- 01 Feb, 2024 15 commits
-
-
Chin-Yen Lee authored
Because 802.11be chip support MLO mode, driver needs to send new H2C to pass more connected channel information to firmware, to ensure PS mode work fine. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-6-pkshih@realtek.com
-
Po-Hao Huang authored
This adds support for hardware scan after FW version 0.34.35. Currently we only support scanning on single hardware band and support of dual band scan will be added in the future. Adjust the current flow to make driver compatible with different generation ICs. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Po-Hao Huang authored
The channel field slightly differs between WiFi 6 and WiFi 7. So we prepare some required functions in advance, this doesn't change existing wifi 6 ICs behavior. This H2C prepares the channel list to be scanned for. With layout as the following: +--------+--------------------+-------------------+-----------------------+ | header | number of channels | channel info size | channel_info * number | +--------+--------------------+-------------------+-----------------------+ Signed-off-by:
-
Po-Hao Huang authored
This allows scan related logs when FW log debug mode is on. Signed-off-by:
-
Po-Hao Huang authored
Add definition and parsing for wifi 7 extended fields. These fields include hardware index which is current reporting, timestamp and self defined sequences for debug purposes. Signed-off-by:
-
Ping-Ke Shih authored
The chip_ops::fem_setup is to get if a hardware module type contains PA and LNA that will affect how RF calibrations do. The chip_ops::rfe_gpio is to set GPIO PIN MUX according to hardware module type too. 8922A doesn't have these special module types yet, so leave them as NULL. Signed-off-by:
-
Ping-Ke Shih authored
Get thermal value as a clue to do RF calibration if the delta is larger than a threshold, but 8922A doesn't need this, so we only read out the value when debugging to reduce IO. Signed-off-by:
-
Ping-Ke Shih authored
Implement indirect interface v2 to read/write RF registers via PHY registers for 8922A. Signed-off-by:
-
Ping-Ke Shih authored
This function is to set TX/RX path. Especially for 1SS rate, it can select to TX on one or two antenna. Before this operation, stop hardware to prevent transmitting/receiving unexpected packets. After that, restore settings and reset hardware to prevent it stays on abnormal state. Signed-off-by:
-
Ping-Ke Shih authored
To set TX/RX path or set channel, we need these helpers to stop TX and restore settings. The sch_tx stands for scheduler TX channel, and the cfg_ppdu is to stop reporting PPDU status, so we should stop them during setting. Signed-off-by:
-
Ping-Ke Shih authored
Hook implemented handlers to chip_ops, and fill packet frequency and signal strength to RX status from RX PPDU status packet. Signed-off-by:
-
Ping-Ke Shih authored
Hardware puts RX descriptor and packet in RX DMA buffer, so it could be over one buffer size if packet size is 11454, and then it will be split into two segments. WiFi 7 chips use larger size of RX descriptor, so enlarge DMA buffer size according to RX descriptor to have better performance and simple flow. Signed-off-by:
-
Ping-Ke Shih authored
PCI RX ring is a kind of read/write index ring, and DMA and ring index are asynchronous, so suddenly driver gets newer index ahead before DMA. To resolve this rare situation, we use a RX tag as helpers to make sure DMA is done. The RX tag is a 13-bit value, and range is from 1 ~ 0x1FFF, but 0 isn't used so should be skipped. Only enable this validation to coming WiFi 7 chips, because existing chips use different design and don't really meet this situation. Add missed rx_ring_eq_is_full for 8851BE by the way. Signed-off-by:
-
Zong-Zhe Yang authored
During SER (system error recovery), expect to deal with only ISR related to halt. So, refine IMR configuration. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Be higher resolution of SER timer unit from 32ms to 16ms to detect abnormal situation more accurately, and set hardware watchdog timer to 4ms. Signed-off-by:
-
- 31 Jan, 2024 3 commits
-
-
Arend van Spriel authored
The driver found its inception a little after the year 201. According git blame output it was added in 2016 so lets go with that. Fixes: 4d792895 ("brcmfmac: switch to new platform data") Reported-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The following sparse warning was reported: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: warning: no newline at end of file Fixes: 31343230 ("wifi: brcmfmac: export firmware interface functions") Reported-by:
Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/all/20240125165128.7e43a1f3@kernel.org/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/athKalle Valo authored
ath.git patches for v6.9 We have new features for both ath11k and ath12k. ath12k is now under heavy refactoring in preparation for MLO support. Major changes: ath12k * refactoring in preparation for Multi-Link Operation (MLO) support * 1024 Block Ack window size support * provide firmware wmi logs via a trace event ath11k * 36 bit DMA mask support * support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP)
-
- 26 Jan, 2024 22 commits
-
-
Johannes Berg authored
Add cfg80211, mac80211 and iwlwifi to the all_tests config so that the unit tests (enabled by KUNIT_ALL_TESTS) will be run by default. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Jeff Johnson authored
