- 12 Apr, 2017 38 commits
-
-
James Hogan authored
commit fd40eee1 upstream. The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP to decide how far to rewind the source pointer. There is a special case for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0 even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ which is conditional upon the Z condition flag, but the AND instruction which masked the TXStatus.LSM_STEP field didn't set the condition flags based on the result. Fix that now by using ANDS which does set the flags, and also marking the condition codes as clobbered by the inline assembly. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Hogan authored
commit 563ddc10 upstream. Currently we try to zero the destination for a failed read from userland in fixup code in the usercopy.c macros. The rest of the destination buffer is then zeroed from __copy_user_zeroing(), which is used for both copy_from_user() and __copy_from_user(). Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0 before the fixup code entry labels, and __copy_from_user() shouldn't even be zeroing the rest of the buffer. Move the zeroing out into copy_from_user() and rename __copy_user_zeroing() to raw_copy_from_user() since it no longer does any zeroing. This also conveniently matches the name needed for RAW_COPY_USER support in a later patch. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Hogan authored
commit fb8ea062 upstream. When copying to userland on Meta, if any faults are encountered immediately abort the copy instead of continuing on and repeatedly faulting, and worse potentially copying further bytes successfully to subsequent valid pages. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
-
James Hogan authored
commit 22572119 upstream. Fix the error checking of the alignment adjustment code in raw_copy_from_user(), which mistakenly considers it safe to skip the error check when aligning the source buffer on a 2 or 4 byte boundary. If the destination buffer was unaligned it may have started to copy using byte or word accesses, which could well be at the start of a new (valid) source page. This would result in it appearing to have copied 1 or 2 bytes at the end of the first (invalid) page rather than none at all. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit ef62a2d8 upstream. Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger copies between 5 and 16 bytes which are completely unused. Before fixing zeroing lets drop these macros so there is less to fix. Signed-off-by:
-
Arend Van Spriel authored
commit d77facb8 upstream. A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual interface is removed using call to brcmf_remove_interface(). After that the virtual interface instance has been freed and should not be referenced. Solve this by storing the nl80211 iftype in local variable, which is used in a couple of places anyway. Reported-by:
Daniel J Blueman <daniel@quora.org> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Berg authored
commit 7d65f829 upstream. When internal mac80211 TXQs aren't supported, netdev queues must always started out started even when driver queues are stopped while the interface is added. This is necessary because with the internal TXQ support netdev queues are never stopped and packet scheduling/dropping is done in mac80211. Fixes: 80a83cfc ("mac80211: skip netdev queue control with software queuing") Reported-and-tested-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Wei Yongjun authored
commit 62277de7 upstream. In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com Fixes: 6c43e554 ("ring-buffer: Add ring buffer startup selftest") Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Calvin Owens authored
commit 3dd09d5a upstream. When punching past EOF on XFS, fallocate(mode=PUNCH_HOLE|KEEP_SIZE) will round the file size up to the nearest multiple of PAGE_SIZE: calvinow@vm-disks/generic-xfs-1 ~$ dd if=/dev/urandom of=test bs=2048 count=1 calvinow@vm-disks/generic-xfs-1 ~$ stat test Size: 2048 Blocks: 8 IO Block: 4096 regular file calvinow@vm-disks/generic-xfs-1 ~$ fallocate -n -l 2048 -o 2048 -p test calvinow@vm-disks/generic-xfs-1 ~$ stat test Size: 4096 Blocks: 8 IO Block: 4096 regular file Commit 3c2bdc91 ("xfs: kill xfs_zero_remaining_bytes") replaced xfs_zero_remaining_bytes() with calls to iomap helpers. The new helpers don't enforce that [pos,offset) lies strictly on [0,i_size) when being called from xfs_free_file_space(), so by "leaking" these ranges into xfs_zero_range() we get this buggy behavior. Fix this by reintroducing the checks xfs_zero_remaining_bytes() did against i_size at the bottom of xfs_free_file_space(). Reported-by:
