Pull ARM SoC fixes from Olof Johansson:
 "This is a slightly larger batch of fixes that we've been sitting on a
  few -rcs.  Most of them are simple oneliners, but there are two sets
  that are slightly larger and worth pointing out:

   - A set of patches to OMAP to deal with hwmod for RTC on am33xx
     (beaglebone SoC, among others).  It's the only clock that ever has
     a valid offset of 0, so a new flag needed introduction once this
     problem was discovered.

   - A collection of CCI fixes for performance counters discovered once
     people started using it on X-Gene CPUs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  arm-cci: pmu: Fix typo in event name
  Revert "ARM: tegra: fix erroneous address in dts"
  ARM: dts: imx6qdl: Fix SPDIF regression
  ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
  ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
  ARM: dts: kirkwood: Fix PCIe label on OpenRD
  ARM: kirkwood: ib62x0: fix size of u-boot environment partition
  bus: arm-ccn: make event groups reliable
  bus: arm-ccn: fix hrtimer registration
  bus: arm-ccn: fix PMU interrupt flags
  ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
  MAINTAINERS: add tree entry for ARM/UniPhier architecture
  ARM: sun5i: Fix typo in trip point temperature
  MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
  ARM: imx6ul: populates platform device at .init_machine
  bus: arm-ccn: Add missing event attribute exclusions for host/guest
  bus: arm-ccn: Correct required arguments for XP PMU events
  bus: arm-ccn: Fix XP watchpoint settings bitmask
  bus: arm-ccn: Do not attempt to configure XPs for cycle counter
  bus: arm-ccn: Fix PMU handling of MN
  ...

Pull thermal fix from Zhang Rui:
 "Only one patch this time, which fixes a crash in rcar_thermal driver.
  From Dirk Behme"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: rcar_thermal: Fix priv->zone error handling

Merge tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes

Allwinner fixes for 4.8

A single patch fixing a typo in the temperature trip points in the A13
DTSI.

* tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sun5i: Fix typo in trip point temperature
Signed-off-by: Olof Johansson <olof@lixom.net>

For one of the CCI events exposed under sysfs, "snoop" was typo'd as
"snopp". Correct this such that users see the expected event name when
enumerating events via sysfs.

Cc: arm@kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

i.MX fixes for 4.8, 2nd round:
 - Fix misspelled "ti,x-plate-ohms" property name of touchscreen
   controller for imx7d-sdb DTS.
 - Add missing BM_CLPCR_BYPASS_PMIC_READY setting for i.MX6SX to get
   suspend/resume work properly.
 - Fix SPDIF regression on imx6qdl which caused by a clock update on
   spdif device node.

* tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6qdl: Fix SPDIF regression
  ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
  ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
Signed-off-by: Olof Johansson <olof@lixom.net>

This reverts commit b5c86b74.

This is no longer needed due to other changes going into 4.8 to rename
the unit addresses on a large number of device nodes. So it was picked up
for v4.8-rc1 in error.
Reported-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull more hardened usercopyfixes from Kees Cook:

 - force check_object_size() to be inline too

 - move page-spanning check behind a CONFIG since it's triggering false
   positives

[ Changed the page-spanning config option to depend on EXPERT in the
  merge.  That way it still gets build testing, and you can enable it if
  you want to, but is never enabled for "normal" configurations ]

* tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  usercopy: remove page-spanning test for now
  usercopy: force check_object_size() inline

A custom allocator without __GFP_COMP that copies to userspace has been
found in vmw_execbuf_process[1], so this disables the page-span checker
by placing it behind a CONFIG for future work where such things can be
tracked down later.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326Reported-by: Vinson Lee <vlee@freedesktop.org>
Fixes: f5509cc1 ("mm: Hardened usercopy")
Signed-off-by: Kees Cook <keescook@chromium.org>

Just for good measure, make sure that check_object_size() is always
inlined too, as already done for copy_*_user() and __copy_*_user().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

Pull seccomp fixes from Kees Cook:
 "Fix UM seccomp vs ptrace, after reordering landed"

* tag 'seccomp-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Remove 2-phase API documentation
  um/ptrace: Fix the syscall number update after a ptrace
  um/ptrace: Fix the syscall_trace_leave call

Pull hardened usercopy fixes from Kees Cook:

 - inline copy_*_user() for correct use of __builtin_const_p() for
   hardened usercopy and the recent compile-time checks.

