cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.

This also fixes a use-after-free bug on cgroupns reported in

 https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com

Note that backporting this fix also requires the preceding patch.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Fixes: 5136f636 ("cgroup: implement "nsdelegate" mount option")
Signed-off-by: Tejun Heo <tj@kernel.org>

of->priv is currently used by each interface file implementation to store
private information. This patch collects the current two private data usages
into struct cgroup_file_ctx which is allocated and freed by the common path.
This allows generic private data which applies to multiple files, which will
be used to in the following patch.

Note that cgroup_procs iterator is now embedded as procs.iter in the new
cgroup_file_ctx so that it doesn't need to be allocated and freed
separately.

v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in
    cgroup_file_ctx as suggested by Linus.

v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too.
    Converted. Didn't change to embedded allocation as cgroup1 pidlists get
    stored for caching.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's credentials which is a
potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes both cgroup2 and cgroup1 process migration interfaces to
use the credentials saved at the time of open (file->f_cred) instead of
current's.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 187fe840 ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy")
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull networking fixes from Jakub Kicinski"
 "Networking fixes, including fixes from bpf, and WiFi. One last pull
  request, turns out some of the recent fixes did more harm than good.

  Current release - regressions:

   - Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
     problem worse

   - Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
     __fixed_phy_register", broke EPROBE_DEFER handling

   - Revert "net: usb: r8152: Add MAC pass-through support for more
     Lenovo Docks", broke setups without a Lenovo dock

  Current release - new code bugs:

   - selftests: set amt.sh executable

  Previous releases - regressions:

   - batman-adv: mcast: don't send link-local multicast to mcast routers

  Previous releases - always broken:

   - ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY

   - sctp: hold endpoint before calling cb in
     sctp_transport_lookup_process

   - mac80211: mesh: embed mesh_paths and mpp_paths into
     ieee80211_if_mesh to avoid complicated handling of sub-object
     allocation failures

   - seg6: fix traceroute in the presence of SRv6

   - tipc: fix a kernel-infoleak in __tipc_sendmsg()"

* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  selftests: set amt.sh executable
  Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
  sfc: The RX page_ring is optional
  iavf: Fix limit of total number of queues to active queues of VF
  i40e: Fix incorrect netdev's real number of RX/TX queues
  i40e: Fix for displaying message regarding NVM version
  i40e: fix use-after-free in i40e_sync_filters_subtask()
  i40e: Fix to not show opcode msg on unsuccessful VF MAC change
  ieee802154: atusb: fix uninit value in atusb_set_extended_addr
  mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
  mac80211: initialize variable have_higher_than_11mbit
  sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
  netrom: fix copying in user data in nr_setsockopt
  udp6: Use Segment Routing Header for dest address if present
  icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
  seg6: export get_srh() for ICMP handling
  Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
  ipv6: Do cleanup if attribute validation fails in multipath route
  ipv6: Continue processing multipath route even if gateway attribute is invalid
  net/fsl: Remove leftover definition in xgmac_mdio
  ...

amt.sh test script will not work because it doesn't have execution
permission. So, it adds execution permission.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: c08e8bae ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit f77b83b5.

This change breaks multiple usb to ethernet dongles attached on Lenovo
USB hub.

Fixes: f77b83b5 ("net: usb: r8152: Add MAC passthrough support for more Lenovo Docks")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://lore.kernel.org/r/20220105155102.8557-1-aaron.ma@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull gpio fixes from Bartosz Golaszewski:
 "Here are two last fixes for this release cycle from the GPIO
  subsystem:

   - fix irq offset calculation in gpio-aspeed-sgpio

   - update the MAINTAINERS entry for gpio-brcmstb"

* tag 'gpio-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: update gpio-brcmstb maintainers
  gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler

Merge tag 'ieee802154-for-net-2022-01-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2022-01-05

Below I have a last minute fix for the atusb driver.

Pavel fixes a KASAN uninit report for the driver. This version is the
minimal impact fix to ease backporting. A bigger rework of the driver to
avoid potential similar problems is ongoing and will come through net-next
when ready.

* tag 'ieee802154-for-net-2022-01-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
  ieee802154: atusb: fix uninit value in atusb_set_extended_addr
====================

Link: https://lore.kernel.org/r/20220105153914.512305-1-stefan@datenfreihafen.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-01-04

This series contains updates to i40e and iavf drivers.

