Make pointer to bus_type a pointer to const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240216144027.185959-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>

As the iommu_report_device_fault() has been converted to auto-respond a
page fault if it fails to enqueue it, there's no need to return a code
in any case. Make it return void.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-17-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The iopf_group_response() should return void, as nothing can do anything
with the failure. This implies that ops->page_response() must also return
void; this is consistent with what the drivers do. The failure paths,
which are all integrity validations of the fault, should be WARN_ON'd,
not return codes.

If the iommu core fails to enqueue the fault, it should respond the fault
directly by calling ops->page_response() instead of returning an error
number and relying on the iommu drivers to do so. Consolidate the error
fault handling code in the core.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-16-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Previously, before a group of page faults was passed to the domain's iopf
handler, the last page fault of the group was kept in the list of
iommu_fault_param::faults. In the page fault response path, the group's
last page fault was used to look up the list, and the page faults were
responded to device only if there was a matched fault.

The previous approach seems unnecessarily complex and not performance
friendly. Put the page fault group itself to the outstanding fault list.
It can be removed in the page fault response path or in the
iopf_queue_remove_device() path. The pending list is protected by
iommu_fault_param::lock. To allow checking for the group's presence in
the list using list_empty(), the iopf group should be removed from the
list with list_del_init().

IOMMU_PAGE_RESP_PASID_VALID is set in the code but not used anywhere.
Remove it to make the code clean. IOMMU_PAGE_RESP_PASID_VALID is set
in the response message indicating that the response message includes
a valid PASID value. Actually, we should keep this hardware detail in
the individual driver. When the page fault handling framework in IOMMU
and IOMMUFD subsystems includes a valid PASID in the fault message, the
response message should always contain the same PASID value. Individual
drivers should be responsible for deciding whether to include the PASID
in the messages they provide for the hardware.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-15-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Convert iopf_queue_remove_device() to return void instead of an error code,
as the return value is never used. This removal helper is designed to be
never-failed, so there's no need for error handling.

Ack all outstanding page requests from the device with the response code of
IOMMU_PAGE_RESP_INVALID, indicating device should not attempt any retry.

Add comments to this helper explaining the steps involved in removing a
device from the iopf queue and disabling its PRI. The individual drivers
are expected to be adjusted accordingly. Here we just define the expected
behaviors of the individual iommu driver from the core's perspective.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-14-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The per-device fault data structure stores information about faults
occurring on a device. Its lifetime spans from IOPF enablement to
disablement. Multiple paths, including IOPF reporting, handling, and
responding, may access it concurrently.

Previously, a mutex protected the fault data from use after free. But
this is not performance friendly due to the critical nature of IOPF
handling paths.

Refine this with a refcount-based approach. The fault data pointer is
obtained within an RCU read region with a refcount. The fault data
pointer is returned for usage only when the pointer is valid and a
refcount is successfully obtained. The fault data is freed with
kfree_rcu(), ensuring data is only freed after all RCU critical regions
complete.

An iopf handling work starts once an iopf group is created. The handling
work continues until iommu_page_response() is called to respond to the
iopf and the iopf group is freed. During this time, the device fault
parameter should always be available. Add a pointer to the device fault
parameter in the iopf_group structure and hold the reference until the
iopf_group is freed.

Make iommu_page_response() static as it is only used in io-pgfault.c.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-13-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The per-device fault data is a data structure that is used to store
information about faults that occur on a device. This data is allocated
when IOPF is enabled on the device and freed when IOPF is disabled. The
data is used in the paths of iopf reporting, handling, responding, and
draining.

The fault data is protected by two locks:

- dev->iommu->lock: This lock is used to protect the allocation and
  freeing of the fault data.
- dev->iommu->fault_parameter->lock: This lock is used to protect the
  fault data itself.

Apply the locking mechanism to the fault reporting and responding paths.

