- 25 Oct, 2022 4 commits
-
-
Paolo Abeni authored
The mptcp_pm_nl_get_local_id() code assumes that the msk local address is available at that point. For passive sockets, we initialize such address at accept() time. Depending on the running configuration and the user-space timing, a passive MPJ subflow can join the msk socket before accept() completes. In such case, the PM assigns a wrong local id to the MPJ subflow and later PM netlink operations will end-up touching the wrong/unexpected subflow. All the above causes sporadic self-tests failures, especially when the host is heavy loaded. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/308 Fixes: 01cacb00 ("mptcp: add netlink-based PM") Fixes: d045b9eb ("mptcp: introduce implicit endpoints") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Horatiu Vultur authored
When a frame is sent using FDMA, the skb is mapped and then the mapped address is given to an tx dcb that is different than the last used tx dcb. Once the HW finish with this frame, it would generate an interrupt and then the dcb can be reused and memory can be freed. For each dcb there is an dcb buf that contains some meta-data(is used by PTP, is it free). There is 1 to 1 relationship between dcb and dcb_buf. The following issue was observed. That sometimes after changing the MTU to allocate new tx dcbs and dcbs_buf, two frames were not transmitted. The frames were not transmitted because when reloading the tx dcbs, it was always presuming to use the first dcb but that was not always happening. Because it could be that the last tx dcb used before changing MTU was first dcb and then when it tried to get the next dcb it would take dcb 1 instead of 0. Because it is supposed to take a different dcb than the last used one. This can be fixed simply by changing tx->last_in_use to -1 when the fdma is disabled to reload the new dcb and dcbs_buff. But there could be a different issue. For example, right after the frame is sent, the MTU is changed. Now all the dcbs and dcbs_buf will be cleared. And now get the interrupt from HW that it finished with the frame. So when we try to clear the skb, it is not possible because we lost all the dcbs_buf. The solution here is to stop replacing the tx dcbs and dcbs_buf when changing MTU because the TX doesn't care what is the MTU size, it is only the RX that needs this information. Fixes: 2ea1cbac ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221021090711.3749009-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
To keep backward compatibility we used to leave attribute parsing to the family if no policy is specified. This becomes tedious as we move to more strict validation. Families must define reject all policies if they don't want any attributes accepted. Piggy back on the resv_start_op field as the switchover point. AFAICT only ethtool has added new commands since the resv_start_op was defined, and it has per-op policies so this should be a no-op. Nonetheless the patch should still go into v6.1 for consistency. Link: https://lore.kernel.org/all/20221019125745.3f2e7659@kernel.org/ Link: https://lore.kernel.org/r/20221021193532.1511293-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
The similar fix as commit 46cdedf2 ("ethtool: pse-pd: fix null-deref on genl_info in dump") is also needed for ethtool eeprom. Fixes: c781ff12 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 24 Oct, 2022 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe I'm biased. Current release - regressions: - eth: fman: re-expose location of the MAC address to userspace, apparently some udev scripts depended on the exact value Current release - new code bugs: - bpf: - wait for busy refill_work when destroying bpf memory allocator - allow bpf_user_ringbuf_drain() callbacks to return 1 - fix dispatcher patchable function entry to 5 bytes nop Previous releases - regressions: - net-memcg: avoid stalls when under memory pressure - tcp: fix indefinite deferral of RTO with SACK reneging - tipc: fix a null-ptr-deref in tipc_topsrv_accept - eth: macb: specify PHY PM management done by MAC - tcp: fix a signed-integer-overflow bug in tcp_add_backlog() Previous releases - always broken: - eth: amd-xgbe: SFP fixes and compatibility improvements Misc: - docs: netdev: offer performance feedback to contributors" * tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) net-memcg: avoid stalls when under memory pressure tcp: fix indefinite deferral of RTO with SACK reneging tcp: fix a signed-integer-overflow bug in tcp_add_backlog() net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed docs: netdev: offer performance feedback to contributors kcm: annotate data-races around kcm->rx_wait kcm: annotate data-races around kcm->rx_psock net: fman: Use physical address for userspace interfaces net/mlx5e: Cleanup MACsec uninitialization routine atlantic: fix deadlock at aq_nic_stop nfp: only clean `sp_indiff` when application firmware is unloaded amd-xgbe: add the bit rate quirk for Molex cables amd-xgbe: fix the SFP compliance codes check for DAC cables amd-xgbe: enable PLL_CTL for fixed PHY modes only amd-xgbe: use enums for mailbox cmd and sub_cmds amd-xgbe: Yellow carp devices do not need rrc bpf: Use __llist_del_all() whenever possbile during memory draining bpf: Wait for busy refill_work when destroying bpf memory allocator MAINTAINERS: add keyword match on PTP ...
