Pull arm64 updates from Will Deacon:
 "Although there isn't tonnes of code in terms of line count, there are
  a fair few headline features which I've noted both in the tag and also
  in the merge commits when I pulled everything together.

  The part I'm most pleased with is that we had 35 contributors this
  time around, which feels like a big jump from the usual small group of
  core arm64 arch developers. Hopefully they all enjoyed it so much that
  they'll continue to contribute, but we'll see.

  It's probably worth highlighting that we've pulled in a branch from
  the risc-v folks which moves our CPU topology code out to where it can
  be shared with others.

  Summary:

   - 52-bit virtual addressing in the kernel

   - New ABI to allow tagged user pointers to be dereferenced by
     syscalls

   - Early RNG seeding by the bootloader

   - Improve robustness of SMP boot

   - Fix TLB invalidation in light of recent architectural
     clarifications

   - Support for i.MX8 DDR PMU

   - Remove direct LSE instruction patching in favour of static keys

   - Function error injection using kprobes

   - Support for the PPTT "thread" flag introduced by ACPI 6.3

   - Move PSCI idle code into proper cpuidle driver

   - Relaxation of implicit I/O memory barriers

   - Build with RELR relocations when toolchain supports them

   - Numerous cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
  arm64: remove __iounmap
  arm64: atomics: Use K constraint when toolchain appears to support it
  arm64: atomics: Undefine internal macros after use
  arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
  arm64: asm: Kill 'asm/atomic_arch.h'
  arm64: lse: Remove unused 'alt_lse' assembly macro
  arm64: atomics: Remove atomic_ll_sc compilation unit
  arm64: avoid using hard-coded registers for LSE atomics
  arm64: atomics: avoid out-of-line ll/sc atomics
  arm64: Use correct ll/sc atomic constraints
  jump_label: Don't warn on __exit jump entries
  docs/perf: Add documentation for the i.MX8 DDR PMU
  perf/imx_ddr: Add support for AXI ID filtering
  arm64: kpti: ensure patched kernel text is fetched from PoU
  arm64: fix fixmap copy for 16K pages and 48-bit VA
  perf/smmuv3: Validate groups for global filtering
  perf/smmuv3: Validate group size
  arm64: Relax Documentation/arm64/tagged-pointers.rst
  arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
  arm64: mm: Ignore spurious translation faults taken from the kernel
  ...

Pull iommu updates from Joerg Roedel:

 - batched unmap support for the IOMMU-API

 - support for unlocked command queueing in the ARM-SMMU driver

 - rework the ATS support in the ARM-SMMU driver

 - more refactoring in the ARM-SMMU driver to support hardware
   implemention specific quirks and errata

 - bounce buffering DMA-API implementatation in the Intel VT-d driver
   for untrusted devices (like Thunderbolt devices)

 - fixes for runtime PM support in the OMAP iommu driver

 - MT8183 IOMMU support in the Mediatek IOMMU driver

 - rework of the way the IOMMU core sets the default domain type for
   groups. Changing the default domain type on x86 does not require two
   kernel parameters anymore.

 - more smaller fixes and cleanups

* tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits)
  iommu/vt-d: Declare Broadwell igfx dmar support snafu
  iommu/vt-d: Add Scalable Mode fault information
  iommu/vt-d: Use bounce buffer for untrusted devices
  iommu/vt-d: Add trace events for device dma map/unmap
  iommu/vt-d: Don't switch off swiotlb if bounce page is used
  iommu/vt-d: Check whether device requires bounce buffer
  swiotlb: Split size parameter to map/unmap APIs
  iommu/omap: Mark pm functions __maybe_unused
  iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3
  iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order
  iommu: Don't use sme_active() in generic code
  iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS
  iommu/qcom: Use struct_size() helper
  iommu: Remove wrong default domain comments
  iommu/dma: Fix for dereferencing before null checking
  iommu/mediatek: Clean up struct mtk_smi_iommu
  memory: mtk-smi: Get rid of need_larbid
  iommu/mediatek: Fix VLD_PA_RNG register backup when suspend
  memory: mtk-smi: Add bus_sel for mt8183
  memory: mtk-smi: Invoke pm runtime_callback to enable clocks
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of changes in the GPIO subsystem for the v5.4 kernel
  cycle.