The fault_parameter->lock is also added in iopf_queue_discard_partial().
It does not fix any real issue, as iopf_queue_discard_partial() is only
used in the VT-d driver's prq_event_thread(), which is a single-threaded
path that reports the IOPFs.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-12-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Add CONFIG_IOMMU_IOPF for page fault handling framework and select it
from its real consumer. Move iopf function declaration from iommu-sva.h
to iommu.h and remove iommu-sva.h as it's empty now.

Consolidate all SVA related code into iommu-sva.c:
- Move iommu_sva_domain_alloc() from iommu.c to iommu-sva.c.
- Move sva iopf handling code from io-pgfault.c to iommu-sva.c.

Consolidate iommu_report_device_fault() and iommu_page_response() into
io-pgfault.c.

Export iopf_free_group() and iopf_group_response() for iopf handlers
implemented in modules. Some functions are renamed with more meaningful
names. No other intentional functionality changes.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-11-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Make iommu_queue_iopf() more generic by making the iopf_group a minimal
set of iopf's that an iopf handler of domain should handle and respond
to. Add domain parameter to struct iopf_group so that the handler can
retrieve and use it directly.

Change iommu_queue_iopf() to forward groups of iopf's to the domain's
iopf handler. This is also a necessary step to decouple the sva iopf
handling code from this interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-10-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Move iopf_group data structure to iommu.h to make it a minimal set of
faults that a domain's page fault handler should handle.

Add a new function, iopf_free_group(), to free a fault group after all
faults in the group are handled. This function will be made global so
that it can be called from other files, such as iommu-sva.c.

Move iopf_queue data structure to iommu.h to allow the workqueue to be
scheduled out of this file.

This will simplify the sequential patches.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-9-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The iommu_fault_event and iopf_fault data structures store the same
information about an iopf fault. They are also used in the same way.
Merge these two data structures into a single one to make the code
more concise and easier to maintain.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-8-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The individual iommu driver reports the iommu page faults by calling
iommu_report_device_fault(), where a pre-registered device fault handler
is called to route the fault to another fault handler installed on the
corresponding iommu domain.

The pre-registered device fault handler is static and won't be dynamic
as the fault handler is eventually per iommu domain. Replace calling
device fault handler with iommu_queue_iopf().

After this replacement, the registering and unregistering fault handler
interfaces are not needed anywhere. Remove the interfaces and the related
data structures to avoid dead code.

Convert cookie parameter of iommu_queue_iopf() into a device pointer that
is really passed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-7-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The struct dev_iommu contains two pointers, fault_param and iopf_param.
The fault_param pointer points to a data structure that is used to store
pending faults that are awaiting responses. The iopf_param pointer points
to a data structure that is used to store partial faults that are part of
a Page Request Group.

The fault_param and iopf_param pointers are essentially duplicate. This
causes memory waste. Merge the iopf_device_param pointer into the
iommu_fault_param pointer to consolidate the code and save memory. The
consolidated pointer would be allocated on demand when the device driver
enables the iopf on device, and would be freed after iopf is disabled.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-6-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

struct iommu_fault_page_request and struct iommu_page_response are not
part of uAPI anymore. Convert them to data structures for kAPI.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-5-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The unrecoverable fault data is not used anywhere. Remove it to avoid
dead code.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-4-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

No device driver registers fault handler to handle the reported
unrecoveraable faults. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-3-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The iommu fault data is currently defined in uapi/linux/iommu.h, but is
only used inside the iommu subsystem. Move it to linux/iommu.h, where it
will be more accessible to kernel drivers.

With this done, uapi/linux/iommu.h becomes empty and can be removed from
the tree.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-2-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The magazine buffers can take gigabytes of kmem memory, dominating all
other allocations. For observability purpose create named slab cache so
the iova magazine memory overhead can be clearly observed.

