- 14 May, 2020 24 commits
-
-
Steven Rostedt (VMware) authored
commit 11f5efc3 upstream. x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu areas can be complex, to say the least. Mappings may happen at boot up, and if nothing synchronizes the page tables, those page mappings may not be synced till they are used. This causes issues for anything that might touch one of those mappings in the path of the page fault handler. When one of those unmapped mappings is touched in the page fault handler, it will cause another page fault, which in turn will cause a page fault, and leave us in a loop of page faults. Commit 763802b5 ("x86/mm: split vmalloc_sync_all()") split vmalloc_sync_all() into vmalloc_sync_unmappings() and vmalloc_sync_mappings(), as on system exit, it did not need to do a full sync on x86_64 (although it still needed to be done on x86_32). By chance, the vmalloc_sync_all() would synchronize the page mappings done at boot up and prevent the per cpu area from being a problem for tracing in the page fault handler. But when that synchronization in the exit of a task became a nop, it caused the problem to appear. Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home Cc: stable@vger.kernel.org Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Reported-by:
"Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Suggested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit e9b3c610 upstream. We must not process packets shorter than a packet ID Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-and-tested-by: syzbot+d29e9263e13ce0b9f4fd@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 9f04db23 upstream. This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by:
Julian Groß <julian.g@posteo.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.comSigned-off-by:
-
Alan Stern authored
commit 0ed08fad upstream. The syzbot fuzzer discovered a bad race between in the usbhid driver between usbhid_stop() and usbhid_close(). In particular, usbhid_stop() does: usb_free_urb(usbhid->urbin); ... usbhid->urbin = NULL; /* don't mess up next start */ and usbhid_close() does: usb_kill_urb(usbhid->urbin); with no mutual exclusion. If the two routines happen to run concurrently so that usb_kill_urb() is called in between the usb_free_urb() and the NULL assignment, it will access the deallocated urb structure -- a use-after-free bug. This patch adds a mutex to the usbhid private structure and uses it to enforce mutual exclusion of the usbhid_start(), usbhid_stop(), usbhid_open() and usbhid_close() callbacks. Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jere Leppänen authored
commit 145cb2f7 upstream. When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them at the same time and in the correct order. This bundling was broken by commit 4ff40b86 ("sctp: set chunk transport correctly when it's a new asoc"), which assigns a transport for the COOKIE-ACK, but not for the SHUTDOWN. Fix this by passing a reference to the COOKIE-ACK chunk as an argument to sctp_sf_do_9_2_start_shutdown() and onward to sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same transport as the COOKIE-ACK chunk, which allows them to be bundled. In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was previously unused. Now that we're taking it into use, it must be a valid pointer to a chunk, or NULL. There is only one call site where it's not, in sctp_sf_autoclose_timer_expire(). Fix that too. Fixes: 4ff40b86 ("sctp: set chunk transport correctly when it's a new asoc") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jason Gerecke authored
commit 778fbf41 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: https://github.com/linuxwacom/input-wacom/issues/155 Fixes: 184eccd4 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 9274124f ] Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit c71c4e49 ] Fix the logic that sets the enable/disable flag for the source MAC filter according to firmware spec 1.7.1. In the original firmware spec. before 1.7.1, the VF spoof check flags were not latched after making the HWRM_FUNC_CFG call, so there was a need to keep the func_flags so that subsequent calls would perserve the VF spoof check setting. A change was made in the 1.7.1 spec so that the flags became latched. So we now set or clear the anti- spoof setting directly without retrieving the old settings in the stored vf->func_flags which are no longer valid. We also remove the unneeded vf->func_flags. Fixes: 8eb992e8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit bae361c5 ] Improve the slot reset sequence by disabling the device to prevent bad DMAs if slot reset fails. Return the proper result instead of always PCI_ERS_RESULT_RECOVERED to the caller. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit cece6f43 ] Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit f3cb3ceb ] mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
-
Michael Chan authored
[ Upstream commit c72cb303 ] The current logic in bnxt_fix_features() will inadvertently turn on both CTAG and STAG VLAN offload if the user tries to disable both. Fix it by checking that the user is trying to enable CTAG or STAG before enabling both. The logic is supposed to enable or disable both CTAG and STAG together. Fixes: 5a9f6b23 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.") Signed-off-by:
-
Tuong Lien authored
[ Upstream commit 980d6927 ] When an application connects to the TIPC topology server and subscribes to some services, a new connection is created along with some objects - 'tipc_subscription' to store related data correspondingly... However, there is one omission in the connection handling that when the connection or application is orderly shutdown (e.g. via SIGQUIT, etc.), the connection is not closed in kernel, the 'tipc_subscription' objects are not freed too. This results in: - The maximum number of subscriptions (65535) will be reached soon, new subscriptions will be rejected; - TIPC module cannot be removed (unless the objects are somehow forced to release first); The commit fixes the issue by closing the connection if the 'recvmsg()' returns '0' i.e. when the peer is shutdown gracefully. It also includes the other unexpected cases. Acked-by:
Jon Maloy <jmaloy@redhat.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit df4953e4 ] syzbot managed to set up sfq so that q->scaled_quantum was zero, triggering an infinite loop in sfq_dequeue() More generally, we must only accept quantum between 1 and 2^18 - 7, meaning scaled_quantum must be in [1, 0x7FFF] range. Otherwise, we also could have a loop in sfq_dequeue() if scaled_quantum happens to be 0x8000, since slot->allot could indefinitely switch between 0 and 0x8000. Fixes: eeaeb068 ("sch_sfq: allow big packets and be fair") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+0251e883fe39e7a0cb0a@syzkaller.appspotmail.com Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8738c85c ] If choke_init() could not allocate q->tab, we would crash later in choke_reset(). BUG: KASAN: null-ptr-deref in memset include/linux/string.h:366 [inline] BUG: KASAN: null-ptr-deref in choke_reset+0x208/0x340 net/sched/sch_choke.c:326 Write of size 8 at addr 0000000000000000 by task syz-executor822/7022 CPU: 1 PID: 7022 Comm: syz-executor822 Not tainted 5.7.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 __kasan_report.cold+0x5/0x4d mm/kasan/report.c:515 kasan_report+0x33/0x50 mm/kasan/common.c:625 check_memory_region_inline mm/kasan/generic.c:187 [inline] check_memory_region+0x141/0x190 mm/kasan/generic.c:193 memset+0x20/0x40 mm/kasan/common.c:85 memset include/linux/string.h:366 [inline] choke_reset+0x208/0x340 net/sched/sch_choke.c:326 qdisc_reset+0x6b/0x520 net/sched/sch_generic.c:910 dev_deactivate_queue.constprop.0+0x13c/0x240 net/sched/sch_generic.c:1138 netdev_for_each_tx_queue include/linux/netdevice.h:2197 [inline] dev_deactivate_many+0xe2/0xba0 net/sched/sch_generic.c:1195 dev_deactivate+0xf8/0x1c0 net/sched/sch_generic.c:1233 qdisc_graft+0xd25/0x1120 net/sched/sch_api.c:1051 tc_modify_qdisc+0xbab/0x1a00 net/sched/sch_api.c:1670 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5454 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 Fixes: 77e62da6 ("sch_choke: drop all packets in queue during reset") Signed-off-by:
-
Matt Jolly authored
[ Upstream commit 57c7f2bd ] Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2761121a ] Do not assume the attribute has the right size. Fixes: aea5f654 ("net/sched: add skbprio scheduler") Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 40e47307 ] When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6 ("net/mlx4_core: Allocate default counter per port") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Scott Dial authored
[ Upstream commit ab046a5d ] MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa8, and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by:
Scott Dial <scott@scottdial.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 14695212 ] My intent was to not let users set a zero drop_batch_size, it seems I once again messed with min()/max(). Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit 86530837 ] In this code, it appears that phyter_clocks is a list head, based on the previous list_for_each, and that clock->list is intended to be a list element, given that it has just been initialized in dp83640_clock_init. Accordingly, switch the arguments to list_add_tail, which takes the list head as the second argument. Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Nicolas Pitre authored
[ Upstream commit 57d38f26 ] By directly using kfree() in different places we risk missing one if it is switched to using vfree(), especially if the corresponding vmalloc() is hidden away within a common abstraction. Oh wait, that's exactly what happened here. So let's fix this by creating a common abstraction for the free case as well. Signed-off-by:
Nicolas Pitre <nico@fluxnic.net> Reported-by: syzbot+0bfda3ade1ee9288a1be@syzkaller.appspotmail.com Fixes: 9a98e7a8 ("vt: don't use kmalloc() for the unicode screen buffer") Cc: <stable@vger.kernel.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2005021043110.2671@knanqh.ubzrSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Masami Hiramatsu authored
[ Upstream commit dcbd21c9 ] Fix a typo that resulted in an unnecessary double initialization to addr. Link: http://lkml.kernel.org/r/158779374968.6082.2337484008464939919.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: c7411a1a ("tracing/kprobe: Check whether the non-suffixed symbol is notrace") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Matt Jolly authored
commit 78d6de3c upstream. Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by:
-
- 10 May, 2020 16 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Vetter authored
commit 26b1d3b5 upstream. The -modesetting ddx has a totally broken idea of how atomic works: - doesn't disable old connectors, assuming they get auto-disable like with the legacy setcrtc - assumes ASYNC_FLIP is wired through for the atomic ioctl - not a single call to TEST_ONLY Iow the implementation is a 1:1 translation of legacy ioctls to atomic, which is a) broken b) pointless. We already have bugs in both i915 and amdgpu-DC where this prevents us from enabling neat features. If anyone ever cares about atomic in X we can easily add a new atomic level (req->value == 2) for X to get back the shiny toys. Since these broken versions of -modesetting have been shipping, there's really no other way to get out of this bind. v2: - add an informational dmesg output (Rob, Ajax) - reorder after the DRIVER_ATOMIC check to avoid useless noise (Ilia) - allow req->value > 2 so that X can do another attempt at atomic in the future v3: Go with paranoid, insist that the X should be first (suggested by Rob) Cc: Ilia Mirkin <imirkin@alum.mit.edu> References: https://gitlab.freedesktop.org/xorg/xserver/issues/629 References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/180 References: abbc0697 ("drm/fb: revert the i915 Actually configure untiled displays from master") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1) Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1) Cc: Michel Dänzer <michel@daenzer.net> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Acked-by:
Adam Jackson <ajax@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Acked-by:
Rob Clark <robdclark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905185318.31363-1-daniel.vetter@ffwll.ch Cc: Yves-Alexis Perez <corsac@debian.org> Signed-off-by:
-
Jiri Slaby authored
commit 526f3d96 upstream. Commit 018d26fc ("cgroup, netclassid: periodically release file_lock on classid") added a second cond_resched to write_classid indirectly by update_classid_task. Remove the one in write_classid. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Dmitry Yakunin <zeil@yandex-team.ru> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Thomas Pedersen authored
commit 30b2f0be upstream. commit 08a5bdde ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED") Fixed a bug where we failed to take into account a nullfunc frame can be either non-QoS or QoS. It turns out there is at least one more bug in ieee80211_sta_tx_notify(), introduced in commit 7b6ddeaf ("mac80211: use QoS NDP for AP probing"), where we forgot to check for the QoS variant and so assumed the QoS nullfunc frame never went out Fix this by adding a helper ieee80211_is_any_nullfunc() which consolidates the check for non-QoS and QoS nullfunc frames. Replace existing compound conditionals and add a couple more missing checks for QoS variant. Signed-off-by:
Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200114055940.18502-3-thomas@adapt-ip.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Hans de Goede authored
commit 1d6f8c5b upstream. Commit 1f27dbd8 ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") changed the module-param sanity check to accept temperature limits between 20 and 90 degrees celcius. But the error message printed when the module params are outside this range was not updated. This commit updates the error message to match the new min and max value for the temp-limits. Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 977dfef4 upstream. The commit 3c6fd1f0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. Since the empty codec problem appear on the certain AMD platform (PCI ID 1022:1487), this patch changes the blacklist matching to both PCI ID and SSID using pci_match_id(). Also, the entry that was removed by the previous fix for ASUS ROG Zenigh II is re-added. Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nick Desaulniers authored
commit 7312b706 upstream. Similar to commit 38e45d81 ("sparc64: implement ioremap_uc") define ioremap_uc for hexagon to avoid errors from -Wimplicit-function-definition. Link: http://lkml.kernel.org/r/20191209222956.239798-2-ndesaulniers@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/797 Fixes: e537654b ("lib: devres: add a helper function for ioremap_uc") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Brian Cain <bcain@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Tuowen Zhao <ztuowen@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Will Deacon <will@kernel.org> Cc: Richard Fontana <rfontana@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Christoph Hellwig authored
commit ac32292c upstream. Use ioremap as the main implemented function, and defined ioremap_nocache to it as a deprecated alias. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tuowen Zhao authored
commit a8ff78f7 upstream. Some BIOS erroneously specifies write-combining BAR for intel-lpss-pci in MTRR. This will cause the system to hang during boot. If possible, this bug could be corrected with a firmware update. This patch use devm_ioremap_uc to overwrite/ignore the MTRR settings by forcing the use of strongly uncachable pages for intel-lpss. The BIOS bug is present on Dell XPS 13 7390 2-in-1: [ 0.001734] 5 base 4000000000 mask 6000000000 write-combining 4000000000-7fffffffff : PCI Bus 0000:00 4000000000-400fffffff : 0000:00:02.0 (i915) 4010000000-4010000fff : 0000:00:15.0 (intel-lpss-pci) Link: https://bugzilla.kernel.org/show_bug.cgi?id=203485 Cc: <stable@vger.kernel.org> # v4.19+ Tested-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Tuowen Zhao <ztuowen@gmail.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Roman Gilg <subdiff@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Tuowen Zhao authored
[ Upstream commit e537654b ] Implement a resource managed strongly uncachable ioremap function. Cc: <stable@vger.kernel.org> # v4.19+ Tested-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Aaron Ma authored
commit 5932d260 upstream. On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jere Leppänen authored
commit 12dfd78e upstream. When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52 ("sctp: handle association restarts when the socket is closed.") Signed-off-by:
-
Doug Berger authored
[ Upstream commit 3554e54a ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit ecaeceb8 ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 5990cdee ] 0day reports over and over on an powerpc randconfig with clang: lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions Remove the superfluous casts, which have been done previously for x86 and arm32 in commit dea632ca ("lib/mpi: fix build with clang") and commit 7b7c1df2 ("lib/mpi/longlong.h: fix building with 32-bit x86"). Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/991 Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.comSigned-off-by:
-
Jeremie Francois (on alpha) authored
[ Upstream commit e461bc9f ] Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by:
Jeremie Francois (on alpha) <jeremie.francois@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
