Replace the existing entry to the newly allocated one in case of CoW. 
Also, we mark the entry as PAGECACHE_TAG_TOWRITE so writeback marks this
entry as writeprotected.  This helps us snapshots so new write pagefaults
after snapshots trigger a CoW.

Link: https://lkml.kernel.org/r/20220603053738.1218681-11-ruansy.fnst@fujitsu.comSigned-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In the case where the iomap is a write operation and iomap is not equal to
srcmap after iomap_begin, we consider it is a CoW operation.

In this case, the destination (iomap->addr) points to a newly allocated
extent.  It is needed to copy the data from srcmap to the extent.  In
theory, it is better to copy the head and tail ranges which is outside of
the non-aligned area instead of copying the whole aligned range.  But in
dax page fault, it will always be an aligned range.  So copy the whole
range in this case.

Link: https://lkml.kernel.org/r/20220603053738.1218681-10-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add address output in dax_iomap_pfn() in order to perform a memcpy() in
CoW case.  Since this function both output address and pfn, rename it to
dax_iomap_direct_access().

[ruansy.fnst@fujitsu.com: initialize `rc', per Dan]
  Link: https://lore.kernel.org/linux-fsdevel/Yp8FUZnO64Qvyx5G@kili/
  Link: https://lkml.kernel.org/r/20220607143837.161174-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-9-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Introduce a PAGE_MAPPING_DAX_COW flag to support association with CoW file
mappings.  In this case, since the dax-rmap has already took the
responsibility to look up for shared files by given dax page, the
page->mapping is no longer to used for rmap but for marking that this dax
page is shared.  And to make sure disassociation works fine, we use
page->index as refcount, and clear page->mapping to the initial state when
page->index is decreased to 0.

With the help of this new flag, it is able to distinguish normal case and
CoW case, and keep the warning in normal case.

Link: https://lkml.kernel.org/r/20220603053738.1218681-8-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Introduce xfs_notify_failure.c to handle failure related works, such as
implement ->notify_failure(), register/unregister dax holder in xfs, and
so on.

If the rmap feature of XFS enabled, we can query it to find files and
metadata which are associated with the corrupt data.  For now all we do is
kill processes with that file mapped into their address spaces, but future
patches could actually do something about corrupt metadata.

After that, the memory failure needs to notify the processes who are using
those files.

Link: https://lkml.kernel.org/r/20220603053738.1218681-7-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This new function is a variant of mf_generic_kill_procs that accepts a
file, offset pair instead of a struct to support multiple files sharing a
DAX mapping.  It is intended to be called by the file systems as part of
the memory_failure handler after the file system performed a reverse
mapping from the storage address to the file and file offset.

Link: https://lkml.kernel.org/r/20220603053738.1218681-6-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The current dax_lock_page() locks dax entry by obtaining mapping and index
in page.  To support 1-to-N RMAP in NVDIMM, we need a new function to lock
a specific dax entry corresponding to this file's mapping,index.  And
output the page corresponding to the specific dax entry for caller use.

Link: https://lkml.kernel.org/r/20220603053738.1218681-5-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When memory-failure occurs, we call this function which is implemented by
each kind of devices.  For the fsdax case, pmem device driver implements
it.  Pmem device driver will find out the filesystem in which the
corrupted page located in.

With dax_holder notify support, we are able to notify the memory failure
from pmem driver to upper layers.  If there is something not support in
the notify routine, memory_failure will fall back to the generic hanlder.

Link: https://lkml.kernel.org/r/20220603053738.1218681-4-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory_failure_dev_pagemap code is a bit complex before introduce RMAP
feature for fsdax.  So it is needed to factor some helper functions to
simplify these code.

[akpm@linux-foundation.org: fix CONFIG_HUGETLB_PAGE=n build]
[zhengbin13@huawei.com: fix redefinition of mf_generic_kill_procs]
  Link: https://lkml.kernel.org/r/20220628112143.1170473-1-zhengbin13@huawei.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-3-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.wiliams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2.