 - switch hardened usercopy to only check non-const size arguments to
   avoid meaningless checks on likely-sane const values.

 - update lkdtm usercopy tests to compenstate for the const checking.

* tag 'usercopy-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  lkdtm: adjust usercopy tests to bypass const checks
  usercopy: fold builtin_const check into inline function
  x86/uaccess: force copy_*_user() to be inlined

Fixes: 8112c4f1 ("seccomp: remove 2-phase API")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

Update the syscall number after each PTRACE_SETREGS on ORIG_*AX.

This is needed to get the potentially altered syscall number in the
seccomp filters after RET_TRACE.

This fix four seccomp_bpf tests:
> [ RUN      ] TRACE_syscall.skip_after_RET_TRACE
> seccomp_bpf.c:1560:TRACE_syscall.skip_after_RET_TRACE:Expected -1 (18446744073709551615) == syscall(39) (26)
> seccomp_bpf.c:1561:TRACE_syscall.skip_after_RET_TRACE:Expected 1 (1) == (*__errno_location ()) (22)
> [     FAIL ] TRACE_syscall.skip_after_RET_TRACE
> [ RUN      ] TRACE_syscall.kill_after_RET_TRACE
> TRACE_syscall.kill_after_RET_TRACE: Test exited normally instead of by signal (code: 1)
> [     FAIL ] TRACE_syscall.kill_after_RET_TRACE
> [ RUN      ] TRACE_syscall.skip_after_ptrace
> seccomp_bpf.c:1622:TRACE_syscall.skip_after_ptrace:Expected -1 (18446744073709551615) == syscall(39) (26)
> seccomp_bpf.c:1623:TRACE_syscall.skip_after_ptrace:Expected 1 (1) == (*__errno_location ()) (22)
> [     FAIL ] TRACE_syscall.skip_after_ptrace
> [ RUN      ] TRACE_syscall.kill_after_ptrace
> TRACE_syscall.kill_after_ptrace: Test exited normally instead of by signal (code: 1)
> [     FAIL ] TRACE_syscall.kill_after_ptrace

Fixes: 26703c63 ("um/ptrace: run seccomp after ptrace")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: James Morris <jmorris@namei.org>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

Keep the same semantic as before the commit 26703c63: deallocate
audit context and fake a proper syscall exit.

This fix a kernel panic triggered by the seccomp_bpf test:
> [ RUN      ] global.ERRNO_valid
> BUG: failure at kernel/auditsc.c:1504/__audit_syscall_entry()!
> Kernel panic - not syncing: BUG!

Fixes: 26703c63 ("um/ptrace: run seccomp after ptrace")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: James Morris <jmorris@namei.org>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

Pull rdma fixes from Doug Ledford:
 "This is the second pull request for the rdma subsystem.  Most of the
  patches are small and obvious.  I took two patches in that are larger
  than I wanted this late in the cycle.

  The first is the hfi1 patch that implements a work queue to test the
  QSFP read state.  I originally rejected the first patch for this
  (which would have place up to 20 seconds worth of udelays in their
  probe routine).  They then rewrote it the way I wanted (use delayed
  work tasks to wait asynchronously up to 20 seconds for the QSFP to
  come alive), so I can't really complain about the size of getting what
  I asked for :-/.

  The second is large because it switches the rcu locking in the debugfs
  code.  Since a locking change like this is done all at once, the size
  it what it is.  It resolves a litany of debug messages from the
  kernel, so I pulled it in for -rc.

  The rest are all typical -rc worthy patches I think.

  There will still be a third -rc pull request from the rdma subsystem
  this release.  I hope to have that one ready to go by the end of this
  week or early next.

