- 01 Mar, 2014 8 commits
-
-
Dylan Reid authored
Passing the max slots and power save arguments to codec_create will allow for its reuse by an hda_platform driver. It makes the function independent of the module params in hda_intel and ready to move to hda_shared in a following commit. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
Keeping a pointer to the jackpoll_ms array in the chip will allow azx_codec_create to be shared between hda_intel and hda_platform drivers. Also modify get_jackpoll_ms to make the jackpoll_ms member optional, this way a platform driver can leave it out if it's not needed. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
Although the code was updated last year the "#if 0" surrounding it dates back to the original git commit. The function will be moved to a new file, no need to carry the dead code. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
This is a PCI-only feature, but adding a callback for it in the chip structure breaks the PCI dependency in the RIRB code allowing the logic there to be re-used by the platform HDA driver. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
This removes calls to get the device via PCI from other parts of the code that will be able to be re-used by the platform driver. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
This will allow for a platform hda driver to use it as well. It removes the dependency on the module param from hda_intel, which will allow for azx_setup_periods to be shared. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
The forthcoming platform hda driver needs to override the way registers are read and written. In preparation for that, introduce a reg_ops struct that can be implemented differently by the new driver. Change the existing macros to use the new structure, and move them to hda_priv.h where they will be accessible to both PCI and platform drivers. Start with register access, but later commits will add more ops that differ between PCI and platform. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dylan Reid authored
Later commits adding support for hda platform drivers will want to use the same defines and structures. Put them in a place reachable by both hda_intel and the new platform driver. This is a mostly a direct copy with a few whitespace and comment changes to make checkpatch happy. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Feb, 2014 3 commits
-
-
David Henningsson authored
According to the HDA spec, we must write 1 to bit 15 on a CORBRP reset, read back 1, then write 0, then read back 0. This must be done while the DMA is not running. We accidentaly ended up writing back the 0 by using a writel instead of a writew to CORBWP. This caused occasional controller failure on Bay Trail hardware. [replaced error messages with dev_err() by tiwai] Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The beep input device is registered via input_register_device(), but this is called in snd_hda_attach_beep_device() where the sound devices aren't registered yet. This leads to the binding to non-existing object, thus results in failure. And, even if the binding worked (against the PCI object), it's still racy; the input device appears before the sound objects. For fixing this, register the input device properly at dev_register ops of the codec object it's bound with. Also, call snd_hda_detach_beep_device() at dev_disconnection so that it's detached at the right timing. As a bonus, since it's called in the codec's ops, we can get rid of the further call from the other codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This merges the bunch of changes over pci and usb sound drivers to convert to dev_err() and co.
-
- 27 Feb, 2014 3 commits
-
-
Takashi Iwai authored
Many HP laptops with STAC codecs have a docking station port and BIOS sets the pins for the input on the dock as a line in. Because the generic parser doesn't handle a line in pin as auto-switchable, this resulted in the manual capture source selection on these laptops. However, from the usability POV, the automatic switching is easier. This patch adds the line_in_auto_switch hint in the fixup function for these laptops. Even if no dock port is present, this should be harmless as the generic parser allows the auto-switching only in a limited situation (all three pins are located in different positions). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Just a cleanup to follow the standard coding style. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Instead of the controller, the new codec object is assigned as a parent for the hd-audio beep input devices, just like already done for PCM and hwdep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Feb, 2014 26 commits
-
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. As there are too deep indirections (e.g. ep->chip->dev->dev), a few new local macros, usb_audio_err() & co, are introduced. Also, the device numbers in some messages are dropped, as they are shown in the prefix automatically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. A couple of prints are difficult to convert with dev_err() so they are converted to pr_err() at least. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. A couple of prints are difficult to convert with dev_err() so they are converted to pr_err() at least. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Some debug prints are replaced with dev_dbg(), too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-