  Core changes:

   - Support hierarchical GPIO irqchips.

     We now have three consumers that can use this: Intel IXP4xx,
     ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem).

     The support code has been long in the making and hashed out so it
     should be easily adaptable for all hierarchical irqchip parents.
     The code only gets compiled in if hierarchical irqchip is used at
     the topmost irq controller at least, as the hierarchical irqchip
     requires strict hierarchy all the way up in the system.

   - Determine the need for a "valid_mask" for GPIO lines on the
     gpio_chip and conversely for the "valid_mask" for the GPIO
     interrupt chip interrupt lines by looking for a .init_valid_mask()
     callback in the main chip or GPIO interrupt chip respectively.
     Allocate it with bitmap_alloc().

   - Isolate the device tree/open firmware GPIO description code out in
     its own file properly.

   - Isolate the ACPI GPIO description code out in its own file
     properly.

   - Drop a whole lot of #ifdef:s in the main includes: it does not hurt
     to keep the include items around, and we get quicker and clearer
     compile failures if the appropriate kernel symbols are not selected
     for drivers.

  New/deleted drivers:

   - New driver for Aspeed SGPIO.

   - The KS8695 driver is deleted as the platform gets deleted from
     arch/arm in this kernel cycle.

   - The Cirrus Logic Madera driver now supports CS47L92 and CS47L15.

   - The Freescale MPC8xxx now supports LS1028A and LS1088A.

  Driver improvements:

   - We pass the GPIO irqchip intialization by directly filling in the
     struct instead of using set-up functions (the new way) for Intel
     MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86,
     MT7621, Zynq and EP93xx.

  Out-of-band changes:

   - Fix a GPIO header inclusion in Unicore - no response from
     maintainer.

   - Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree
     last cycle so let's mop up the shards"

* tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits)
  gpiolib: of: add a fallback for wlf,reset GPIO name
  gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq()
  gpio: remove explicit comparison with 0
  gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code
  gpio: devres: Switch to EXPORT_SYMBOL_GPL()
  gpio: of: Switch to EXPORT_SYMBOL_GPL()
  gpio: of: Make of_gpio_simple_xlate() private
  gpio: of: Make of_get_named_gpiod_flags() private
  gpio: aspeed: Add in ast2600 details to Aspeed driver
  gpio: aspeed: Use ngpio property from device tree if available
  gpio: aspeed: Setup irqchip dynamically
  gpio/aspeed: Fix incorrect number of banks
  gpio: aspeed: Update documentation with ast2600 controllers
  gpio: Initialize the irqchip valid_mask with a callback
  gpiolib: acpi: make acpi_can_fallback_to_crs() static
  gpio: Fix further merge errors
  gpio: Fix up merge collision in include file
  gpio: of: Normalize return code variable name
  gpio: gpiolib: Normalize return code variable name
  gpio: ep93xx: Pass irqchip when adding gpiochip
  ...

Pull i3c updates from Boris Brezillon:
 "Core changes:

   - Export i3c_device_match_id() so driver can get per-device data

   - Add addr and lvr fields to i2c_dev_desc so we can attach I2C
     devices that are not described in the DT

   - Add a missing of_node_put()

   - Fix a memory leak

   - Use dev_to_i3cmaster() instead of open-coding it

  Driver changes:

   - Use for_each_set_bit() in the Cadence driver"

* tag 'i3c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: Use dev_to_i3cmaster()
  i3c: master: fix a memory leak bug
  i3c: add addr and lvr to i2c_dev_desc structure
  i3c: master: cdns: Use for_each_set_bit()
  i3c: master: Add of_node_put() before return
  i3c: move i3c_device_match_id to device.c and export it

Pull spi updates from Mark Brown:
 "The big theme for this release has been performance, we've had a
  series of unrelated overhauls of a few drivers all with a big
  peformance component.

