Pull driver core updates from Greg KH:
 "Here is the big set of driver core and debug printk changes for
  6.1-rc1. Included in here is:

   - dynamic debug updates for the core and the drm subsystem. The drm
     changes have all been acked by the relevant maintainers

   - kernfs fixes for syzbot reported problems

   - kernfs refactors and updates for cgroup requirements

   - magic number cleanups and removals from the kernel tree (they were
     not being used and they really did not actually do anything)

   - other tiny cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
  docs: filesystems: sysfs: Make text and code for ->show() consistent
  Documentation: NBD_REQUEST_MAGIC isn't a magic number
  a.out: restore CMAGIC
  device property: Add const qualifier to device_get_match_data() parameter
  drm_print: add _ddebug descriptor to drm_*dbg prototypes
  drm_print: prefer bare printk KERN_DEBUG on generic fn
  drm_print: optimize drm_debug_enabled for jump-label
  drm-print: add drm_dbg_driver to improve namespace symmetry
  drm-print.h: include dyndbg header
  drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
  drm_print: interpose drm_*dbg with forwarding macros
  drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
  drm_print: condense enum drm_debug_category
  debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
  driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
  Documentation: ENI155_MAGIC isn't a magic number
  Documentation: NBD_REPLY_MAGIC isn't a magic number
  nbd: remove define-only NBD_MAGIC, previously magic number
  Documentation: FW_HEADER_MAGIC isn't a magic number
  Documentation: EEPROM_MAGIC_VALUE isn't a magic number
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.

  Nothing major in here, lots of little things with new devices
  supported and updates for a few drivers. Highlights include:

   - thunderbolt/USB4 devices supported a bit better than before, and
     some new ids to enable new hardware devices

   - USB gadget uvc updates for newer video formats and better v4l
     integration (the v4l portions were acked by those maintainers)

   - typec updates for tiny issues and more typec drivers for new chips.

   - xhci tiny updates for minor issues

   - big usb-serial ftdi_sio driver update to handle new devices better

   - lots of tiny dwc3 fixes and updates for the IP block that is
     showing up everywhere these days

   - dts updates for new devices being supported

   - other tiny janitorial and cleanups fixes for lots of different USB
     drivers. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: gadget: uvc: don't put item still in use
  usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
  usb: host: ehci-exynos: switch to using gpiod API
  Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
  dt-bindings: usb: Convert FOTG210 to dt schema
  usb: mtu3: fix failed runtime suspend in host only mode
  USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
  usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
  usb: typec: Replace custom implementation of device_match_fwnode()
  usb: typec: ucsi: Don't warn on probe deferral
  usb: add quirks for Lenovo OneLink+ Dock
  MAINTAINERS: switch dwc3 to Thinh
  usb: idmouse: fix an uninit-value in idmouse_open
  USB: PHY: JZ4770: Switch to use dev_err_probe() helper
  usb: phy: generic: Switch to use dev_err_probe() helper
  usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
  usb: cdns3: remove dead code
  usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
  usb: musb: sunxi: Switch to use dev_err_probe() helper
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.1-rc1.

  Lots of cleanups in here, no real new functionality this time around,
  with the diffstat being that we removed more lines than we added!

  Included in here are:

   - termios unification cleanups from Al Viro, it's nice to finally get
     this work done

   - tty serial transmit cleanups in various drivers in preparation for
     more cleanup and unification in future releases (that work was not
     ready for this release)

   - n_gsm fixes and updates

   - ktermios cleanups and code reductions

   - dt bindings json conversions and updates for new devices

   - some serial driver updates for new devices

   - lots of other tiny cleanups and janitorial stuff. Full details in
     the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
  serial: cpm_uart: Don't request IRQ too early for console port
  tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
  tty: serial: unify TX space reads under altera_jtaguart_tx_space()
  tty: serial: use FIELD_GET() in lqasc_tx_ready()
  tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
  tty: serial: allow pxa.c to be COMPILE_TESTed
  serial: stm32: Fix unused-variable warning
  tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
  serial: 8250: Fix restoring termios speed after suspend
  serial: Deassert Transmit Enable on probe in driver-specific way
  serial: 8250_dma: Convert to use uart_xmit_advance()
  serial: 8250_omap: Convert to use uart_xmit_advance()
  MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
  serial: stm32: Deassert Transmit Enable on ->rs485_config()
  serial: ar933x: Deassert Transmit Enable on ->rs485_config()
  tty: serial: atmel: Use FIELD_PREP/FIELD_GET
  tty: serial: atmel: Make the driver aware of the existence of GCLK
  tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  tty: serial: atmel: Separate mode clearing between UART and USART
  dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  ...

Pull soundwire updates from Vinod Koul:
 "Updates for Intel, Cadence and Qualcomm drivers:

   - another round of Intel driver cleanup to prepare for future code
     reorg which is expected in next cycle (Pierre-Louis Bossart)

   - bus unattach notifications processing during re-enumeration along
     with Cadence driver updates for this (Richard Fitzgerald)

   - Qualcomm driver updates to handle device0 status (Srinivas
     Kandagatla)"

* tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (42 commits)
  soundwire: intel: add helper to stop bus
  soundwire: intel: introduce helpers to start bus
  soundwire: intel: introduce intel_shim_check_wake() helper
  soundwire: intel: simplify read ops assignment
  soundwire: intel: remove intel_init() wrapper
  soundwire: intel: move shim initialization before power up/down
  soundwire: intel: remove clock_stop parameter in intel_shim_init()
  soundwire: intel: move all PDI initialization under intel_register_dai()
  soundwire: intel: move DAI registration and debugfs init earlier
  soundwire: intel: simplify flow and use devm_ for DAI registration
  soundwire: intel: fix error handling on dai registration issues
  soundwire: cadence: Simplify error paths in cdns_xfer_msg()
  soundwire: cadence: Fix error check in cdns_xfer_msg()
  soundwire: cadence: Write to correct address for each FIFO chunk
  soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
  soundwire: qcom: do not send status of device 0 during alert
  soundwire: qcom: update status from device id 1
  soundwire: cadence: Don't overwrite msg->buf during write commands
  soundwire: bus: Don't exit early if no device IDs were programmed
  soundwire: cadence: Fix lost ATTACHED interrupts when enumerating
  ...

Pull phy updates from Vinod Koul:
 "This contains bunch of new device support and one new Sunplus driver
  along with updates which include another big round of qmp phy
  conversion.