With this change:

> slabtop -o | head
 Active / Total Objects (% used)    : 869731 / 952904 (91.3%)
 Active / Total Slabs (% used)      : 103411 / 103974 (99.5%)
 Active / Total Caches (% used)     : 135 / 211 (64.0%)
 Active / Total Size (% used)       : 395389.68K / 411430.20K (96.1%)
 Minimum / Average / Maximum Object : 0.02K / 0.43K / 8.00K

OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME
244412 244239 99%    1.00K  61103       4    244412K iommu_iova_magazine
 91636  88343 96%    0.03K    739     124      2956K kmalloc-32
 75744  74844 98%    0.12K   2367      32      9468K kernfs_node_cache

On this machine it is now clear that magazine use 242M of kmem memory.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
[ rm: adjust to rework of iova_cache_{get,put} ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/dc5c51aaba50906a92b9ba1a5137ed462484a7be.1707144953.git.robin.murphy@arm.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The iova_cache_{get,put}() calls really represent top-level lifecycle
management for the whole IOVA library, so it's long been rather
confusing to have them buried right in the middle of the allocator
implementation details. Move them to a more expected position at the end
of the file, where it will then also be easier to expand them. With
this, we can also move the rcache hotplug handler (plus another stray
function) into the rcache portion of the file.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/d4753562f4faa0e6b3aeebcbf88fdb60cc22d715.1707144953.git.robin.murphy@arm.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Failure handling in iova_cache_get() is a little messy, and we'd like
to add some more to it, so let's tidy up a bit first. By leaving the
hotplug handler until last we can take advantage of kmem_cache_destroy()
being NULL-safe to have a single cleanup label. We can also improve the
error reporting, noting that kmem_cache_create() already screams if it
fails, so that one is redundant.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/ae4a3bda2d6a9b738221553c838d30473bd624e7.1707144953.git.robin.murphy@arm.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
  and extent handling code"

* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
  ext4: make ext4_map_blocks() distinguish delalloc only extent
  ext4: add a hole extent entry in cache after punch
  ext4: correct the hole length returned by ext4_map_blocks()
  ext4: convert to exclusive lock while inserting delalloc extents
  ext4: refactor ext4_da_map_blocks()
  ext4: remove 'needed' in trace_ext4_discard_preallocations
  ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
  ext4: remove unused return value of ext4_mb_release_group_pa
  ext4: remove unused return value of ext4_mb_release_inode_pa
  ext4: remove unused return value of ext4_mb_release
  ext4: remove unused ext4_allocation_context::ac_groups_considered
  ext4: remove unneeded return value of ext4_mb_release_context
  ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
  ext4: remove unused return value of __mb_check_buddy
  ext4: mark the group block bitmap as corrupted before reporting an error
  ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
  ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
  ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
  ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
  ...

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, mostly multichannel related:

   - four multichannel fixes including fix for channel allocation when
     multiple inactive channels, fix for unneeded race in channel
     deallocation, correct redundant channel scaling, and redundant
     multichannel disabling scenarios

   - add warning if max compound requests reached"

* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: increase number of PDUs allowed in a compound request
  cifs: failure to add channel on iface should bump up weight
  cifs: do not search for channel if server is terminating
  cifs: avoid redundant calls to disable multichannel
  cifs: make sure that channel scaling is done only once

Pull xfs fixes from Chandan Babu:

 - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
   attribute fork

 - Remove conditional compilation of realtime geometry validator
   functions to prevent confusing error messages from being printed on
   the console during the mount operation

* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove conditional building of rt geometry validator functions
  xfs: reset XFS_ATTR_INCOMPLETE filter on node removal

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny driver fixes for 6.8-rc3.  They include:

   - Android binder long-term bug with epoll finally being fixed

   - fastrpc driver shutdown bugfix

   - open-dice lockdep fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: signal epoll threads of self-work
  misc: open-dice: Fix spurious lockdep warning
  misc: fastrpc: Mark all sessions as invalid in cb_remove

Pull tty and serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.8-rc3 that
  resolve a number of reported issues. Included in here are:

   - rs485 flag definition fix that affected the user/kernel abi in -rc1

   - max310x driver fixes

   - 8250_pci1xxxx driver off-by-one fix

   - uart_tiocmget locking race fix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: max310x: prevent infinite while() loop in port startup
  serial: max310x: fail probe if clock crystal is unstable
  serial: max310x: improve crystal stable clock detection
  serial: max310x: set default value when reading clock ready bit
  serial: core: Fix atomicity violation in uart_tiocmget
  serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
  tty: serial: Fix bit order in RS485 flag definitions