The patchset fsdax-rmap is aimed to support shared pages tracking for
fsdax.

It moves owner tracking from dax_assocaite_entry() to pmem device driver,
by introducing an interface ->memory_failure() for struct pagemap.  This
interface is called by memory_failure() in mm, and implemented by pmem
device.

Then call holder operations to find the filesystem which the corrupted
data located in, and call filesystem handler to track files or metadata
associated with this page.

Finally we are able to try to fix the corrupted data in filesystem and do
other necessary processing, such as killing processes who are using the
files affected.

The call trace is like this:
memory_failure()
|* fsdax case
|------------
|pgmap->ops->memory_failure()      => pmem_pgmap_memory_failure()
| dax_holder_notify_failure()      =>
|  dax_device->holder_ops->notify_failure() =>
|                                     - xfs_dax_notify_failure()
|  |* xfs_dax_notify_failure()
|  |--------------------------
|  |   xfs_rmap_query_range()
|  |    xfs_dax_failure_fn()
|  |    * corrupted on metadata
|  |       try to recover data, call xfs_force_shutdown()
|  |    * corrupted on file data
|  |       try to recover data, call mf_dax_kill_procs()
|* normal case
|-------------
|mf_generic_kill_procs()


The patchset fsdax-reflink attempts to add CoW support for fsdax, and
takes XFS, which has both reflink and fsdax features, as an example.

One of the key mechanisms needed to be implemented in fsdax is CoW.  Copy
the data from srcmap before we actually write data to the destination
iomap.  And we just copy range in which data won't be changed.

Another mechanism is range comparison.  In page cache case, readpage() is
used to load data on disk to page cache in order to be able to compare
data.  In fsdax case, readpage() does not work.  So, we need another
compare data with direct access support.

With the two mechanisms implemented in fsdax, we are able to make reflink
and fsdax work together in XFS.


This patch (of 14):

To easily track filesystem from a pmem device, we introduce a holder for
dax_device structure, and also its operation.  This holder is used to
remember who is using this dax_device:

 - When it is the backend of a filesystem, the holder will be the
   instance of this filesystem.
 - When this pmem device is one of the targets in a mapped device, the
   holder will be this mapped device.  In this case, the mapped device
   has its own dax_device and it will follow the first rule.  So that we
   can finally track to the filesystem we needed.

The holder and holder_ops will be set when filesystem is being mounted,
or an target device is being activated.

Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.comSigned-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.wiliams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The objective is to test device migration mechanism in pages marked as
COW, for private and coherent device type.  In case of writing to COW
private page(s), a page fault will migrate pages back to system memory
first.  Then, these pages will be duplicated.  In case of COW device
coherent type, pages are duplicated directly from device memory.

Link: https://lkml.kernel.org/r/20220715150521.18165-15-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The intention is to test hmm device coherent type under different get user
pages paths.  Also, test gup with FOLL_LONGTERM flag set in device
coherent pages.  These pages should get migrated back to system memory.

Link: https://lkml.kernel.org/r/20220715150521.18165-14-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add two more parameters to set spm_addr_dev0 & spm_addr_dev1 addresses. 
These two parameters configure the start SP addresses for each device in
test_hmm driver.  Consequently, this configures zone device type as
coherent.

Link: https://lkml.kernel.org/r/20220715150521.18165-13-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Test cases such as migrate_fault and migrate_multiple, were modified to
explicit migrate from device to sys memory without the need of page
faults, when using device coherent type.

Snapshot test case updated to read memory device type first and based on
that, get the proper returned results migrate_ping_pong test case added to
test explicit migration from device to sys memory for both private and
coherent zone types.

Helpers to migrate from device to sys memory and vicerversa were also
added.