  New support:
   - Qualcomm SC8280XP eDP & DP and USB3 UNI phy (Bjorn Andersson)
   - Rockchip rk3568 inno dsidphy (Chris Morgan)
   - ocelot-serdes phy yaml binding (Colin Foster)
   - Renesas gen2-usb phy yaml binding (Geert Uytterhoeven)
   - RGMII suport in lan966x driver (Horatiu Vultur)
   - Qualcomm SM6375 usb snps-femto-v2 bindings (Konrad Dybcio)
   - Rockchip rk356x csi-dphya (Michael Riesch)
   - Qualcomm sdm670 usb2 bindings (Richard Acayan)
   - Sunplus USB2 PHY (Vincent Shih)

  Updates:
   - Mediatek hdmi, ufs, tphy and xsphy updates to use bitfield helpers
     (Chunfeng Yun)
   - Continued Qualcomm qmp phy driver split and cleanup. More patches
     are under review and expected that next cycle might see completion
     of this activity (Dmitry Baryshkov & Johan Hovold)
   - TI wiz driver support for j7200 10g (Roger Quadros)
   - Qualcomm femto phy driver support for override params to help with
     tuning (Sandeep Maheswaram)
   - SGMII support in TI wiz driver (Siddharth Vadapalli)
   - dev_err_probe simplification (Yuan Can)"

* tag 'phy-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (170 commits)
  phy: phy-mtk-dp: make array driving_params static const
  dt-bindings: phy: qcom,qusb2: document sdm670 compatible
  phy: qcom-qmp-pcie: fix resource mapping for SDM845 QHP PHY
  phy: rockchip-snps-pcie3: only look for rockchip,pipe-grf on rk3588
  phy: tegra: xusb: Enable usb role switch attribute
  phy: mediatek: fix build warning of FIELD_PREP()
  phy: qcom-qmp-usb: Use dev_err_probe() to simplify code
  phy: qcom-qmp-ufs: Use dev_err_probe() to simplify code
  phy: qcom-qmp-pcie-msm8996: Use dev_err_probe() to simplify code
  phy: qcom-qmp-combo: Use dev_err_probe() to simplify code
  phy: qualcomm: call clk_disable_unprepare in the error handling
  phy: intel: Use dev_err_probe() to simplify code
  phy: tegra: xusb: Use dev_err_probe() to simplify code
  phy: qcom-snps: Use dev_err_probe() to simplify code
  phy: qcom-qusb2: Use dev_err_probe() to simplify code
  phy: qcom-qmp-pcie: Use dev_err_probe() to simplify code
  phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe()
  phy: mediatek: mipi: remove register access helpers
  phy: mediatek: mipi: mt8183: use common helper to access registers
  phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask
  ...

Pull dmaengine updates from Vinod Koul:
 "New Support:

   - MT6795 SoC dma controller (AngeloGioacchino Del Regno)

   - qcom-adm controller yaml binding (Christian Marangi)

   - Renesas r8a779g0 dma controller yaml binding (Geert Uytterhoeven)

   - Qualcomm SM6350 GPI dma controller (Luca Weiss)

  Updates:

   - STM32 DMA-MDMA chaining support (Amelie Delaunay)

   - make hsu driver use managed resources (Andy Shevchenko)

   - the usual round of idxd driver updates (Dave Jiang & Jerry
     Snitselaar)

   - apple dma driver iommu and pd properties and remove use
     of devres for irqs (Janne Grunau & Martin Povišer)

   - device_synchronize support for Xilinx zynqmp driver (Swati
     Agarwal)"

* tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
  dmaengine: ioat: remove unused declarations in dma.h
  dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requested
  dmaengine: zynqmp_dma: Add device_synchronize support
  dt-bindings: dma: add additional pbus reset to qcom,adm
  dt-bindings: dma: rework qcom,adm Documentation to yaml schema
  dt-bindings: dma: apple,admac: Add iommus and power-domains properties
  dmaengine: dw-edma: Remove runtime PM support
  dmaengine: idxd: add configuration for concurrent batch descriptor processing
  dmaengine: idxd: add configuration for concurrent work descriptor processing
  dmaengine: idxd: add WQ operation cap restriction support
  dmanegine: idxd: reformat opcap output to match bitmap_parse() input
  dmaengine: idxd: convert ats_dis to a wq flag
  dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
  dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg
  dmaengine: qcom-adm: fix wrong sizeof config in slave_config
  dmaengine: ti: k3-psil: add additional TX threads for j721e
  dmaengine: ti: k3-psil: add additional TX threads for j7200
  dmaengine: apple-admac: Trigger shared reset
  dmaengine: apple-admac: Do not use devres for IRQs
  dmaengine: ti: edma: Remove some unused functions
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
  mpt3sas, target). The biggest change (from my biased viewpoint) being
  that the mpi3mr now attached to the SAS transport class, making it the
  first fusion type device to do so.

  Beyond the usual bug fixing and security class reworks, there aren't a
  huge number of core changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
  scsi: mpi3mr: Remove unnecessary cast
  scsi: stex: Properly zero out the passthrough command structure
  scsi: mpi3mr: Update driver version to 8.2.0.3.0
  scsi: mpi3mr: Fix scheduling while atomic type bug
  scsi: mpi3mr: Scan the devices during resume time
  scsi: mpi3mr: Free enclosure objects during driver unload
  scsi: mpi3mr: Handle 0xF003 Fault Code
  scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
  scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
  scsi: mpi3mr: Support new power management framework
  scsi: mpi3mr: Update mpi3 header files
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
  scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
  scsi: core: Add I/O timeout count for SCSI device
  scsi: qedf: Populate sysfs attributes for vport
  scsi: pm8001: Replace one-element array with flexible-array member
  scsi: 3w-xxxx: Replace one-element array with flexible-array member
  scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
  ...

Pull rdma updates from Jason Gunthorpe:
 "Not a big list of changes this cycle, mostly small things. The new
  MANA rdma driver should come next cycle along with a bunch of work on
  rxe.

  Summary:

   - Small bug fixes in mlx5, efa, rxe, hns, irdma, erdma, siw

   - rts tracing improvements

   - Code improvements: strlscpy conversion, unused parameter, spelling
     mistakes, unused variables, flex arrays

   - restrack device details report for hns

   - Simplify struct device initialization in SRP

   - Eliminate the never-used service_mask support in IB CM

   - Make rxe not print to the console for some kinds of network packets

   - Asymetric paths and router support in the CM through netlink
     messages

   - DMABUF importer support for mlx5devx umem's"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (84 commits)
  RDMA/rxe: Remove error/warning messages from packet receiver path
  RDMA/usnic: fix set-but-not-unused variable 'flags' warning
  IB/hfi1: Use skb_put_data() instead of skb_put/memcpy pair
  RDMA/hns: Unified Log Printing Style
  RDMA/hns: Replacing magic number with macros in apply_func_caps()
  RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
  RDMA/hns: Remove redundant 'max_srq_desc_sz' in caps
  RDMA/hns: Remove redundant 'num_mtt_segs' and 'max_extend_sg'
  RDMA/hns: Remove redundant 'phy_addr' in hns_roce_hem_list_find_mtt()
  RDMA/hns: Remove redundant 'use_lowmem' argument from hns_roce_init_hem_table()
  RDMA/hns: Remove redundant 'bt_level' for hem_list_alloc_item()
  RDMA/hns: Remove redundant 'attr_mask' in modify_qp_init_to_init()
  RDMA/hns: Remove unnecessary brackets when getting point
  RDMA/hns: Remove unnecessary braces for single statement blocks
  RDMA/hns: Cleanup for a spelling error of Asynchronous
  IB/rdmavt: Add __init/__exit annotations to module init/exit funcs
  RDMA/rxe: Remove redundant num_sge fields
  RDMA/mlx5: Enable ATS support for MRs and umems
  RDMA/mlx5: Add support for dmabuf to devx umem
  RDMA/core: Add UVERBS_ATTR_RAW_FD
  ...