  Summary:

   - a smattering of small fixes across the core, ipoib, i40iw, isert,
     cxgb4, and mlx4

   - a slightly larger group of fixes to each of mlx5 and hfi1"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/hfi1: Rework debugfs to use SRCU
  IB/hfi1: Make n_krcvqs be an unsigned long integer
  IB/hfi1: Add QSFP sanity pre-check
  IB/hfi1: Fix AHG KDETH Intr shift
  IB/hfi1: Fix SGE length for misaligned PIO copy
  IB/mlx5: Don't return errors from poll_cq
  IB/mlx5: Use TIR number based on selector
  IB/mlx5: Simplify code by removing return variable
  IB/mlx5: Return EINVAL when caller specifies too many SGEs
  IB/mlx4: Don't return errors from poll_cq
  Revert "IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one"
  IB/ipoib: Fix memory corruption in ipoib cm mode connect flow
  IB/core: Fix use after free in send_leave function
  IB/cxgb4: Make _free_qp static to silence build warning
  IB/isert: Properly release resources on DEVICE_REMOVAL
  IB/hfi1: Fix the size parameter to find_first_bit
  IB/mlx5: Fix the size parameter to find_first_bit
  IB/hfi1: Clean up type used and casting
  i40iw: Receive notification events correctly
  i40iw: Update hw_iwarp_state

The hardened usercopy is now consistently avoiding checks against const
sizes, since we really only want to perform runtime bounds checking
on lengths that weren't known at build time. To test the hardened usercopy
code, we must force the length arguments to be seen as non-const.
Signed-off-by: Kees Cook <keescook@chromium.org>

Instead of having each caller of check_object_size() need to remember to
check for a const size parameter, move the check into check_object_size()
itself. This actually matches the original implementation in PaX, though
this commit cleans up the now-redundant builtin_const() calls in the
various architectures.
Signed-off-by: Kees Cook <keescook@chromium.org>

As already done with __copy_*_user(), mark copy_*_user() as __always_inline.
Without this, the checks for things like __builtin_const_p() won't work
consistently in either hardened usercopy nor the recent adjustments for
detecting usercopy overflows at compile time.

The change in kernel text size is detectable, but very small:

 text      data     bss     dec      hex     filename
12118735  5768608 14229504 32116847 1ea106f vmlinux.before
12120207  5768608 14229504 32118319 1ea162f vmlinux.after
Signed-off-by: Kees Cook <keescook@chromium.org>

Pull mailbox fixes from Jassi Brar:
 "Misc fixes for BCM mailbox driver

   - Fix build warnings by making static functions used within the file.
   - Check for potential NULL before dereferencing
   - Fix link error by defining HAS_DMA dependency"

* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  fix:mailbox:bcm-pdc-mailbox:mark symbols static where possible
  mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown()
  mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX

Pull SCSI fixes from James Bottomley:
 "This is really three fixes, but the SES one comes in a bundle of three
  (making the replacement API available properly, using it and removing
  the non-working one).  The SES problem causes an oops on hpsa devices
  because they attach virtual disks to the host which aren't SAS
  attached (the replacement API ignores them).

  The other two fixes are fairly minor: the sense key one means we
  actually resolve a newly added sense key and the RDAC device
  blacklisting is needed to prevent us annoying the universal XPORT lun
  of various RDAC arrays"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sas: remove is_sas_attached()
  scsi: ses: use scsi_is_sas_rphy instead of is_sas_attached
  scsi: sas: provide stub implementation for scsi_is_sas_rphy
  scsi: blacklist all RDAC devices for BLIST_NO_ULD_ATTACH
  scsi: fix upper bounds check of sense key in scsi_sense_key_string()

Pull regmap fixes from Mark Brown:
 "Several fixes here, the main one being the change from Lars-Peter
  which I'd been letting soak in -next since the merge window in case it
  uncovered further issues as it's a minimal fix rather than a change
  addressing the root cause of the problems (which would've been too
  invasive for -rc):

   - The biggest change is a fix from Lars-Peter to ensure that we don't
     create overlapping rbtree nodes which in turn avoids returning
     corrupt cache values to users, fixing some issues that were exposed
     by some recent optimisations with certain access patterns but had
     been present for a long time.

   - A fix from Elaine Zhang to stop us updating the cache if we get an
     I/O error when writing to the hardware.

