Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph, fixing namespace locking when
   dealing with the effects log, and a rapid add/remove issue (Keith)

 - blktrace tweak, ensuring requests with -1 sectors are shown (Jan)

 - link power management quirk for a Smasung SSD (Hans)

 - m68k nfblock dynamic major number fix (Chengguang)

 - series fixing blk-iolatency inflight counter issue (Liu)

 - ensure that we clear ->private when setting up the aio kiocb (Mike)

 - __find_get_block_slow() rate limit print (Tetsuo)

* tag 'for-linus-20190209' of git://git.kernel.dk/linux-block:
  blk-mq: remove duplicated definition of blk_mq_freeze_queue
  Blk-iolatency: warn on negative inflight IO counter
  blk-iolatency: fix IO hang due to negative inflight counter
  blktrace: Show requests without sector
  fs: ratelimit __find_get_block_slow() failure message.
  m68k: set proper major_num when specifying module param major_num
  libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD
  nvme-pci: fix rapid add remove sequence
  nvme: lock NS list changes while handling command effects
  aio: initialize kiocb private in case any filesystems expect it.

Pull mtd fixes from Boris Brezillon:

 - Fix a problem with the imx28 ECC engine

 - Remove a debug trace introduced in 2b6f0090 ("mtd: Check
   add_mtd_device() ret code")

 - Make sure partitions of size 0 can be registered

 - Fix kernel-doc warning in the rawnand core

 - Fix the error path of spinand_init() (missing manufacturer cleanup in
   a few places)

 - Address a problem with the SPI NAND PROGRAM LOAD operation which does
   not work as expected on some parts.

* tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd:
  mtd: rawnand: gpmi: fix MX28 bus master lockup problem
  mtd: Make sure mtd->erasesize is valid even if the partition is of size 0
  mtd: Remove a debug trace in mtdpart.c
  mtd: rawnand: fix kernel-doc warnings
  mtd: spinand: Fix the error/cleanup path in spinand_init()
  mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache

Pull xen fixes from Juergen Gross:
 "Two very minor fixes: one remove of a #include for an unused header
  and a fix of the xen ML address in MAINTAINERS"

* tag 'for-linus-5.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: unify reference to xen-devel list
  arch/arm/xen: Remove duplicate header

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a bit larger than normal, as we had not managed to send out a
  pull request before traveling for a week without my signing key.

  There are multiple code fixes for older bugs, all of which should get
  backported into stable kernels:

   - tango: one fix for multiplatform configurations broken on other
     platforms when tango is enabled

   - arm_scmi: device unregistration fix

   - iop32x: fix kernel oops from extraneous __init annotation

   - pxa: remove a double kfree

   - fsl qbman: close an interrupt clearing race

  The rest is the usual collection of smaller fixes for device tree
  files, on the renesas, allwinner, meson, omap, davinci, qualcomm and
  imx platforms.

  Some of these are for compile-time warnings, most are for board
  specific functionality that fails to work because of incorrect
  settings"

* tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: tango: Improve ARCH_MULTIPLATFORM compatibility
  firmware: arm_scmi: provide the mandatory device release callback
  ARM: iop32x/n2100: fix PCI IRQ mapping
  arm64: dts: add msm8996 compatible to gicv3
  ARM: dts: am335x-shc.dts: fix wrong cd pin level
  ARM: dts: n900: fix mmc1 card detect gpio polarity
  ARM: dts: omap3-gta04: Fix graph_port warning
  ARM: pxa: ssp: unneeded to free devm_ allocated data
  ARM: dts: r8a7743: Convert to new LVDS DT bindings
  soc: fsl: qbman: avoid race in clearing QMan interrupt
  arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
  arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
  arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
  ARM: dts: da850: fix interrupt numbers for clocksource
  dt-bindings: imx8mq: Number clocks consecutively
  arm64: dts: meson: Fix mmc cd-gpios polarity
  ARM: dts: imx6sx: correct backward compatible of gpt
  ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property
  ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3
  ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
  ...