Pull MTD updates from Miquel Raynal:
 "Core MTD changes:
   - mtdchar: add MEMREAD ioctl
   - Add ECC error accounting for each read request
   - always initialize 'stats' in struct mtd_oob_ops
   - Track maximum number of bitflips for each read request
   - Fix repeated word in comment
   - Move from strlcpy with unused retval to strscpy
   - Fix a typo in a comment
   - Add binding for U-Boot bootloader partitions

  MTD device drivers changes:
   - FTL: use container_of() rather than cast
   - docg3:
      - Use correct function names in comment blocks
      - Check the return value of devm_ioremap() in the probe
   - physmap-core: Fix NULL pointer dereferencing in
     of_select_probe_type()
   - parsers: add Broadcom's U-Boot parser

  Raw NAND core changes:
   - Replace of_gpio_named_count() by gpiod_count()
   - Remove misguided comment of nand_get_device()
   - bbt: Use the bitmap API to allocate bitmaps

  Raw NAND controller drivers changes:
   - Meson:
      - Stop supporting legacy clocks
      - Refine resource getting in probe
      - Convert bindings to yaml
      - Fix clock handling and update the bindings accordingly
      - Fix bit map use in meson_nfc_ecc_correct()
   - bcm47xx:
      - Fix spelling typo in comment
   - STM32 FMC2:
      - Switch to using devm_fwnode_gpiod_get()
      - Fix dma_map_sg error check
   - Cadence:
      - Remove an unneeded result variable
   - Marvell:
      - Fix error handle regarding dma_map_sg
   - Orion:
      - Use devm_clk_get_optional()
   - Cafe:
      - Use correct function name in comment block
   - Atmel:
      - Unmap streaming DMA mappings
   - Arasan:
      - Stop using 0 as NULL pointer
   - GPMI:
      - Fix typo 'the the' in comment
   - BRCM:
      - Add individual glue driver selection
      - Move Kconfig to driver folder
   - FSL: Fix none ECC mode
   - Intel:
      - Use devm_platform_ioremap_resource_byname()
      - Remove unused clk_rate member from struct ebu_nand
      - Remove unused nand_pa member from ebu_nand_cs
      - Don't re-define NAND_DATA_IFACE_CHECK_ONLY
      - Remove undocumented compatible string
      - Fix compatible string in the bindings
      - Read the chip-select line from the correct OF node
      - Fix maximum chip select value in the bindings"

* tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits)
  mtd: rawnand: meson: stop supporting legacy clocks
  dt-bindings: nand: meson: convert txt to yaml
  mtd: rawnand: meson: refine resource getting in probe
  mtd: rawnand: meson: fix the clock
  dt-bindings: nand: meson: fix meson nfc clock
  mtd: rawnand: bcm47xx: fix spelling typo in comment
  mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()
  mtd: rawnand: cadence: Remove an unneeded result variable
  mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()
  mtd: rawnand: marvell: Fix error handle regarding dma_map_sg
  mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check
  mtd: rawnand: remove misguided comment of nand_get_device()
  mtd: rawnand: orion: Use devm_clk_get_optional()
  mtd: rawnand: cafe: Use correct function name in comment block
  mtd: rawnand: atmel: Unmap streaming DMA mappings
  mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
  mtd: rawnand: arasan: stop using 0 as NULL pointer
  mtd: rawnand: gpmi: Fix typo 'the the' in comment
  mtd: rawnand: brcmnand: Add individual glue driver selection
  mtd: rawnand: brcmnand: Move Kconfig to driver folder
  ...

Pull remoteproc updates from Bjorn Andersson:
 "Support for remoteprocs that will perform recovery without help from
  Linux is introduced.

  The virtio integration is transitioned towards remoteproc_virtio.c and
  represented by a platform_device, in preparation for instantiating
  virtio instances from DeviceTree.

  The iMX remoteproc driver has a couple of sparse warnings corrected
  and a couple of error message printouts are cleaned up. The keystone
  driver is transitioned to use the gpiod API"

* tag 'rproc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  remoteproc: virtio: Fix warning on bindings by removing the of_match_table
  remoteproc: Support attach recovery after rproc crash
  remoteproc: Introduce rproc features
  remoteproc: virtio: Create platform device for the remoteproc_virtio
  remoteproc: Move rproc_vdev management to remoteproc_virtio.c
  remoteproc: core: Introduce rproc_add_rvdev function
  remoteproc: core: Introduce rproc_rvdev_add_device function
  remoteproc: Harden rproc_handle_vdev() against integer overflow
  remoteproc/keystone: Switch to using gpiod API
  drivers/remoteproc: Fix repeated words in comments
  remoteproc: imx_dsp_rproc: fix argument 2 of rproc_mem_entry_init
  remoteproc: imx_rproc: Simplify some error message

Pull rpmsg updates from Bjorn Andersson:
 "This fixes a double free/destroy and drops an unnecessary local
  variable in the rpmsg char driver"

* tag 'rpmsg-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: char: Avoid double destroy of default endpoint
  rpmsg: char: Remove the unneeded result variable

Pull power supply and reset updates from Sebastian Reichel:

 - new maintenance charging documentation

 - mt6370: new charger driver

 - bq25890: support input current limit

 - added Qualcomm PMK8350 PON support

 - misc minor fixes

* tag 'for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (22 commits)
  power: supply: ab8500: remove unused static local variable
  power: supply: mt6370: Fix return value check in mt6370_chg_probe()
  power: supply: ab8500: Remove unused struct ab8500_chargalg_sysfs_entry
  power: supply: mt6370: uses IIO interfaces, depends on IIO
  power: supply: max1721x: Fix spelling mistake "Gauage" -> "Gauge"
  power: supply: mt6370: Add MediaTek MT6370 charger driver
  dt-bindings: power: supply: Add MediaTek MT6370 Charger
  lib: add linear range index macro
  power: supply: bq25890: Fix enum conversion in bq25890_power_supply_set_property()
  power: supply: bq27xxx: fix NULL vs 0 warnings
  power: supply: bq27xxx: fix __be16 warnings
  power: supply: bq25890: Add support for setting IINLIM
  power: supply: bq25890: Disable PUMPX_EN on errors
  power: supply: Fix repeated word in comments
  power: supply: adp5061: show unknown capacity_level as text
  power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
  power: supply: tps65217: Fix comments typo
  power: reset: qcom-pon: add support for qcom,pmk8350-pon compatible string
  dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"
  power: supply: cw2015: Use device managed API to simplify the code
  ...

Pull HSI updates from Sebastian Reichel:

 - completely switch to gpiod API

 - misc small fixes

* tag 'hsi-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: nokia-modem: Replace of_gpio_count() by gpiod_count()
  HSI: ssi_protocol: fix potential resource leak in ssip_pn_open()
  HSI: omap_ssi_port: Fix dma_map_sg error check
  HSI: cmt_speech: Pass a pointer to virt_to_page()
  HSI: omap_ssi: Fix refcount leak in ssi_probe
  HSI: clients: remove duplicate assignment

Merge tag 'pwm/for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The Rockchip and Mediatek drivers gain support for more chips and the
  LPSS driver undergoes some refactoring and receives some improvements.

