- 22 Jul, 2014 2 commits
-
-
Paul Mackerras authored
This fixes some bugs in emulate_step(). First, the setting of the carry bit for the arithmetic right-shift instructions was not correct on 64-bit machines because we were masking with a mask of type int rather than unsigned long. Secondly, the sld (shift left doubleword) instruction was using the wrong instruction field for the register containing the shift count. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Joel Stanley authored
These processors do not currently support doorbell IPIs, so remove them from the feature list if we are at DD 1.xx for the 0x004d part. This fixes a regression caused by d4e58e59 (powerpc/powernv: Enable POWER8 doorbell IPIs). With that patch the kernel would hang at boot when calling smp_call_function_many, as the doorbell would not be received by the target CPUs: .smp_call_function_many+0x2bc/0x3c0 (unreliable) .on_each_cpu_mask+0x30/0x100 .cpuidle_register_driver+0x158/0x1a0 .cpuidle_register+0x2c/0x110 .powernv_processor_idle_init+0x23c/0x2c0 .do_one_initcall+0xd4/0x260 .kernel_init_freeable+0x25c/0x33c .kernel_init+0x1c/0x120 .ret_from_kernel_thread+0x58/0x7c Fixes: d4e58e59 (powerpc/powernv: Enable POWER8 doorbell IPIs) Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 Jul, 2014 8 commits
-
-
Anton Blanchard authored
We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Cc: <stable@vger.kernel.org> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Guenter Roeck authored
powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Joel Stanley authored
On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e ("powerpc/perf: Power8 PMU support") Cc: stable@vger.kernel.org Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Joel Stanley authored
Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Cc: stable@vger.kernel.org Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Joel Stanley authored
These two registers are already saved in the block above. Aside from being unnecessary, by the time we get down to the second save location r8 no longer contains MMCR2, so we are clobbering the saved value with PMC5. MMCR2 primarily consists of counter freeze bits. So restoring the value of PMC5 into MMCR2 will most likely have the effect of freezing counters. Fixes: 72cde5a8 ("KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8") Cc: stable@vger.kernel.org Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
Paul Mackerras <paulus@samba.org> Reviewed-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Preeti U Murthy authored
Commit 8d6f7c5a: "powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()" added code that prevents cpus from checking for pending interrupts just before entering sleep state, which is wrong. These interrupts are delivered during the soft irq disabled state of the cpu. A cpu cannot enter any idle state with pending interrupts because they will never be serviced until the next time the cpu is woken up by some other interrupt. Its only then that the pending interrupts are replayed. This can result in device timeouts or warnings about this cpu being stuck. This patch fixes ths issue by ensuring that cpus check for pending interrupts just before entering any idle state as long as they are not in the path of split core operations. Signed-off-by:
Preeti U Murthy <preeti@linux.vnet.ibm.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
In fb5a5157 "powerpc: Remove platforms/wsp and associated pieces", we removed the last user of MMU_FTRS_A2. So remove it. MMU_FTRS_A2 was the last user of MMU_FTR_TYPE_3E, so remove it also. This leaves some unreachable code in mmu_context_nohash.c, so remove that also. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Commit 046d662f "coredump: make core dump functionality optional" made the coredump optional, but didn't update the spufs code that depends on it. That leads to build errors such as: arch/powerpc/platforms/built-in.o: In function `.spufs_arch_write_note': coredump.c:(.text+0x22cd4): undefined reference to `.dump_emit' coredump.c:(.text+0x22cf4): undefined reference to `.dump_emit' coredump.c:(.text+0x22d0c): undefined reference to `.dump_align' coredump.c:(.text+0x22d48): undefined reference to `.dump_emit' coredump.c:(.text+0x22e7c): undefined reference to `.dump_skip' Fix it by adding some ifdefs in the cell code. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 25 Jun, 2014 3 commits
-
-
Scott Wood authored
Commit 59a53afe "powerpc: Don't setup CPUs with bad status" broke ePAPR SMP booting. ePAPR says that CPUs that aren't presently running shall have status of disabled, with enable-method being used to determine whether the CPU can be enabled. Fix by checking for spin-table, which is currently the only supported enable-method. Signed-off-by:
Scott Wood <scottwood@freescale.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Emil Medve <Emilian.Medve@Freescale.com> Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Laurent Dufour authored
