTAINERS

* tag 'pinctrl-fixes-for-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  drivers/pinctrl/pinctrl-nomadik.c: drop devm_kfree of devm_kzalloc'd data
  MAINTAINERS: fix a few pinctrl related entries
  pinctrl-sirf: remove devm_kfree at error path
  pinctrl/nomadik: fix hsi function group list
  pinctrl/pinctrl-u300: remove unneeded devm_kfree call
  pinctrl: mxs: register driver at postcore_initcall time

Pull IOMMU fixes from Joerg Roedel:
 "These patches fix a couple of issues.  First of all a few problems
  with ACS on x86 introduced in the last merge window, where ACS did not
  work on AMD and a NULL pointer dereference when there ran against
  SR-IOV devices.

  The patches fallen out of coccinelle checks fix a possible invalid
  memory reference and a possible memory leak.  The other patches mostly
  fix build errors and warnings and a wrong return value."

* tag 'iommu-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix ACS path checking
  iommu/intel: Fix ACS path checking
  iommu/amd: Fix pci_request_acs() call-place
  iommu/exynos: Fix build error
  iommu/tegra: smmu: Fix error initial value at domain_init
  iommu/tegra: smmu: Cleanup with lesser nest
  iommu: Add missing forward declaration in include file
  iommu: Include linux/types.h
  iommu/intel: add missing free_domain_mem
  iommu/tegra: remove invalid reference to list iterator variable

Pull sound fixes from Takashi Iwai:
 "Containing only a few really small/trivial fixes.  The only urgent fix
  is a regression fix of HDMI codec probing, introduced in 3.6-rc1.  The
  rest are HD-audio specific fixes and a copule of minor bug fixes in
  PCM core and the old emu10k1."

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad
  ALSA: hda - Fix ugly debug prints with CONFIG_SND_VERBOSE_PRINTK=y
  ALSA: hda - remove redundant auto quirks for conexant 506x
  ALSA: hda - remove quirk for Dell Vostro 1015
  ALSA: hda - add dock support for Thinkpad X230
  ALSA: hda - Fix regression of HDMI codec probing
  ALSA: hda - add dock support for Thinkpad T430s
  ALSA: emu10k1: Avoid access to invalid pages when period=1
  ALSA: PCM: Fix possible memory leaks in the error path

The same ID is twice in the quirk table, so the second one is not used.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When CONFIG_SND_VERBOSE_PRINTK=y is set, the debug print in
hda_auto_parser.c looks really ugly like:

  ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
  ALSA sound/pci/hda/hda_auto_parser.c:334    dig-out=0x12/0x0
  ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
  ALSA sound/pci/hda/hda_auto_parser.c:339  Mic=0x11ALSA sound/pci/hda/hda_auto_parser.c:339  Line=0x10
  ALSA sound/pci/hda/hda_auto_parser.c:341
  ALSA sound/pci/hda/hda_auto_parser.c:343    dig-in=0x13

Better to put one item at each line.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

devm_kfree should not have to be explicitly used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,d;
@@

x = devm_kzalloc(...)
...
?-devm_kfree(d,x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>