  Otherwise it's been relatively quiet, highlights include:

   - A big overhaul of the spi-fsl-dspi driver improving the code
     quality, performance and stability from Vladimir Oltean.

   - A big performance enhancement for the bc2835 (Raspberry Pi) driver
     for unidirectional transfers from Lukas Wunner.

   - Improved performance on small transfers for the uniphier driver
     from Keiji Hayashibara.

   - Lots of coccinelle generated cleanups from Yue Haibing.

   - New device support for Freescale ls2080a and Nuvoton NPCM FIU"

* tag 'spi-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (102 commits)
  spi: mediatek: support large PA
  spi: mediatek: add spi support for mt6765 IC
  dt-bindings: spi: update bindings for MT6765 SoC
  spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO
  spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO
  dmaengine: bcm2835: Avoid accessing memory when copying zeroes
  spi: bcm2835: Cache CS register value for ->prepare_message()
  dmaengine: bcm2835: Document struct bcm2835_dmadev
  spi: Guarantee cacheline alignment of driver-private data
  dmaengine: bcm2835: Allow reusable descriptors
  dmaengine: bcm2835: Allow cyclic transactions without interrupt
  spi: bcm2835: Drop dma_pending flag
  spi: bcm2835: Work around DONE bit erratum
  spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
  spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
  spi: npcm-fiu: remove set but not used variable 'retlen'
  spi: fsl-spi: use devm_platform_ioremap_resource() to simplify code
  spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code
  spi: zynqmp: use devm_platform_ioremap_resource() to simplify code
  spi: xlp: use devm_platform_ioremap_resource() to simplify code
  ...

Pull regulator updates from Mark Brown:
 "A small update for the regualtor API for this cycle, some small fixes
  and a bunch of new devices but none of them very big.

  The most stand out thing is the regulator-fixed-clock driver which is
  for regulators where the enable control is done by using a clock
  instead of a GPIO or register write, a novel hardware design that had
  not previously come up.

  Summary:

   - Added a keyword pattern for regulator_get_optional() since usage of
     that API generally needs extra review.

   - Operating mode and suspend state support for act8865.

   - New device support for Active Semiconductor ACT8600 chargers,
     Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
     Synoptics SY20276, SY20278 and SY8824E"

* tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: core: Fix error return for /sys access
  regulator: da9211: fix obtaining "enable" GPIO
  regulator: max77686: fix obtaining "maxim,ena" GPIO
  regulator: uniphier: Add Pro5 USB3 VBUS support
  dt-bindings: regulator: add regulator-fixed-clock binding
  regulator: fixed: add possibility to enable by clock
  regulator: s2mps11: Consistently use local variable
  regulator: lp87565: Simplify lp87565_buck_set_ramp_delay
  regulator: slg51000: use devm_gpiod_get_optional() in probe
  regulator: lp8788-ldo: make array en_mask static const, makes object smaller
  regulator: tps65132: Stop parsing DT when gpio is not found
  regulator: Defer init completion for a while after late_initcall
  regulator: add missing 'static inline' to a helper's stub
  regulator: provide regulator_bulk_set_supply_names()
  MAINTAINERS: Add keyword pattern on regulator_get_optional()
  regulator: sy8824x: add prefixes to BUCK_EN and MODE macros
  regulator: sy8824x: use c++style for the comment block near SPDX
  regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge
  regulator: mt6358: Add support for MT6358 regulator
  regulator: Add document for MT6358 regulator
  ...