  Other than that there are various cleanups of the core"

* tag 'pwm/for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: sysfs: Replace sprintf() with sysfs_emit()
  pwm: core: Replace custom implementation of device_match_fwnode()
  pwm: lpss: Add a comment to the bypass field
  pwm: lpss: Make use of bits.h macros for all masks
  pwm: lpss: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  pwm: lpss: Use device_get_match_data() to get device data
  pwm: lpss: Move resource mapping to the glue drivers
  pwm: lpss: Move exported symbols to PWM_LPSS namespace
  pwm: lpss: Deduplicate board info data structures
  dt-bindings: pwm: Add compatible for Mediatek MT8188
  dt-bindings: pwm: rockchip: Add rockchip,rk3128-pwm
  dt-bindings: pwm: rockchip: Add description for rk3588
  pwm: sysfs: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  pwm: rockchip: Convert to use dev_err_probe()

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Fix 'mfd_of_node_list' OF node entry resource leak

  New Drivers:
   - Add support for Ocelot VSC7512 Networking Chip
   - Add support for MediaTek MT6370 subPMIC
   - Add support for Richtek RT5120 (I2C) PMIC

  New Device Support:
   - Add support for Rockchip RV1126 and RK3588 to Syscon
   - Add support for Rockchip RK817 Battery Charger to RK808
   - Add support for Silergy SY7636a Voltage Regulator to Simple MFD
   - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI
   - Add support for Secure Update to Intel M10 BMC

  New Functionality:
   - Provide SSP type to Intel's LPSS (PCI) SPI driver

  Fix-ups:
   - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon
   - Unify / simplify; intel_soc_pmic_crc
   - Trivial reordering / spelling, etc; Makefile, twl-core
   - Convert to managed resources; intel_soc_pmic_crc
   - Use appropriate APIs; intel_soc_pmic_crc
   - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core
   - GPIOD conversion; htc-i2cpld, stmpe
   - Add missing header file includes; twl4030-irq
   - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152,
     aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon,
     qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063

  Bug Fixes:
   - Properly check return values; sm501, htc-i2cpld
   - Repair Two-Wire Bus Mode; da9062-core
   - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788,
     lp8788-irq"

* tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: syscon: Remove repetition of the regmap_get_val_endian()
  mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE
  power: supply: Add charger driver for Rockchip RK817
  dt-bindings: mfd: mt6370: Fix the indentation in the example
  mfd: da9061: Fix Failed to set Two-Wire Bus Mode.
  mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe()
  dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018
  mfd: sm501: Add check for platform_driver_register()
  dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186
  mfd: twl4030: Add missed linux/device.h header
  dt-bindings: mfd: dlg,da9063: Add missing regulator patterns
  dt-bindings: mfd: sprd: Add bindings for ums512 global registers
  mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc
  dt-bindings: mfd: syscon: Add rk3588 QoS register compatible
  mfd: stmpe: Switch to using gpiod API
  mfd: qcom-spmi-pmic: Add pm7250b compatible
  dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
  mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver
  mfd: intel-m10-bmc: Add d5005 bmc secure update driver
  dt-bindings: mfd: syscon: Drop ref from reg-io-width
  ...

Pull HID updates from Benjamin Tissoires:

 - handle of all Logitech Bluetooth HID++ devices in the Logitech HID++
   drivers (Bastien Nocera)

 - fix broken atomic checks in hid-multitouch by adding memory barriers
   (Andri Yngvason)

 - better handling of devices with AMD SFH1.1 (Basavaraj Natikar)

 - better support of Nintendo clone controllers (Icenowy Zheng and
   Johnothan King)

 - Support for various RC controllers (Marcus Folkesson)

 - Add UGEEv2 support in hid-uclogic (XP-PEN Deco Pro S and Parblo A610
   PRO) (José Expósito)

 - some conversions to use dev_groups (Greg Kroah-Hartman)

 - HID-BPF preparatory patches, mostly to convert blank defines as enums
   (Benjamin Tissoires)

* tag 'for-linus-2022100501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (38 commits)
  HID: wacom: add three styli to wacom_intuos_get_tool_type
  HID: amd_sfh: Handle condition of "no sensors" for SFH1.1
  HID: amd_sfh: Change dev_err to dev_dbg for additional debug info
  HID: nintendo: check analog user calibration for plausibility
  HID: nintendo: deregister home LED when it fails
  HID: roccat: Fix use-after-free in roccat_read()
  hid: topre: Add driver fixing report descriptor
  HID: multitouch: Add memory barriers
  HID: convert defines of HID class requests into a proper enum
  HID: export hid_report_type to uapi
  HID: core: store the unique system identifier in hid_device
  HID: Add driver for PhoenixRC Flight Controller
  HID: Add driver for VRC-2 Car Controller
  HID: sony: Fix double word in comments
  hid: hid-logitech-hidpp: avoid unnecessary assignments in hidpp_connect_event
  HID: logitech-hidpp: Detect hi-res scrolling support
  HID: logitech-hidpp: Remove hard-coded "Sw. Id." for HID++ 2.0 commands
  HID: logitech-hidpp: Fix "Sw. Id." for HID++ 2.0 commands
  HID: logitech-hidpp: Remove special-casing of Bluetooth devices
  HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New driver for Mediatek MDP V3

 - New driver for NXP i.MX DW100 dewarper

 - Zoran driver got promoted from staging

 - Hantro and related drivers got promoted from staging

 - Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu,
   meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci,
   zr364xx)

 - Usual set of driver fixes, improvements and cleanups

* tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits)
  media: destage Hantro VPU driver
  media: platform: mtk-mdp3: add MediaTek MDP3 driver
  media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
  media: dt-binding: mediatek: add bindings for MediaTek MDP3 components
  media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
  media: xilinx: video: Add 1X12 greyscale format
  media: xilinx: csi2rxss: Add 1X12 greyscale format
  media: staging: media: imx: imx7-media-csi: Increase video mem limit
  media: uvcvideo: Limit power line control for Sonix Technology
  media: uvcvideo: Use entity get_cur in uvc_ctrl_set
  media: uvcvideo: Fix typo 'the the' in comment
  media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()
  media: uvcvideo: Fix memory leak in uvc_gpio_parse
  media: renesas: vsp1: Add support for RZ/G2L VSPD
  media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit
  media: renesas: vsp1: Add support for VSP software version
  media: renesas: vsp1: Add support to deassert/assert reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings
  media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
  media: amphion: fix a bug that vpu core may not resume after suspend
  ...