Link: https://lkml.kernel.org/r/20220715150521.18165-12-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Device Coherent type uses device memory that is coherently accesible by
the CPU.  This could be shown as SP (special purpose) memory range at the
BIOS-e820 memory enumeration.  If no SP memory is supported in system,
this could be faked by setting CONFIG_EFI_FAKE_MEMMAP.

Currently, test_hmm only supports two different SP ranges of at least
256MB size. This could be specified in the kernel parameter variable
efi_fake_mem. Ex. Two SP ranges of 1GB starting at 0x100000000 &
0x140000000 physical address. Ex.
efi_fake_mem=1G@0x100000000:0x40000,1G@0x140000000:0x40000

Private and coherent device mirror instances can be created in the same
probed.  This is done by passing the module parameters spm_addr_dev0 &
spm_addr_dev1.  In this case, it will create four instances of
device_mirror.  The first two correspond to private device type, the last
two to coherent type.  Then, they can be easily accessed from user space
through /dev/hmm_mirror<num_device>.  Usually num_device 0 and 1 are for
private, and 2 and 3 for coherent types.  If no module parameters are
passed, two instances of private type device_mirror will be created only.

Link: https://lkml.kernel.org/r/20220715150521.18165-11-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Poppple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In order to configure device coherent in test_hmm, two module parameters
should be passed, which correspond to the SP start address of each device
(2) spm_addr_dev0 & spm_addr_dev1.  If no parameters are passed, private
device type is configured.

Link: https://lkml.kernel.org/r/20220715150521.18165-10-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Poppple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add new ioctl cmd to query zone device type.  This will be used once the
test_hmm adds zone device coherent type.

Link: https://lkml.kernel.org/r/20220715150521.18165-9-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Poppple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When CPU is connected throug XGMI, it has coherent access to VRAM
resource.  In this case that resource is taken from a table in the device
gmc aperture base.  This resource is used along with the device type,
which could be DEVICE_PRIVATE or DEVICE_COHERENT to create the device page
map region.

Also, MIGRATE_VMA_SELECT_DEVICE_COHERENT flag is selected for coherent
type case during migration to device.

Link: https://lkml.kernel.org/r/20220715150521.18165-8-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Currently any attempts to pin a device coherent page will fail.  This is
because device coherent pages need to be managed by a device driver, and
pinning them would prevent a driver from migrating them off the device.

However this is no reason to fail pinning of these pages.  These are
coherent and accessible from the CPU so can be migrated just like pinning
ZONE_MOVABLE pages.  So instead of failing all attempts to pin them first
try migrating them out of ZONE_DEVICE.

[hch@lst.de: rebased to the split device memory checks, moved migrate_device_page to migrate_device.c]
Link: https://lkml.kernel.org/r/20220715150521.18165-7-alex.sierra@amd.comSigned-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This case is used to migrate pages from device memory, back to system
memory.  Device coherent type memory is cache coherent from device and CPU
point of view.

Link: https://lkml.kernel.org/r/20220715150521.18165-6-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Poppple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

With DEVICE_COHERENT, we'll soon have vm_normal_pages() return
device-managed anonymous pages that are not LRU pages.  Although they
behave like normal pages for purposes of mapping in CPU page, and for COW.
They do not support LRU lists, NUMA migration or THP.

Callers to follow_page() currently don't expect ZONE_DEVICE pages,
however, with DEVICE_COHERENT we might now return ZONE_DEVICE.  Check for
ZONE_DEVICE pages in applicable users of follow_page() as well.

Link: https://lkml.kernel.org/r/20220715150521.18165-5-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>	[v2]
Reviewed-by: Alistair Popple <apopple@nvidia.com>	[v6]
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Device memory that is cache coherent from device and CPU point of view. 
This is used on platforms that have an advanced system bus (like CAPI or
CXL).  Any page of a process can be migrated to such memory.  However, no
one should be allowed to pin such memory so that it can always be evicted.