This *mostly* reverts commit 1e1b11b6 ("nl80211/cfg80211: Specify band specific min RSSI thresholds with sched scan"). During the review of a new patch [1] it was observed that the functionality being modified was not actually being used by any in-tree driver. Further research determined that the functionality was originally introduced to support a new Android interface, but that interface was subsequently abandoned. Since the functionality has apparently never been used, remove it. However, to mantain the sanctity of the UABI, keep the nl80211.h assignments, but clearly mark them as obsolete. Cc: Lin Ma <linma@zju.edu.cn> Cc: Vamsi Krishna <quic_vamsin@quicinc.com> Link: https://lore.kernel.org/linux-wireless/20240119151201.8670-1-linma@zju.edu.cn/ [1] Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240125-for-next-v1-1-fd79e01c6c09@quicinc.comSigned-off-by:
-
Miri Korenblit authored
The wiphy_work infra ensures that the entire worker will run with the wiphy mutex. It is useful to have RX handlers running as a wiphy_work, when we don't want the handler to run in parallel with mac80211 work (to avoid races). For example - BT notification can disable eSR starting from the next patch. In ieee80211_set_active_links we first check that eSR is allowed, (drv_can_activate_links) and then activate it. If the BT notif was received after drv_can_activate_links (which returned true), and before the activation - eSR will be activated when it shouldn't. If BT notif is handled with the wiphy mutex, it can't run in parallel to ieee80211_set_active_links, which also holds that mutex. Add the necessary infrastructure here, for use in the next commit. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by:
Gregory Greenman <gregory.greenman@intel.com> Reviewed-by:
-
Miri Korenblit authored
This callback checks if a given bitmap of active_links will be supported by the driver or not. Signed-off-by:
-
Gregory Greenman authored
Start supporting API version 87 for new devices. Signed-off-by:
-
Emmanuel Grumbach authored
This command version adds two news fields: sbb_bandwidth and sbb_ctrl_channel_loc They will be populated later. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by:
-
Benjamin Berg authored
Without SMP the function is just a stub that returns an error code. Add a compile time check for CONFIG_SMP in the interest of not logging an error if setting affinity is not possible anyway. Signed-off-by:
Benjamin Berg <benjamin.berg@intel.com> Reviewed-by:
-
Johannes Berg authored
We should - at least for now - advertise common nominal packet padding of 16µs instead of the more specific PPE thresholds. Signed-off-by:
-
Miri Korenblit authored
Link ID in time event data is -1 when the time event is cleared. Change the type of the link ID in the time event data structure and in the affected function from unsigned to signed. Fixes: 13506583 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd") Signed-off-by:
-
Johannes Berg authored
There's either the pldr_sync case, in which case we didn't want or do the retry loops anyway, or things will just continue to fail. Remove the retry loop that was added in a previous attempt to address the issue that was later (though still a bit broken) addressed by the pldr_sync case. Signed-off-by:
-
Johannes Berg authored
If the STEP (the interface between MAC and PHY) is in URM (a lower speed mode) then we cannot use 320 MHz MCS > 9. Therefore, limit the MCS in our capabilities in this case. Note that this also limits the TX/rate scaling since that takes both TX and RX capabilities into account. Signed-off-by:
-
Mukesh Sisodiya authored
The driver should not send 160 MHz BW support for 5 GHz band in HE if PCI subsystem device ID indicates no 160 MHz support. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Johannes Berg authored
There's no need to print this, it's a known issue and the workaround works just fine. Make the reallocation message just a debug message. Signed-off-by:
-
Mukesh Sisodiya authored
Add support for the new 802.11be device with limites capabilities: - 320 MHz isn't supported - MCSs 12 and 13 are not supported Signed-off-by:
-
Johannes Berg authored
We used to have a test built into the code for this internally, but now we can put that into kunit and let everyone run it, to verify the devinfo table ordering if it's changed. Signed-off-by:
-
Michael-CY Lee authored
This patch makes duration in scan request be applicable when using SW scan, but only accepts durations greater than the default value for the following reasons: 1. Most APs have a beacoon interval of 100ms. 2. Sending and receiving probe require some delay. 3. Setting channel to HW also requires some delays Signed-off-by:
Michael-CY Lee <michael-cy.lee@mediatek.com> Link: https://msgid.link/20240123054752.22833-1-michael-cy.lee@mediatek.comSigned-off-by:
-
Benjamin Berg authored
This does not change anything effectively, but it is closer to what the code is trying to achieve here. i.e. select the link data if it is an MLD and fall back to using the deflink otherwise. Fixes: 0f99f087 ("wifi: mac80211: Print local link address during authentication") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Johannes Berg authored
When parsing 6 GHz operation, don't set the bss_conf values. We only commit to that later in association, so move the code there. Also clear it later. While at it, handle IEEE80211_6GHZ_CTRL_REG_VLP_AP. Signed-off-by:
-
Johannes Berg authored
To simplify the code in the next patch, disallow drivers supporting 40 MHz in HT but not HE, since we'd otherwise have to track local maximum bandwidth per mode there. Signed-off-by:
-
Johannes Berg authored
For verifying the required HE capabilities are supported locally, we access the HE capability element of the AP. Simplify that access, we've already parsed and validated it when parsing elements. Signed-off-by:
-
Johannes Berg authored
We already parse all the BSS elements into elems, there's really no need to separately find EHT/ML again. Remove the extra code. Signed-off-by:
-
Johannes Berg authored
The only user of this function passes a lot of pointers directly from the parsed elements, so it's simpler to just pass the entire elements parsing struct. This also shows that the ht_cap is actually unused. Signed-off-by:
-
