An error occurred fetching the project authors.
- 21 Mar, 2022 19 commits
-
-
Tong Zhang authored
"RX USB to short" -> "RX USB too short" Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Casper Andersson says: ==================== net: sparx5: Add multicast support Add multicast support to Sparx5. ==================== Signed-off-by: -
Casper Andersson authored
Adds mdb handlers. Uses the PGID arbiter to find a free entry in the PGID table for the multicast group port mask. Signed-off-by:
Casper Andersson <casper.casan@gmail.com> Signed-off-by:
-
Casper Andersson authored
The PGID (Port Group ID) table holds port masks for different purposes. The first 72 are reserved for port destination masks, flood masks, and CPU forwarding. The rest are shared between multicast, link aggregation, and virtualization profiles. The GLAG area is reserved to not be used by anything else, since it is a subset of the MCAST area. The arbiter keeps track of which entries are in use. You can ask for a free ID or give back one you are done using. Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== nfp: support for NFP-3800 Yinjun Zhan says: This is the second of a two part series to support the NFP-3800 device. To utilize the new hardware features of the NFP-3800, driver adds support of a new data path NFDK. This series mainly does some refactor work to the data path related implementations. The data path specific implementations are now separated into nfd3 and nfdk directories respectively, and the common part is also moved into a new file. * The series starts with a small refinement in Patch 1/10. Patches 2/10 and 3/10 are the main refactoring of data path implementation, which prepares for the adding the NFDK data path. * Before the introduction of NFDK, there's some more preparation work for NFP-3800 features, such as multi-descriptor per-packet and write-back mechanism of TX pointer, which is done in patches 4/10, 5/10, 6/10, 7/10. * Patch 8/10 allows the driver to select data path according to firmware version. Finally, patches 9/10 and 10/10 introduce the new NFDK data path. Changes between v1 and v2 * Correct kdoc for nfp_nfdk_tx() * Correct build warnings on 32-bit Thanks to everyone who contributed to this work. ==================== Signed-off-by: -
Yinjun Zhang authored
Due to the different definition of txbuf in NFDK comparing to NFD3, there're no pre-allocated txbufs for xdp use in NFDK's implementation, we just use the existed rxbuf and recycle it when xdp tx is completed. For each packet to transmit in xdp path, we cannot use more than `NFDK_TX_DESC_PER_SIMPLE_PKT` txbufs, one is to stash virtual address, and another is for dma address, so currently the amount of transmitted bytes is not accumulated. Also we borrow the last bit of virtual addr to indicate a new transmitted packet due to address's alignment attribution. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Fei Qin <fei.qin@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Jakub Kicinski authored
Add new data path. The TX is completely different, each packet has multiple descriptor entries (between 2 and 32). TX ring is divided into blocks 32 descriptor, and descritors of one packet can't cross block bounds. The RX side is the same for now. ABI version 5 or later is required. There is no support for VLAN insertion on TX. XDP_TX action and AF_XDP zero-copy is not implemented in NFDK path. Changes to Jakub's work: * Move statistics of hw_csum_tx after jumbo packet's segmentation. * Set L3_CSUM flag to enable recaculating of L3 header checksum in ipv4 case. * Mark the case of TSO a packet with metadata prepended as unsupported. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Xingfeng Hu <xingfeng.hu@corigine.com> Signed-off-by:
Dianchao Wang <dianchao.wang@corigine.com> Signed-off-by:
-
Jakub Kicinski authored
Prepare for choosing data path based on the firmware version field. Exploit one bit from the reserved byte in the firmware version field as the data path type. We need the firmware version right after vNIC is allocated, so it has to be read inside nfp_net_alloc(), callers don't have to set it afterwards. Following patches will bring the implementation of the second data path. Signed-off-by:
-
Jakub Kicinski authored
Make sure that features supported only by some of the data paths are not enabled for all. Add a mask of supported features into the data path op structure. Signed-off-by:
-
Jakub Kicinski authored
Newer versions of the PCIe microcode support writing back the position of the TX pointer back into host memory. This speeds up TX completions, because we avoid a read from device memory (replacing PCIe read with DMA coherent read). Signed-off-by:
-
Jakub Kicinski authored
QCidx is not used on fast path, move it to the lower cacheline. Signed-off-by:
-
Jakub Kicinski authored
New datapaths may use multiple descriptor units to describe a single packet. Prepare for that by adding a descriptors per simple frame constant into ring size calculations. Signed-off-by:
-
Jakub Kicinski authored
To reduce the coupling of slow path ring implementations and their callers, use callbacks instead. Changes to Jakub's work: * Also use callbacks for xmit functions Signed-off-by:
-
Jakub Kicinski authored
In preparation for support for a new datapath format move all ring and fast path logic into separate files. It is basically a verbatim move with some wrapping functions, no new structures and functions added. The current data path is called NFD3 from the initial version of the driver ABI it used. The non-fast path, but ring related functions are moved to nfp_net_dp.c file. Changes to Jakub's work: * Rebase on xsk related code. * Split the patch, move the callback changes to next commit. Signed-off-by:
-
Jakub Kicinski authored
Ring enable masks are 64bit long. Replace mask calculation from: block_cnt == 64 ? 0xffffffffffffffffULL : (1 << block_cnt) - 1 with: (U64_MAX >> (64 - block_cnt)) to simplify the code. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next. This patchset contains updates for the nf_tables register tracking infrastructure, disable bogus warning when attaching ct helpers, one namespace pollution fix and few cleanups for the flowtable. 1) Revisit conntrack gc routine to reduce chances of overruning the netlink buffer from the event path. From Florian Westphal. 2) Disable warning on explicit ct helper assignment, from Phil Sutter. 3) Read-only expressions do not update registers, mark them as NFT_REDUCE_READONLY. Add helper functions to update the register tracking information. This patch re-enables the register tracking infrastructure. 4) Cancel register tracking in case an expression fully/partially clobbers existing data. 5) Add register tracking support for remaining expressions: ct, lookup, meta, numgen, osf, hash, immediate, socket, xfrm, tunnel, fib, exthdr. 6) Rename init and exit functions for the conntrack h323 helper, from Randy Dunlap. 7) Remove redundant field in struct flow_offload_work. 8) Update nf_flow_table_iterate() to pass flowtable to callback. ==================== Signed-off-by: -
Casper Andersson authored
Standalone ports use vid 0. Let the bridge use vid 1 when "vlan_default_pvid 0" is set to avoid collisions. Since no VLAN is created when default pvid is 0 this is set at "PORT_ATTR_SET" and handled in the Switchdev fdb handler. Signed-off-by:
-
Wan Jiabing authored
allocated_mem is allocated by kcalloc(). The memory is set to zero. It is unnecessary to call memset again. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Wang Yufen authored
In calipso_map_cat_ntoh(), in the for loop, if the return value of netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses of bitmap[byte_offset] occurs. The bug was found during fuzzing. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252 CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x21c/0x230 show_stack+0x1c/0x60 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0x70/0x2d0 __kasan_report+0x158/0x16c kasan_report+0x74/0x120 __asan_load1+0x80/0xa0 netlbl_bitmap_walk+0x3c/0xd0 calipso_opt_getattr+0x1a8/0x230 calipso_sock_getattr+0x218/0x340 calipso_sock_getattr+0x44/0x60 netlbl_sock_getattr+0x44/0x80 selinux_netlbl_socket_setsockopt+0x138/0x170 selinux_socket_setsockopt+0x4c/0x60 security_socket_setsockopt+0x4c/0x90 __sys_setsockopt+0xbc/0x2b0 __arm64_sys_setsockopt+0x6c/0x84 invoke_syscall+0x64/0x190 el0_svc_common.constprop.0+0x88/0x200 do_el0_svc+0x88/0xa0 el0_svc+0x128/0x1b0 el0t_64_sync_handler+0x9c/0x120 el0t_64_sync+0x16c/0x170 Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
- 19 Mar, 2022 21 commits
-
-
Pablo Neira Ayuso authored
The flowtable object is already passed as argument to nf_flow_table_iterate(), do use not data pointer to pass flowtable. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Already available through the flowtable object, remove it. Signed-off-by: -
Randy Dunlap authored
Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Fixes: f587de0e ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
Check if we can elide the load. Cancel if the new candidate isn't identical to previous store. Signed-off-by:
-
Florian Westphal authored
The fib expression stores to a register, so we can't add empty stub. Check that the register that is being written is in fact redundant. In most cases, this is expected to cancel tracking as re-use is unlikely. Signed-off-by:
-
Pablo Neira Ayuso authored
Check if the destination register already contains the data that this tunnel expression performs. This allows to skip this redundant operation. If the destination contains a different selector, update the register tracking information. This patch does not perform bitwise tracking. Signed-off-by: -
Pablo Neira Ayuso authored
Check if the destination register already contains the data that this xfrm expression performs. This allows to skip this redundant operation. If the destination contains a different selector, update the register tracking information. Signed-off-by: -