Pull regmap updates from Mark Brown:
 "Only two changes for this release, one fix for error handling with
  runtime PM and a change from Greg removing error handling from debugfs
  API calls now that they implement user visible error reporting"

* tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Correct error paths in regmap_irq_thread for pm_runtime
  regmap: no need to check return value of debugfs_create functions

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Inspur Power System power supply driver
   - Synaptics AS370 PVT sensor driver

  Chip support:
   - support SHTC3 in shtc1 driver
   - support NCT6116 in nct6775 driver
   - support AMD family 17h, model 70h CPUs in k10temp driver
   - support PCT2075 in lm75 driver

  Removed drivers:
   - ads1015 driver (now supported in iio)

  Other changes:
   - Convert drivers to use devm_i2c_new_dummy_device
   - Substantial structural improvements in lm75 driver adding support
     for writing sample interval for supported chips
   - Add support for PSU version 2 to ibm-cffps driver
   - Add support for power attribute to iio_hwmon bridge
   - Add support for additional fan, voltage and temperature attributes
     to nct7904 driver
   - Convert adt7475 driver to use hwmon_device_register_with_groups()
   - Convert k8temp driver to use hwmon_device_register_with_info()
   - Various other improvements and minor fixes"

* tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
  hwmon: submitting-patches: Add note on comment style
  hwmon: submitting-patches: Point to with_info API
  hwmon: (nct7904) Fix incorrect SMI status register setting of LTD temperature and fan.
  hwmon: (shtc1) add support for the SHTC3 sensor
  hwmon: (shtc1) fix shtc1 and shtw1 id mask
  hwmon: (lm75) Aproximate sample times to data-sheet values
  hwmon: (w83793d) convert to use devm_i2c_new_dummy_device
  hwmon: (w83792d) convert to use devm_i2c_new_dummy_device
  hwmon: (w83791d) convert to use devm_i2c_new_dummy_device
  hwmon: (as370-hwmon) fix devm_platform_ioremap_resource.cocci warnings
  hwmon: (lm75) Add support for writing sampling period on PCT2075
  hwmon: (lm75) Add support for writing conversion time for TMP112
  hwmon: (lm75) Move updating the sample interval to its own function
  hwmon: (lm75) Support configuring the sample time for various chips
  hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD.
  hwmon: (as370-hwmon) Add DT bindings for Synaptics AS370 PVT
  hwmon: Add Synaptics AS370 PVT sensor driver
  pmbus: (ibm-cffps) Add support for version 2 of the PSU
  dt-bindings: hwmon: Document ibm,cffps2 compatible string
  hwmon: (iio_hwmon) Enable power exporting from IIO
  ...

Pull RAS updates from Borislav Petkov:
 "The latest meager RAS updates:

   - Enable processing of action-optional MCEs which have the Overflow
     bit set (Tony Luck)

   - -Wmissing-prototypes warning fix and a build fix (Valdis
     Klētnieks)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  RAS: Build debugfs.o only when enabled in Kconfig
  RAS: Fix prototype warnings
  x86/mce: Don't check for the overflow bit on action optional machine checks

Pull EDAC updates from Borislav Petkov:
 "The new thing this time around is that we have three maintainers now
  and a new, old repo. New because it is new for the EDAC tree which is
  hosted there from now on and old because it is Tony's and mine's old
  RAS repo which we still use occasionally when the stuff isn't in tip.

  Summary:

   -  EDAC tree has three maintainers and one new designated reviewer
      now, so that the work can scale better.