   - A fix fromm Maarten ter Huurne to avoid uninitialized defaults in
     cases where we have non-readable registers but are initializing the
     cache by reading from the device"

* tag 'regmap-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: drop cache if the bus transfer error
  regmap: rbtree: Avoid overlapping nodes
  regmap: cache: Fix num_reg_defaults computation from reg_defaults_raw

Pull spi fixes from Mark Brown:
 "As well as the usual driver fixes there's a couple of non-trivial core
  fixes in here:

   - Fixes for issues reported by Julia Lawall in the changes that were
     sent last time to fix interaction between the bus lock and the
     locking done for the SPI thread.  I'd let this one cook for a while
     to make sure nothing else came up in testing.

   - A fix from Sien Wu for arithmetic overflows when calculating the
     timeout for larger transfers (espcially common with slow buses with
     flashes on them)"

* tag 'spi-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Prevent unexpected SPI time out due to arithmetic overflow
  spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devices
  MAINTAINERS: add myself as Samsung SPI maintainer
  spi: Drop io_mutex in error paths
  spi: sh-msiof: Avoid invalid clock generator parameters
  spi: img-spfi: Remove spi_master_put in img_spfi_remove()
  spi: mediatek: remove spi_master_put in mtk_spi_remove()
  spi: qup: Remove spi_master_put in spi_qup_remove()

Merge tag 'regulator-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two things here, one an e-mail update for Krzysztof Kozlowski and the
  other a couple of fixes for issues with incorrectly described voltages
  in a couple of the Qualcomm regulator drivers that were breaking MMC
  on some platforms"

* tag 'regulator-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Change Krzysztof Kozlowski's email to kernel.org
  regulator: qcom_smd: Fix voltage ranges for pma8084 ftsmps and pldo
  regulator: qcom_smd: Fix voltage ranges for pm8x41

Pull pin control fixes from Linus Walleij:
 "Nothing special at all, just three SoC-specific driver fixes:

   - Fix routing problems in pistachio (Imagination) and sunxi
     (AllWinner)

   - Fix an interrupt problem in the Cherryview (Intel)"

* tag 'pinctrl-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33
  pinctrl: cherryview: Do not mask all interrupts in probe
  pinctrl: pistachio: fix mfio pll_lock pinmux

In case thermal_zone_xxx_register() returns an error, priv->zone
isn't NULL any more, but contains the error code.

This is passed to thermal_zone_device_unregister(), then. This checks
for priv->zone being NULL, but the error code is != NULL. So it works
with the error code as a pointer. Crashing immediately.

To fix this, reset priv->zone to NULL before entering
rcar_gen3_thermal_remove().
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', 'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus

Merge remote-tracking branches 'regulator/fix/email' and 'regulator/fix/qcom-smd' into regulator-linus

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in the cryptd code that breaks certain
  accelerated AED algorithms as well as an older regression in the
  caam driver that breaks IPsec"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix IV loading for authenc (giv)decryption
  crypto: cryptd - Use correct tfm object for AEAD tracking

Pull kbuild fix from Michal Marek:
 "Fix for 'make deb-pkg'.  The bug got introduced in v4.8-rc1"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  builddeb: Skip gcc-plugins when not configured

Commit 833f2cbf ("ARM: dts: imx6: change the core clock of spdif")
changed many more clocks than only the SPDIF core clock as stated in
the commit message.

The MLB clock has been added and this causes SPDIF regression as
reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240

The MX6Q Reference Manual does not mention that MLB is a clock related
to SPDIF, so change it back to a dummy clock to restore SPDIF
functionality.

Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131

Fixes: 833f2cbf ("ARM: dts: imx6: change the core clock of spdif")
Cc: <stable@vger.kernel.org> # 4.4.x
Reported-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull x86 fix from Thomas Gleixner:
 "A single fix for an AMD erratum so machines without a BIOS fix work"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/AMD: Apply erratum 665 on machines without a BIOS fix

Pull timer fixes from Thomas Gleixner:
 "Two fixlet from the timers departement:

   - A fix for scheduler stalls in the tick idle code affecting
     NOHZ_FULL kernels

   - A trivial compile fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/nohz: Fix softlockup on scheduler stalls in kvm guest
  clocksource/drivers/atmel-pit: Fix compilation error

Pull device mapper fixes from Mike Snitzer:

 - a stable fix in both DM crypt and DM log-writes for too large bios
   (as generated by bcache)