Pull USB driver fixes from Greg KH:
 "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
  here are:

   - new usb-serial driver ids

   - new dwc3 driver id added

   - typec driver change revert

   - ncm gadget driver endian bugfix

   - xhci bugfixes for a number of reported issues

   - usb hub bugfix for alternate settings

   - ulpi driver debugfs memory leak fix

   - chipidea driver bugfix

   - usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  USB: serial: option: add Fibocom FM101-GL variant
  USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
  USB: serial: cp210x: add ID for IMST iM871A-USB
  usb: typec: tcpm: fix the PD disabled case
  usb: ucsi_acpi: Quirk to ack a connector change ack cmd
  usb: ucsi_acpi: Fix command completion handling
  usb: ucsi: Add missing ppm_lock
  usb: ulpi: Fix debugfs directory leak
  Revert "usb: typec: tcpm: fix cc role at port reset"
  usb: gadget: pch_udc: fix an Excess kernel-doc warning
  usb: f_mass_storage: forbid async queue when shutdown happen
  USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
  usb: chipidea: core: handle power lost in workqueue
  usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
  usb: dwc3: pci: add support for the Intel Arrow Lake-H
  usb: core: Prevent null pointer dereference in update_port_device_state
  xhci: handle isoc Babble and Buffer Overrun events properly
  xhci: process isoc TD properly when there was a transaction error mid TD.
  xhci: fix off by one check when adding a secondary interrupter.
  xhci: fix possible null pointer dereference at secondary interrupter removal
  ...

Pull i2c fixlet from Wolfram Sang:
 "MAINTAINERS update to point people to the new tree for i2c host driver
  changes"

* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Update i2c host drivers repository

Pull dmaengine fixes from Vinod Koul:
 "Core:

   - fix return value of is_slave_direction() for D2D dma

  Driver fixes for:

   - Documentaion fixes to resolve warnings for at_hdmac driver

   - bunch of fsl driver fixes for memory leaks, and useless kfree

   - TI edma and k3 fixes for packet error and null pointer checks"

* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: add missing kernel-doc style description
  dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  dmaengine: fsl-qdma: Remove a useless devm_kfree()
  dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
  dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
  dmaengine: ti: k3-udma: Report short packet errors
  dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  dmaengine: at_hdmac: fix some kernel-doc warnings

Pull phy driver fixes from Vinod Koul:

 - TI null pointer dereference

 - missing erdes mux entry in lan966x driver

 - Return of error code in renesas driver

 - Serdes init sequence and register offsets for IPQ drivers

* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
  phy: lan966x: Add missing serdes mux entry
  phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
  phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Merge tag 'i2c-host-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.

Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Vendor events:

   - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
     ("cpu_atom", "cpu_core") needs to be used as a prefix to be
     considered on a metric formula, detected via one of the 'perf test'
     entries.

  'perf test' fixes:

   - Fix the creation of event selector lists on 'perf test' entries, by
     initializing the sample ID flag, which is done by 'perf record', so
     this fix affects only the tests, the common case isn't affected

   - Make 'perf list' respect debug settings (-v) to fix its 'perf test'
     entry

   - Fix 'perf script' test when python support isn't enabled

   - Special case 'perf script' tests on s390, where only DWARF call
     graphs are supported and only on software events

   - Make 'perf daemon' signal test less racy

  Compiler warnings/errors:

   - Remove needless malloc(0) call in 'perf top' that triggers
     -Walloc-size

   - Fix calloc() argument order to address error introduced in gcc-14

  Build:

   - Make minimal shellcheck version to v0.6.0, avoiding the build to
     fail with older versions

  Sync kernel header copies:

   - stat.h to pick STATX_MNT_ID_UNIQUE

   - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING

   - drm.h to pick DRM_IOCTL_MODE_CLOSEFB

   - unistd.h to pick {list,stat}mount,
     lsm_{[gs]et_self_attr,list_modules} syscall numbers

   - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes

   - x86's mem{cpy,set}_64.S used in 'perf bench'

   - Also, without tooling effects: asm-generic/unaligned.h, mount.h,
     fcntl.h, kvm headers"

* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  perf evlist: Fix evlist__new_default() for > 1 core PMU
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
  tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
  perf vendor events intel: Alderlake/sapphirerapids metric fixes
  tools headers UAPI: Sync kvm headers with the kernel sources
  perf tools: Fix calloc() arguments to address error introduced in gcc-14
  perf top: Remove needless malloc(0) call that triggers -Walloc-size
  perf build: Make minimal shellcheck version to v0.6.0
  tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
  perf test shell daemon: Make signal test less racy
  perf test shell script: Fix test for python being disabled
  perf test: Workaround debug output in list test
  perf list: Add output file option
  perf list: Switch error message to pr_err() to respect debug settings (-v)
  perf test: Fix 'perf script' tests on s390
  tools headers UAPI: Sync linux/fcntl.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
  ...

Pull tracing and eventfs fixes from Steven Rostedt:

 - Fix the return code for ring_buffer_poll_wait()

   It was returing a -EINVAL instead of EPOLLERR.

 - Zero out the tracefs_inode so that all fields are initialized.

   The ti->private could have had stale data, but instead of just
   initializing it to NULL, clear out the entire structure when it is
   allocated.

 - Fix a crash in timerlat

   The hrtimer was initialized at read and not open, but is canceled at
   close. If the file was opened and never read the close will pass a
   NULL pointer to hrtime_cancel().

 - Rewrite of eventfs.

   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.

 - Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.

 - Restructure the eventfs_inode to make it more compact, and remove the
   unused llist field.

 - Remove the fsnotify*() funtions for when the inodes were being
   created in the lookup code. It doesn't make sense to notify about
   creation just because something is being looked up.

 - The inode hard link count was not accurate.

   It was being updated when a file was looked up. The inodes of
   directories were updating their parent inode hard link count every
   time the inode was created. That means if memory reclaim cleaned a
   stale directory inode and the inode was lookup up again, it would
   increment the parent inode again as well. Al Viro said to just have
   all eventfs directories have a hard link count of 1. That tells user
   space not to trust it.

* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Keep all directory links at 1
  eventfs: Remove fsnotify*() functions from lookup()
  eventfs: Restructure eventfs_inode structure to be more condensed
  eventfs: Warn if an eventfs_inode is freed without is_freed being set
  tracing/timerlat: Move hrtimer_init to timerlat_fd open()
  eventfs: Get rid of dentry pointers without refcounts
  eventfs: Clean up dentry ops and add revalidate function
  eventfs: Remove unused d_parent pointer field
  tracefs: dentry lookup crapectomy
  tracefs: Avoid using the ei->dentry pointer unnecessarily
  eventfs: Initialize the tracefs inode properly
  tracefs: Zero out the tracefs_inode when allocating it
  ring-buffer: Clean ring_buffer_poll_wait() error return

Pull gfs2 revert from Andreas Gruenbacher:
 "It turns out that the commit to use GL_NOBLOCK flag for non-blocking
  lookups has several issues, and not all of them have a simple fix"

* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"

Pull pci fixes from Bjorn Helgaas:

 - Fix a potential deadlock that was reintroduced by an ASPM revert
   merged for v6.8 (Johan Hovold)

 - Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
   Pieralisi)

* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
  PCI/ASPM: Fix deadlock when enabling ASPM

Pul drm fixes from Dave Airlie:
 "Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
  better fix for the deadlock and also helps with a sync race we were
  seeing.

