Pull audit updates from Paul Moore:
 "The audit updates are fairly minor with only two patches:

   - Send an audit ACK to userspace immediately upon receiving an auditd
     registration event as opposed to waiting until the registration has
     been fully processed and the audit backlog starts filling the
     netlink buffers.

     Sending the ACK earlier, as done here, is still safe as the
     operation should not fail at the point when the ACK is done, and
     doing so helps avoid the ACK being dropped in extreme situations.

   - Update the audit MAINTAINERS entry with additional information.

     There isn't anything in this update that should be new to regular
     contributors or list subscribers, but I'm pushing to start
     documenting our processes, conventions, etc. and this seems like an
     important part of that"

* tag 'audit-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  MAINTAINERS: update the audit entry
  audit: Send netlink ACK before setting connection in auditd_set

Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "Quite a lot of kexec work this time around. Many singleton patches in
  many places. The notable patch series are:

   - nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
     conversions for file paths'.

   - Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
     Folio conversions for directory paths'.

   - IA64 remnant removal in Heiko Carstens's 'Remove unused code after
     IA-64 removal'.

   - Arnd Bergmann has enabled the -Wmissing-prototypes warning
     everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
     some followup fixes:

      - Nathan Chancellor has cleaned up the hexagon build in the series
        'hexagon: Fix up instances of -Wmissing-prototypes'.

      - Nathan also addressed some s390 warnings in 's390: A couple of
        fixes for -Wmissing-prototypes'.

      - Arnd Bergmann addresses the same warnings for MIPS in his series
        'mips: address -Wmissing-prototypes warnings'.

   - Baoquan He has made kexec_file operate in a top-down-fitting manner
     similar to kexec_load in the series 'kexec_file: Load kernel at top
     of system RAM if required'

   - Baoquan He has also added the self-explanatory 'kexec_file: print
     out debugging message if required'.

   - Some checkstack maintenance work from Tiezhu Yang in the series
     'Modify some code about checkstack'.

   - Douglas Anderson has disentangled the watchdog code's logging when
     multiple reports are occurring simultaneously. The series is
     'watchdog: Better handling of concurrent lockups'.

   - Yuntao Wang has contributed some maintenance work on the crash code
     in 'crash: Some cleanups and fixes'"

* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
  crash_core: fix and simplify the logic of crash_exclude_mem_range()
  x86/crash: use SZ_1M macro instead of hardcoded value
  x86/crash: remove the unused image parameter from prepare_elf_headers()
  kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
  scripts/decode_stacktrace.sh: strip unexpected CR from lines
  watchdog: if panicking and we dumped everything, don't re-enable dumping
  watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
  watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
  watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
  kexec_core: fix the assignment to kimage->control_page
  x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
  lib/trace_readwrite.c:: replace asm-generic/io with linux/io
  nilfs2: cpfile: fix some kernel-doc warnings
  stacktrace: fix kernel-doc typo
  scripts/checkstack.pl: fix no space expression between sp and offset
  x86/kexec: fix incorrect argument passed to kexec_dprintk()
  x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
  nilfs2: add missing set_freezable() for freezable kthread
  kernel: relay: remove relay_file_splice_read dead code, doesn't work
  docs: submit-checklist: remove all of "make namespacecheck"
  ...

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Peng Zhang has done some mapletree maintainance work in the series

	'maple_tree: add mt_free_one() and mt_attr() helpers'
	'Some cleanups of maple tree'

   - In the series 'mm: use memmap_on_memory semantics for dax/kmem'
     Vishal Verma has altered the interworking between memory-hotplug
     and dax/kmem so that newly added 'device memory' can more easily
     have its memmap placed within that newly added memory.

   - Matthew Wilcox continues folio-related work (including a few fixes)
     in the patch series

	'Add folio_zero_tail() and folio_fill_tail()'
	'Make folio_start_writeback return void'
	'Fix fault handler's handling of poisoned tail pages'
	'Convert aops->error_remove_page to ->error_remove_folio'
	'Finish two folio conversions'
	'More swap folio conversions'

   - Kefeng Wang has also contributed folio-related work in the series

	'mm: cleanup and use more folio in page fault'

   - Jim Cromie has improved the kmemleak reporting output in the series
     'tweak kmemleak report format'.

   - In the series 'stackdepot: allow evicting stack traces' Andrey
     Konovalov to permits clients (in this case KASAN) to cause eviction
     of no longer needed stack traces.

   - Charan Teja Kalla has fixed some accounting issues in the page
     allocator's atomic reserve calculations in the series 'mm:
     page_alloc: fixes for high atomic reserve caluculations'.

   - Dmitry Rokosov has added to the samples/ dorectory some sample code
     for a userspace memcg event listener application. See the series
     'samples: introduce cgroup events listeners'.

   - Some mapletree maintanance work from Liam Howlett in the series
     'maple_tree: iterator state changes'.

   - Nhat Pham has improved zswap's approach to writeback in the series
     'workload-specific and memory pressure-driven zswap writeback'.