-
Linus Torvalds authored
Merge tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "Fix a regression caused by commit bf95b2bc ("rcu: Switch polled grace-period APIs to ->gp_seq_polled"), which could incorrectly leave interrupts enabled after an early-boot call to synchronize_rcu(). Such synchronize_rcu() calls must acquire leaf rcu_node locks in order to properly interact with polled grace periods, but the code did not take into account the possibility of synchronize_rcu() being invoked from the portion of the boot sequence during which interrupts are disabled. This commit therefore switches the lock acquisition and release from irq to irqsave/irqrestore" * tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Keep synchronize_rcu() from enabling irqs in early boot
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "One single fix to update alloc_string_stream() callers to check for IS_ERR() instead of NULL to be in sync with alloc_string_stream() returning an ERR_PTR()" * tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: update NULL vs IS_ERR() tests
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - futex, intel_pstate, kexec build fixes - ftrace dynamic_events dependency check fix - memory-hotplug fix to remove redundant warning from test report * tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: fix dynamic_events dependency check selftests/memory-hotplug: Remove the redundant warning information selftests/kexec: fix build for ARCH=x86_64 selftests/intel_pstate: fix build for ARCH=x86_64 selftests/futex: fix build for clang
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix typos in UART1 and MMC in the Ingenic driver - A really well researched glitch bug fix to the Qualcomm driver that was tracked down and fixed by Dough Anderson from Chromium. Hats off for this one! - Revert two patches on the Xilinx ZynqMP driver: this needs a proper solution making use of firmware version information to adapt to different firmware releases - Fix interrupt triggers in the Ocelot driver * tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix incorrect trigger of the interrupt. Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration" Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance" pinctrl: qcom: Avoid glitching lines when we first mux to output pinctrl: Ingenic: JZ4755 bug fixes
-
Jakub Kicinski authored
As Shakeel explains the commit under Fixes had the unintended side-effect of no longer pre-loading the cached memory allowance. Even tho we previously dropped the first packet received when over memory limit - the consecutive ones would get thru by using the cache. The charging was happening in batches of 128kB, so we'd let in 128kB (truesize) worth of packets per one drop. After the change we no longer force charge, there will be no cache filling side effects. This causes significant drops and connection stalls for workloads which use a lot of page cache, since we can't reclaim page cache under GFP_NOWAIT. Some of the latency can be recovered by improving SACK reneg handling but nowhere near enough to get back to the pre-5.15 performance (the application I'm experimenting with still sees 5-10x worst latency). Apply the suggested workaround of using GFP_ATOMIC. We will now be more permissive than previously as we'll drop _no_ packets in softirq when under pressure. But I can't think of any good and simple way to address that within networking. Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/Suggested-by: Shakeel Butt <shakeelb@google.com> Fixes: 4b1327be ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()") Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Neal Cardwell authored
This commit fixes a bug that can cause a TCP data sender to repeatedly defer RTOs when encountering SACK reneging. The bug is that when we're in fast recovery in a scenario with SACK reneging, every time we get an ACK we call tcp_check_sack_reneging() and it can note the apparent SACK reneging and rearm the RTO timer for srtt/2 into the future. In some SACK reneging scenarios that can happen repeatedly until the receive window fills up, at which point the sender can't send any more, the ACKs stop arriving, and the RTO fires at srtt/2 after the last ACK. But that can take far too long (O(10 secs)), since the connection is stuck in fast recovery with a low cwnd that cannot grow beyond ssthresh, even if more bandwidth is available. This fix changes the logic in tcp_check_sack_reneging() to only rearm the RTO timer if data is cumulatively ACKed, indicating forward progress. This avoids this kind of nearly infinite loop of RTO timer re-arming. In addition, this meets the goals of tcp_check_sack_reneging() in handling Windows TCP behavior that looks temporarily like SACK reneging but is not really. Many thanks to Jakub Kicinski and Neil Spring, who reported this issue and provided critical packet traces that enabled root-causing this issue. Also, many thanks to Jakub Kicinski for testing this fix. Fixes: 5ae344c9 ("tcp: reduce spurious retransmits due to transient SACK reneging") Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: Neil Spring <ntspring@fb.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Tested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2022-10-23 We've added 7 non-merge commits during the last 18 day(s) which contain a total of 8 files changed, 69 insertions(+), 5 deletions(-). The main changes are: 1) Wait for busy refill_work when destroying bpf memory allocator, from Hou. 2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David. 3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri. 4) Prevent decl_tag from being referenced in func_proto, from Stanislav. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use __llist_del_all() whenever possbile during memory draining bpf: Wait for busy refill_work when destroying bpf memory allocator bpf: Fix dispatcher patchable function entry to 5 bytes nop bpf: prevent decl_tag from being referenced in func_proto selftests/bpf: Add reproducer for decl_tag in func_proto return type selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1 bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1 ==================== Link: https://lore.kernel.org/r/20221023192244.81137-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Lu Wei authored