Aaron Gao <gzh@fb.com> Fixes: 3c2bdc91 ("xfs: kill xfs_zero_remaining_bytes") Cc: Christoph Hellwig <hch@lst.de> Cc: Brian Foster <bfoster@redhat.com> Signed-off-by:
Calvin Owens <calvinowens@fb.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Martin Brandenburg authored
commit cefdc26e upstream. Without this fix (and another to the userspace component itself described later), the kernel will be unable to process any OrangeFS requests after the userspace component is restarted (due to a crash or at the administrator's behest). The bug here is that inside orangefs_remount, the orangefs_request_mutex is locked. When the userspace component restarts while the filesystem is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device, which causes the kernel to send it a few requests aimed at synchronizing the state between the two. While this is happening the orangefs_request_mutex is locked to prevent any other requests going through. This is only half of the bugfix. The other half is in the userspace component which outright ignores(!) requests made before it considers the filesystem remounted, which is after the ioctl returns. Of course the ioctl doesn't return until after the userspace component responds to the request it ignores. The userspace component has been changed to allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status. Mike Marshall says: "I've tested this patch against the fixed userspace part. This patch is real important, I hope it can make it into 4.11... Here's what happens when the userspace daemon is restarted, without the patch: ============================================= [ INFO: possible recursive locking detected ] [ 4.10.0-00007-ge98bdb30 #1 Not tainted ] --------------------------------------------- pvfs2-client-co/29032 is trying to acquire lock: (orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs] but task is already holding lock: (orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs] CPU: 0 PID: 29032 Comm: pvfs2-client-co Not tainted 4.10.0-00007-ge98bdb30 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 Call Trace: __lock_acquire+0x7eb/0x1290 lock_acquire+0xe8/0x1d0 mutex_lock_killable_nested+0x6f/0x6e0 service_operation+0x3c7/0x7b0 [orangefs] orangefs_remount+0xea/0x150 [orangefs] dispatch_ioctl_command+0x227/0x330 [orangefs] orangefs_devreq_ioctl+0x29/0x70 [orangefs] do_vfs_ioctl+0xa3/0x6e0 SyS_ioctl+0x79/0x90" Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Acked-by:
Mike Marshall <hubcap@omnibond.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Gleb Fotengauer-Malinovskiy authored
commit 7292ae3d upstream. The latest change of asm goto support check added passing of KBUILD_CFLAGS to compiler. When these flags reference gcc plugins that are not built yet, the check fails. When one runs "make bzImage" followed by "make modules", the kernel is always built with HAVE_JUMP_LABEL disabled, while the modules are built depending on CONFIG_JUMP_LABEL. If HAVE_JUMP_LABEL macro happens to be different, modules are built with undefined references, e.g.: ERROR: "static_key_slow_inc" [net/netfilter/xt_TEE.ko] undefined! ERROR: "static_key_slow_dec" [net/netfilter/xt_TEE.ko] undefined! ERROR: "static_key_slow_dec" [net/netfilter/nft_meta.ko] undefined! ERROR: "static_key_slow_inc" [net/netfilter/nft_meta.ko] undefined! ERROR: "nf_hooks_needed" [net/netfilter/ipvs/ip_vs.ko] undefined! ERROR: "nf_hooks_needed" [net/ipv6/ipv6.ko] undefined! ERROR: "static_key_count" [net/ipv6/ipv6.ko] undefined! ERROR: "static_key_slow_inc" [net/ipv6/ipv6.ko] undefined! This change moves the check before all these references are added to KBUILD_CFLAGS. This is correct because subsequent KBUILD_CFLAGS modifications are not relevant to this check. Reported-by:
Anton V. Boyarshinov <boyarsh@altlinux.org> Fixes: 35f860f9 ("jump label: pass kbuild_cflags when checking for asm goto support") Signed-off-by:
Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
David Lin <dtwlin@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Arnd Bergmann authored