Pull ata updates from Damien Le Moal:

 - Print the timeout value for internal command failures due to a
   timeout (from Tomas)

 - Improve parameter names in ata_dev_set_feature() to clarify this
   function use (from Niklas)

 - Improve the ahci driver low power mode setting initialization to
   allow more flexibility for the user (from Rafael)

 - Several patches to remove redundant variables in libata-core,
   libata-eh and the pata_macio driver and to fix typos in comments
   (from Jinpeng, Shaomin, Ye)

 - Some code simplifications and macro renaming (for clarity) in various
   functions of libata-core (from me)

 - Add a missing check for a potential failure of sata_scr_read() in
   sata_print_link_status() (from Li)

 - Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options
   (from Lukas)

 - Cleanups of ata dt-bindings and improvements of libahci_platform,
   ahci and libahci code (from Serge)

 - New driver for Synopsys AHCI SATA controllers, based of the generic
   ahci code (from Serge). One compilation warning fix is added for this
   driver (from me)

 - Several fixes to macros used to discover a drive capabilities to be
   consistent with the ACS specifications (from Niklas)

 - A couple of simplifcations to some libata functions, removing
   unnecessary arguments (from Niklas)

 - An improvements to libata-eh code to avoid unnecessary link reset
   when revalidating a drive after a failed command. In practice, this
   extra, unneeded reset, reset does not cause any arm beyond slightly
   slowing down error recovery (from Niklas)

* tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits)
  ata: libata-eh: avoid needless hard reset when revalidating link
  ata: libata: drop superfluous ata_eh_analyze_tf() parameter
  ata: libata: drop superfluous ata_eh_request_sense() parameter
  ata: fix ata_id_has_dipm()
  ata: fix ata_id_has_ncq_autosense()
  ata: fix ata_id_has_devslp()
  ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
  ata: libata-eh: Remove the unneeded result variable
  ata: ahci_st: Enable compile test
  ata: ahci_st: Fix compilation warning
  MAINTAINERS: Add maintainers for DWC AHCI SATA driver
  ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support
  ata: ahci-dwc: Add platform-specific quirks support
  dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema
  ata: ahci: Add DWC AHCI SATA controller support
  ata: libahci_platform: Add function returning a clock-handle by id
  dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
  ata: ahci: Introduce firmware-specific caps initialization
  ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
  ata: libahci: Don't read AHCI version twice in the save-config method
  ...

Pull drm fix from Dave Airlie:
 "This reverts the patch I found with rough bisection to instability
  around fences and the oops I got from netconsole.

  sched:
   - revert patch causing oopses"

* tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/sched: Use parent fence instead of finished"

Pull passthrough updates from Jens Axboe:
 "With these changes, passthrough NVMe support over io_uring now
  performs at the same level as block device O_DIRECT, and in many cases
  6-8% better.

  This contains:

   - Add support for fixed buffers for passthrough (Anuj, Kanchan)

   - Enable batched allocations and freeing on passthrough, similarly to
     what we support on the normal storage path (me)

   - Fix from Geert fixing an issue with !CONFIG_IO_URING"

* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
  io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
  nvme: wire up fixed buffer support for nvme passthrough
  nvme: pass ubuffer as an integer
  block: extend functionality to map bvec iterator
  block: factor out blk_rq_map_bio_alloc helper
  block: rename bio_map_put to blk_mq_map_bio_put
  nvme: refactor nvme_alloc_request
  nvme: refactor nvme_add_user_metadata
  nvme: Use blk_rq_map_user_io helper
  scsi: Use blk_rq_map_user_io helper
  block: add blk_rq_map_user_io
  io_uring: introduce fixed buffer support for io_uring_cmd
  io_uring: add io_uring_cmd_import_fixed
  nvme: enable batched completions of passthrough IO
  nvme: split out metadata vs non metadata end_io uring_cmd completions
  block: allow end_io based requests in the completion batch handling
  block: change request end_io handler to pass back a return value
  block: enable batched allocation for blk_mq_alloc_request()
  block: kill deprecated BUG_ON() in the flush handling

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - handle number of queue changes in the TCP and RDMA drivers
        (Daniel Wagner)
      - allow changing the number of queues in nvmet (Daniel Wagner)
      - also consider host_iface when checking ip options (Daniel
        Wagner)
      - don't map pages which can't come from HIGHMEM (Fabio M. De
        Francesco)
      - avoid unnecessary flush bios in nvmet (Guixin Liu)
      - shrink and better pack the nvme_iod structure (Keith Busch)
      - add comment for unaligned "fake" nqn (Linjun Bao)
      - print actual source IP address through sysfs "address" attr
        (Martin Belanger)
      - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
      - handle effects after freeing the request (Keith Busch)
      - copy firmware_rev on each init (Keith Busch)
      - restrict management ioctls to admin (Keith Busch)
      - ensure subsystem reset is single threaded (Keith Busch)
      - report the actual number of tagset maps in nvme-pci (Keith
        Busch)
      - small fabrics authentication fixups (Christoph Hellwig)
      - add common code for tagset allocation and freeing (Christoph
        Hellwig)
      - stop using the request_queue in nvmet (Christoph Hellwig)
      - set min_align_mask before calculating max_hw_sectors (Rishabh
        Bhatnagar)
      - send a rediscover uevent when a persistent discovery controller
        reconnects (Sagi Grimberg)
      - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)

 - MD pull request via Song:
      - Various raid5 fix and clean up, by Logan Gunthorpe and David
        Sloan.
      - Raid10 performance optimization, by Yu Kuai.

 - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)

 - IO scheduler switching quisce fix (Keith)

 - s390/dasd block driver updates (Stefan)

 - support for recovery for the ublk driver (ZiyangZhang)

 - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)

 - blk-mq and null_blk map fixes (Bart)

 - various bcache fixes (Coly, Jilin, Jules)

 - nbd signal hang fix (Shigeru)

 - block writeback throttling fix (Yu)

 - optimize the passthrough mapping handling (me)

 - prepare block cgroups to being gendisk based (Christoph)

 - get rid of an old PSI hack in the block layer, moving it to the
   callers instead where it belongs (Christoph)

 - blk-throttle fixes and cleanups (Yu)

 - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
   Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
   Miaohe, Bart, Coly, Gaosheng

* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
  sbitmap: fix lockup while swapping
  block: add rationale for not using blk_mq_plug() when applicable
  block: adapt blk_mq_plug() to not plug for writes that require a zone lock
  s390/dasd: use blk_mq_alloc_disk
  blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
  nvmet: don't look at the request_queue in nvmet_bdev_set_limits
  nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
  blk-mq: use quiesced elevator switch when reinitializing queues
  block: replace blk_queue_nowait with bdev_nowait
  nvme: remove nvme_ctrl_init_connect_q
  nvme-loop: use the tagset alloc/free helpers
  nvme-loop: store the generic nvme_ctrl in set->driver_data
  nvme-loop: initialize sqsize later
  nvme-fc: use the tagset alloc/free helpers
  nvme-fc: store the generic nvme_ctrl in set->driver_data
  nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
  nvme-rdma: use the tagset alloc/free helpers
  nvme-rdma: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: use the tagset alloc/free helpers
  nvme-tcp: store the generic nvme_ctrl in set->driver_data
  ...

Pull io_uring updates from Jens Axboe:

 - Add supported for more directly managed task_work running.

   This is beneficial for real world applications that end up issuing
   lots of system calls as part of handling work. Normal task_work will
   always execute as we transition in and out of the kernel, even for
   "unrelated" system calls. It's more efficient to defer the handling
   of io_uring's deferred work until the application wants it to be run,
   generally in batches.

