Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch fixes the following build warning:
arch/mips/ar7/memory.c: In function 'memsize':
arch/mips/ar7/memory.c:55: warning: passing argument 1 of 'writel' makes integer from pointer without a cast
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some SiliconImage PCIe SATA controlers are not detected when the bus
numbers differ.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The rbtx4939_update_ioc_pen() expects txx9_ce_res[] already initialized.
Call it after tx4939_setup().
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The current interrupt handling code for the MSP4200 always masks an
interrupt before acknowledging it.  This is not required, as that will be
handled by the level interrupt handler.  This change simplifies the MSP4200
code to remove the masking in the ack routine, and makes sure that the
minimum required operation is performed for masking and acking, rather
than always both masking and acking the interrupt.
Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Trying to build a PMC-Sierra MSP4200 VoIP gateway defconfig will not work
since MIPS34K_MISSED_ITLB_WAR is not defined for all boards supported
within pmc-serria/msp71xx. This patch defines MIPS34K_MISSED_ITLB_WAR to
prevent such build failures:

  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-mips
  CC      arch/mips/kernel/asm-offsets.s
In file included fromlinux-msp71xx/linux-2.6.29/arch/mips/include/asm/bitops.h:24,
                 from include/linux/bitops.h:17,
                 from include/linux/kernel.h:15,
                 from include/linux/sched.h:52,
                 from arch/mips/kernel/asm-offsets.c:13:
linux-msp71xx/linux-2.6.29/arch/mips/include/asm/war.h:241:2: error: #error Check setting of MIPS34K_MISSED_ITLB_WAR for your
platform

This fixes a compile error when building for the MSP4200 boards.  Identical
patches to fix this were send by

  Florian Fainelli <florian@openwrt.org>
  Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Trying to build MSP4200 VoIP defconfig also fails on msp_irq_slp.c with a
non-existing reference to mask_slp_irq, which is in turn mask_msp_slp_irq.
Passed that, we will also miss a comma when calling
set_irq_chip_and_handler. This patch fixes both issues.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Loading of modules with unresolved weak symbols fails on MIPS
since '88173507'.

Modules: handle symbols that have a zero value

The module subsystem cannot handle symbols that are zero.  If symbols
are present that have a zero value then the module resolver prints out a
message that these symbols are unresolved.

We have to use IS_ERR_VALUE() to check that a symbol has been resolved
or not.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Raghu Gandham <raghu@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks when SMTC support
is enabled on Malta.
Signed-off-by: Raghu Gandham <raghu@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The resume() implementation octeon_switch.S examines the saved cp0_status
register.  We were clobbering the entire pt_regs structure in kernel
threads leading to random crashes.

When switching away from a kernel thread, the saved cp0_status is examined
and if bit 30 is set it is cleared and the CP2 state saved into the pt_regs
structure.  Since the kernel thread stack overlaid the pt_regs structure
this resulted in a corrupt stack.  When the kthread with the corrupt stack
was resumed, it could crash if it used any of the data in the stack that was
clobbered.

We fix it by moving the kernel thread stack down so it doesn't overlay
pt_regs.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

cc1: warnings being treated as errors
arch/mips/mipssim/sim_time.c: In function 'get_c0_compare_int':
arch/mips/mipssim/sim_time.c:103: warning: ISO C90 forbids mixed declarations and code
arch/mips/mipssim/sim_time.c:116: error: expected declaration or statement at end of input
make[1]: *** [arch/mips/mipssim/sim_time.o] Error 1
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks compiling MIPS
with SMP disabled.  This patch fixes that.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix the pagefault oom path which does not drop mm->mmap_sem.
This was introduced by commit c7c1e384Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

They tend to get not updated when files are moved around or copied and
lack any obvious use.  While at it zap some only too obvious comments and
as per Shinya's suggestion, add a copyright header to extable.c.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://neil.brown.name/md:
  md: Use revalidate_disk to effect changes in size of device.
  md: allow raid5_quiesce to work properly when reshape is happening.
  md/raid5: set reshape_position correctly when reshape starts.
  md: Handle growth of v1.x metadata correctly.
  md: avoid array overflow with bad v1.x metadata
  md: when a level change reduces the number of devices, remove the excess.
  md: Push down data integrity code to personalities.
  md/raid6: release spare page at ->stop()

As revalidate_disk calls check_disk_size_change, it will cause
any capacity change of a gendisk to be propagated to the blockdev
inode.  So use that instead of mucking about with locks and
i_size_write.

Also add a call to revalidate_disk in do_md_run and a few other places
where the gendisk capacity is changed.
Signed-off-by: NeilBrown <neilb@suse.de>

The ->quiesce method is not supposed to stop resync/recovery/reshape,
just normal IO.
But in raid5 we don't have a way to know which stripes are being
used for normal IO and which for resync etc, so we need to wait for
all stripes to be idle to be sure that all writes have completed.

However reshape keeps at least some stripe busy for an extended period
of time, so a call to raid5_quiesce can block for several seconds
needlessly.
So arrange for reshape etc to pause briefly while raid5_quiesce is
trying to quiesce the array so that the active_stripes count can
drop to zero.
Signed-off-by: NeilBrown <neilb@suse.de>

As the internal reshape_progress counter is the main driver
for reshape, the fact that reshape_position sometimes starts with the
wrong value has minimal effect.  It is visible in sysfs and that
is all.
Signed-off-by: NeilBrown <neilb@suse.de>

The v1.x metadata does not have a fixed size and can grow
when devices are added.
If it grows enough to require an extra sector of storage,
we need to update the 'sb_size' to match.