   -  New driver for Mellanox' BlueField SoC DDR controller (Shravan
      Kumar Ramani)

   -  AMD Rome support in amd64_edac (Yazen Ghannam and Isaac Vaughn)

   -  Misc fixes, cleanups and code improvements"

* tag 'edac_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Add PCI device IDs for family 17h, model 70h
  MAINTAINERS: Add Robert as a EDAC reviewer
  EDAC/mc_sysfs: Make debug messages consistent
  EDAC/mc_sysfs: Remove pointless gotos
  EDAC: Prefer 'unsigned int' to bare use of 'unsigned'
  EDAC/amd64: Support asymmetric dual-rank DIMMs
  EDAC/amd64: Cache secondary Chip Select registers
  EDAC/amd64: Decode syndrome before translating address
  EDAC/amd64: Find Chip Select memory size using Address Mask
  EDAC/amd64: Initialize DIMM info for systems with more than two channels
  EDAC/amd64: Recognize DRAM device type ECC capability
  EDAC/amd64: Support more than two controllers for chip selects handling
  EDAC/mc: Cleanup _edac_mc_free() code
  EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()
  EDAC, mellanox: Add ECC support for BlueField DDR4
  EDAC/altera: Use the proper type for the IRQ status bits
  EDAC/mc: Fix grain_bits calculation
  edac: altera: Move Stratix10 SDRAM ECC to peripheral
  MAINTAINERS: update EDAC entry to reflect current tree and maintainers

Pull tpm updates from Jarkko Sakkinen:
 "A new driver for fTPM living inside ARM TEE was added this round.

  In addition to that, there are three bug fixes and one clean up"

* tag 'tpmdd-next-20190902' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm/tpm_ftpm_tee: Document fTPM TEE driver
  tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE
  tpm: Remove a deprecated comments about implicit sysfs locking
  tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts
  tpm_tis_core: Turn on the TPM before probing IRQ's
  MAINTAINERS: fix style in KEYS-TRUSTED entry

Pull pidfd/waitid updates from Christian Brauner:
 "This contains two features and various tests.

  First, it adds support for waiting on process through pidfds by adding
  the P_PIDFD type to the waitid() syscall. This completes the basic
  functionality of the pidfd api (cf. [1]). In the meantime we also have
  a new adition to the userspace projects that make use of the pidfd
  api. The qt project was nice enough to send a mail pointing out that
  they have a pr up to switch to the pidfd api (cf. [2]).

  Second, this tag contains an extension to the waitid() syscall to make
  it possible to wait on the current process group in a race free manner
  (even though the actual problem is very unlikely) by specifing 0
  together with the P_PGID type. This extension traces back to a
  discussion on the glibc development mailing list.

  There are also a range of tests for the features above. Additionally,
  the test-suite which detected the pidfd-polling race we fixed in [3]
  is included in this tag"

[1] https://lwn.net/Articles/794707/
[2] https://codereview.qt-project.org/c/qt/qtbase/+/108456
[3] commit b191d649 ("pidfd: fix a poll race when setting exit_state")

* tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  waitid: Add support for waiting for the current process group
  tests: add pidfd poll tests
  tests: move common definitions and functions into pidfd.h
  pidfd: add pidfd_wait tests
  pidfd: add P_PIDFD to waitid()

This reverts commit b03755ad.

This is sad, and done for all the wrong reasons.  Because that commit is
good, and does exactly what it says: avoids a lot of small disk requests
for the inode table read-ahead.

However, it turns out that it causes an entirely unrelated problem: the
getrandom() system call was introduced back in 2014 by commit
c6e9d6f3 ("random: introduce getrandom(2) system call"), and people
use it as a convenient source of good random numbers.

But part of the current semantics for getrandom() is that it waits for
the entropy pool to fill at least partially (unlike /dev/urandom).  And
at least ArchLinux apparently has a systemd that uses getrandom() at
boot time, and the improvements in IO patterns means that existing
installations suddenly start hanging, waiting for entropy that will
never happen.

It seems to be an unlucky combination of not _quite_ enough entropy,
together with a particular systemd version and configuration.  Lennart
says that the systemd-random-seed process (which is what does this early
access) is supposed to not block any other boot activity, but sadly that
doesn't actually seem to be the case (possibly due bogus dependencies on
cryptsetup for encrypted swapspace).