Pull arm64 fixes from Will Deacon:
 "Two arm64 fixes for -rc6. They resolve a kernel NULL dereference in
  kexec and bogus kernel page table dumping when userspace is configured
  for 52-bit virtual addressing.

  Summary:

   - Fix kernel oops when attemping kexec_file() with a NULL cmdline

   - Fix page table output in debugfs when ARM64_USER_VA_BITS_52=y"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: handle empty command-line
  arm64: ptdump: Don't iterate kernel page tables using PTRS_PER_PXX

Pull powerpc fixes from Michael Ellerman:
 "Just two fixes, both going to stable.

   - Our support for split pmd page table lock had a bug which could
     lead to a crash on mremap() when using the Radix MMU (Power9 only).

   - A fix for the PAPR SCM driver (nvdimm) we added last release, which
     had a bug where we might mis-handle a hypervisor response leading
     to us failing to attach the memory region.

  Thanks to: Aneesh Kumar K.V, Oliver O'Halloran"

* tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Use the correct bind address
  powerpc/radix: Fix kernel crash with mremap()

Pull signal fixes from Eric Biederman:
 "This contains four small fixes for signal handling. A missing range
  check, a regression fix, prioritizing signals we have already started
  a signal group exit for, and better detection of synchronous signals.

  The confused decision of which signals to handle failed spectacularly
  when a timer was pointed at SIGBUS and the stack overflowed. Resulting
  in an unkillable process in an infinite loop instead of a SIGSEGV and
  core dump"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Better detection of synchronous signals
  signal: Always notice exiting tasks
  signal: Always attempt to allocate siginfo for SIGSTOP
  signal: Make siginmask safe when passed a signal of 0

Pull SCSI fixes from James Bottomley:
 "This is a set of five minor fixes (although, tecnhincally, the aicxxx
  fix is for a major problem in that the driver won't load without it,
  but I think the fact it's taken us since 4.10 to discover this
  indicates that the user base for these things has declined)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxlflash: Prevent deadlock when adapter probe fails
  Revert "scsi: libfc: Add WARN_ON() when deleting rports"
  scsi: sd_zbc: Fix zone information messages
  scsi: target: make the pi_prot_format ConfigFS path readable
  scsi: aic94xx: fix module loading

Pull IOMMU fix from Joerg Roedel:
 "Intel decided to leave the newly added Scalable Mode Feature
  default-disabled for now. The patch here accomplishes that"

* tag 'iommu-fixes-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Leave scalable mode default off

Pull PCI fix from Bjorn Helgaas:
 "Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) that
  breaks PCIe on I.MX SoCs (Thinh Nguyen)"

* tag 'pci-v5.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX)

Pull ACPI fix from Rafael Wysocki:
 "This prevents excessive ACPI debug messages from being printed to the
  kernel log, which has started to happen after one of the recent ACPICA
  commits (Erik Schmauss)"

* tag 'acpi-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: Set debug output flags independent of ACPICA

As the prototype has been defined in "include/linux/blk-mq.h", the one
in "block/blk-mq.h" can be removed then.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is to catch any unexpected negative value of inflight IO counter.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Our test reported the following stack, and vmcore showed that
->inflight counter is -1.

[ffffc9003fcc38d0] __schedule at ffffffff8173d95d
[ffffc9003fcc3958] schedule at ffffffff8173de26
[ffffc9003fcc3970] io_schedule at ffffffff810bb6b6
[ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb
[ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3
[ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a
[ffffc9003fcc3b08] generic_make_request at ffffffff81368b49
[ffffc9003fcc3b68] submit_bio at ffffffff81368d7d
[ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4]
[ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4]
[ffffc9003fcc3d68] do_writepages at ffffffff811c49ae
[ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188
[ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301
[ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4]
[ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b
[ffffc9003fcc3ee8] do_fsync at ffffffff81285abd
[ffffc9003fcc3f18] sys_fsync at ffffffff81285d50
[ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04
[ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e

The ->inflight counter may be negative (-1) if

1) blk-iolatency was disabled when the IO was issued,

2) blk-iolatency was enabled before this IO reached its endio,

3) the ->inflight counter is decreased from 0 to -1 in endio()

In fact the hang can be easily reproduced by the below script,

H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/test

echo "+io" > $H/cgroup.subtree_control
mkdir -p $P

echo $$ > $P/cgroup.procs

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.

Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull networking fixes from David Miller:
 "This pull request is dedicated to the upcoming snowpocalypse parts 2
  and 3 in the Pacific Northwest:

   1) Drop profiles are broken because some drivers use dev_kfree_skb*
      instead of dev_consume_skb*, from Yang Wei.

   2) Fix IWLWIFI kconfig deps, from Luca Coelho.

   3) Fix percpu maps updating in bpftool, from Paolo Abeni.

   4) Missing station release in batman-adv, from Felix Fietkau.

   5) Fix some networking compat ioctl bugs, from Johannes Berg.

   6) ucc_geth must reset the BQL queue state when stopping the device,
      from Mathias Thore.

   7) Several XDP bug fixes in virtio_net from Toshiaki Makita.

   8) TSO packets must be sent always on queue 0 in stmmac, from Jose
      Abreu.

   9) Fix socket refcounting bug in RDS, from Eric Dumazet.

  10) Handle sparse cpu allocations in bpf selftests, from Martynas
      Pumputis.

  11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
      Feitkau.

  12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
      Greg Kroah-Hartman.

  13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
      ccid, from Eric Dumazet.

  14) Need to reload WoL password into bcmsysport device after deep
      sleeps, from Florian Fainelli.

  15) Remove filter from mask before freeing in cls_flower, from Petr
      Machata.

  16) Missing release and use after free in error paths of s390 qeth
      code, from Julian Wiedmann.

  17) Fix lockdep false positive in dsa code, from Marc Zyngier.

  18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.

  19) Fix EQ firmware assert in qed driver, from Manish Chopra.

  20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: dsa: b53: Fix for failure when irq is not defined in dt
  sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
  geneve: should not call rt6_lookup() when ipv6 was disabled
  net: Don't default Cavium PTP driver to 'y'
  net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net/mlx5e: Don't overwrite pedit action when multiple pedit used
  net/mlx5e: Update hw flows when encap source mac changed
  qed*: Advance drivers version to 8.37.0.20
  qed: Change verbosity for coalescing message.
  qede: Fix system crash on configuring channels.
  qed: Consider TX tcs while deriving the max num_queues for PF.
  ...

Pull char/misc fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.0-rc6.

  Nothing huge here, some more binderfs fixups found as people use it,
  and there is a "large" selftest added to validate the binderfs code,
  which makes up the majority of this pull request.

  There's also some small mei and mic fixes to resolve some reported
  issues.

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mic: vop: Fix crash on remove
  mic: vop: Fix use-after-free on remove
  binderfs: remove separate device_initcall()
  fpga: stratix10-soc: fix wrong of_node_put() in init function
  mic: vop: Fix broken virtqueues
  mei: free read cb on ctrl_wr list flush
  samples: mei: use /dev/mei0 instead of /dev/mei
  mei: me: add ice lake point device id.
  binderfs: respect limit on binder control creation
  binder: fix CONFIG_ANDROID_BINDER_DEVICES
  selftests: add binderfs selftests

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes for 5.0-rc6.

  Well, not so much "driver core" as "debugfs". There's a lot of
  outstanding debugfs cleanup patches coming in through different
  subsystem trees, and in that process the debugfs core was found that
  it really should return errors when something bad happens, to prevent
  random files from showing up in the root of debugfs afterward. So
  debugfs was fixed up to handle this properly, and then two fixes for
  the relay and blk-mq code was needed as it was making invalid
  assumptions about debugfs return values.

