- 09 Feb, 2007 40 commits
-
-
James Courtier-Dutton authored
Signed-off-by:
James Courtier-Dutton <James@superbug.co.uk> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
James Courtier-Dutton authored
Signed-off-by:
-
Takashi Iwai authored
Added the (experimental) support of M-Audio Audiophile 192 board. Currently, the analog and the digital playbacks seem working fine. The inputs seem not working as far as I've tested yet. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Liam Girdwood authored
This patch suggested by Richard Purdie changes the names of some WM8731 and WM8750 mixers so that they will be recognised by some older OSS mixer apps. Changes:- o WM8731 Playback changed to Master Playback o WM8750 Out1 changed to Headphone o WM8750 Out2 changed to Speaker Signed-off-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
-
Andrew L. Neporada authored
We need to enable External Amplifier on this laptops. This patch basicly adds laptop-eapd model to ALC883 codec. Signed-off-by:
Andrew L. Neporada <nepal@asplinux.ru> Signed-off-by:
-
Takashi Iwai authored
sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_hw_params': sound/pci/rme9652/hdspm.c:3681: warning: format '%08X' expects type 'unsigned int', but argument 4 has type 'unsigned char *' sound/pci/rme9652/hdspm.c:3692: warning: format '%08X' expects type 'unsigned int', but argument 4 has type 'unsigned char *' Signed-off-by:
-
Takashi Iwai authored
Add a proper model (3stack) for ASUS M2N-MX with AD1986A codec. Signed-off-by:
-
Clemens Ladisch authored
Load the ASSP codes using request_firmware(), if possible, instead of using the built-in blobs. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
Load the DSP code using request_firmware(), if possible, instead of using the built-in blob. Signed-off-by:
-
Clemens Ladisch authored
Load the YSS225 register initialization data using request_firmware(), if possible, instead of using the built-in data blob. Signed-off-by:
-
Clemens Ladisch authored
Instead of using a somewhat algorithmic approach of initializing the YSS225's registers, just use a simple series of port/value pairs. This makes it easier to later replace or entirely remove the register data blob. Signed-off-by:
-
Clemens Ladisch authored
Load the CSP programs using request_firmware(), if possible, instead of using the built-in firmware blobs. Signed-off-by:
-
Hubert Kahlert authored
This patch by Frank Mandarino and Hubert Kahlert fixes a bug in the AT91 SSC (i2s) shutdown code that would erroneously disable other AT91 peripheral clocks. Signed-off-by:
Hubert Kahlert <hkahlert@hk-datentechnik.de> Signed-off-by:
Frank Mandarino <fmandarino@endrelia.com> Signed-off-by:
-
Matt Porter authored
Adds support for digital microphone pin widgets on SigmaTel codecs. Enables support only on the 9205 codecs for now. Signed-off-by:
Matt Porter <mporter@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
Add a proper model entry (3stack) for Lenovo A60 desktop with AD1986a codec to fix noise problems. Signed-off-by:
-
Takashi Iwai authored
Don't enable power-saving mode on drivers that don't support it. The supporting drivers set AC97_SCAP_POWER_SAVE to scaps at creation of ac97 instance. Currently enable on the following drivers: intel8x0, intel8x0m, atiixp, atiixp-modem, via82xx and via82xx-modem. Also, a bit clean up of power-saving stuff: - Don't create an own workq - Remove superfluous ifdefs Signed-off-by:
-
Mariusz Domanski authored
This patch adds support for Asus laptops (for example: Asus A6Rp-AP002). Signed-off-by:
Mariusz Domanski <mariook@wp.pl> Signed-off-by:
-
Liam Girdwood authored
This patch adds support for the DAI BCLK to be generated by multiplying Rate * Channels * Word Size (RCW). This now gives 3 options for BCLK clocking and synchronisation :- 1. BCLK = Rate * x 2. BCLK = MCLK / x 3. BCLK = Rate * Chn * Word Size. (New) Changes:- o Add support for RCW generation of BCLK o Update Documentation to include RCW. o Update DAI documentation for label = value DAI modes. o Add RCW support to wm8731, wm8750 and pxa2xx-i2s drivers. Signed-off-by:
-
Frank Mandarino authored
This patch by Frank Mandarino updates the AT91RM9200 I2S DAI audio modes as follows:- o fixes a typo in the 16k mode o removes experimental 24k mode o adds a 32k mode. Signed-off-by:
-
Remy Bruno authored
Add DDS register support for RME9632 rev >= 152. This register sets the sample rate for these cards and is required in addition to the standard control register. It corresponds to a quartz divisor. Signed-off-by:
Remy Bruno <remy.bruno@trinnov.com> Signed-off-by:
-
Kailang Yang authored
Changes from Realtek driver: - New models hippo and hippo_1 for ALC262 - New models tagra-dig and tagra-2ch-dig for ALC883 - New id for ALC660 codec chip Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Tobin Davis authored
This patch adds support for Toshiba laptops. Code is from RealTek's alsa-driver-1.0.12-4.05b tree. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Liam Girdwood authored
This patch fixes some build warnings in soc-core.c Changes:- o Check the return value of soc_ac97_dev_register() o Check return value of calls to device_create_file() Signed-off-by:
Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Jerome Demange authored
Signed-off-by:
Jerome Demange <jdemange@cict.fr> Signed-off-by:
-
Remy Bruno authored
Add support for AES32. Difference between MADI and AES32 is done through revision. Master support is not finished for now (RME so-called DDS feature is not supported yet) Signed-off-by:
-
Takashi Iwai authored
Remove trailing whitespaces from soc/* files added by the conversion to C99-style initialization. Signed-off-by:
-
Liam Girdwood authored
This patch fixes a build failure when ASoC debug is enabled. Signed-off-by:
-
Takashi Iwai authored
Added a missing comma in the medion patch. Signed-off-by:
-
Liam Girdwood authored
This patch suggested by Takashi changes the DAI capabilities definitions in pxa-i2s.c, at91rm9200-i2s.c, wm8731.c, wm8750.c and wm9712.c to use a label = value style. Signed-off-by:
-
Tobin Davis authored
This patch adds audio support for Medion's line of laptops, based on code shipped with the laptops. Microphone support is still being explored. Signed-off-by:
-
Liam Girdwood authored
This patch builds ASoC pxa2xx support for Corgi, Spitz, Tosa and Poodle Zaurus machines. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C5600 (Poodle) machine. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C6000 (Tosa) machine. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Dirk Opfer <Dirk@Opfer-Online.de> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C1000/SL-C3x00 (Akita/Spitz) machines. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C7x0/C860 (Corgi) machines. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Graeme Gregory <dp@xora.org.uk> Signed-off-by:
-
Liam Girdwood authored
This patch adds pxa2xx AC97 ASoC audio support. It's based on sound/arm/pxa-ac97 by Nicolas Pitre with the following differences. o Modified driver structure to use ASoC core PCM callbacks. o Removed AC97 configuration function (all handled in ASoC core) o Added and exported ASoC DAI configuration table. o Added DMA support for AUX DAC and Mic ADC o Separated out AC97 reset into cold and warm reset functions. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Nicolas Pitre <nico@cam.org> Signed-off-by:
-
Liam Girdwood authored
This patch adds pxa2xx I2S ASoC audio support. Features:- o Supports playback/capture o 16 bit PCM o 8k - 96k sample rates o Supports master and slave mode. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Liam Girdwood authored
This patch adds pxa2xx ASoC DMA audio support. It's based on sound/arm/pxa-pcm.c by Nicolas Pitre with the following differences. o Modified driver structure to use ASoC core PCM callbacks and data structures. o Registration with ASoC core. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Clemens Ladisch authored
Load the DSP and controller microcode using request_firmware(), if possible, instead of using the built-in firmware. Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
-