commit b334e19a upstream. In commit a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1""), I reverted another change that happened to fix a problem with old compilers, and now we get this report again with old compilers (prior to gcc-4.8) and GCOV enabled: cc1: warnings being treated as errors drivers/gpu/drm/i915/intel_ringbuffer.c: In function 'intel_ring_setup_status_page': drivers/gpu/drm/i915/intel_ringbuffer.c:438: error: 'mmio.reg' may be used uninitialized in this function At top level: >> cc1: error: unrecognized command line option "-Wno-maybe-uninitialized" The problem is that we turn off the warning conditionally in a number of places as we should, but one of them does it unconditionally. Instead, change it to call cc-disable-warning as we do elsewhere. The original patch that caused it was merged into linux-4.7, then 4.8 removed the change and 4.9 brought it back, so we probably want a backport to 4.9 once this is merged. Use a ':=' assignment instead of '=' to force the cc-disable-warning call to only be evaluated once instead of every time. Fixes: a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") Fixes: e72e2dfe ("gcov: disable -Wmaybe-uninitialized warning") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit fdad4e7a upstream. Commit c2a6bbaf (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching) added a list_empty(&adev->pnp.ids) check to find_child_checks() so as to catch situations in which the ACPI core attempts to decode _ADR for a device having a _HID too which is strictly against the spec. However, it overlooked the fact that the adev->pnp.ids list for the devices taken into account by find_child_checks() may contain device IDs set internally by the kernel, like "LNXVIDEO" (thanks to Zhang Rui for that realization), and it broke the enumeration of those devices as a result. To unbreak it, replace the overly coarse grained list_empty() check with a much more precise check against the pnp.type.platform_id flag which is only set for devices having a _HID (that's how it should be done from the start, as having both _ADR and _CID is actually permitted). Fixes: c2a6bbaf (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194889Reported-and-tested-by:
Mike <mike@mikewilson.me.uk> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 693bdaa1 upstream. If, while locating GPIOs by name, we get probe deferral, we should immediately report it to caller rather than trying to fall back to parsing unnamed GPIOs from _CRS block. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-and-Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sami Tolvanen authored
commit 86e3e83b upstream. Buffers read through dm_bufio_read() were not released in all code paths. Fixes: a739ff3f ("dm verity: add support for forward error correction") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Sami Tolvanen authored
commit f1a880a9 upstream. If the hash tree itself is sufficiently corrupt in addition to data blocks, it's possible for error correction to end up in a deep recursive loop, which eventually causes a kernel panic. This change limits the recursion to a reasonable level during a single I/O operation. Fixes: a739ff3f ("dm verity: add support for forward error correction") Signed-off-by:
-
Ross Zwisler authored
commit e11f8b7b upstream. While running generic/340 in my test setup I hit the following race. It can happen with kernels that support FS DAX PMDs, so v4.10 thru v4.11-rc5. Thread 1 Thread 2 -------- -------- dax_iomap_pmd_fault() grab_mapping_entry() spin_lock_irq() get_unlocked_mapping_entry() 'entry' is NULL, can't call lock_slot() spin_unlock_irq() radix_tree_preload() dax_iomap_pmd_fault() grab_mapping_entry() spin_lock_irq() get_unlocked_mapping_entry() ... lock_slot() spin_unlock_irq() dax_pmd_insert_mapping() <inserts a PMD mapping> spin_lock_irq() __radix_tree_insert() fails with -EEXIST <fall back to 4k fault, and die horribly when inserting a 4k entry where a PMD exists> The issue is that we have to drop mapping->tree_lock while calling radix_tree_preload(), but since we didn't have a radix tree entry to lock (unlike in the pmd_downgrade case) we have no protection against Thread 2 coming along and inserting a PMD at the same index. For 4k entries we handled this with a special-case response to -EEXIST coming from the __radix_tree_insert(), but this doesn't save us for PMDs because the -EEXIST case can also mean that we collided with a 4k entry in the radix tree at a different index, but one that is covered by our PMD range. So, correctly handle both the 4k and 2M collision cases by explicitly re-checking the radix tree for an entry at our index once we reacquire mapping->tree_lock. This patch has made it through a clean xfstests run with the current v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a loop. It used to fail within the first 10 iterations. Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
bsegall@google.com authored