   As part of ongoing work to write an io_uring network backend for
   Thrift, this has been shown to greatly improve performance. (Dylan)

 - Add IOPOLL support for passthrough (Kanchan)

 - Improvements and fixes to the send zero-copy support (Pavel)

 - Partial IO handling fixes (Pavel)

 - CQE ordering fixes around CQ ring overflow (Pavel)

 - Support sendto() for non-zc as well (Pavel)

 - Support sendmsg for zerocopy (Pavel)

 - Networking iov_iter fix (Stefan)

 - Misc fixes and cleanups (Pavel, me)

* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
  io_uring/net: fix notif cqe reordering
  io_uring/net: don't update msg_name if not provided
  io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
  io_uring/rw: defer fsnotify calls to task context
  io_uring/net: fix fast_iov assignment in io_setup_async_msg()
  io_uring/net: fix non-zc send with address
  io_uring/net: don't skip notifs for failed requests
  io_uring/rw: don't lose short results on io_setup_async_rw()
  io_uring/rw: fix unexpected link breakage
  io_uring/net: fix cleanup double free free_iov init
  io_uring: fix CQE reordering
  io_uring/net: fix UAF in io_sendrecv_fail()
  selftest/net: adjust io_uring sendzc notif handling
  io_uring: ensure local task_work marks task as running
  io_uring/net: zerocopy sendmsg
  io_uring/net: combine fail handlers
  io_uring/net: rename io_sendzc()
  io_uring/net: support non-zerocopy sendto
  io_uring/net: refactor io_setup_async_addr
  io_uring/net: don't lose partial send_zc on fail
  ...

Pull ext2, udf, reiserfs, and quota updates from Jan Kara:

 - Fix for udf to make splicing work again

 - More disk format sanity checks for ext2 to avoid crashes found by
   syzbot

 - More quota disk format checks to avoid crashes found by fuzzing

 - Reiserfs & isofs cleanups

* tag 'fs-for_v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Add more checking after reading from quota file
  quota: Replace all block number checking with helper function
  quota: Check next/prev free block number after reading from quota file
  ext2: Use kvmalloc() for group descriptor array
  ext2: Add sanity checks for group and filesystem size
  udf: Support splicing to file
  isofs: delete unnecessary checks before brelse()
  fs/reiserfs: replace ternary operator with min() and min_t()

Pull fsnotify updates from Jan Kara:
 "Two cleanups for fsnotify code"

* tag 'fsnotify-for_v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Remove obsoleted fanotify_event_has_path()
  fsnotify: remove unused declaration

Pull ksmbd updates from Steve French:

 - RDMA (smbdirect) fixes

 - fixes for SMB3.1.1 POSIX Extensions (especially for id mapping)

 - various casemapping fixes for mount and lookup

 - UID mapping fixes

 - fix confusing error message

 - protocol negotiation fixes, including NTLMSSP fix

 - two encryption fixes

 - directory listing fix

 - some cleanup fixes

* tag '6.1-rc-ksmbd-fixes' of git://git.samba.org/ksmbd: (24 commits)
  ksmbd: validate share name from share config response
  ksmbd: call ib_drain_qp when disconnected
  ksmbd: make utf-8 file name comparison work in __caseless_lookup()
  ksmbd: Fix user namespace mapping
  ksmbd: hide socket error message when ipv6 config is disable
  ksmbd: reduce server smbdirect max send/receive segment sizes
  ksmbd: decrease the number of SMB3 smbdirect server SGEs
  ksmbd: Fix wrong return value and message length check in smb2_ioctl()
  ksmbd: set NTLMSSP_NEGOTIATE_SEAL flag to challenge blob
  ksmbd: fix encryption failure issue for session logoff response
  ksmbd: fix endless loop when encryption for response fails
  ksmbd: fill sids in SMB_FIND_FILE_POSIX_INFO response
  ksmbd: set file permission mode to match Samba server posix extension behavior
  ksmbd: change security id to the one samba used for posix extension
  ksmbd: update documentation
  ksmbd: casefold utf-8 share names and fix ascii lowercase conversion
  ksmbd: port to vfs{g,u}id_t and associated helpers
  ksmbd: fix incorrect handling of iterate_dir
  MAINTAINERS: remove Hyunchul Lee from ksmbd maintainers
  MAINTAINERS: Add Tom Talpey as ksmbd reviewer
  ...

Raw NAND core changes:
* Replace of_gpio_named_count() by gpiod_count()
  - Remove misguided comment of nand_get_device()
  - bbt: Use the bitmap API to allocate bitmaps

Raw NAND controller drivers changes:
* Meson:
  - Stop supporting legacy clocks
  - Refine resource getting in probe
  - Convert bindings to yaml
  - Fix clock handling and update the bindings accordingly
  - Fix bit map use in meson_nfc_ecc_correct()
* bcm47xx:
  - Fix spelling typo in comment
* STM32 FMC2:
  - Switch to using devm_fwnode_gpiod_get()
  - Fix dma_map_sg error check
* Cadence:
  - Remove an unneeded result variable
* Marvell:
  - Fix error handle regarding dma_map_sg
* Orion:
  - Use devm_clk_get_optional()
* Cafe:
  - Use correct function name in comment block
* Atmel:
  - Unmap streaming DMA mappings
* Arasan:
  - Stop using 0 as NULL pointer
* GPMI:
  - Fix typo 'the the' in comment
* BRCM:
  - Add individual glue driver selection
  - Move Kconfig to driver folder
* FSL: Fix none ECC mode
* Intel:
  - Use devm_platform_ioremap_resource_byname()
  - Remove unused clk_rate member from struct ebu_nand
  - Remove unused nand_pa member from ebu_nand_cs
  - Don't re-define NAND_DATA_IFACE_CHECK_ONLY
  - Remove undocumented compatible string
  - Fix compatible string in the bindings
  - Read the chip-select line from the correct OF node
  - Fix maximum chip select value in the bindings
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

This reverts commit e4dc45b1.

This is causing instability on Linus' desktop, and I'm seeing
oops with VK CTS runs.

netconsole got me the following oops:
[ 1234.778760] BUG: kernel NULL pointer dereference, address: 0000000000000088
[ 1234.778782] #PF: supervisor read access in kernel mode
[ 1234.778787] #PF: error_code(0x0000) - not-present page
[ 1234.778791] PGD 0 P4D 0
[ 1234.778798] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 1234.778803] CPU: 7 PID: 805 Comm: systemd-journal Not tainted 6.0.0+ #2
[ 1234.778809] Hardware name: System manufacturer System Product
Name/PRIME X370-PRO, BIOS 5603 07/28/2020
[ 1234.778813] RIP: 0010:drm_sched_job_done.isra.0+0xc/0x140 [gpu_sched]
[ 1234.778828] Code: aa 0f 1d ce e9 57 ff ff ff 48 89 d7 e8 9d 8f 3f
ce e9 4a ff ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 53
48 89 fb <48> 8b af 88 00 00 00 f0 ff 8d f0 00 00 00 48 8b 85 80 01 00
00 f0
[ 1234.778834] RSP: 0000:ffffabe680380de0 EFLAGS: 00010087
[ 1234.778839] RAX: ffffffffc04e9230 RBX: 0000000000000000 RCX: 0000000000000018
[ 1234.778897] RDX: 00000ba278e8977a RSI: ffff953fb288b460 RDI: 0000000000000000
[ 1234.778901] RBP: ffff953fb288b598 R08: 00000000000000e0 R09: ffff953fbd98b808
[ 1234.778905] R10: 0000000000000000 R11: ffffabe680380ff8 R12: ffffabe680380e00
[ 1234.778908] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff953fbd9ec458
[ 1234.778912] FS:  00007f35e7008580(0000) GS:ffff95428ebc0000(0000)
knlGS:0000000000000000
[ 1234.778916] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1234.778919] CR2: 0000000000000088 CR3: 000000010147c000 CR4: 00000000003506e0
[ 1234.778924] Call Trace:
[ 1234.778981]  <IRQ>
[ 1234.778989]  dma_fence_signal_timestamp_locked+0x6a/0xe0
[ 1234.778999]  dma_fence_signal+0x2c/0x50
[ 1234.779005]  amdgpu_fence_process+0xc8/0x140 [amdgpu]
[ 1234.779234]  sdma_v3_0_process_trap_irq+0x70/0x80 [amdgpu]
[ 1234.779395]  amdgpu_irq_dispatch+0xa9/0x1d0 [amdgpu]
[ 1234.779609]  amdgpu_ih_process+0x80/0x100 [amdgpu]
[ 1234.779783]  amdgpu_irq_handler+0x1f/0x60 [amdgpu]
[ 1234.779940]  __handle_irq_event_percpu+0x46/0x190
[ 1234.779946]  handle_irq_event+0x34/0x70
[ 1234.779949]  handle_edge_irq+0x9f/0x240
[ 1234.779954]  __common_interrupt+0x66/0x100
[ 1234.779960]  common_interrupt+0xa0/0xc0
[ 1234.779965]  </IRQ>
[ 1234.779968]  <TASK>
[ 1234.779971]  asm_common_interrupt+0x22/0x40
[ 1234.779976] RIP: 0010:finish_mkwrite_fault+0x22/0x110
[ 1234.779981] Code: 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 41 55 41
54 55 48 89 fd 53 48 8b 07 f6 40 50 08 0f 84 eb 00 00 00 48 8b 45 30
48 8b 18 <48> 89 df e8 66 bd ff ff 48 85 c0 74 0d 48 89 c2 83 e2 01 48
83 ea
[ 1234.779985] RSP: 0000:ffffabe680bcfd78 EFLAGS: 00000202