  There's also a cacheinfo fix in here that resolves a tiny issue.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  blk-mq: protect debugfs_create_files() from failures
  relay: check return of create_buf_file() properly
  debugfs: debugfs_lookup() should return NULL if not found
  debugfs: return error values, not NULL
  debugfs: fix debugfs_rename parameter checking
  cacheinfo: Keep the old value if of_property_read_u32 fails

Pull staging/IIO driver fixes from Greg KH:
 "Here are some small iio and staging driver fixes for 5.0-rc6.

  Nothing big, just resolve some reported IIO driver issues, and one
  staging driver bug. One staging driver patch was added and then
  reverted as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()"
  staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()
  staging: octeon: fix broken phylib usage
  iio: ti-ads8688: Update buffer allocation for timestamps
  tools: iio: iio_generic_buffer: make num_loops signed
  iio: adc: axp288: Fix TS-pin handling
  iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial fixes for 5.0-rc6.

  Nothing huge, just a few small fixes for reported issues. The speakup
  fix is in here as it is a tty operation issue.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: fix race between flush_to_ldisc and tty_open
  staging: speakup: fix tty-operation NULL derefs
  serial: sh-sci: Do not free irqs that have already been freed
  serial: 8250_pci: Make PCI class test non fatal
  tty: serial: 8250_mtk: Fix potential NULL pointer dereference

Pull USB fixes from Grek KH:
 "Here are some small USB fixes for 5.0-rc6.

  Nothing huge, the normal amount of USB gadget fixes as well as some
  USB phy fixes. There's also a typec fix as well. Full details are in
  the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Correct the PPS out_volt calculation
  usb: gadget: musb: fix short isoc packets with inventra dma
  usb: phy: am335x: fix race condition in _probe
  usb: dwc3: exynos: Fix error handling of clk_prepare_enable
  usb: phy: fix link errors
  usb: gadget: udc: net2272: Fix bitwise and boolean operations
  usb: dwc3: gadget: Handle 0 xfer length for OUT EP

Pull xfs fixes from Darrick Wong:
 "Here are a handful of XFS fixes to fix a data corruption problem, a
  crasher bug, and a deadlock.

  Summary:

   - Fix cache coherency problem with writeback mappings

   - Fix buffer deadlock when shutting fs down

   - Fix a null pointer dereference when running online repair"

* tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: set buffer ops when repair probes for btree type
  xfs: end sync buffer I/O properly on shutdown error
  xfs: eof trim writeback mapping as soon as it is cached

Pull drm fixes from Dave Airlie:
 "Missed fixes last week as had nothing until amdgpu showed up on
  Saturday. Other stuff has since rolled in along with some more amdgpu
  fixes, so we have two weeks of those, and some i915, vmwgfx, sun4i,
  rockchip and omap fixes.

  amdgpu/radeon:
   - fix crash on passthrough for SI
   - fencing fix for shared buffers
   - APU hwmon fix
   - API powerplay fix
   - eDP freesync fix
   - PASID mgr locking fix
   - KFD warning fix
   - DC/powerplay fix
   - raven revision ids fix
   - vega20 doorbell fix

  i915:
   - SNB display fix
   - SKL srckey mask fix
   - ICL DDI clock selection fix

  vmwgfx:
   - DMA API fix
   - IOMMU detection fix
   - display fixes

  sun4i:
   - tcon clock fix

  rockchip:
   - SPDX identifier fix

  omap:
   - DSI fixes"

* tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  drm/omap: dsi: Hack-fix DSI bus flags
  drm/omap: dsi: Fix OF platform depopulate
  drm/omap: dsi: Fix crash in DSI debug dumps
  drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen
  drm/amd/display: Attach VRR properties for eDP connectors
  drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu
  drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr
  drm/i915: always return something on DDI clock selection
  drm/i915: Fix skl srckey mask bits
  drm/vmwgfx: Improve on IOMMU detection
  drm/vmwgfx: Fix setting of dma masks
  drm/vmwgfx: Also check for crtc status while checking for DU active
  drm/vmwgfx: Fix an uninitialized fence handle value
  drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user
  drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init
  drm/amdgpu: fix the incorrect external id for raven series
  drm/amdgpu: Implement doorbell self-ring for NBIO 7.4
  drm/amd/display: Fix fclk idle state
  drm/amdgpu: Transfer fences to dmabuf importer
  drm/amd/powerplay: Fix missing break in switch
  ...