The correct fix is to fix getrandom() to not block when it's not
appropriate, but that fix is going to take a lot more discussion.  Do we
just make it act like /dev/urandom by default, and add a new flag for
"wait for entropy"? Do we add a boot-time option? Or do we just limit
the amount of time it will wait for entropy?

So in the meantime, we do the revert to give us time to discuss the
eventual fix for the fundamental problem, at which point we can re-apply
the ext4 inode table access optimization.
Reported-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fixes from Paolo Bonzini:
 "The main change here is a revert of reverts. We recently simplified
  some code that was thought unnecessary; however, since then KVM has
  grown quite a few cond_resched()s and for that reason the simplified
  code is prone to livelocks---one CPUs tries to empty a list of guest
  page tables while the others keep adding to them. This adds back the
  generation-based zapping of guest page tables, which was not
  unnecessary after all.

  On top of this, there is a fix for a kernel memory leak and a couple
  of s390 fixlets as well"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
  KVM: x86: work around leak of uninitialized stack contents
  KVM: nVMX: handle page fault in vmread
  KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl
  KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()

Pull virtio fix from Michael Tsirkin:
 "A last minute revert

  The 32-bit build got broken by the latest defence in depth patch.
  Revert and we'll try again in the next cycle"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  Revert "vhost: block speculation of translated descriptors"

Pull RISC-V fix from Paul Walmsley:
 "Last week, Palmer and I learned that there was an error in the RISC-V
  kernel image header format that could make it less compatible with the
  ARM64 kernel image header format. I had missed this error during my
  original reviews of the patch.

  The kernel image header format is an interface that impacts
  bootloaders, QEMU, and other user tools. Those packages must be
  updated to align with whatever is merged in the kernel. We would like
  to avoid proliferating these image formats by keeping the RISC-V
  header as close as possible to the existing ARM64 header. Since the
  arch/riscv patch that adds support for the image header was merged
  with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add
  an Image header that boot loader can parse."), we think it wise to try
  to fix this error before v5.3 is released.

  The fix itself should be backwards-compatible with any project that
  has already merged support for premature versions of this interface.
  It primarily involves ensuring that the RISC-V image header has
  something useful in the same field as the ARM64 image header"

* tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: modify the Image header to improve compatibility with the ARM64 header

This reverts commit a89db445.

I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull networking fixes from David Miller:

 1) Don't corrupt xfrm_interface parms before validation, from Nicolas
    Dichtel.

 2) Revert use of usb-wakeup in btusb, from Mario Limonciello.

 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
    Leonardo Bras.

 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.

 5) Missing ULP check in sock_map, from John Fastabend.

 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.

 7) Fix length of SKB allocated in 6pack driver, from Christophe
    JAILLET.

 8) ip6_route_info_create() returns an error pointer, not NULL. From
    Maciej Żenczykowski.

 9) Only add RDS sock to the hashes after rs_transport is set, from
    Ka-Cheong Poon.

10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.

11) Presence of transmit IPSEC offload in an SKB is not tested for
    correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
    Kirsher.

12) Need rcu_barrier() when register_netdevice() takes one of the
    notifier based failure paths, from Subash Abhinov Kasiviswanathan.

13) Fix leak in sctp_do_bind(), from Mao Wenan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  cdc_ether: fix rndis support for Mediatek based smartphones
  sctp: destroy bucket if failed to bind addr
  sctp: remove redundant assignment when call sctp_get_port_local
  sctp: change return type of sctp_get_port_local
  ixgbevf: Fix secpath usage for IPsec Tx offload
  sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
  ixgbe: Fix secpath usage for IPsec TX offload.
  net: qrtr: fix memort leak in qrtr_tun_write_iter
  net: Fix null de-reference of device refcount
  ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
  tun: fix use-after-free when register netdev failed
  tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
  ixgbe: fix double clean of Tx descriptors with xdp
  ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
  mlx4: fix spelling mistake "veify" -> "verify"
  net: hns3: fix spelling mistake "undeflow" -> "underflow"
  net: lmc: fix spelling mistake "runnin" -> "running"
  NFC: st95hf: fix spelling mistake "receieve" -> "receive"
  net/rds: An rds_sock is added too early to the hash table
  mac80211: Do not send Layer 2 Update frame before authorization
  ...