 - two other stable fixes for DM log-writes

 - a stable fix for a DM crypt bug that could result in freeing pointers
   from uninitialized memory in the tfm allocation error path

 - a DM bufio cleanup to discontinue using create_singlethread_workqueue()

* tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm bufio: remove use of deprecated create_singlethread_workqueue()
  dm crypt: fix free of bad values after tfm allocation failure
  dm crypt: fix error with too large bios
  dm log writes: fix check of kthread_run() return value
  dm log writes: fix bug with too large bios
  dm log writes: move IO accounting earlier to fix error path

Pull btrfs fixes from Chris Mason:
 "I'm still prepping a set of fixes for btrfs fsync, just nailing down a
  hard to trigger memory corruption.  For now, these are tested and ready."

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix one bug that process may endlessly wait for ticket in wait_reserve_ticket()
  Btrfs: fix endless loop in balancing block groups
  Btrfs: kill invalid ASSERT() in process_all_refs()

Pull arm64 fixes from Catalin Marinas:
 "arm64 and arm/perf fixes:

   - arm64 fix: debug exception unmasking on the CPU resume path

   - ARM PMU fixes: memory leak on error path and NULL pointer
     dereference"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1
  drivers/perf: arm_pmu: Fix NULL pointer dereference during probe
  drivers/perf: arm_pmu: Fix leak in error path

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small driver fixes for 4.8-rc5.

  The largest thing here is deleting an obsolete driver,
  drivers/misc/bh1780gli.c, as the functionality of it was replaced by
  an iio driver a while ago.

  The other fixes are things that have been reported, or reverts of
  broken stuff (the binder change).  All of these changes have been in
  linux-next for a while with no reported issues"

* tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Don't declare Falcon Ridge unsupported
  thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.
  thunderbolt: Fix resume quirk for Falcon Ridge 4C.
  lkdtm: Mark lkdtm_rodata_do_nothing() notrace
  mei: me: disable driver on SPT SPS firmware
  Revert "android: binder: fix dangling pointer comparison"
  drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup
  android: binder: fix dangling pointer comparison
  misc: delete bh1780 driver

Pull driver core fixes from Greg KH:
 "Here are three small fixes for 4.8-rc5.

  One for sysfs, one for kernfs, and one documentation fix, all for
  reported issues.  All of these have been in linux-next for a while"

* tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: correctly handle read offset on PREALLOC attrs
  documentation: drivers/core/of: fix name of of_node symlink
  kernfs: don't depend on d_find_any_alias() when generating notifications

Pull staging/IIO driver fixes from Greg KH:
 "Here are a number of small fixes for staging and IIO drivers that
  resolve reported problems.

  Full details are in the shortlog.  All of these have been in
  linux-next with no reported issues"

* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
  arm: dts: rockchip: add reset node for the exist saradc SoCs
  arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
  iio: adc: rockchip_saradc: reset saradc controller before programming it
  iio: accel: kxsd9: Fix raw read return
  iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
  iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
  include/linux: fix excess fence.h kernel-doc notation
  staging: wilc1000: correctly check if associatedsta has not been found
  staging: wilc1000: NULL dereference on error
  staging: wilc1000: txq_event: Fix coding error
  MAINTAINERS: Add file patterns for ion device tree bindings
  MAINTAINERS: Update maintainer entry for wilc1000
  iio: chemical: atlas-ph-sensor: fix typo in val assignment
  iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
  staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
  staging: comedi: dt2811: fix a precedence bug
  staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
  staging: comedi: ni_mio_common: fix wrong insn_write handler
  staging: comedi: comedi_test: fix timer race conditions
  staging: comedi: daqboard2000: bug fix board type matching code
  ...

Pull serial driver fixes from Greg KH:
 "Here are some small serial driver fixes for 4.8-rc5.  One fixes an
  oft-reported build issue with the fintek driver, another reverts a
  patch that was causing problems, one fixes a crash, and some new
  device ids were added.

  All of these have been in linux-next for a while"

* tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250: added acces i/o products quad and octal serial cards
  serial: 8250_mid: fix divide error bug if baud rate is 0
  Revert "tty/serial/8250: use mctrl_gpio helpers"
  8250/fintek: rename IRQ_MODE macro