Revert it for now and figure it out later.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull iomap updates from Darrick Wong:
 "It's pretty quiet this time around -- a UAF bugfix and a new
  tracepoint so we can watch file writeback:

   - Fix a UAF bug when recording writeback mapping errors

   - Add a tracepoint so that we can monitor writeback mappings"

* tag 'iomap-6.1-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: add a tracepoint for mappings returned by map_blocks
  iomap: iomap: fix memory corruption when recording errors during writeback

Pull ext4 updates from Ted Ts'o:
 "The first two changes involve files outside of fs/ext4:

   - submit_bh() can never return an error, so change it to return void,
     and remove the unused checks from its callers

   - fix I_DIRTY_TIME handling so it will be set even if the inode
     already has I_DIRTY_INODE

  Performance:

   - Always enable i_version counter (as btrfs and xfs already do).
     Remove some uneeded i_version bumps to avoid unnecessary nfs cache
     invalidations

   - Wake up journal waiters in FIFO order, to avoid some journal users
     from not getting a journal handle for an unfairly long time

   - In ext4_write_begin() allocate any necessary buffer heads before
     starting the journal handle

   - Don't try to prefetch the block allocation bitmaps for a read-only
     file system

  Bug Fixes:

   - Fix a number of fast commit bugs, including resources leaks and out
     of bound references in various error handling paths and/or if the
     fast commit log is corrupted

   - Avoid stopping the online resize early when expanding a file system
     which is less than 16TiB to a size greater than 16TiB

   - Fix apparent metadata corruption caused by a race with a metadata
     buffer head getting migrated while it was trying to be read

   - Mark the lazy initialization thread freezable to prevent suspend
     failures

   - Other miscellaneous bug fixes

  Cleanups:

   - Break up the incredibly long ext4_full_super() function by
     refactoring to move code into more understandable, smaller
     functions

   - Remove the deprecated (and ignored) noacl and nouser_attr mount
     option

   - Factor out some common code in fast commit handling

   - Other miscellaneous cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (53 commits)
  ext4: fix potential out of bound read in ext4_fc_replay_scan()
  ext4: factor out ext4_fc_get_tl()
  ext4: introduce EXT4_FC_TAG_BASE_LEN helper
  ext4: factor out ext4_free_ext_path()
  ext4: remove unnecessary drop path references in mext_check_coverage()
  ext4: update 'state->fc_regions_size' after successful memory allocation
  ext4: fix potential memory leak in ext4_fc_record_regions()
  ext4: fix potential memory leak in ext4_fc_record_modified_inode()
  ext4: remove redundant checking in ext4_ioctl_checkpoint
  jbd2: add miss release buffer head in fc_do_one_pass()
  ext4: move DIOREAD_NOLOCK setting to ext4_set_def_opts()
  ext4: remove useless local variable 'blocksize'
  ext4: unify the ext4 super block loading operation
  ext4: factor out ext4_journal_data_mode_check()
  ext4: factor out ext4_load_and_init_journal()
  ext4: factor out ext4_group_desc_init() and ext4_group_desc_free()
  ext4: factor out ext4_geometry_check()
  ext4: factor out ext4_check_feature_compatibility()
  ext4: factor out ext4_init_metadata_csum()
  ext4: factor out ext4_encoding_init()
  ...

Pull affs update from David Sterba:
 "One minor update for AFFS, switching away from strlcpy"

* tag 'affs-for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: move from strlcpy with unused retval to strscpy

Pull btrfs updates from David Sterba:
 "There's a bunch of performance improvements, most notably the FIEMAP
  speedup, the new block group tree to speed up mount on large
  filesystems, more io_uring integration, some sysfs exports and the
  usual fixes and core updates.

  Summary:

  Performance:

   - outstanding FIEMAP speed improvement
      - algorithmic change how extents are enumerated leads to orders of
        magnitude speed boost (uncached and cached)
      - extent sharing check speedup (2.2x uncached, 3x cached)
      - add more cancellation points, allowing to interrupt seeking in
        files with large number of extents
      - more efficient hole and data seeking (4x uncached, 1.3x cached)
      - sample results:
	    256M, 32K extents:   4s ->  29ms  (~150x)
	    512M, 64K extents:  30s ->  59ms  (~550x)
	    1G,  128K extents: 225s -> 120ms (~1800x)

   - improved inode logging, especially for directories (on dbench
     workload throughput +25%, max latency -21%)

   - improved buffered IO, remove redundant extent state tracking,
     lowering memory consumption and avoiding rb tree traversal

   - add sysfs tunable to let qgroup temporarily skip exact accounting
     when deleting snapshot, leading to a speedup but requiring a rescan
     after that, will be used by snapper

   - support io_uring and buffered writes, until now it was just for
     direct IO, with the no-wait semantics implemented in the buffered
     write path it now works and leads to speed improvement in IOPS
     (2x), throughput (2.2x), latency (depends, 2x to 150x)

   - small performance improvements when dropping and searching for
     extent maps as well as when flushing delalloc in COW mode
     (throughput +5MB/s)

  User visible changes:

   - new incompatible feature block-group-tree adding a dedicated tree
     for tracking block groups, this allows a much faster load during
     mount and avoids seeking unlike when it's scattered in the extent
     tree items
      - this reduces mount time for many-terabyte sized filesystems
      - conversion tool will be provided so existing filesystem can also
        be updated in place
      - to reduce test matrix and feature combinations requires no-holes
        and free-space-tree (mkfs defaults since 5.15)

   - improved reporting of super block corruption detected by scrub

   - scrub also tries to repair super block and does not wait until next
     commit

