- 28 Mar, 2022 5 commits
-
-
Andrey Grodzovsky authored
Fixes the warning. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220328132532.406572-1-andrey.grodzovsky@amd.com
-
Xin Ji authored
As downstream sink was set into standby mode while bridge disabled, this patch used for setting downstream sink into normal status while enable bridge. Signed-off-by:
Xin Ji <xji@analogixsemi.com> Reviewed-by:
Pin-Yen Lin <treapking@chromium.org> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220322080213.1487134-1-xji@analogixsemi.com
-
Ivaylo Dimitrov authored
On devices with DMM, all allocations are done through either DMM or TILER. DMM/TILER being a limited resource means that such allocations will start to fail before actual free memory is exhausted. What is even worse is that with time DMM/TILER space gets fragmented to the point that even if we have enough free DMM/TILER space and free memory, allocation fails because there is no big enough free block in DMM/TILER space. Such failures can be easily observed with OMAP xorg DDX, for example - starting few GUI applications (so buffers for their windows are allocated) and then rotating landscape<->portrait while closing and opening new windows soon results in allocation failures. Fix that by mapping buffers through DMM/TILER only when really needed, like, for scanout buffers. Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com
-
Ivaylo Dimitrov authored
Currently code allocates non-scanout BOs from SHMEM and those objects are accessible to userspace by mmap(). However, on devices with no DMM (like OMAP3), the same objects are not accessible by kernel drivers that want to render to them as code refuses to export them. In turn this means that on devices with no DMM, all buffers must be allocated as scanout, otherwise only CPU can access them. On those devices, scanout buffers are allocated from CMA, making those allocations highly unreliable. Fix that by implementing functionality to export SHMEM backed buffers on devices with no DMM. This makes CMA memory only being used when needed, instead for every buffer that has to be off-CPU rendered. Tested on Motorola Droid4 and Nokia N900 Signed-off-by:
-
Ivaylo Dimitrov authored
Move tiler related code to its own function. Signed-off-by:
-
- 25 Mar, 2022 3 commits
-
-
Cong Liu authored
qxl use ioremap to map ram_header and rom, in the arm64 implementation, the device is mapped as DEVICE_nGnRE, it can not support unaligned access. and qxl is a virtual device, it can be treated more like RAM than actual MMIO registers. use ioremap_wc() replace it. Signed-off-by:
Cong Liu <liucong2@kylinos.cn> Acked-by:
Christian König <christian.koenig@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220324104928.2959545-1-liucong2@kylinos.cnSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Rob Clark authored
With native userspace drivers in guest, a lot of GEM objects need to be neither shared nor mappable. And in fact making everything mappable and/or sharable results in unreasonably high fd usage in host VMM. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220219170301.545432-1-robdclark@gmail.comSigned-off-by:
-
Liu Zixian authored
drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218 Signed-off-by:
Liu Zixian <liuzixian4@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.comSigned-off-by:
-
- 24 Mar, 2022 15 commits
-
-
Maxime Ripard authored
In addition to the RGB444 output, the BCM2711 HDMI controller supports the YUV444 and YUV422 output formats. Let's add support for them in the driver, but still use RGB as the preferred format. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-8-maxime@cerno.tech
-
Maxime Ripard authored
Currently we take the max_bpc property as the bpc value and do not try anything else. However, what the other drivers seem to be doing is that they would try with the highest bpc allowed by the max_bpc property and the hardware capabilities, test if it results in an acceptable configuration, and if not decrease the bpc and try again. Let's use the same logic. Signed-off-by:
-
Maxime Ripard authored
The current code only base its decision for whether the scrambler must be enabled or not on the pixel clock of the mode, but doesn't take the bits per color into account. Let's leverage the new function to compute the clock rate in the scrambler setup code. Signed-off-by:
-
Maxime Ripard authored
In the function that validates that the clock isn't too high, we've only taken our controller limitations into account so far. However, the sink can have a limit on the maximum TMDS clock it can deal with too which is exposed through the EDID and the drm_display_info. Make sure we check it. Signed-off-by:
-
Maxime Ripard authored
The code to compute our clock rate for a given setup will be called in multiple places in the next patches, so let's create a separate function for it. Signed-off-by:
-
Maxime Ripard authored
Our code is doing the same clock rate validation in multiple instances. Let's create a helper to share the rate validation. Signed-off-by:
-
Maxime Ripard authored
The pixel_rate field in the vc4_hdmi_connector_state struct actually stores the TMDS character rate, let's rename it for consistency. Suggested-by:
-
YueHaibing authored
If DRM_ITE_IT6505 is y but DRM_DP_HELPER is m, building failed: drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_i2c_remove': ite-it6505.c:(.text+0x35c): undefined reference to `drm_dp_aux_unregister' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_read': ite-it6505.c:(.text+0x420): undefined reference to `drm_dp_dpcd_read' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_get_dpcd': ite-it6505.c:(.text+0x4a4): undefined reference to `drm_dp_dpcd_read' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_write': ite-it6505.c:(.text+0x52c): undefined reference to `drm_dp_dpcd_write' Select DRM_DP_HELPER for DRM_ITE_IT6505 to fix this. Fixes: b5c84a9e ("drm/bridge: add it6505 driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Christian König authored
Drivers should never touch this directly. v2: drop kerneldoc for now internal handling Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-2-christian.koenig@amd.com
-
Christian König authored