Without this, md can write out an incomplete superblock with a
bad checksum, which will be rejected when trying to re-assemble
the array.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

We trust the 'desc_nr' field in v1.x metadata enough to use it
as an index in an array.  This isn't really safe.
So range-check the value first.
Signed-off-by: NeilBrown <neilb@suse.de>

When an array is changed from RAID6 to RAID5, fewer drives are
needed.  So any device that is made superfluous by the level
conversion must be marked as not-active.
For the RAID6->RAID5 conversion, this will be a drive which only
has 'Q' blocks on it.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

This patch replaces md_integrity_check() by two new public functions:
md_integrity_register() and md_integrity_add_rdev() which are both
personality-independent.

md_integrity_register() is called from the ->run and ->hot_remove
methods of all personalities that support data integrity.  The
function iterates over the component devices of the array and
determines if all active devices are integrity capable and if their
profiles match. If this is the case, the common profile is registered
for the mddev via blk_integrity_register().

The second new function, md_integrity_add_rdev() is called from the
->hot_add_disk methods, i.e. whenever a new device is being added
to a raid array. If the new device does not support data integrity,
or has a profile different from the one already registered, data
integrity for the mddev is disabled.

For raid0 and linear, only the call to md_integrity_register() from
the ->run method is necessary.
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Fix COH 901 327 watchdog enablement

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  eeepc-laptop: fix hot-unplug on resume
  ACPI: Ingore the memory block with zero block size in course of memory hotplug
  ACPI: Don't treat generic error as ACPI error code in acpi memory hotplug driver
  ACPI: bind workqueues to CPU 0 to avoid SMI corruption
  ACPI: root-only read protection on /sys/firmware/acpi/tables/*
  thinkpad-acpi: fix incorrect use of TPACPI_BRGHT_MODE_ECNVRAM
  thinkpad-acpi: restrict procfs count value to sane upper limit
  thinkpad-acpi: remove dock and bay subdrivers
  thinkpad-acpi: disable broken bay and dock subdrivers
  hp-wmi: check that an input device exists in resume handler
  Revert "ACPICA: Remove obsolete acpi_os_validate_address interface"

Clearly, I am a glutton for punishment.  I'll see if I can see Alan's
changes through to the end, otherwise I'll be fending off a lot of bug
reports for usb-serial devices.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This function has traditionally used "insert_resource()", because before
commit cebd78a8 ("Fix pci_claim_resource") it used to just insert the
resource into whatever root resource tree that was indicated by
"pcibios_select_root()".

So there Matthew fixed it to actually look up the proper parent
resource, which means that now it's actively wrong to then traverse the
resource tree any more: we already know exactly where the new resource
should go.

And when we then did commit a76117df ("x86: Use pci_claim_resource"),
which changed the x86 PCI code from the open-coded

	pr = pci_find_parent_resource(dev, r);
	if (!pr || request_resource(pr, r) < 0) {

to using

	if (pci_claim_resource(dev, idx) < 0) {

that "insert_resource()" now suddenly became a problem, and causes a
regression covered by

	http://bugzilla.kernel.org/show_bug.cgi?id=13891

which this fixes.
Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since the COH 901 327 found in U300 is clocked at 32 kHz we need
to wait for the interrupt clearing flag to propagate through
hardware in order not to accidentally fire off any interrupts
when we enable them.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

OOPS on resume when the wireless adaptor is disabled during suspend was
introduced by "eeepc-laptop: read rfkill soft-blocked state on resume".

Unable to handle kernel NULL pointer dereference

Process s2disk
Tainted: G W
IP: klist_put

Call trace:
? klist_del
? device_del
? device_unregister
? pci_stop_dev
? pci_stop_bus
? pci_remove_device
? eeepc_rfkill_hotplug [eeepc_laptop]
? eeepc_hotk_resume [eeepc_laptop]
? acpi_device_resume
? device_resume
? hibernation_snapshot

It appears the PCI device is removed twice.  The eeepc_rfkill_hotplug()
call from the resume handler is racing against the call from the ACPI
notifier callback.  The ACPI notification is triggered by the resume
handler when it refreshes the value of CM_ASL_WLAN.

The fix is to serialize hotplug calls using a workqueue.

http://bugzilla.kernel.org/show_bug.cgi?id=13825Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

If the memory block size is zero, ignore it and don't do the memory hotplug
flowchart. Otherwise it will complain the following warning message:
  >System RAM resource 0 - ffffffffffffffff cannot be added
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Don't treat the generic error as ACPI error code. Otherwise when the generic
code is returned, it will complain the following warning messag:
   >ACPI Exception (acpi_memhotplug-0171): UNKNOWN_STATUS_CODE,
		Cannot get acpi bus device [20080609]
   >ACPI: Cannot find driver data
   > ACPI Error (utglobal-0127): Unknown exception code: 0xFFFFFFED [20080609]
   > Pid: 85, comm: kacpi_notify Not tainted 2.6.27.19-5-default #1
     Call Trace:
     [<ffffffff8020da29>] show_trace_log_lvl+0x41/0x58
     [<ffffffff8049a3da>] dump_stack+0x69/0x6f
    .....

At the same time when the generic error code is returned, the ACPI_EXCEPTION
is replaced by the printk.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

On some machines, a software-initiated SMI causes corruption unless the
SMI runs on CPU 0.  An SMI can be initiated by any AML, but typically it's
done in GPE-related methods that are run via workqueues, so we can avoid
the known corruption cases by binding the workqueues to CPU 0.

References:
    http://bugzilla.kernel.org/show_bug.cgi?id=13751
    https://bugs.launchpad.net/bugs/157171
    https://bugs.launchpad.net/bugs/157691Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>