The ethsw_add_vlan() function is already called only when the VLAN is
not yet configured on the switch. Remove the redundant check.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-8-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ethtool core already zeroes the memory before calling
.get_ethtool_stats() thus making the memset unnecessary. Remove it.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-7-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a bool instead of an u8 in ethsw_set_learning() and
ethsw_port_set_flood() to encode an binary type property.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-6-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since ethtool will be loud enough if the .set_link_ksettings() callback
fails, remove the debug messages which do not add additional
information.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-5-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the '\n' line terminator to the string formats missing it.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-4-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At probe time, only the DPSW object should be enabled without the
associated ports, which will get enabled on dev_open. Remove the
ethsw_open() and ethsw_stop() functions and replace them only with
dpsw_enable()/_disable().
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-3-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not add an IGMP multicast address by default since we do not support
Rx/Tx ar the moment.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1565700187-16048-2-git-send-email-ioana.ciornei@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable ret is initialized to a value that is never read and it is
re-assigned later. The initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190813124838.1317-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the checkpatch.pl script was run, it showed lines with length
more than 80 characters in rtl8712_recv.c file. Fixed by
breaking it up into two lines within 80 characters.
Signed-off-by: Merwin Trever Ferrao <merwintf@gmail.com>
Link: https://lore.kernel.org/r/20190813065806.GA23606@IoT-COESigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_dump_aggr_xframe from u8 to void as it
always returns _SUCCESS and its return value is never used.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190813044638.16348-4-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_xmitframe_aggr_1st from u8 to void as it
always returns _SUCCESS and its return value is never used.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190813044638.16348-3-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_append_mpdu_unit from u8 to void and remove
its return statement as it always returns only _SUCCESS. Modify call
sites to simply call this function instead of checking its return value,
and execute all the statements in the if-block for when the function
returns _SUCCESS.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190813044638.16348-2-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values of xmitframe_addmic from _SUCCESS and _FAIL to 0
and -ENOMEM respectively. Modify call sites to check for non-zero values
instead of _FAIL.
Also change return type from sint to int.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190813044638.16348-1-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The procfs provides many useful information for debugging, but it may be
too much for normal usage, routines like proc_get_sec_info() reports
various security related information.

So let's remove it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20190813042426.13733-1-kai.heng.feng@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kill all the remaining BUG_ON in EROFS:
 - one BUG_ON was used to detect xattr on-disk corruption,
   proper error handling should be added for it instead;
 - the other BUG_ONs are used to detect potential issues,
   use DBG_BUGON only in (eng) debugging version.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190813023054.73126-3-gaoxiang25@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cleancache was not fully implemented in EROFS.
In addition, it's tend to remove the whole cleancache in
related attempt [1].

[1] https://lore.kernel.org/linux-fsdevel/20190527103207.13287-3-jgross@suse.com/Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190813023054.73126-2-gaoxiang25@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As a helper in erofs_fs.h, erofs_inode_is_data_compressed()
should be inlined.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190813023054.73126-1-gaoxiang25@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This got caught by the implicit fall through detection but is
a bug rather than missing marking.

Reported-by: 0-DAY kernel test infrastructure
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 741172d1 ("iio: light: noa1305: Add support for NOA1305")
Link: https://lore.kernel.org/r/20190813133851.14345-1-Jonathan.Cameron@huawei.com
Cc: Gustavo Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.4 cycle

Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices.  Done from immutable branch.

A counter subsystem patche in here as well.

Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.

New device support
* adis16460
  - New driver based on ADIS framework which needed addition of support
    for cs_change_delay. Includes device tree binding.
* cros_ec
  - Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
  - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
  - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
  - New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
  - New driver for this ON Semiconductor Ambient light sensor.

