- 05 Nov, 2019 33 commits
-
-
Shawn Tu authored
Add a V4L2 sub-device driver for Hynix Hi-556 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies] Signed-off-by:
Shawn Tu <shawnx.tu@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Fabio Estevam authored
Currently v4l2-compliance tool returns the following output: Compliance test for imx-media-captu device /dev/video0: Driver Info: Driver name : imx-media-captu Card type : imx-media-capture ... The driver name string is limited to 16 characters, so provide a shorter name so that we can have a better output. While at it, use the same shorter name for driver and card. Signed-off-by:Fabio Estevam <festevam@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Cristiane Naves authored
Bool tests don't need comparisons. Issue found by coccicheck. Signed-off-by:
Cristiane Naves <cristianenavescardoso09@gmail.com> Signed-off-by:
-
Philipp Zabel authored
The number of components are only set, and never used. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
The R-Car Gen2 per-board settings apply to RZ/G1, too. Fixes: 1d14a5ea ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
The official name is "R-Car M3-N", not "R-Car M3N". Fixes: 4e8c120d ("media: fdp1: Support M3N and E3 platforms") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Andy Shevchenko authored
Replace F* word with something less offensive. [hverkuil: dropped 'Fixes: 1da177e4 ("Linux-2.6.12-rc2")' tag since nothing was broken] Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Lucas Stach authored
The kernel driver never touches the decoded buffers with the CPU. All accesses are either done by hardware DMA masters or userspace mapping the buffers. This means we don't need a kernel virtual address mapping for those buffers at all. As those buffers are usually quite large, we can save a good deal of kernel vmalloc space by requesting to not have a kernel mapping set up for them. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
The BIT decoder picture run temporarily locks the bitstream mutex while the coda device mutex is locked, to refill the bitstream ring buffer. Consequently, the decoder start command, which locks both mutexes when flushing the bitstream ring buffer, must lock the coda device mutex first as well, to avoid an ABBA deadlock. Fixes: e7fd9584 ("media: coda: flush bitstream ring buffer on decoder restart") Signed-off-by:
-
Vandana BN authored
v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of the v4l2_pix_format structure to default values.This was missing in v4l_g_fmt, which would lead to failures in v4l2-compliance tests. Signed-off-by:
Vandana BN <bnvandana@gmail.com> Signed-off-by:
-
Janusz Krzysztofik authored
Commit a8fa5507 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()") and commit 374d62e7 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") introduced a few local functions, unfortunately with arguments of type __u32, reserved for use in Linux uAPI. Use u32 instead. Suggested-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by:
-
Seung-Woo Kim authored
>From isp_video_release(), &isp->video_lock is held and subsequent vb2_fop_release() tries to lock vdev->lock which is same with the previous one. Replace vb2_fop_release() with _vb2_fop_release() to fix the recursive locking. Fixes: 1380f575 ("[media] videobuf2: Add missing lock held on vb2_fop_release") Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Kangjie Lu authored
"f->fmt.sdr.reserved" is uninitialized. As other peer drivers like msi2500 and airspy do, the fix initializes it to avoid memory disclosures. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Biju Das authored
Add the MIPI CSI-2 driver support for RZ/G2N(R8A774B1) SoC. The CSI-2 module of RZ/G2N is similar to R-Car M3-N. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
-
Biju Das authored
Add the SoC specific information for RZ/G2N(R8A774B1) SoC. The VIN module of RZ/G2N is similar to R-Car M3-N. Signed-off-by:
-
Biju Das authored
Add the compatible string for RZ/G2N (R8A774B1) to the list of supported SoCs. Signed-off-by:
-
Biju Das authored
Document support for the VIN module in the Renesas RZ/G2N (R8A774B1) SoC. Signed-off-by:
-
Niklas Söderlund authored
Most Gen3 boards can output frames in NV12 format, add support for this with a runtime check that the running hardware supports it. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Niklas Söderlund authored
Most but not all Gen3 hardware support outputting NV12, add a flag to indicate which SoCs do support it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
If a pixel format is not supported by the hardware NULL is returned by rvin_format_from_pixel() for that fourcc. Verify that the pixel format is supported using this or skip it when enumerating. Signed-off-by:
-
Johan Hovold authored