[hch@lst.de: rebased ontop of the refcount changes, remove is_dev_private_or_coherent_page]
Link: https://lkml.kernel.org/r/20220715150521.18165-4-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It makes more sense to have these helpers in zone specific header
file, rather than the generic mm.h

Link: https://lkml.kernel.org/r/20220715150521.18165-3-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Add MEMORY_DEVICE_COHERENT for coherent device memory
mapping", v9.

This patch series introduces MEMORY_DEVICE_COHERENT, a type of memory
owned by a device that can be mapped into CPU page tables like
MEMORY_DEVICE_GENERIC and can also be migrated like MEMORY_DEVICE_PRIVATE.

This patch series is mostly self-contained except for a few places where
it needs to update other subsystems to handle the new memory type.

System stability and performance are not affected according to our ongoing
testing, including xfstests.

How it works: The system BIOS advertises the GPU device memory (aka VRAM)
as SPM (special purpose memory) in the UEFI system address map.

The amdgpu driver registers the memory with devmap as
MEMORY_DEVICE_COHERENT using devm_memremap_pages.  The initial user for
this hardware page migration capability is the Frontier supercomputer
project.  This functionality is not AMD-specific.  We expect other GPU
vendors to find this functionality useful, and possibly other hardware
types in the future.

Our test nodes in the lab are similar to the Frontier configuration, with
.5 TB of system memory plus 256 GB of device memory split across 4 GPUs,
all in a single coherent address space.  Page migration is expected to
improve application efficiency significantly.  We will report empirical
results as they become available.

Coherent device type pages at gup are now migrated back to system memory
if they are being pinned long-term (FOLL_LONGTERM).  The reason is, that
long-term pinning would interfere with the device memory manager owning
the device-coherent pages (e.g.  evictions in TTM).  These series
incorporate Alistair Popple patches to do this migration from
pin_user_pages() calls.  hmm_gup_test has been added to hmm-test to test
different get user pages calls.

This series includes handling of device-managed anonymous pages returned
by vm_normal_pages.  Although they behave like normal pages for purposes
of mapping in CPU page tables and for COW, they do not support LRU lists,
NUMA migration or THP.

We also introduced a FOLL_LRU flag that adds the same behaviour to
follow_page and related APIs, to allow callers to specify that they expect
to put pages on an LRU list.


This patch (of 14):

is_pinnable_page() and folio_is_pinnable() are renamed to
is_longterm_pinnable_page() and folio_is_longterm_pinnable() respectively.
These functions are used in the FOLL_LONGTERM flag context.

Link: https://lkml.kernel.org/r/20220715150521.18165-1-alex.sierra@amd.com
Link: https://lkml.kernel.org/r/20220715150521.18165-2-alex.sierra@amd.comSigned-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add "protected_keys" tests to "run_vmtests.sh" would help run all VM
related tests from a single shell script.

[kalpana.shetty@amd.com: Shuah Khan's review comments incorporated, added -x executable check]
  Link: https://lkml.kernel.org/r/20220617202931.357-1-kalpana.shetty@amd.com
Link: https://lkml.kernel.org/r/20220610090704.296-1-kalpana.shetty@amd.com
Link: https://lkml.kernel.org/r/20220531102556.388-1-kalpana.shetty@amd.comSigned-off-by: Kalpana Shetty <kalpana.shetty@amd.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

damon_lru_sort_init() returns an error when damon_select_ops() fails
without freeing 'ctx' which allocated before.  This commit fixes the
potential memory leak by freeing 'ctx' under the situation.

Link: https://lkml.kernel.org/r/20220714170458.49727-1-sj@kernel.org
Fixes: 40e983cc ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The test va_128TBswitch.c expects to be able to pass mmap an address hint
and length that cross the address 1<<47.  On x86_64, this is not possible
without 5-level page tables, so the test fails.

The test is already only run on 64-bit powerpc and x86_64 archs, but this
patch adds an additional check on x86_64 that skips the test if
PG_TABLE_LEVELS < 5.  There is precedent for checking /proc/config.gz in
selftests, e.g.  in selftests/firmware.