In the linux kernel MAINTAINERS file, largely
  "xen-devel@lists.xenproject.org (moderated for non-subscribers)"
is used to refer to the xen-devel mailing list.

The DRM DRIVERS FOR XEN section entry mentions
xen-devel@lists.xen.org instead, but that is just the same
mailing list as the mailing list above.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Fixes the issues with non BCM58XX chips in the b53 driver
failing, when the irq is not specified in the device tree.

Removed the check for BCM58XX in b53_srab_prepare_irq(),
so the 'port->irq' will be set to '-EXIO' if the irq is not
specified in the device tree.

Fixes: 16994374 ("net: dsa: b53: Make SRAB driver manage port interrupts")
Fixes: b2ddc48a ("net: dsa: b53: Do not fail when IRQ are not initialized")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm-misc-fixes for v5.0-rc6:
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
  i915 with GVT-g enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com

Merge tag 'drm-intel-fixes-2019-02-07-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.0-rc6:
- SNB DPLL sanitize
- ICL DDI clock selection
- SLK srckey mask
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lg2s6nur.fsf@intel.com

Pull x86 platform driver fixlet from Darren Hart:
 "Correct Documentation/ABI 4.21 KernelVersion to 5.0"

* tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86:
  Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0

Pull KVM fixes from Paolo Bonzini:
 "Three security fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
  KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
  kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)

Pull nfsd fixes from Bruce Fields:
 "Two small nfsd bugfixes for 5.0, for an RDMA bug and a file clone bug"

* tag 'nfsd-5.0-1' of git://linux-nfs.org/~bfields/linux:
  svcrdma: Remove max_sge check at connect time
  nfsd: Fix error return values for nfsd4_clone_file_range()

Merge tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Both of these fixes address issues in changes merged for 5.0-rc4:

   - Fix DM core's missing memory barrier before waitqueue_active()
     calls.

   - Fix DM core's clone_bio() to work when cloning a subset of a bio
     with an integrity payload; bio_integrity_trim() wasn't getting
     called due to bio_trim()'s early return"

* tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: don't use bio_trim() afterall
  dm: add memory barrier before waitqueue_active

Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Hangbin Liu says:

====================
fix two kernel panics when disabled IPv6 on boot up

When disabled IPv6 on boot up, since there is no ipv6 route tables, we should
not call rt6_lookup. Fix them by checking if we have inet6_dev pointer on
netdevice.

v2: Fix idev reference leak, declarations and code mixing as Stefano,
    Eric pointed. Since we only want to check if idev exists and not
    reference it, use __in6_dev_get() insteand of in6_dev_get().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should
not call ip6_err_gen_icmpv6_unreach(). This:

  ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1
  ip link set sit1 up
  ip addr add 198.51.100.1/24 dev sit1
  ping 198.51.100.2

if IPv6 is disabled at boot time, will crash the kernel.

v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
    as we only need to check that idev exists and we are under
    rcu_read_lock() (from netif_receive_skb_internal()).
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: ca15a078 ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc: Oussama Ghorbel <ghorbel@pivasoftware.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we add a new GENEVE device with IPv6 remote, checking only for
IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the
kernel command line (ipv6.disable=1), and calling rt6_lookup() would
cause a NULL pointer dereference.

v2:
- don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet)
- there's no need to use in6_dev_get() as we only need to check that
  idev exists (reported by David Ahern). This is under RTNL, so we can
  simply use __in6_dev_get() instead (Stefano, Eric).
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: c40e89fd ("geneve: configure MTU based on a lower device")
Cc: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bugzilla: 1671904

There are multiple code paths where an hrtimer may have been started to
emulate an L1 VMX preemption timer that can result in a call to free_nested
without an intervening L2 exit where the hrtimer is normally
cancelled. Unconditionally cancel in free_nested to cover all cases.