The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and in tcp_add_backlog(), the variable limit is caculated by adding sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value of int and overflow. This patch reduces the limit budget by halving the sndbuf to solve this issue since ACK packets are much smaller than the payload. Fixes: c9c33212 ("tcp: add tcp_add_backlog()") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhang Changzhong authored
The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fixes: 504d4721 ("MIPS: Lantiq: Add ethernet driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhengchao Shao authored
When the ops_init() interface is invoked to initialize the net, but ops->init() fails, data is released. However, the ptr pointer in net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked to release the net, invalid address access occurs. The process is as follows: setup_net() ops_init() data = kzalloc(...) ---> alloc "data" net_assign_generic() ---> assign "date" to ptr in net->gen ... ops->init() ---> failed ... kfree(data); ---> ptr in net->gen is invalid ... ops_exit_list() ... nfqnl_nf_hook_drop() *q = nfnl_queue_pernet(net) ---> q is invalid The following is the Call Trace information: BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280 Read of size 8 at addr ffff88810396b240 by task ip/15855 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 nfqnl_nf_hook_drop+0x264/0x280 nf_queue_nf_hook_drop+0x8b/0x1b0 __nf_unregister_net_hook+0x1ae/0x5a0 nf_unregister_net_hooks+0xde/0x130 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Allocated by task 15855: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc+0x49/0xb0 ops_init+0xe7/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 15855: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 ops_init+0xb9/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: f875bae0 ("net: Automatically allocate per namespace data.") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Some of us gotten used to producing large quantities of peer feedback at work, every 3 or 6 months. Extending the same courtesy to community members seems like a logical step. It may be hard for some folks to get validation of how important their work is internally, especially at smaller companies which don't employ many kernel experts. The concept of "peer feedback" may be a hyperscaler / silicon valley thing so YMMV. Hopefully we can build more context as we go. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== kcm: annotate data-races This series address two different syzbot reports for KCM. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. syzbot reported: BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1: reserve_rx_kcm net/kcm/kcmsock.c:283 [inline] kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0: kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. We do the same for kcm->rx_wait in the following patch. syzbot reported: BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1: unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313 kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0: kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffff88812971ce00 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Anderson authored
Before 262f2b78 ("net: fman: Map the base address once"), the physical address of the MAC was exposed to userspace in two places: via sysfs and via SIOCGIFMAP. While this is not best practice, it is an external ABI which is in use by userspace software. The aforementioned commit inadvertently modified these addresses and made them virtual. This constitutes and ABI break. Additionally, it leaks the kernel's memory layout to userspace. Partially revert that commit, reintroducing the resource back into struct mac_device, while keeping the intended changes (the rework of the address mapping). Fixes: 262f2b78 ("net: fman: Map the base address once") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
The mlx5e_macsec_cleanup() routine has NULL pointer dereferencing if mlx5 device doesn't support MACsec (priv->macsec will be NULL). While at it delete comment line, assignment and extra blank lines, so fix everything in one patch. Fixes: 1f53da67 ("net/mlx5e: Create advanced steering operation (ASO) object for MACsec") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Íñigo Huguet authored
NIC is stopped with rtnl_lock held, and during the stop it cancels the 'service_task' work and free irqs. However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock happens if aq_nic_stop tries to cancel/disable them when they've already started their execution. As the deadlock is caused by rtnl_lock, it causes many other processes to stall, not only atlantic related stuff. Fix it by introducing a mutex that protects each NIC's macsec related data, and locking it instead of the rtnl_lock from the service task and the threaded IRQ. Before this patch, all macsec data was protected with rtnl_lock, but maybe not all of it needs to be protected. With this new mutex, further efforts can be made to limit the protected data only to that which requires it. However, probably it doesn't worth it because all macsec's data accesses are infrequent, and almost all are done from macsec_ops or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't never be much contended. The issue appeared repeteadly attaching and deattaching the NIC to a bond interface. Doing that after this patch I cannot reproduce the bug. Fixes: 62c1c2e6 ("net: atlantic: MACSec offload skeleton") Reported-by: Li Liang <liali@redhat.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Oct, 2022 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix compilation without RISCV_ISA_ZICBOM - Fix kvm_riscv_vcpu_timer_pending() for Sstc ARM: - Fix a bug preventing restoring an ITS containing mappings for very large and very sparse device topology - Work around a relocation handling error when compiling the nVHE object with profile optimisation - Fix for stage-2 invalidation holding the VM MMU lock for too long by limiting the walk to the largest block mapping size - Enable stack protection and branch profiling for VHE - Two selftest fixes x86: - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl selftests: - synchronize includes between include/uapi and tools/include/uapi" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools: include: sync include/api/linux/kvm.h KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter() kvm: Add support for arch compat vm ioctls RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc RISC-V: Fix compilation without RISCV_ISA_ZICBOM KVM: arm64: vgic: Fix exit condition in scan_its_table() KVM: arm64: nvhe: Fix build with profile optimization KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test KVM: arm64: selftests: Fix multiple versions of GIC creation KVM: arm64: Enable stack protection and branch profiling for VHE KVM: arm64: Limit stage2_apply_range() batch size to largest block KVM: arm64: Work out supported block level at compile time