Running the tests produces the desired output:

sudo make -C tools/testing/selftests TARGETS=vm run_tests
---------------------------
running ./va_128TBswitch.sh
---------------------------
./va_128TBswitch.sh: PG_TABLE_LEVELS=4, must be >= 5 to run this test
[SKIP]
-------------------------------

[adam@wowsignal.io: restrict the check to x86_64]
  Link: https://lkml.kernel.org/r/20220628163654.337600-1-adam@wowsignal.io
[adam@wowsignal.io: fix formatting issues, rename "die" to "fail"]
  Link: https://lkml.kernel.org/r/20220701163030.415735-1-adam@wowsignal.io
Link: https://lkml.kernel.org/r/20220627163912.5581-1-adam@wowsignal.ioSigned-off-by: Adam Sindelar <adam@wowsignal.io>
Cc: Adam Sindelar <ats@fb.com>
Cc: David Vernet <void@manifault.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Transhuge swapcaches won't be freed in __collapse_huge_page_copy().  It's
because release_pte_page() is not called for these pages and thus
free_page_and_swap_cache can't grab the page lock.  These pages won't be
freed from swap cache even if we are the only user until next time
reclaim.  It shouldn't hurt indeed, but we could try to free these pages
to save more memory for system.

Link: https://lkml.kernel.org/r/20220625092816.4856-8-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The return value of khugepaged_add_pte_mapped_thp() is always 0 and also
ignored.  Remove it to clean up the code.

Link: https://lkml.kernel.org/r/20220625092816.4856-7-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use helper macro __ATTR_RW to define the khugepaged attributes.  Minor
readability improvement.

Link: https://lkml.kernel.org/r/20220625092816.4856-6-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nr_none is always 0 for non-shmem case because the page can be read from
the backend store.  So when nr_none !  = 0, it must be in is_shmem case. 
Also only adjust the nrpages and uncharge shmem when nr_none != 0 to save
cpu cycles.

Link: https://lkml.kernel.org/r/20220625092816.4856-5-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix some typos and tweak the code to meet codestyle.  No functional change
intended.

Link: https://lkml.kernel.org/r/20220625092816.4856-4-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When do_swap_page returns VM_FAULT_RETRY, we do not retry here and thus
swap entry will remain in pagetable.  This will result in later failure. 
So stop swapping in pages in this case to save cpu cycles.  As A further
optimization, mmap_lock is released when __collapse_huge_page_swapin()
fails to avoid relocking mmap_lock.  And "swapped_in++" is moved after
error handling to make it more accurate.

Link: https://lkml.kernel.org/r/20220625092816.4856-3-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "A few cleanup patches for khugepaged", v2.

This series contains a few cleaup patches to remove unneeded return value,
use helper macro, fix typos and so on.  More details can be found in the
respective changelogs.


This patch (of 7):

If we reach here, khugepaged_scan_mm_slot() has already made sure that
hugepage is enabled for shmem, via its call to hugepage_vma_check(). 
Remove this duplicated check.

Link: https://lkml.kernel.org/r/20220625092816.4856-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220625092816.4856-2-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

there is an unexpected word 'a' in the comments that need to be dropped

Link: https://lkml.kernel.org/r/24fbdae3.c86.1819a0f31b9.Coremail.chenxuebing@jari.cnSigned-off-by: XueBing Chen <chenxuebing@jari.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit e5251fd4 ("mm/hugetlb: introduce set_huge_swap_pte_at()
helper") add set_huge_swap_pte_at() to handle swap entries on
architectures that support hugepages consisting of contiguous ptes.  And
currently the set_huge_swap_pte_at() is only overridden by arm64.

set_huge_swap_pte_at() provide a sz parameter to help determine the number
of entries to be updated.  But in fact, all hugetlb swap entries contain
pfn information, so we can find the corresponding folio through the pfn
recorded in the swap entry, then the folio_size() is the number of entries
that need to be updated.