If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50c ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebb ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
zhong jiang authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array input_vals on the stack but instead make it static. Makes the object code smaller by 106 bytes. Before: text data bss dec hex filename 11744 3536 128 15408 3c30 drivers/media/i2c/vpx3220.o After: text data bss dec hex filename 11574 3600 128 15302 3bc6 drivers/media/i2c/vpx3220.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chris Paterson authored
Ramesh is now using a new email address. Update the maintainer entry for the MAX2175 SDR tuner and the Renesas R-Car DRIF drivers. Signed-off-by:
Chris Paterson <chris.paterson2@renesas.com> Acked-by:
Ramesh Shanmugasundaram <rashanmu@gmail.com> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Video drivers for Xilinx devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 10 bytes. Before: text data bss dec hex filename 20138 5196 128 25462 6376 staging/media/imx/imx7-mipi-csis.o After: text data bss dec hex filename 20032 5292 128 25452 636c staging/media/imx/imx7-mipi-csis.o (gcc version 9.2.1, amd64) Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Colin Ian King authored
Variable status is being initialized with a value that is never read and is being re-assigned a later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Dan Carpenter authored
We added two new error paths to smiapp_start_streaming(), but we can't return directly without dropping the "sensor->mutex" lock. Fixes: f8c4352c ("media: smiapp: Move binning configuration to streaming start") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bingbu Cao authored
Currently, we can build ipu3 driver code without any warnings with W=1, so the extra compiler flags in Makefile and the item in TODO file can be removed. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Bingbu Cao authored
The data type conversion of the IEFD CU inputs in ipu3 uapi is ambiguities, add some clarification to help user to understand this conversion. Signed-off-by:
-
Bingbu Cao authored
This patch add more details for the resolution change blocks It can help the developer to understand the main resolution change blocks in ImgU. [sakari.ailus@linux.intel.com: Add new files to MAINTAINERS] Signed-off-by:
-
- 24 Oct, 2019 7 commits
-
-
Jernej Skrabec authored
Allwinner H3 SoC contains deinterlace unit, which has several modes of operation - bypass, weave, bob and mixed (advanced) mode. I don't know how mixed mode works, but according to Allwinner it gives best results, so they use it exclusively. Currently this mode is also hardcoded here. For each interleaved frame queued, this driver produces 2 deinterlaced frames. Deinterlaced frames are based on 2 consequtive output buffers, except for the first 2, where same output buffer is given to peripheral as current and previous. There is no documentation for this core, so register layout and fixed values were taken from BSP driver. I'm not sure if maximum size of the image unit is capable to process is governed by size of "flag" buffers, frequency or it really is some HW limitation. Currently driver can process full HD image in ~15ms (7.5ms for each capture buffer), which allows to process 1920x1080@60i video smoothly in real time. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> [hverkuil-cisco@xs4all.nl: add static to deinterlace_ioctl_ops] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Jernej Skrabec authored
Allwinner H3 Deinterlace core is used for deinterlacing interlaced video content. Core can also be found on some later SoCs, like H5 and R40. Acked-by:
-
Arthur Moraes do Lago authored
Add mean window size parameter for debayer filter as a control in vimc-debayer. vimc-debayer was patched to allow changing mean window parameter of the filter without needing to reload the driver. The parameter can now be set using a v4l2-ctl control(mean_window_size). Co-developed-by:
Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by:
Arthur Moraes do Lago <arthurmoraeslago@gmail.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
Since the 'struct device *dev' field exists in each of the entity structs, it can be moved to the common struct vimc_ent_devevice. It is then used to replace 'pr_err' with 'dev_err' in the streamer code. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
since the pads array is of known small size, there is no reason to allocate it separately. Instead, it is embedded in the entity struct. This also conforms to the media controller doc: 'Most drivers will embed the pads array in a driver-specific structure, avoiding dynamic allocation.' Signed-off-by:
-
Dafna Hirschfeld authored
the struct vimc_platform_data is not used anymore and can be removed. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'vimc_pipeline_s_stream' is not used and can be removed. Signed-off-by:
-