The commit 71ec7c55 introduced the magic symbol ".TOC." for ELFv2 ABI. This symbol is built manually and has no CRC value computed. A zero value is put in the CRC section to avoid modpost complaining about a missing CRC. Unfortunately, this breaks the kernel module loading when the kernel is relocated (kdump case for instance) because of the relocation applied to the kcrctab values. This patch compute a CRC value for the TOC symbol which will match the one compute by the kernel when it is relocated - aka '0 - relocate_start' done in maybe_relocated called by check_version (module.c). Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
In commit 27f44888 "Add OPAL takeover from PowerVM" we added support for "takeover" on OPAL v1 machines. This was a mode of operation where we would boot under pHyp, and query for the presence of OPAL. If detected we would then do a special sequence to take over the machine, and the kernel would end up running in hypervisor mode. OPAL v1 was never a supported product, and was never shipped outside IBM. As far as we know no one is still using it. Newer versions of OPAL do not use the takeover mechanism. Although the query for OPAL should be harmless on machines with newer OPAL, we have seen a machine where it causes a crash in Open Firmware. The code in early_init_devtree() to copy boot_command_line into cmd_line was added in commit 817c21ad "Get kernel command line accross OPAL takeover", and AFAIK is only used by takeover, so should also be removed. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 Jun, 2014 13 commits
-
-
Catalin Marinas authored
The DART table allocation is registered to kmemleak via the memblock_alloc_base() call. However, the DART table is later unmapped and dart_tablebase VA no longer accessible. This patch tells kmemleak not to scan this block and avoid an unhandled paging request. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
This gives us standardised success/failure output and also handles killing the test if it runs forever (2 minutes). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Rickard Strandqvist authored
This variable is of the wrong type, everywhere it is used it should be an unsigned int rather than a int. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
In commit 721aeaa9 "Build little endian ppc64 kernel with ABIv2", we missed some updates required in the kprobes code to make jprobes work when the kernel is built with ABI v2. Firstly update arch_deref_entry_point() to do the right thing. Now that we have added ppc_global_function_entry() we can just always use that, it will do the right thing for 32 & 64 bit and ABI v1 & v2. Secondly we need to update the code that sets up the register state before calling the jprobe handler. On ABI v1 we setup r2 to hold the TOC, on ABI v2 we need to populate r12 with the function entry point address. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
The printks() in our ftrace code have no prefix, so they appear on the console with very little context, eg: Branch out of range Use pr_fmt() & pr_err() to add a prefix. While we're at it, collapse a few split lines that don't need to be, and add a missing newline to one message. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
There is a bug in the handling of the function entry when we are nopping out a branch from a module in ftrace. We compare the result of module_trampoline_target() with the value of ppc_function_entry(), and expect them to be true. But they never will be. module_trampoline_target() will always return the global entry point of the function, whereas ppc_function_entry() will always return the local. Fix it by using the newly added ppc_global_function_entry(). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
In commit 24a1bdc3, "Fix ABIv2 issues with __ftrace_make_call", Anton changed the logic that creates and patches the branch, and added a thinko in the check of create_branch(). create_branch() returns the instruction that was generated, so if we get zero then it succeeded. The result is we can't ftrace modules: Branch out of range WARNING: at ../kernel/trace/ftrace.c:1638 ftrace failed to modify [<d000000004ba001c>] fuse_req_init_context+0x1c/0x90 [fuse] We should probably fix patch_instruction() to do that check and make the API saner, but that's a separate patch. For now just invert the test. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
In commit 24a1bdc3, "Fix ABIv2 issues with __ftrace_make_call", Anton changed the logic that checks for the expected code sequence when patching a module. We missed the typo in the mask, 0xffff00000 should be 0xffff0000, which has the effect of making the test always true. That makes it impossible to ftrace against modules, eg: Unexpected call sequence: 48000008 e8410018 WARNING: at ../kernel/trace/ftrace.c:1638 ftrace failed to modify [<d000000007cf001c>] rng_dev_open+0x1c/0x70 [rng_core] Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