-
Jason A. Donenfeld authored
This reverts commit 72a95859. It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances, which use the syscon driver. Little-endian is not effected, which means likely it's important to handle regmap_get_val_endian() in this function after all. Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lee Jones <lee@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Fix raw data handling when perf events are used in bpf - Rework how SIGTRAPs get delivered to events to address a bunch of problems with it. Add a selftest for that too * tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bpf: Fix sample_flags for bpf_perf_event_output selftests/perf_events: Add a SIGTRAP stress test with disables perf: Fix missing SIGTRAPs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Adjust code to not trip up CFI - Fix sched group cookie matching * tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Introduce struct balance_callback to avoid CFI mismatches sched/core: Fix comparison in sched_group_cookie_match()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: - Fix ORC stack unwinding when GCOV is enabled * tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unreliable stack dump with gcov
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "As usually the case, right after a major release, the tip urgent branches accumulate a couple more fixes than normal. And here is the x86, a bit bigger, urgent pile. - Use the correct CPU capability clearing function on the error path in Intel perf LBR - A CFI fix to ftrace along with a simplification - Adjust handling of zero capacity bit mask for resctrl cache allocation on AMD - A fix to the AMD microcode loader to attempt patch application on every logical thread - A couple of topology fixes to handle CPUID leaf 0x1f enumeration info properly - Drop a -mabi=ms compiler option check as both compilers support it now anyway - A couple of fixes to how the initial, statically allocated FPU buffer state is setup and its interaction with dynamic states at runtime" * tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap() ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph() x86/ftrace: Remove ftrace_epilogue() x86/resctrl: Fix min_cbm_bits for AMD x86/microcode/AMD: Apply the patch early on every logical thread x86/topology: Fix duplicated core ID within a package x86/topology: Fix multiple packages shown on a single-package system hwmon/coretemp: Handle large core ID value x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB x86/fpu: Exclude dynamic states from init_fpstate x86/fpu: Fix the init_fpstate size check with the actual size x86/fpu: Configure init_fpstate attributes orderly
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring follow-up from Jens Axboe: "Currently the zero-copy has automatic fallback to normal transmit, and it was decided that it'd be cleaner to return an error instead if the socket type doesn't support it. Zero-copy does work with UDP and TCP, it's more of a future proofing kind of thing (eg for samba)" * tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux: io_uring/net: fail zc sendmsg when unsupported by socket io_uring/net: fail zc send when unsupported by socket net: flag sockets supporting msghdr originated zerocopy
-
- 22 Oct, 2022 9 commits
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - corsair-psu: Fix typo in USB id description, and add USB ID for new PSU - pwm-fan: Fix fan power handling when disabling fan control * tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (corsair-psu) Add USB id of the new HX1500i psu hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0 hwmon: (corsair-psu) fix typo in USB id description
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "RPM fix for qcom-cci, platform module alias for xiic, build warning fix for mlxbf, typo fixes in comments" * tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxbf: depend on ACPI; clean away ifdeffage i2c: fix spelling typos in comments i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter i2c: xiic: Add platform module alias
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fixes from Bjorn Helgaas: - Revert a simplification that broke pci-tegra due to a masking error - Update MAINTAINERS for Kishon's email address change and TI DRA7XX/J721E maintainer change * tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
-
Pavel Begunkov authored
The previous patch fails zerocopy send requests for protocols that don't support it, do the same for zerocopy sendmsg. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
If a protocol doesn't support zerocopy it will silently fall back to copying. This type of behaviour has always been a source of troubles so it's better to fail such requests instead. Cc: <stable@vger.kernel.org> # 6.0 Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We need an efficient way in io_uring to check whether a socket supports zerocopy with msghdr provided ubuf_info. Add a new flag into the struct socket flags fields. Cc: <stable@vger.kernel.org> # 6.0 Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Wilken Gottwalt authored
Also update the documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomainSigned-off-by: Guenter Roeck <linux@roeck-us.net>
-
Paolo Bonzini authored
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Fixes: 17601bfe ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option") Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-