Pull MMC fixes from Ulf Hansson:

 - tmio: Fixup runtime PM management during probe and remove

 - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC

 - bcm2835: Prevent lockups when terminating work

* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: tmio: Fixup runtime PM management during remove
  mmc: tmio: Fixup runtime PM management during probe
  Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
  Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
  Revert "mmc: bcm2835: Terminate timeout work synchronously"

Pull drm fixes from Dave Airlie:
 "From the maintainer summit, just some last minute fixes for final:

  lima:
   - fix gem_wait ioctl

  core:
   - constify modes list

  i915:
   - DP MST high color depth regression
   - GPU hangs on vulkan compute workloads"

* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
  drm/lima: fix lima_gem_wait() return value
  drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
  drm/i915: Limit MST to <= 8bpc once again
  drm/modes: Make the whitelist more const

Merge tag 'kvm-s390-master-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fixes for 5.3

- prevent a user triggerable oops in the migration code
- do not leak kernel stack content

James Harvey reported a livelock that was introduced by commit
d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").

The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages.  With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule.  The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (4e103134, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.

There are three ways to fix the livelock:

- Reverting the revert (commit d012a06a) is not a viable option as
  the revert is needed to fix a regression that occurs when the guest has
  one or more assigned devices.  It's unlikely we'll root cause the device
  assignment regression soon enough to fix the regression timely.

- Remove the conditional reschedule from kvm_mmu_zap_all().  However, although
  removing the reschedule would be a smaller code change, it's less safe
  in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
  the wild for flushing memslots since the fast invalidate mechanism was
  introduced by commit 6ca18b69 ("KVM: x86: use the fast way to
  invalidate all pages"), back in 2013.

- Reintroduce the fast invalidate mechanism and use it when zapping shadow
  pages in response to a memslot being deleted/moved, which is what this
  patch does.

For all intents and purposes, this is a revert of commit ea145aac
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit 7390de1e ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit 5304b8d3 ("KVM:
MMU: fast invalidate all pages") and commit 6ca18b69 ("KVM: x86:
use the fast way to invalidate all pages") respectively.

Fixes: d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header.  One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field.  If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0.  This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format.  Another problem was that the original
"res3" field was not being initialized correctly to zero.

Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field.  RISC-V binaries will
store "RSC\x05" in this field.  The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time.  Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly.  Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t

A Mediatek based smartphone owner reports problems with USB
tethering in Linux.  The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled.  The same applies to the two
types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:

0e8d:000a  Mediatek Crosscall Spider X5 3G Phone

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1

and

19d2:1023  ZTE K4201-z

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1

The Mediatek example is believed to apply to most smartphones with
Mediatek firmware.  The ZTE example is most likely also part of a larger
family of devices/firmwares.
Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mao Wenan says:

====================
fix memory leak for sctp_do_bind

First two patches are to do cleanup, remove redundant assignment,
and change return type of sctp_get_port_local.
Third patch is to fix memory leak for sctp_do_bind if failed
to bind address.