Mateusz adjusts displaying of failed VF MAC message when the failure is
expected as well as modifying an NVM info message to not confuse the user
for i40e.

Di Zhu fixes a use-after-free issue MAC filters for i40e.

Jedrzej fixes an issue with misreporting of Rx and Tx queues during
reinitialization for i40e.

Karen correct checking of channel queue configuration to occur against
active queues for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.

Fixes: 2768935a ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.

Fixes: d5b33d02 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.

Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.

Fixes: 4fb29bdd ("i40e: The driver now prints the API version in error message")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.

 print_address_description+0x70/0x360
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x1b2/0x330
 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
 i40e_sync_filters_subtask+0xe3/0x130 [i40e]
 i40e_service_task+0x195/0x24c0 [i40e]
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 ? process_one_work+0x7d0/0x7d0
 kthread+0x1c3/0x1f0
 ? kthread_park+0xc0/0xc0
 ret_from_fork+0x35/0x40

Allocated by task 2279810:
 kasan_kmalloc+0xa0/0xd0
 kmem_cache_alloc_trace+0xf3/0x1e0
 i40e_add_filter+0x127/0x2b0 [i40e]
 i40e_add_mac_filter+0x156/0x190 [i40e]
 i40e_addr_sync+0x2d/0x40 [i40e]
 __hw_addr_sync_dev+0x154/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_add+0x6c/0x90
 igmp6_group_added+0x214/0x230
 __ipv6_dev_mc_inc+0x338/0x4f0
 addrconf_join_solict.part.7+0xa2/0xd0
 addrconf_dad_work+0x500/0x980
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 kthread+0x1c3/0x1f0
 ret_from_fork+0x35/0x40

Freed by task 2547073:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1b0
 __i40e_del_filter+0xa3/0xf0 [i40e]
 i40e_del_mac_filter+0xf3/0x130 [i40e]
 i40e_addr_unsync+0x85/0xa0 [i40e]
 __hw_addr_sync_dev+0x9d/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_del+0x69/0x80
 igmp6_group_dropped+0x279/0x510
 __ipv6_dev_mc_dec+0x174/0x220
 addrconf_leave_solict.part.8+0xa2/0xd0
 __ipv6_ifa_notify+0x4cd/0x570
 ipv6_ifa_notify+0x58/0x80
 ipv6_del_addr+0x259/0x4a0
 inet6_addr_del+0x188/0x260
 addrconf_del_ifaddr+0xcc/0x130
 inet6_ioctl+0x152/0x190
 sock_do_ioctl+0xd8/0x2b0
 sock_ioctl+0x2e5/0x4c0
 do_vfs_ioctl+0x14e/0xa80
 ksys_ioctl+0x7c/0xa0
 __x64_sys_ioctl+0x42/0x50
 do_syscall_64+0x98/0x2c0
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Signed-off-by: Rui Zhang <zhangrui182@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.

This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.

Previously it was not possible to send response with some error code
to VF without displaying opcode information.

Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.comSigned-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

Merge tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Two more changes:
 - mac80211: initialize a variable to avoid using it uninitialized
 - mac80211 mesh: put some data structures into the container to
   fix bugs with and not have to deal with allocation failures

* tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
  mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
  mac80211: initialize variable have_higher_than_11mbit
====================

Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was
in mesh_paths and mpp_paths being NULL.

mesh_pathtbl_init() could fail in case of memory allocation failure, but
nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to
leaving 2 pointers as NULL. Syzbot has found null deref on exit path,
but it could happen anywhere else, because code assumes these pointers are
valid.

Since all ieee80211_*_setup_sdata functions are void and do not fail,
let's embedd mesh_paths and mpp_paths into parent struct to avoid
adding error handling on higher levels and follow the pattern of others
setup_sdata functions

Fixes: 60854fd9 ("mac80211: mesh: convert path table to rhashtable")
Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Clang static analysis reports this warnings

mlme.c:5332:7: warning: Branch condition evaluates to a
  garbage value
    have_higher_than_11mbit)
    ^~~~~~~~~~~~~~~~~~~~~~~

have_higher_than_11mbit is only set to true some of the time in
ieee80211_get_rates() but is checked all of the time.  So
have_higher_than_11mbit needs to be initialized to false.

Fixes: 5d6a1b06 ("mac80211: set basic rates earlier")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

tx_queue_len can be set to ~0U, we need to be more
careful about overflows.

__fls(0) is undefined, as this report shows:

UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent 51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:151 [inline]
 __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmsg+0x280/0x370 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.