This function allows to replace fences from the shared fence list when we can gurantee that the operation represented by the original fence has finished or no accesses to the resources protected by the dma_resv object any more when the new fence finishes. Then use this function in the amdkfd code when BOs are unmapped from the process. v2: add an example when this is usefull. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Christian König authored
Use dma_resv_wait() instead of extracting the exclusive fence and waiting on it manually. Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Maor Gottlieb <maorg@nvidia.com> Cc: Gal Pressman <galpress@amazon.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-4-christian.koenig@amd.com
-
Christian König authored
We can get the excl fence together with the shared ones as well. v2: rename the member to fences as well Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-5-christian.koenig@amd.com
-
Nicolas Belin authored
Adding the audio support on the HDMI bridge for I2S only. Signed-off-by:
Nicolas Belin <nbelin@baylibre.com> Signed-off-by:
Andy.Hsieh <Andy.Hsieh@mediatek.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Nicolas Belin authored
Set the register page length or window length to 0x100 according to the documentation. Fixes: 988156dc ("drm: bridge: add it66121 driver") Signed-off-by:
-
Nicolas Belin authored
Update the ITE bridge HDMI it66121 bindings in order to support audio. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 23 Mar, 2022 7 commits
-
-
Patrik Jakobsson authored
These functions operate on a crtc and should be prefixed properly. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by:
-
Patrik Jakobsson authored
These functions are not used outside of their file scope so can be declared as static. Signed-off-by:
-
Patrik Jakobsson authored
The allocation is made for the gma_connector object so we must use the same address when free()ing the object. Signed-off-by:
-
Patrik Jakobsson authored
According to docs we should only register connectors that are hotpluggable. No connectors in gma500 are hotpluggable. Signed-off-by:
-
Patrik Jakobsson authored
This makes sure we're using proper locking when iterating the list of connectors. Signed-off-by:
-
Patrik Jakobsson authored
Reloading the driver revealed that the interrupt handler never got uninstalled. Signed-off-by:
-
Patrik Jakobsson authored
Signed-off-by:
-
- 21 Mar, 2022 6 commits
-
-
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomba@kernel.org> Signed-off-by: -
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: -
Zack Rusin authored
With very limited vram on svga3 it's difficult to handle all the surface migrations. Without gbobjects, i.e. the ability to store surfaces in guest mobs, there's no reason to support intermediate svga2 features, especially because we can fall back to fb traces and svga3 will never support those in-between features. On svga3 we wither want to use fb traces or screen targets (i.e. gbobjects), nothing in between. This fixes presentation on a lot of fusion/esxi tech previews where the exposed svga3 caps haven't been finalized yet. Signed-off-by:
Zack Rusin <zackr@vmware.com> Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3") Cc: <stable@vger.kernel.org> # v5.14+ Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
-
Zack Rusin authored
The kms code wasn't validating the modifiers and was letting through unsupported formats. rgb8 was never properly supported and has no matching svga screen target format so remove it. This fixes format/modifier failures in kms_addfb_basic from IGT. Signed-off-by:
-
Zack Rusin authored
Writes to SVGA_REG_CURSOR_MOBID did not wait for the buffers to be fully populated. This sometimes results in the device not being aware of the buffer when the cursor mob register was written. Properly wait for the buffer to be fully populated before setting it as a cursor mob. Signed-off-by:
-
Zack Rusin authored
vmw_move assumed that buffers to be moved would always be vmw_buffer_object's but after introduction of new placement for mob pages that's no longer the case. The resulting invalid read didn't have any practical consequences because the memory isn't used unless the object actually is a vmw_buffer_object. Fix it by moving the cast to the spot where the results are used. Signed-off-by:
Chuck Lever III <chuck.lever@oracle.com> Reviewed-by:
-
- 18 Mar, 2022 2 commits
-
-
Chuansheng Liu authored
Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwrite+0x57/0xc0 do_wp_page+0x278/0x2f0 __handle_mm_fault+0xdc2/0x1590 handle_mm_fault+0xdd/0x2c0 do_user_addr_fault+0x1d3/0x650 exc_page_fault+0x77/0x180 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fd98fc8fad1 == Figure out the race happens when one process is adding &page->lru into the pagelist tail in fb_deferred_io_mkwrite(), another process is re-initializing the same &page->lru in fb_deferred_io_fault(), which is not protected by the lock. This fix is to init all the page lists one time during initialization, it not only fixes the list corruption, but also avoids INIT_LIST_HEAD() redundantly. V2: change "int i" to "unsigned int i" (Geert Uytterhoeven) Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Fixes: 105a9404 ("fbdev/defio: Early-out if page is already enlisted") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Sankeerth Billakanti authored
Add panel identification entry for the sharp LQ140M1JW46 eDP panel with power sequencing delay information. Signed-off-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 17 Mar, 2022 2 commits
-
-
Christophe Branchereau authored
Add binding for the leadtek ltk035c5444t, which is a 640x480 mipi-dbi over spi / 24-bit RGB panel based on the newvision NV03052C chipset. It is found in the Anbernic RG350M mips handheld. Signed-off-by:
Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
-
Thomas Zimmermann authored
Commit 0d030118 ("fbdev: Improve performance of cfb_imageblit()") broke cfb_imageblit() for image widths that are not aligned to 8-bit boundaries. Fix this by handling the trailing pixels on each line separately. The performance improvements in the original commit do not regress by this change. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
-