Pablo Neira Ayuso authored
Check if the destination register already contains the data that this socket expression performs. This allows to skip this redundant operation. If the destination contains a different selector, update the register tracking information. Signed-off-by: -
Pablo Neira Ayuso authored
The immediate expression might clobber existing data on the registers, cancel register tracking for the destination register. Signed-off-by: -
Pablo Neira Ayuso authored
Check if the destination register already contains the data that this osf expression performs. Always cancel register tracking for jhash since this requires tracking multiple source registers in case of concatenations. Perform register tracking (without bitwise) for symhash since input does not come from source register. Signed-off-by: -
Pablo Neira Ayuso authored
Allow to recycle the previous output of the OS fingerprint expression if flags and ttl are the same. Signed-off-by: -
Pablo Neira Ayuso authored
Random and increment are stateful, each invocation results in fresh output. Cancel register tracking for these two expressions. Signed-off-by: -
Florian Westphal authored
its enough to export the meta get reduce helper and then call it from nft_meta_bridge too. Signed-off-by:
-
Florian Westphal authored
In most cases, nft_lookup will be read-only, i.e. won't clobber registers. In case of map, we need to cancel the registers that will see stores. Signed-off-by:
-
Pablo Neira Ayuso authored
Check if the destination register already contains the data that this ct expression performs. This allows to skip this redundant operation. If the destination contains a different selector, update the register tracking information. Export nft_expr_reduce_bitwise as a symbol since nft_ct might be compiled as a module. Signed-off-by: -
Pablo Neira Ayuso authored
Output of expressions might be larger than one single register, this might clobber existing data. Reset tracking for all destination registers that required to store the expression output. This patch adds three new helper functions: - nft_reg_track_update: cancel previous register tracking and update it. - nft_reg_track_cancel: cancel any previous register tracking info. - __nft_reg_track_cancel: cancel only one single register tracking info. Partial register clobbering detection is also supported by checking the .num_reg field which describes the number of register that are used. This patch updates the following expressions: - meta_bridge - bitwise - byteorder - meta - payload to use these helper functions. Signed-off-by: -
Pablo Neira Ayuso authored
Skip register tracking for expressions that perform read-only operations on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to avoid defining stubs for these expressions. This patch re-enables register tracking which was disabled in ed5f85d4 ("netfilter: nf_tables: disable register tracking"). Follow up patches add remaining register tracking for existing expressions. Signed-off-by:
-
Phil Sutter authored
The function sets the pernet boolean to avoid the spurious warning from nf_ct_lookup_helper() when assigning conntrack helpers via nftables. Fixes: 1a64edf5 ("netfilter: nft_ct: add helper set support") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Florian Westphal authored
as of commit 4608fdfc ("netfilter: conntrack: collect all entries in one cycle") conntrack gc was changed to run every 2 minutes. On systems where conntrack hash table is set to large value, most evictions happen from gc worker rather than the packet path due to hash table distribution. This causes netlink event overflows when events are collected. This change collects average expiry of scanned entries and reschedules to the average remaining value, within 1 to 60 second interval. To avoid event overflows, reschedule after each bucket and add a limit for both run time and number of evictions per run. If more entries have to be evicted, reschedule and restart 1 jiffy into the future. Reported-by:
Karel Rericha <karel@maxtel.cz> Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Eyal Birger <eyal.birger@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2022-03-18 1) XDP multi buffer support This series enables XDP on non-linear legacy RQ in multi buffer mode. When XDP is enabled, fragmentation scheme on non-linear legacy RQ is adjusted to comply to limitations of XDP multi buffer (fragments of the same size). DMA addresses of fragments are stored in struct page for the completion handler to be able to unmap them. XDP_TX is supported. XDP_REDIRECT is not yet supported, the XDP core blocks it for multi buffer packets at the moment. 2) Trivial cleanups ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller authored
ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-03-19 1) Delete duplicated functions that calls same xfrm_api_check. From Leon Romanovsky. 2) Align userland API of the default policy structure to the internal structures. From Nicolas Dichtel. ==================== Signed-off-by:
-