Fixes: a7b75c5a ("net: pass a sockptr_t into ->setsockopt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Fix traceroute in the presence of SRv6

When using SRv6 the destination IP address in the IPv6 header is not
always the true destination, it can be a router along the path that
SRv6 is using.

When ICMP reports an error, e.g, time exceeded, which is what
traceroute uses, it included the packet which invoked the error into
the ICMP message body. Upon receiving such an ICMP packet, the
invoking packet is examined and an attempt is made to find the socket
which sent the packet, so the error can be reported. Lookup is
performed using the source and destination address. If the
intermediary router IP address from the IP header is used, the lookup
fails. It is necessary to dig into the header and find the true
destination address in the Segment Router header, SRH.

v2:
Play games with the skb->network_header rather than clone the skb
v3:
Move helpers into seg6.c
v4:
Move short helper into header file.
Rework getting SRH destination address
v5:
Fix comment to describe function, not caller

Patch 1 exports a helper which can find the SRH in a packet
Patch 2 does the actual examination of the invoking packet
Patch 3 makes use of the results when trying to find the socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.

This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC8754 says:

ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain.  The invoking packet in the ICMP error
message may contain an SRH.  Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.

For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required.  The following logic is used to determine the destination
address for use by protocol-error handlers.

*  Walk all extension headers of the invoking IPv6 packet to the
   routing extension header preceding the upper-layer header.

   -  If routing header is type 4 Segment Routing Header (SRH)

      o  The SID at Segment List[0] may be used as the destination
         address of the invoking packet.

Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.

Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - avoid sending link-local multicast to multicast routers,
   by Linus Lüssing

* tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
  batman-adv: mcast: don't send link-local multicast to mcast routers
====================

Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit b45396af ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:

[    5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY
[    5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22
[    5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY
[    5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22

Fixes: b45396af ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.

Fixes: 1ff15a71 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.

Fixes: 1ff15a71 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add Doug and Florian as maintainers for gpio-brcmstb, and remove myself.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Each aspeed sgpio bank has 64 gpio pins(32 input pins and 32 output pins).
The hwirq base for each sgpio bank should be multiples of 64 rather than
multiples of 32.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix TUI exit screen refresh race condition in 'perf top'.

 - Fix parsing of Intel PT VM time correlation arguments.

 - Honour CPU filtering command line request of a script's switch events
   in 'perf script'.

 - Fix printing of switch events in Intel PT python script.

 - Fix duplicate alias events list printing in 'perf list', noticed on
   heterogeneous arm64 systems.

 - Fix return value of ids__new(), users expect NULL for failure, not
   ERR_PTR(-ENOMEM).

* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf top: Fix TUI exit screen refresh race condition
  perf pmu: Fix alias events list
  perf scripts python: intel-pt-events.py: Fix printing of switch events
  perf script: Fix CPU filtering of a script's switch events
  perf intel-pt: Fix parsing of VM time correlation arguments
  perf expr: Fix return value of ids__new()

commit 26eee021 ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in
the QorIQ mdio driver but left the (now unused) incorrect bit definition
for MDIO_DATA_BSY in the code. This commit removes it.
Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull i2c fixes from Wolfram Sang:
 "Better input validation for compat ioctls and a documentation bugfix
  for 5.16"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Docs: Fixes link to I2C specification
  i2c: validate user data in compat ioctl

Pull x86 fix from Borislav Petkov:

 - Use the proper CONFIG symbol in a preprocessor check.

* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use the proper name CONFIG_FW_LOADER

Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").

This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.
Signed-off-by: Thomas Toye <thomas@toye.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the following command is executed several times, a coredump file is
generated.

	$ timeout -k 9 5 perf top -e task-clock
	*******
	*******
	*******
	0.01%  [kernel]                  [k] __do_softirq
	0.01%  libpthread-2.28.so        [.] __pthread_mutex_lock
	0.01%  [kernel]                  [k] __ll_sc_atomic64_sub_return
	double free or corruption (!prev) perf top --sort comm,dso
	timeout: the monitored command dumped core

When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.

However SLsmg_reinit_smg() maybe be called by another thread.

SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.

SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.comSigned-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 0e0ae874 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:

  # perf list
  ...
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  ...

Notice how the events are listed twice.

The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".

Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.

Fixes: 0e0ae874 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The same fix in commit 5ec7d18d ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.

Fixes: 86fdb344 ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>