And considering that users will easily cause bugs by ignoring the
difference between set_huge_swap_pte_at() and set_huge_pte_at().  Let's
handle swap entries in set_huge_pte_at() and remove the
set_huge_swap_pte_at(), then we can call set_huge_pte_at() anywhere, which
simplifies our coding.

Link: https://lkml.kernel.org/r/20220626145717.53572-1-zhengqi.arch@bytedance.comSigned-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Not all systems use swap, so estimating available memory would help to
prevent swapping or OOM of system that not use swap.

And we need to reserve some page cache to prevent swapping or thrashing. 
If somebody is accessing the pages in pagecache, and if too much would be
freed, most accesses might mean reading data from disk, i.e.  thrashing.

Link: https://lkml.kernel.org/r/20220623020833.972979-1-yang.yang29@zte.com.cnSigned-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Always use crypto_has_comp() so that crypto can lookup module, call
usermodhelper to load the modules, wait for usermodhelper to finish and so
on.  Otherwise crypto will do all of these steps under CPU hot-plug lock
and this looks like too much stuff to handle under the CPU hot-plug lock. 
Besides this can end up in a deadlock when usermodhelper triggers a code
path that attempts to lock the CPU hot-plug lock, that zram already holds.

An example of such deadlock:

- path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto
  and waits for modprobe to finish

disksize_store
 zcomp_create
  __cpuhp_state_add_instance
   __cpuhp_state_add_instance_cpuslocked
    zcomp_cpu_up_prepare
     crypto_alloc_base
      crypto_alg_mod_lookup
       call_usermodehelper_exec
        wait_for_completion_killable
         do_wait_for_common
          schedule

- path B. async work kthread that brings in scsi device. It wants to
  register CPUHP states at some point, and it needs the CPU hot-plug
  lock for that, which is owned by zram.

async_run_entry_fn
 scsi_probe_and_add_lun
  scsi_mq_alloc_queue
   blk_mq_init_queue
    blk_mq_init_allocated_queue
     blk_mq_realloc_hw_ctxs
      __cpuhp_state_add_instance
       __cpuhp_state_add_instance_cpuslocked
        mutex_lock
         schedule

- path C. modprobe sleeps, waiting for all aync works to finish.

load_module
 do_init_module
  async_synchronize_full
   async_synchronize_cookie_domain
    schedule

[senozhatsky@chromium.org: add comment]
  Link: https://lkml.kernel.org/r/20220624060606.1014474-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20220622023501.517125-1-senozhatsky@chromium.orgSigned-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Comments that mention mem_hotplug_end() are confusing as there is no
function called mem_hotplug_end().  Fix them by replacing all the
occurences of mem_hotplug_end() in the comments with mem_hotplug_done().

[akpm@linux-foundation.org: grammatical fixes]
Link: https://lkml.kernel.org/r/20220620071516.1286101-1-p76091292@gs.ncku.edu.twSigned-off-by: Yun-Ze Li <p76091292@gs.ncku.edu.tw>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pss is the sum of the sizes of clean and dirty private pages, and the
proportional sizes of clean and dirty shared pages:

 Private = Private_Dirty + Private_Clean
 Shared_Proportional = Shared_Dirty_Proportional + Shared_Clean_Proportional
 Pss = Private + Shared_Proportional

The Shared*Proportional fields are not present in smaps, so it is not
always possible to determine how much of the Pss is from dirty pages and
how much is from clean pages.  This information can be useful for
measuring memory usage for the purpose of optimisation, since clean pages
can usually be discarded by the kernel immediately while dirty pages
cannot.

The smaps routines in the kernel already have access to this data, so add
a Pss_Dirty to show it to userspace.  Pss_Clean is not added since it can
be calculated from Pss and Pss_Dirty.

Link: https://lkml.kernel.org/r/20220620081251.2928103-1-vincent.whitchurch@axis.comSigned-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>