v2: add one patch to change return type of sctp_get_port_local.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is one memory leak bug report:
BUG: memory leak
unreferenced object 0xffff8881dc4c5ec0 (size 40):
  comm "syz-executor.0", pid 5673, jiffies 4298198457 (age 27.578s)
  hex dump (first 32 bytes):
    02 00 00 00 81 88 ff ff 00 00 00 00 00 00 00 00  ................
    f8 63 3d c1 81 88 ff ff 00 00 00 00 00 00 00 00  .c=.............
  backtrace:
    [<0000000072006339>] sctp_get_port_local+0x2a1/0xa00 [sctp]
    [<00000000c7b379ec>] sctp_do_bind+0x176/0x2c0 [sctp]
    [<000000005be274a2>] sctp_bind+0x5a/0x80 [sctp]
    [<00000000b66b4044>] inet6_bind+0x59/0xd0 [ipv6]
    [<00000000c68c7f42>] __sys_bind+0x120/0x1f0 net/socket.c:1647
    [<000000004513635b>] __do_sys_bind net/socket.c:1658 [inline]
    [<000000004513635b>] __se_sys_bind net/socket.c:1656 [inline]
    [<000000004513635b>] __x64_sys_bind+0x3e/0x50 net/socket.c:1656
    [<0000000061f2501e>] do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
    [<0000000003d1e05e>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is because in sctp_do_bind, if sctp_get_port_local is to
create hash bucket successfully, and sctp_add_bind_addr failed
to bind address, e.g return -ENOMEM, so memory leak found, it
needs to destroy allocated bucket.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are more parentheses in if clause when call sctp_get_port_local
in sctp_do_bind, and redundant assignment to 'ret'. This patch is to
do cleanup.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently sctp_get_port_local() returns a long
which is either 0,1 or a pointer casted to long.
It's neither of the callers use the return value since
commit 62208f12 ("net: sctp: simplify sctp_get_port").
Now two callers are sctp_get_port and sctp_do_bind,
they actually assumend a casted to an int was the same as
a pointer casted to a long, and they don't save the return
value just check whether it is zero or non-zero, so
it would better change return type from long to int for
sctp_get_port_local.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Port the same fix for ixgbe to ixgbevf.

The ixgbevf driver currently does IPsec Tx offloading
based on an existing secpath. However, the secpath
can also come from the Rx side, in this case it is
misinterpreted for Tx offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for Tx offload.

CC: Shannon Nelson <snelson@pensando.io>
Fixes: 7f68d430 ("ixgbevf: enable VF IPsec offload operations")
Reported-by: Jonathan Tooker <jonathan@reliablehosting.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ask for standard multi-line comments, and ask for consistent
comment style.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

New driver should use devm_hwmon_device_register_with_info() or
hwmon_device_register_with_info() to register with the hwmon subsystem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Accessing the device when it may be runtime suspended is a bug, which is
the case in tmio_mmc_host_remove(). Let's fix the behaviour.

Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the
runtime PM status of the device, as to make it reflect the current status
of the HW. This works fine for most cases, but unfortunate not for all.
Especially, there is a generic problem when the device has a genpd attached
and that genpd have the ->start|stop() callbacks assigned.

More precisely, if the driver calls pm_runtime_set_active() during
->probe(), genpd does not get to invoke the ->start() callback for it,
which means the HW isn't really fully powered on. Furthermore, in the next
phase, when the device becomes runtime suspended, genpd will invoke the
->stop() callback for it, potentially leading to usage count imbalance
problems, depending on what's implemented behind the callbacks of course.

To fix this problem, convert to call pm_runtime_get_sync() from
tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to
avoid bumping usage counters and unnecessary re-initializing the HW the
first time the tmio driver's ->runtime_resume() callback is called,
introduce a state flag to keeping track of this.

Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

This reverts commit 7ff21319.

It turns out that the above commit introduces other problems. For example,
calling pm_runtime_set_active() must not be done prior calling
pm_runtime_enable() as that makes it fail. This leads to additional
problems, such as clock enables being wrongly balanced.

Rather than fixing the problem on top, let's start over by doing a revert.

Fixes: 7ff21319 ("mmc: tmio: move runtime PM enablement to the driver implementations")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

Add spi large PA(max=64G) support for DMA transfer.
Signed-off-by: luhua.xu <luhua.xu@mediatek.com>
Link: https://lore.kernel.org/r/1568195731-3239-4-git-send-email-luhua.xu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>