ABIv2 has the concept of a global and local entry point to a function. In most cases we are interested in the local entry point, and so that is what ppc_function_entry() returns. However we have a case in the ftrace code where we want the global entry point, and there may be other places we need it too. Rather than special casing each, add an accessor. For ABIv1 and 32-bit there is only a single entry point, so we return that. That means it's safe for the caller to use this without also checking the ABI version. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Rasmus Villemoes authored
A closing brace followed by "if" is almost certainly a mistake. Maybe "else if" was meant, but in this case it doesn't really matter. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
The generic code uses gcc built-ins which work fine so there's no benefit in implementing our own anymore. We can't completely remove the ld/st_le* functions as some historical cruft still uses them, but that's next on the radar Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
We have some compile-time disabled debug code in signal_xx.c. It's from some ancient time BG, almost certainly part of the original port, given the very similar code on other arches. The show_unhandled_signal logic, added in d0c3d534 (2.6.24) is cleaner and prints more useful information, so drop the debug code. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
In arch/powerpc/kernel/iomap.c, lots of IO reading accessors missed to check EEH error as Ben pointed. The patch fixes it. For the writing accessors, we change the called functions only for making them look similar to the reading counterparts. Suggested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 Jun, 2014 5 commits
-
-
Benjamin Herrenschmidt authored
This reverts commit e1edf18b. This patch was a misguided attempt at fixing offb for LE ppc64 kernels on BE qemu but is just wrong ... it breaks real LE/LE setups, LE with real HW, and existing mixed endian systems that did the fight thing with the appropriate device-tree property. Bad reviewing on my part, sorry. The right fix is to either make qemu change its endian when the guest changes endian (working on that) or to use the existing foreign endian support. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13+] ---
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix checksumming regressions, from Tom Herbert. 2) Undo unintentional permissions changes for SCTP rto_alpha and rto_beta sysfs knobs, from Denial Borkmann. 3) VXLAN, like other IP tunnels, should advertize it's encapsulation size using dev->needed_headroom instead of dev->hard_header_len. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: sctp: fix permissions for rto_alpha and rto_beta knobs vxlan: Checksum fixes net: add skb_pop_rcv_encapsulation udp: call __skb_checksum_complete when doing full checksum net: Fix save software checksum complete net: Fix GSO constants to match NETIF flags udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup vxlan: use dev->needed_headroom instead of dev->hard_header_len MAINTAINERS: update cxgb4 maintainer
-
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
-
git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds authored
Pull NVMe update from Matthew Wilcox: "Mostly bugfixes again for the NVMe driver. I'd like to call out the exported tracepoint in the block layer; I believe Keith has cleared this with Jens. We've had a few reports from people who're really pounding on NVMe devices at scale, hence the timeout changes (and new module parameters), hotplug cpu deadlock, tracepoints, and minor performance tweaks" [ Jens hadn't seen that tracepoint thing, but is ok with it - it will end up going away when mq conversion happens ] * git://git.infradead.org/users/willy/linux-nvme: (22 commits) NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. NVMe: Use Log Page constants in SCSI emulation NVMe: Define Log Page constants NVMe: Fix hot cpu notification dead lock NVMe: Rename io_timeout to nvme_io_timeout NVMe: Use last bytes of f/w rev SCSI Inquiry NVMe: Adhere to request queue block accounting enable/disable NVMe: Fix nvme get/put queue semantics NVMe: Delete NVME_GET_FEAT_TEMP_THRESH NVMe: Make admin timeout a module parameter NVMe: Make iod bio timeout a parameter NVMe: Prevent possible NULL pointer dereference NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD) NVMe: Update data structures for NVMe 1.2 NVMe: Enable BUILD_BUG_ON checks NVMe: Update namespace and controller identify structures to the 1.1a spec NVMe: Flush with data support NVMe: Configure support for block flush NVMe: Add tracepoints NVMe: Protect against badly formatted CQEs ...