   - discard stats and tunables are exported in sysfs
     (/sys/fs/btrfs/FSID/discard)

   - qgroup status is exported in sysfs
     (/sys/sys/fs/btrfs/FSID/qgroups/)

   - verify that super block was not modified when thawing filesystem

  Fixes:

   - FIEMAP fixes
      - fix extent sharing status, does not depend on the cached status
        where merged
      - flush delalloc so compressed extents are reported correctly

   - fix alignment of VMA for memory mapped files on THP

   - send: fix failures when processing inodes with no links (orphan
     files and directories)

   - fix race between quota enable and quota rescan ioctl

   - handle more corner cases for read-only compat feature verification

   - fix missed extent on fsync after dropping extent maps

  Core:

   - lockdep annotations to validate various transactions states and
     state transitions

   - preliminary support for fs-verity in send

   - more effective memory use in scrub for subpage where sector is
     smaller than page

   - block group caching progress logic has been removed, load is now
     synchronous

   - simplify end IO callbacks and bio handling, use chained bios
     instead of own tracking

   - add no-wait semantics to several functions (tree search, nocow,
     flushing, buffered write

   - cleanups and refactoring

  MM changes:

   - export balance_dirty_pages_ratelimited_flags"

* tag 'for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (177 commits)
  btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
  btrfs: drop extent map range more efficiently
  btrfs: avoid pointless extent map tree search when flushing delalloc
  btrfs: remove unnecessary next extent map search
  btrfs: remove unnecessary NULL pointer checks when searching extent maps
  btrfs: assert tree is locked when clearing extent map from logging
  btrfs: remove unnecessary extent map initializations
  btrfs: remove the refcount warning/check at free_extent_map()
  btrfs: add helper to replace extent map range with a new extent map
  btrfs: move open coded extent map tree deletion out of inode eviction
  btrfs: use cond_resched_rwlock_write() during inode eviction
  btrfs: use extent_map_end() at btrfs_drop_extent_map_range()
  btrfs: move btrfs_drop_extent_cache() to extent_map.c
  btrfs: fix missed extent on fsync after dropping extent maps
  btrfs: remove stale prototype of btrfs_write_inode
  btrfs: enable nowait async buffered writes
  btrfs: assert nowait mode is not used for some btree search functions
  btrfs: make btrfs_buffered_write nowait compatible
  btrfs: plumb NOWAIT through the write path
  btrfs: make lock_and_cleanup_extent_if_need nowait compatible
  ...

Pull vfs constification updates from Al Viro:
 "whack-a-mole: constifying struct path *"

* tag 'pull-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ecryptfs: constify path
  spufs: constify path
  nd_jump_link(): constify path
  audit_init_parent(): constify path
  __io_setxattr(): constify path
  do_proc_readlink(): constify path
  overlayfs: constify path
  fs/notify: constify path
  may_linkat(): constify path
  do_sys_name_to_handle(): constify path
  ->getprocattr(): attribute name is const char *, TYVM...

Pull misc tomoyo changes from Al Viro:
 "A couple of assorted tomoyo patches"

* tag 'pull-tomoyo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  tomoyo: struct path it might get from LSM callers won't have NULL dentry or mnt
  tomoyo: use vsnprintf() properly

Pull file_inode() updates from Al Vrio:
 "whack-a-mole: cropped up open-coded file_inode() uses..."

* tag 'pull-file_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: use ->f_mapping
  _nfs42_proc_copy(): use ->f_mapping instead of file_inode()->i_mapping
  dma_buf: no need to bother with file_inode()->i_mapping
  nfs_finish_open(): don't open-code file_inode()
  bprm_fill_uid(): don't open-code file_inode()
  sgx: use ->f_mapping...
  exfat_iterate(): don't open-code file_inode(file)
  ibmvmc: don't open-code file_inode()

Pull vfs file updates from Al Viro:
 "struct file-related stuff"

* tag 'pull-file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  dma_buf_getfile(): don't bother with ->f_flags reassignments
  Change calling conventions for filldir_t
  locks: fix TOCTOU race when granting write lease

Pull vfs d_path updates from Al Viro.

* tag 'pull-d_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  d_path.c: typo fix...
  dynamic_dname(): drop unused dentry argument

Pull vfs inode update from Al Viro:
 "Saner inode_init_always(), also fixing a nilfs problem"

* tag 'pull-inode' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: fix UAF/GPF bug in nilfs_mdt_destroy

Trvial merge conflicts against rdma.git for-rc resolved matching
linux-next:
            drivers/infiniband/hw/hns/hns_roce_hw_v2.c
            drivers/infiniband/hw/hns/hns_roce_main.c

https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.orgSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'linux-kselftest-kunit-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several documentation fixes, UML related cleanups, and a feature to
  enable/disable KUnit tests

  This includes the change to rename all_test_uml.config, and use it for
  '--alltests'. Note: if anyone was using all_tests_uml.config, this
  change breaks them.

  This change simplifies the usage and eliminates the need to type:

     --kunitconfig=tools/testing/kunit/configs/all_tests_uml.config

  A simple workaround to create a symlink to the new name can solve the
  problem for anyone using all_tests_uml.config.

  all_tests_uml.config should work across ~all architectures"

* tag 'linux-kselftest-kunit-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: Kunit: Use full path to .kunitconfig
  kunit: tool: rename all_test_uml.config, use it for --alltests
  kunit: tool: remove UML specific options from all_tests_uml.config
  lib: stackinit: update reference to kunit-tool
  lib: overflow: update reference to kunit-tool
  Documentation: KUnit: update links in the index page
  Documentation: KUnit: add intro to the getting-started page
  Documentation: KUnit: Reword start guide for selecting tests
  Documentation: KUnit: add note about mrproper in start.rst
  Documentation: KUnit: avoid repeating "kunit.py run" in start.rst
  Documentation: KUnit: remove duplicated docs for kunit_tool
  Documentation: Kunit: Add ref for other kinds of tests
  Documentation: KUnit: Fix non-uml anchor
  Documentation: Kunit: Fix inconsistent titles
  Documentation: kunit: fix trivial typo
  kunit: no longer call module_info(test, "Y") for kunit modules
  kunit: add kunit.enable to enable/disable KUnit test
  kunit: tool: make --raw_output=kunit (aka --raw_output) preserve leading spaces

Merge tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "Fixes and new tests:

   - Add an amd-pstate-ut test module, used by kselftest to unit test
     amd-pstate functionality

   - Fixes and cleanups to to cpu-hotplug to delete the fault injection
     test code

   - Improvements to vm test to use top_srcdir for builds"

* tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  docs:kselftest: fix kselftest_module.h path of example module
  cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
  selftests/cpu-hotplug: Add log info when test success
  selftests/cpu-hotplug: Reserve one cpu online at least
  selftests/cpu-hotplug: Delete fault injection related code
  selftests/cpu-hotplug: Use return instead of exit
  selftests/cpu-hotplug: Correct log info
  cpufreq: amd-pstate: modify type in argument 2 for filp_open
  Documentation: amd-pstate: Add unit test introduction
  selftests: amd-pstate: Add test trigger for amd-pstate driver
  cpufreq: amd-pstate: Add test module for amd-pstate driver
  cpufreq: amd-pstate: Expose struct amd_cpudata
  selftests/vm: use top_srcdir instead of recomputing relative paths