Features and cleanups
* tree wide
  - Drop error prints after platform_get_irq as already prints errors
    internally if any occur.
* docs
  - Document mounting matrix.
  - Fix a missing newline at end of file.
* ad2s1210
  - Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
  - Add of_device_id array to explicity handling DT bindings.
* ad7606
  - Lots of rework leading to support for software configure modes in ad7616
    parts.
  - Debugfs register access support.
* am2315
  - Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
  - Typo in module description.
* cm36651
  - Convert to i2c_new_dummy_device.
  - Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
  - Calibscale support for accel, gyro and magnetometer.
  - Tidy up some error codes to return the error from the stack rather than
    -EIO.
  - Determine protocol version.
  - Add a sign vector to the core to fix sensor rotation if necessary.
    Cannot just be done with mount matrix as already in use in many devices.
  - Tidy up INFO_SCALE being in both the separate and shared lists.
  - Drop a lot of dplicate code from the cros-ec-accel-legacy driver
    and use the core provided code instead.
  - Make frequency range available to userspace.
* counter / ftm-quaddec
  - Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
  - Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
  - Use gpiod_set_value_cansleep as we don't care here and there is a
    board out there where it needs to sleep.
  - Switch to device managed APIs for all of probe and drop explict remove.
* hp03
  - Convert to i2c_new_dummy_device.
* maxim thermocouple
  - Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
  - Fix typo in constant naming.
* mpu6050
  - Use devm_add_action_or_reset in place of explicit error handling.
  - Make text in Kconfig more explicit about which parts are supported.
* mxc4005
  - Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
  - Convert device tree bindings to yaml.
  - Add a MAINTAINERS entry
* sc27xx
  - Introduce a local struct device *dev pointer to avoid lots of deref.
  - Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
  - Typo fix in naming.
* si1145
  - Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
  - Lots of rework to enable switch to regmap.
  - Regmap conversion at the end.
  - Tidy up some inconsistencies in buffer setup ops.
  - Tidy up an oddity by dropping get_irq_data_ready function in favour
    of direct access.
  - Stop allocating buffer in buffer enable in favour of just embedding
    a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
  - l3c device support (LSM6DSO and LSM6DSR)
  - tidy up irq return logic which was strangely written.
  - fix up an ABI quirk where this driver used separate scale
    attributes, even though they were always shared by type.
* stk33xx
  - Device tree bindings include manufacturer ID.
* stm32-adc
  - Add control for supply to analog switches including DT bindings.
* stm32 timer
  - Drop the quadrature mode support.  Believed there were no users so
    take this opportunity to drop this unwanted ABI.
* tsl2772
  - Switch to device mangage APIs for all of probe and drop explicit remove.
  - Use regulator_bulk_* APIs to reduce repitition.
* veml6070
  - Convert to i2c_new_dummy_device.

* tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits)
  iio: hi8435: Drop hi8435_remove() by using devres for remaining elements
  iio: hi8435: Use gpiod_set_value_cansleep()
  iio:st_sensors: remove buffer allocation at each buffer enable
  iio: imu: inv_mpu6050: be more explicit on supported chips
  iio: light: noa1305: Add support for NOA1305
  dt-bindings: Add binding document for NOA1305
  iio: remove get_irq_data_ready() function pointer and use IRQ number directly
  iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
  iio: tsl2772: Use regulator_bulk_() APIs
  iio: tsl2772: Use devm_iio_device_register
  iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  iio: tsl2772: Use devm_add_action_or_reset
  iio: Remove dev_err() usage after platform_get_irq()
  iio: light: si1145: Use device-managed APIs
  iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
  iio: imu: st_lsm6dsx: add support to ISM330DHCX
  ...

Used checkpatch's --fix-inplace option for types SPACING, OPEN_BRACE,
ELSE_AFTER_BRACE. Manually edited the resulting changes to correct for
mistaken fixes and complete fixes that were only partially applied.
Signed-off-by: Stephen Brennan <stephen@brennan.io>
Link: https://lore.kernel.org/r/20190811225120.7308-1-stephen@brennan.ioSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_construct_txaggr_cmd_hdr from u8 to void as
it always returns _SUCCESS and its return value is never used.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-8-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_construct_txaggr_cmd_desc from u8 to void
(and remove its return statement) as it always returns _SUCCESS and its
return value is never stored, checked or otherwise used.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-7-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_xmit_direct from int to void as its return
value is never used. Remove return statement accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-6-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return type of r8712_free_xmitbuf from int to void (and remove
its return values) as its return value is never used.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-5-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values of make_wlanhdr from _SUCCESS/_FAIL to 0/-EINVAL.
Modify call site to check for non-zero return values instead of _FAIL.
Change return type from sint to int.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-4-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values of r8712_update_attrib from _SUCCESS and _FAIL to 0
and -ENOMEM or -EINVAL respectively. Modify call site to check for the
new failure conditions. Also modify the return type from sint to int.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-2-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the return values in _r8712_init_xmit_priv from _SUCCESS/_FAIL to
0/-ENOMEM respectively. Change return type from sint to int.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190809052353.5308-1-nishkadg.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

return -EIO for bus failures, 0 otherwise.
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20190809182510.22443-3-adham.abozaeid@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Send abort request to WILC from wilc_wlan_stop instead of resetting the
CPU.
The abort request was being sent from wilc_wlan_cleanup after the CPU
was reset which wasn't the correct order. The abort request handler
in the chip will take care of resetting the CPU.
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20190809182510.22443-2-adham.abozaeid@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the iio/staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull dax fixes from Dan Williams:
 "A filesystem-dax and device-dax fix for v5.3.