-
- 15 Jun, 2014 9 commits
-
-
Daniel Borkmann authored
Commit 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== Fixes related to some recent checksum modifications. - Fix GSO constants to match NETIF flags - Fix logic in saving checksum complete in __skb_checksum_complete - Call __skb_checksum_complete from UDP if we are checksumming over whole packet in order to save checksum. - Fixes to VXLAN to work correctly with checksum complete ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
This function is used by UDP encapsulation protocols in RX when crossing encapsulation boundary. If ip_summed is set to CHECKSUM_UNNECESSARY and encapsulation is not set, change to CHECKSUM_NONE since the checksum has not been validated within the encapsulation. Clears csum_valid by the same rationale. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Geert reported issues regarding checksum complete and UDP. The logic introduced in commit 7e3cead5 ("net: Save software checksum complete") is not correct. This patch: 1) Restores code in __skb_checksum_complete_header except for setting CHECKSUM_UNNECESSARY. This function may be calculating checksum on something less than skb->len. 2) Adds saving checksum to __skb_checksum_complete. The full packet checksum 0..skb->len is calculated without adding in pseudo header. This value is saved in skb->csum and then the pseudo header is added to that to derive the checksum for validation. 3) In both __skb_checksum_complete_header and __skb_checksum_complete, set skb->csum_valid to whether checksum of zero was computed. This allows skb_csum_unnecessary to return true without changing to CHECKSUM_UNNECESSARY which was done previously. 4) Copy new csum related bits in __copy_skb_header. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by:
Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is just a couple of drivers (hpsa and lpfc) that got left out for further testing in linux-next. We also have one fix to a prior submission (qla2xxx sparse)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch lpfc: Update lpfc version to driver version 10.2.8001.0 lpfc: Fix ExpressLane priority setup lpfc: mark old devices as obsolete lpfc: Fix for initializing RRQ bitmap lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries lpfc: Update lpfc version to driver version 10.2.8000.0 lpfc: Update Copyright on changed files from 8.3.45 patches lpfc: Update Copyright on changed files lpfc: Fixed locking for scsi task management commands lpfc: Convert runtime references to old xlane cfg param to fof cfg param lpfc: Fix FW dump using sysfs lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock lpfc: Fixed kernel panic in lpfc_abort_handler lpfc: Fix locking for postbufq when freeing lpfc: Fix locking for lpfc_hba_down_post lpfc: Fix dynamic transitions of FirstBurst from on to off hpsa: fix handling of hpsa_volume_offline return value hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id hpsa: remove messages about volume status VPD inquiry page not supported ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull more btrfs updates from Chris Mason: "This has a few fixes since our last pull and a new ioctl for doing btree searches from userland. It's very similar to the existing ioctl, but lets us return larger items back down to the app" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix error handling in create_pending_snapshot btrfs: fix use of uninit "ret" in end_extent_writepage() btrfs: free ulist in qgroup_shared_accounting() error path Btrfs: fix qgroups sanity test crash or hang btrfs: prevent RCU warning when dereferencing radix tree slot Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting btrfs: new ioctl TREE_SEARCH_V2 btrfs: tree_search, search_ioctl: direct copy to userspace btrfs: new function read_extent_buffer_to_user btrfs: tree_search, copy_to_sk: return needed size on EOVERFLOW btrfs: tree_search, copy_to_sk: return EOVERFLOW for too small buffer btrfs: tree_search, search_ioctl: accept varying buffer btrfs: tree_search: eliminate redundant nr_items check
-