  dma-buf:
   - heaps CMA page accounting fix

  virtio-gpu:
   - fix segment size

  xe:
   - A crash fix
   - A fix for an assert due to missing mem_acces ref
   - Only allow a single user-fence per exec / bind.
   - Some sparse warning fixes
   - Two fixes for compilation failures on various odd combinations of
     gcc / arch pointed out on LKML.
   - Fix a fragile partial allocation pointed out on LKML.
   - A sysfs ABI documentation warning fix

  amdgpu:
   - Fix reboot issue seen on some 7000 series dGPUs
   - Fix client init order for KFD
   - Misc display fixes
   - USB-C fix
   - DCN 3.5 fixes
   - Fix issues with GPU scheduler and GPU reset
   - GPU firmware loading fix
   - Misc fixes
   - GC 11.5 fix
   - VCN 4.0.5 fix
   - IH overflow fix

  amdkfd:
   - SVM fixes
   - Trap handler fix
   - Fix device permission lookup
   - Properly reserve BO before validating it

  nouveau:
   - fence/irq lock deadlock fix (second attempt)
   - gsp command size fix

* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
  nouveau: offload fence uevents work to workqueue
  nouveau/gsp: use correct size for registry rpc.
  drm/amdgpu/pm: Use inline function for IP version check
  drm/hwmon: Fix abi doc warnings
  drm/xe: Make all GuC ABI shift values unsigned
  drm/xe/vm: Subclass userptr vmas
  drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
  drm/xe: Don't use __user error pointers
  drm/xe: Annotate mcr_[un]lock()
  drm/xe: Only allow 1 ufence per exec / bind IOCTL
  drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
  drm/xe: Fix crash in trace_dma_fence_init()
  drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
  drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
  drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
  drm/amdkfd: reserve the BO before validating it
  drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
  drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
  drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
  drm/amd: Don't init MEC2 firmware when it fails to load
  ...

Pull input fixes from Dmitry Torokhov:

 - a fix for the fix to deal with newer laptops which get confused by
   the "GET ID" command when probing for PS/2 keyboards

 - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops

 - a change to bcm5974 to validate that the device has appropriate
   endpoints

 - an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers

 - a quirk to Goodix controller to deal with extra GPIO described in
   ACPI tables on some devices.

* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
  Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
  Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
  Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
  Input: bcm5974 - check endpoint type before starting traffic
  Input: xpad - add Lenovo Legion Go controllers
  Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

Pull sound fixes from Takashi Iwai:
 "A collection of fixes, mostly device-specific ones:

   - Minor PCM core fix for name strings

   - ASoC Qualcomm fixes, including DAI support extensions

   - ASoC AMD platform updates

   - ASoC Allwinner platform updates

   - Various ASoC codec fixes for WSA, WCD, ES8326 drivers

   - Various HD-audio and USB-audio fixes and quirks

   - A series of fixes for Cirrus CS35L56 codecs"

* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
  ALSA: usb-audio: Ignore clock selector errors for single connection
  ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
  ALSA: hda: cs35l56: Remove unused test stub function
  ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
  ALSA: hda: cs35l56: Fix filename string field layout
  ALSA: hda: cs35l56: Fix order of searching for firmware files
  ASoC: cs35l56: Allow more time for firmware to boot
  ASoC: cs35l56: Load tunings for the correct speaker models
  ASoC: cs35l56: Firmware file must match the version of preloaded firmware
  ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
  ASoC: cs35l56: Fix for initializing ASP1 mixer registers
  ALSA: hda: cs35l56: Initialize all ASP1 registers
  ASoC: cs35l56: Fix default SDW TX mixer registers
  ASoC: cs35l56: Fix to ensure ASP1 registers match cache
  ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
  ASoC: cs35l56: Don't add the same register patch multiple times
  ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
  ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
  ASoC: wm_adsp: Don't overwrite fwf_name with the default
  ASoC: wm_adsp: Fix firmware file search order
  ...

Merge tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - pmbus/mp2975: Fix driver initialization

 - gigabyte_waterforce: Add missing unlock in error handling path

* tag 'hwmon-for-v6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'
  hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device
  hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()

Pull power supply fix from Sebastian Reichel:

 - qcom_battmgr: revert broken fix

* tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"