Embargoed until Feb 7th 2019.
Signed-off-by: Peter Shier <pshier@google.com>
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@kernel.org
Message-Id: <20181011184646.154065-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Bugzilla: 1671930

Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with
memory operand, INVEPT, INVVPID) can incorrectly inject a page fault
when passed an operand that points to an MMIO address.  The page fault
will use uninitialized kernel stack memory as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just
ensure that the error code and CR2 are zero.

Embargoed until Feb 7th 2019.
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_ioctl_create_device() does the following:

1. creates a device that holds a reference to the VM object (with a borrowed
   reference, the VM's refcount has not been bumped yet)
2. initializes the device
3. transfers the reference to the device to the caller's file descriptor table
4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real
   reference

The ownership transfer in step 3 must not happen before the reference to the VM
becomes a proper, non-borrowed reference, which only happens in step 4.
After step 3, an attacker can close the file descriptor and drop the borrowed
reference, which can cause the refcount of the kvm object to drop to zero.

This means that we need to grab a reference for the device before
anon_inode_getfd(), otherwise the VM can disappear from under us.

Fixes: 852b6d57 ("kvm: add device control API")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER.  Ultimately causing a loop failing
to deliver SIGHUP but always trying.

When the stack overflows delivery of SIGHUP fails and force_sigsegv is
called.  Unfortunately because SIGSEGV is numerically higher than
SIGHUP next_signal tries again to deliver a SIGHUP.

From a quality of implementation standpoint attempting to deliver the
timer SIGHUP signal is wrong.  We should attempt to deliver the
synchronous SIGSEGV signal we just forced.

We can make that happening in a fairly straight forward manner by
instead of just looking at the signal number we also look at the
si_code.  In particular for exceptions (aka synchronous signals) the
si_code is always greater than 0.

That still has the potential to pick up a number of asynchronous
signals as in a few cases the same si_codes that are used
for synchronous signals are also used for asynchronous signals,
and SI_KERNEL is also included in the list of possible si_codes.

Still the heuristic is much better and timer signals are definitely
excluded.  Which is enough to prevent all known ways for someone
sending a process signals fast enough to cause unexpected and
arguably incorrect behavior.

Cc: stable@vger.kernel.org
Fixes: a27341cd ("Prioritize synchronous signals over 'normal' signals")
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER.  Ultimately causing a loop
failing to deliver SIGHUP but always trying.

Upon examination it turns out part of the problem is actually most of
the solution.  Since 2.5 signal delivery has found all fatal signals,
marked the signal group for death, and queued SIGKILL in every threads
thread queue relying on signal->group_exit_code to preserve the
information of which was the actual fatal signal.

The conversion of all fatal signals to SIGKILL results in the
synchronous signal heuristic in next_signal kicking in and preferring
SIGHUP to SIGKILL.  Which is especially problematic as all
fatal signals have already been transformed into SIGKILL.

Instead of dequeueing signals and depending upon SIGKILL to
be the first signal dequeued, first test if the signal group
has already been marked for death.  This guarantees that
nothing in the signal queue can prevent a process that needs
to exit from exiting.

Cc: stable@vger.kernel.org
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Ref: ebf5ebe3 ("[PATCH] signal-fixes-2.5.59-A4")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gitSigned-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull HID fix from Jiri Kosina:
 "A fix for a bug in hid-debug that can lock up the kernel in infinite
  loop (CVE-2019-3819), from Vladis Dronov"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: debug: fix the ring buffer implementation