  The filesystem-dax fix is tagged for stable as the implementation has
  been mistakenly throwing away all cow pages on any truncate or hole
  punch operation as part of the solution to coordinate device-dma vs
  truncate to dax pages.

  The device-dax change fixes up a regression this cycle from the
  introduction of a common 'internal per-cpu-ref' implementation.

  Summary:

   - Fix dax_layout_busy_page() to not discard private cow pages of
     fs/dax private mappings.

   - Update the memremap_pages core to properly cleanup on behalf of
     internal reference-count users like device-dax"

* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  mm/memremap: Fix reuse of pgmap instances with internal references
  dax: dax_layout_busy_page() should not unmap cow pages

Pull NTB fix from Jon Mason:
 "Bug fix for NTB MSI kernel compile warning"

* tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb:
  NTB/msi: remove incorrect MODULE defines

Convert the remainder of hi8435_probe() to use devres and get rid of
hi8435_remove().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: Chris Healy <cphealy@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use gpiod_set_value_cansleep() instead of gpiod_set_value() to support
the case when reset pin is connected to a GPIO expander. See ZII VF610
SCU4 AIB for one such example.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch is removing the buffer allocation at each buffer enable.
We just allocate enough memory in the main structure during probe
to cover maximum size needed (that anyway is pretty small) [16bytes].
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull RISC-V updates from Paul Walmsley:
 "A few minor RISC-V updates for v5.3-rc4:

   - Remove __udivdi3() from the 32-bit Linux port, converting the only
     upstream user to use do_div(), per Linux policy

   - Convert the RISC-V standard clocksource away from per-cpu data
     structures, since only one is used by Linux, even on a multi-CPU
     system

   - A set of DT binding updates that remove an obsolete text binding in
     favor of a YAML binding, fix a bogus compatible string in the
     schema (thus fixing a "make dtbs_check" warning), and clarifies the
     future values expected in one of the RISC-V CPU properties"

* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
  dt-bindings: riscv: remove obsolete cpus.txt
  RISC-V: Remove udivdi3
  riscv: delay: use do_div() instead of __udivdi3()
  dt-bindings: Update the riscv,isa string description
  RISC-V: Remove per cpu clocksource

Pull x86 fixes from Thomas Gleixner:
 "A few fixes for x86:

   - Don't reset the carefully adjusted build flags for the purgatory
     and remove the unwanted flags instead. The 'reset all' approach led
     to build fails under certain circumstances.

   - Unbreak CLANG build of the purgatory by avoiding the builtin
     memcpy/memset implementations.

   - Address missing prototype warnings by including the proper header

   - Fix yet more fall-through issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib/cpu: Address missing prototypes warning
  x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
  x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
  x86: mtrr: cyrix: Mark expected switch fall-through
  x86/ptrace: Mark expected switch fall-through

Pull perf tooling fixes from Thomas Gleixner:
 "Perf tooling fixes all over the place:

   - Fix the selection of the main thread COMM in db-export

   - Fix the disassemmbly display for BPF in annotate

   - Fix cpumap mask setup in perf ftrace when only one CPU is present

   - Add the missing 'cpu_clk_unhalted.core' event

   - Fix CPU 0 bindings in NUMA benchmarks

   - Fix the module size calculations for s390

   - Handle the gap between kernel end and module start on s390
     correctly

   - Build and typo fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
  perf annotate: Fix s390 gap between kernel end and module start
  perf record: Fix module size on s390
  perf tools: Fix include paths in ui directory
  perf tools: Fix a typo in a variable name in the Documentation Makefile
  perf cpumap: Fix writing to illegal memory in handling cpumap mask
  perf ftrace: Fix failure to set cpumask when only one cpu is present
  perf db-export: Fix thread__exec_comm()
  perf annotate: Fix printing of unaugmented disassembled instructions from BPF
  perf bench numa: Fix cpu0 binding

Pull scheduler fixes from Thomas Gleixner:
 "Three fixlets for the scheduler:

   - Avoid double bandwidth accounting in the push & pull code

   - Use a sane FIFO priority for the Pressure Stall Information (PSI)
     thread.

   - Avoid permission checks when setting the scheduler params for the
     PSI thread"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: Do not require setsched permission from the trigger creator
  sched/psi: Reduce psimon FIFO priority
  sched/deadline: Fix double accounting of rq/running bw in push & pull