- 21 Aug, 2020 29 commits
-
-
Yang Shen authored
Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'. In order to keep this, explicitly pass the stop reason as an input parameter of 'hisi_qm_stop' function. Fixes: b67202e8("crypto: hisilicon/qm - add state machine for QM") Signed-off-by:
Shukun Tan <tanshukun1@huawei.com> Signed-off-by:
Yang Shen <shenyang39@huawei.com> Reviewed-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Shukun Tan authored
Increasing depth of 'event queue' from 1024 to 2048, which equals to twice depth of 'completion queue'. It will fix the easily happened 'event queue overflow' as using 1024 queue depth for 'event queue'. Fixes: 263c9959("crypto: hisilicon - add queue management driver...") Signed-off-by:
-
Hui Tang authored
The queue depth is 1024, so the condition for judging the queue full should be 1023, otherwise the hardware cannot judge whether the queue is empty or full. Fixes: 263c9959("crypto: hisilicon - add queue management driver...") Signed-off-by:
Hui Tang <tanghui20@huawei.com> Signed-off-by:
-
Yang Shen authored
Requests will be sent continuously as resetting, which will cause 'printk' flooding. Using 'dev_info_ratelimited' can solve this problem well. Fixes: b67202e8("crypto: hisilicon/qm - add state machine for QM") Signed-off-by:
-
Shukun Tan authored
The used reference count is used for counting the number of 'sqe' which is under processing. This reference count should be cleared as starting 'qp', otherwise the 'used' will be messy when allocating this 'qp' again. Fixes: 5308f660("crypto: hisilicon - QM memory management...") Signed-off-by:
-
Sihang Chen authored
Save the string address before pass to strsep, release it at end. Because strsep will update the string address to point after the token. Fixes: c31dc9fe("crypto: hisilicon/qm - add DebugFS for xQC and...") Signed-off-by:
Sihang Chen <chensihang1@hisilicon.com> Signed-off-by:
-
Ram Muthiah authored
Drivers shouldn't be enabled by default unless there is a very good reason to do so. There doesn't seem to be any such reason for the virtio crypto driver, so change it to the default of 'n'. Signed-off-by:
Ram Muthiah <rammuthiah@google.com> [EB: adjusted commit message] Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Madhuparna Bhowmik authored
engine->stat_irq_thresh was initialized after device_create_file() in the probe function, the initialization may race with call to spacc_stat_irq_thresh_store() which updates engine->stat_irq_thresh, therefore initialize it before creating the file in probe function. Found by Linux Driver Verification project (linuxtesting.org). Fixes: ce921368 ("crypto: picoxcell - add support for the...") Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Acked-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Ira Weiny authored
Revert "crypto: hash - Add real ahash walk interface" This reverts commit 75ecb231. The callers of the functions in this commit were removed in ab8085c1 Remove these unused calls. Fixes: ab8085c1 ("crypto: x86 - remove SHA multibuffer routines and mcryptd") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Ira Weiny authored
Once the crypto hash walk is started by crypto_hash_walk_first() returning non-zero, crypto_hash_walk_done() must be called to unmap any memory which was mapped by *_walk_first(). Ensure crypto_hash_walk_done() is called properly by: 1) Re-arranging the check for device data to be prior to calling *_walk_first() 2) on error call crypto_hash_walk_done() with an error code to allow the hash walk code to clean up. While we are at it clean up the 'out' label to be more meaningful. Signed-off-by:
-
Tom Rix authored
clang static analysis reports this problem intel-rng.c:333:2: warning: Assigned value is garbage or undefined void __iomem *mem = mem; ^~~~~~~~~~~~~~~~~ ~~~ Because mem is assigned before it is used, this is not a real problem. But the initialization is strange and not needed, so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Horia Geantă authored
Currently the debugfs fops are defined in caam/intern.h. This causes problems because it creates identical static functions and variables in multiple files. It also creates warnings when those files don't use the fops. This patch moves them into a standalone file, debugfs.c. It also removes unnecessary uses of ifdefs on CONFIG_DEBUG_FS. Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Jorge Ramirez-Ortiz authored
The current code waits for data to be available before attempting a second read. However the second read would not be executed as the while loop will exit. This fix does not wait if all data has been read (skips the call to msleep(0)) and reads a second time if partial data was retrieved on the first read. Worth noticing that since msleep(0) schedules a one jiffy timeout is better to skip such a call. Signed-off-by:
Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by:
Sumit Garg <sumit.garg@linaro.org> Signed-off-by:
-
Jorge Ramirez-Ortiz authored
Data rates of MAX_UINT32 will schedule an unnecessary one jiffy timeout on the call to msleep. Avoid this scenario by using 0 as the unlimited data rate. Signed-off-by:
-
Uros Bizjak authored
Current minimum required version of binutils is 2.23, which supports CRC32 instruction mnemonic. Replace the byte-wise specification of CRC32 with this proper mnemonic. The compiler is now able to pass memory operand to the instruction, so there is no need for a temporary register anymore. Some examples of the improvement: 12a: 48 8b 08 mov (%rax),%rcx 12d: f2 48 0f 38 f1 f1 crc32q %rcx,%rsi 133: 48 83 c0 08 add $0x8,%rax 137: 48 39 d0 cmp %rdx,%rax 13a: 75 ee jne 12a <crc32c_intel_update+0x1a> to: 125: f2 48 0f 38 f1 06 crc32q (%rsi),%rax 12b: 48 83 c6 08 add $0x8,%rsi 12f: 48 39 d6 cmp %rdx,%rsi 132: 75 f1 jne 125 <crc32c_intel_update+0x15> and: 146: 0f b6 08 movzbl (%rax),%ecx 149: f2 0f 38 f0 f1 crc32b %cl,%esi 14e: 48 83 c0 01 add $0x1,%rax 152: 48 39 d0 cmp %rdx,%rax 155: 75 ef jne 146 <crc32c_intel_update+0x36> to: 13b: f2 0f 38 f0 02 crc32b (%rdx),%eax 140: 48 83 c2 01 add $0x1,%rdx 144: 48 39 ca cmp %rcx,%rdx 147: 75 f2 jne 13b <crc32c_intel_update+0x2b> As the compiler has some more freedom w.r.t. register allocation, there is also a couple of reg-reg moves removed. There are no hidden states for CRC32 insn, so there is no need to mark assembly as volatile. v2: Introduce CRC32_INST define. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Remove the bitlocker cipher which is not supported by the kernel. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Remove the implementaion of automatic advancement of sector size in IV for storage ciphers as its use is not supproted by the kernel. Signed-off-by:
-
Herbert Xu authored
Currently if you speed test a hash that requires a key you'll get an error because tcrypt does not set a key by default. This patch allows a key to be set using the new module parameter klen. Signed-off-by: -
Christophe JAILLET authored
Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'. Fixes: 81bef015 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Tianjia Zhang authored
In case of memory allocation failure, a negative error code should be returned. Fixes: 785e5c61 ("crypto: mediatek - Add crypto driver support for some MediaTek chips") Cc: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Herbert Xu authored
This patch fixes most sparse warnings in the cesa driver. The only ones remaining are to do with copying data between iomem pointers and SG lists. Most changes are trivial. The following are the noteworthy ones: - Removal of swab in mv_cesa_aes_setkey. This appears to be bogus as everything gets swabbed again later on so for BE this ends up being different from LE. The change takes the LE behaviour as the correct one. - next_dma in mv_cesa_tdma_chain was not swabbed. Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Herbert Xu authored
The async path cannot use MAY_BACKLOG because it is not meant to block, which is what MAY_BACKLOG does. On the other hand, both the sync and async paths can make use of MAY_SLEEP. Fixes: 83094e5e ("crypto: af_alg - add async support to...") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Herbert Xu authored
I removed the MAY_BACKLOG flag on the aio path a while ago but the error check still incorrectly interpreted EBUSY as success. This may cause the submitter to wait for a request that will never complete. Fixes: dad41997 ("crypto: algif_skcipher - Do not set...") Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "failed" in pr_err() messages. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "a". Signed-off-by:
-
Randy Dunlap authored
Change the doubled word "at" to "at a". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "the". Change "at at" to "at a". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "is". Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'hifn_probe()' GFP_KERNEL can be used because it is a probe function and no spin_lock is taken. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
- 20 Aug, 2020 1 commit
-
-
Herbert Xu authored
The header file algapi.h includes skbuff.h unnecessarily since all we need is a forward declaration for struct sk_buff. This patch removes that inclusion. Unfortunately skbuff.h pulls in a lot of things and drivers over the years have come to rely on it so this patch adds a lot of missing inclusions that result from this. Signed-off-by:
-
- 19 Aug, 2020 1 commit
-
-
Herbert Xu authored
This patch moves crypto_yield into internal.h as it's only used by internal code such as skcipher. It also adds a missing inclusion of sched.h which is required for cond_resched. The header files in internal.h have been cleaned up to remove some ancient junk and add some more specific inclusions. Signed-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 3 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ...
-