commit 5402e97a upstream. In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against __TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end of a PTRACE_LISTEN, this can wake the task /after/ the check against __TASK_TRACED, but before the reset of state to TASK_TRACED. This causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup against TRACED while the task is still on the rq wake_list, corrupting it. Oleg said: "The kernel can crash or this can lead to other hard-to-debug problems. In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced() assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the contract. Obviusly it is very wrong to manipulate task->state if this task is already running, or WAKING, or it sleeps again" [akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Alexander Polakov authored
commit 1f06b81a upstream. Fixes: 11fb9989 ("mm: move most file-based accounting to the node") Link: http://lkml.kernel.org/r/1490377730.30219.2.camel@beget.ruSigned-off-by:
Alexander Polyakov <apolyakov@beget.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Jan-Marek Glogowski authored
commit 806a28ef upstream. Currently the cifs module breaks the CIFS specs on reconnect as described in http://msdn.microsoft.com/en-us/library/cc246529.aspx: "TreeId (4 bytes): Uniquely identifies the tree connect for the command. This MUST be 0 for the SMB2 TREE_CONNECT Request." Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Tested-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Arend Van Spriel authored
commit b3ef5520 upstream. We got the following use-after-free KASAN report: BUG: KASAN: use-after-free in wiphy_resume+0x591/0x5a0 [cfg80211] at addr ffff8803fc244090 Read of size 8 by task kworker/u16:24/2587 CPU: 6 PID: 2587 Comm: kworker/u16:24 Tainted: G B 4.9.13-debug+ Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.19 12/22/2016 Workqueue: events_unbound async_run_entry_fn ffff880425d4f9d8 ffffffffaeedb541 ffff88042b80ef00 ffff8803fc244088 ffff880425d4fa00 ffffffffae84d7a1 ffff880425d4fa98 ffff8803fc244080 ffff88042b80ef00 ffff880425d4fa88 ffffffffae84da3a ffffffffc141f7d9 Call Trace: [<ffffffffaeedb541>] dump_stack+0x85/0xc4 [<ffffffffae84d7a1>] kasan_object_err+0x21/0x70 [<ffffffffae84da3a>] kasan_report_error+0x1fa/0x500 [<ffffffffc141f7d9>] ? cfg80211_bss_age+0x39/0xc0 [cfg80211] [<ffffffffc141f83a>] ? cfg80211_bss_age+0x9a/0xc0 [cfg80211] [<ffffffffae48d46d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211] [<ffffffffae84def1>] __asan_report_load8_noabort+0x61/0x70 [<ffffffffc13fb100>] ? wiphy_suspend+0xbb0/0xc70 [cfg80211] [<ffffffffc13fb751>] ? wiphy_resume+0x591/0x5a0 [cfg80211] [<ffffffffc13fb751>] wiphy_resume+0x591/0x5a0 [cfg80211] [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211] [<ffffffffaf3b206e>] dpm_run_callback+0x6e/0x4f0 [<ffffffffaf3b31b2>] device_resume+0x1c2/0x670 [<ffffffffaf3b367d>] async_resume+0x1d/0x50 [<ffffffffae3ee84e>] async_run_entry_fn+0xfe/0x610 [<ffffffffae3d0666>] process_one_work+0x716/0x1a50 [<ffffffffae3d05c9>] ? process_one_work+0x679/0x1a50 [<ffffffffafdd7b6d>] ? _raw_spin_unlock_irq+0x3d/0x60 [<ffffffffae3cff50>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffffae3d1a80>] worker_thread+0xe0/0x1460 [<ffffffffae3d19a0>] ? process_one_work+0x1a50/0x1a50 [<ffffffffae3e54c2>] kthread+0x222/0x2e0 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffafdd86aa>] ret_from_fork+0x2a/0x40 Object at ffff8803fc244088, in cache kmalloc-1024 size: 1024 Allocated: PID = 71 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 __kmalloc_track_caller+0x134/0x360 kmemdup+0x20/0x50 brcmf_cfg80211_attach+0x10b/0x3a90 [brcmfmac] brcmf_bus_start+0x19a/0x9a0 [brcmfmac] brcmf_pcie_setup+0x1f1a/0x3680 [brcmfmac] brcmf_fw_request_nvram_done+0x44c/0x11b0 [brcmfmac] request_firmware_work_func+0x135/0x280 process_one_work+0x716/0x1a50 worker_thread+0xe0/0x1460 kthread+0x222/0x2e0 ret_from_fork+0x2a/0x40 Freed: PID = 2568 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x71/0xb0 kfree+0xe8/0x2e0 brcmf_cfg80211_detach+0x62/0xf0 [brcmfmac] brcmf_detach+0x14a/0x2b0 [brcmfmac] brcmf_pcie_remove+0x140/0x5d0 [brcmfmac] brcmf_pcie_pm_leave_D3+0x198/0x2e0 [brcmfmac] pci_pm_resume+0x186/0x220 dpm_run_callback+0x6e/0x4f0 device_resume+0x1c2/0x670 async_resume+0x1d/0x50 async_run_entry_fn+0xfe/0x610 process_one_work+0x716/0x1a50 worker_thread+0xe0/0x1460 kthread+0x222/0x2e0 ret_from_fork+0x2a/0x40 Memory state around the buggy address: ffff8803fc243f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803fc244000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8803fc244080: fc fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8803fc244100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803fc244180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb What is happening is that brcmf_pcie_resume() detects a device that is no longer responsive and it decides to unbind resulting in a wiphy_unregister() and wiphy_free() call. Now the wiphy instance remains allocated, because PM needs to call wiphy_resume() for it. However, brcmfmac already does a kfree() for the struct cfg80211_registered_device::ops field. Change the checks in wiphy_resume() to only access the struct cfg80211_registered_device::ops if the wiphy instance is still registered at this time. Reported-by:
-
Victor Kamensky authored
commit 09a6adf5 upstream. After 52d7523d (arm64: mm: allow the kernel to handle alignment faults on user accesses) commit user-land accesses that produce unaligned exceptions like in case of aarch32 ldm/stm/ldrd/strd instructions operating on unaligned memory received by user-land as SIGSEGV. It is wrong, it should be reported as SIGBUS as it was before 52d7523d commit. Changed do_bad_area function to take signal and code parameters out of esr value using fault_info table, so in case of do_alignment_fault fault user-land will receive SIGBUS. Wrapped access to fault_info table into esr_to_fault_info function. Fixes: 52d7523d (arm64: mm: allow the kernel to handle alignment faults on user accesses) Signed-off-by:
Victor Kamensky <kamensky@cisco.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Quentin Schulz authored
commit 4bdc9029 upstream. The gyroscope chip might need to be reset to be used. Without the chip being reset, the driver stopped at the first regmap_read (to get the CHIP_ID) and failed to probe. The datasheet of the gyroscope says that a minimum wait of 30ms after the reset has to be done. This patch has been checked on a BMX055 and the datasheet of the BMG160 and the BMI055 give the same reset register and bits. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Shrirang Bagul authored
commit 51f528a1 upstream. This patch initializes the bootime in struct st_sensor_settings for lps22hb sensor. Without this, sensor channels read from sysfs always report stale values. Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Nikolaus Schulz authored
commit 7fd6592d upstream. Fix formatting of negative values of type IIO_VAL_FRACTIONAL_LOG2 by switching from do_div(), which can't handle negative numbers, to div_s64_rem(). Also use shift_right for shifting, which is safe with negative values. Signed-off-by:
Nikolaus Schulz <nikolaus.schulz@avionic-design.de> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Suzuki K Poulose authored
commit 8b3405e3 upstream. In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling unmap_stage2_range() on the entire memory range for the guest. This could cause problems with other callers (e.g, munmap on a memslot) trying to unmap a range. And since we have to unmap the entire Guest memory range holding a spinlock, make sure we yield the lock if necessary, after we unmap each PUD range. Fixes: commit d5d8184d ("KVM: ARM: Memory virtualization setup") Cc: Paolo Bonzini <pbonzin@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> [ Avoid vCPU starvation and lockup detector warnings ] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Marc Zyngier authored
commit 72f31048 upstream. We don't hold the mmap_sem while searching for VMAs (via find_vma), in kvm_arch_prepare_memory_region, which can end up in expected failures. Fixes: commit 8eef9123 ("arm/arm64: KVM: map MMIO regions at creation time") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Eric Auger <eric.auger@rehat.com> Reviewed-by:
-
Marc Zyngier authored
commit 90f6e150 upstream. We don't hold the mmap_sem while searching for the VMAs when we try to unmap each memslot for a VM. Fix this properly to avoid unexpected results. Fixes: commit 957db105 ("arm/arm64: KVM: Introduce stage2_unmap_vm") Reviewed-by:
-
Shuxiao Zhang authored
commit 97fbfef6 upstream. vfs_llseek will check whether the file mode has FMODE_LSEEK, no return failure. But ashmem can be lseek, so add FMODE_LSEEK to ashmem file. Comment From Greg Hackmann: ashmem_llseek() passes the llseek() call through to the backing shmem file. 91360b02 ("ashmem: use vfs_llseek()") changed this from directly calling the file's llseek() op into a VFS layer call. This also adds a check for the FMODE_LSEEK bit, so without that bit ashmem_llseek() now always fails with -ESPIPE. Fixes: 91360b02 ("ashmem: use vfs_llseek()") Signed-off-by:
Shuxiao Zhang <zhangshuxiao@xiaomi.com> Tested-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
NeilBrown authored
commit c8a139d0 upstream. ops->show() can return a negative error code. Commit 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") (in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors would look like large numbers. As a result, if an error is returned, sysfs_kf_read() will return the value of 'count', typically 4096. Commit 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") (in v4.8) extended this error to use the unsigned large 'len' as a size for memmove(). Consequently, if ->show returns an error, then the first read() on the sysfs file will return 4096 and could return uninitialized memory to user-space. If the application performs a subsequent read, this will trigger a memmove() with extremely large count, and is likely to crash the machine is bizarre ways. This bug can currently only be triggered by reading from an md sysfs attribute declared with __ATTR_PREALLOC() during the brief period between when mddev_put() deletes an mddev from the ->all_mddevs list, and when mddev_delayed_delete() - which is scheduled on a workqueue - completes. Before this, an error won't be returned by the ->show() After this, the ->show() won't be called. I can reproduce it reliably only by putting delay like usleep_range(500000,700000); early in mddev_delayed_delete(). Then after creating an md device md0 run echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state The bug can be triggered without the usleep. Fixes: 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") Fixes: 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
-
Tomasz Nowicki authored
commit feb199eb upstream. SZ_16M PEM resource size includes PEM-specific register and its children resources. Reservation of the whole SZ_16M range leads to child device driver failure when pcieport driver is requesting resources: pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed So we cannot reserve full 16M here and instead we want to reserve PEM-specific register only which is SZ_64K. At the end increase PEM resource to SZ_16M since this is what thunder_pem_init() call expects for proper initialization. Fixes: 9abb27c7 ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller") Signed-off-by:
Tomasz Nowicki <tn@semihalf.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tomasz Nowicki authored
commit 9abb27c7 upstream. During early days of PCI quirks support, ThunderX firmware did not provide PNP0c02 node with PCI configuration space and PEM-specific register ranges. This means that for legacy FW we are not reserving these resources and cannot gather PEM-specific resources for further PEM initialization. To support already deployed legacy FW, calculate PEM-specific ranges and provide resources reservation as fallback scenario into PEM driver when we could not gather PEM reg base from ACPI tables. Tested-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com> Signed-off-by:
-
Li Qiang authored
commit e7e11f99 upstream. In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Signed-off-by:
Li Qiang <liqiang6-s@360.cn> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 53e16798 upstream. The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit fe25deb7 upstream. Previously, when a surface was opened using a legacy (non prime) handle, it was verified to have been created by a client in the same master realm. Relax this so that opening is also allowed recursively if the client already has the surface open. This works around a regression in svga mesa where opening of a shared surface is used recursively to obtain surface information. Signed-off-by:
-
Murray McAllister authored
commit 63774069 upstream. In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Signed-off-by:
Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by:
-
Murray McAllister authored
commit 36274ab8 upstream. Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Signed-off-by:
-
Thomas Hellstrom authored
commit f7652afa upstream. A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Signed-off-by:
-
- 08 Apr, 2017 2 commits
-
-
Greg Kroah-Hartman authored
-
Zhi Wang authored
commit 3e52d71e upstream. This patch makes PPGTT page table non-shrinkable when using aliasing PPGTT mode. It's just a temporary solution for making GVT-g work. Fixes: 2ce5179f ("drm/i915/gtt: Free unused lower-level page tables") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486559013-25251-2-git-send-email-zhi.a.wang@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