   - DAMON/DAMOS feature and maintenance work from SeongJae Park in the
     series

	'mm/damon: let users feed and tame/auto-tune DAMOS'
	'selftests/damon: add Python-written DAMON functionality tests'
	'mm/damon: misc updates for 6.8'

   - Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
     memcg: subtree stats flushing and thresholds'.

   - In the series 'Multi-size THP for anonymous memory' Ryan Roberts
     has added a runtime opt-in feature to transparent hugepages which
     improves performance by allocating larger chunks of memory during
     anonymous page faults.

   - Matthew Wilcox has also contributed some cleanup and maintenance
     work against eh buffer_head code int he series 'More buffer_head
     cleanups'.

   - Suren Baghdasaryan has done work on Andrea Arcangeli's series
     'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
     compaction algorithms to move userspace's pages around rather than
     UFFDIO_COPY'a alloc/copy/free.

   - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
     Add ksm advisor'. This is a governor which tunes KSM's scanning
     aggressiveness in response to userspace's current needs.

   - Chengming Zhou has optimized zswap's temporary working memory use
     in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.

   - Matthew Wilcox has performed some maintenance work on the writeback
     code, both code and within filesystems. The series is 'Clean up the
     writeback paths'.

   - Andrey Konovalov has optimized KASAN's handling of alloc and free
     stack traces for secondary-level allocators, in the series 'kasan:
     save mempool stack traces'.

   - Andrey also performed some KASAN maintenance work in the series
     'kasan: assorted clean-ups'.

   - David Hildenbrand has gone to town on the rmap code. Cleanups, more
     pte batching, folio conversions and more. See the series 'mm/rmap:
     interface overhaul'.

   - Kinsey Ho has contributed some maintenance work on the MGLRU code
     in the series 'mm/mglru: Kconfig cleanup'.

   - Matthew Wilcox has contributed lruvec page accounting code cleanups
     in the series 'Remove some lruvec page accounting functions'"

* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
  mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
  mm, treewide: introduce NR_PAGE_ORDERS
  selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
  selftests/mm: skip test if application doesn't has root privileges
  selftests/mm: conform test to TAP format output
  selftests: mm: hugepage-mmap: conform to TAP format output
  selftests/mm: gup_test: conform test to TAP format output
  mm/selftests: hugepage-mremap: conform test to TAP format output
  mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
  mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
  mm/memcontrol: remove __mod_lruvec_page_state()
  mm/khugepaged: use a folio more in collapse_file()
  slub: use a folio in __kmalloc_large_node
  slub: use folio APIs in free_large_kmalloc()
  slub: use alloc_pages_node() in alloc_slab_page()
  mm: remove inc/dec lruvec page state functions
  mm: ratelimit stat flush from workingset shrinker
  kasan: stop leaking stack trace handles
  mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
  mm/mglru: add dummy pmd_dirty()
  ...

Pull slab updates from Vlastimil Babka:

 - SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)

   Freezing is an operation involving double_cmpxchg() that makes a slab
   exclusive for a particular CPU. Chengming noticed that we use it also
   in situations where we are not yet installing the slab as the CPU
   slab, because freezing also indicates that the slab is not on the
   shared list. This results in redundant freeze/unfreeze operation and
   can be avoided by marking separately the shared list presence by
   reusing the PG_workingset flag.

   This approach neatly avoids the issues described in 9b1ea29b
   ("Revert "mm, slub: consider rest of partial list if acquire_slab()
   fails"") as we can now grab a slab from the shared list in a quick
   and guaranteed way without the cmpxchg_double() operation that
   amplifies the lock contention and can fail.

   As a result, lkp has reported 34.2% improvement of
   stress-ng.rawudp.ops_per_sec

 - SLAB removal and SLUB cleanups (Vlastimil Babka)

   The SLAB allocator has been deprecated since 6.5 and nobody has
   objected so far. We agreed at LSF/MM to wait until the next LTS,
   which is 6.6, so we should be good to go now.

   This doesn't yet erase all traces of SLAB outside of mm/ so some dead
   code, comments or documentation remain, and will be cleaned up
   gradually (some series are already in the works).

   Removing the choice of allocators has already allowed to simplify and
   optimize the code wiring up the kmalloc APIs to the SLUB
   implementation.

* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
  mm/slub: free KFENCE objects in slab_free_hook()
  mm/slub: handle bulk and single object freeing separately
  mm/slub: introduce __kmem_cache_free_bulk() without free hooks
  mm/slub: fix bulk alloc and free stats
  mm/slub: optimize free fast path code layout
  mm/slub: optimize alloc fastpath code layout
  mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
  mm/slab: move kmalloc() functions from slab_common.c to slub.c
  mm/slab: move kmalloc_slab() to mm/slab.h
  mm/slab: move kfree() from slab_common.c to slub.c
  mm/slab: move struct kmem_cache_node from slab.h to slub.c
  mm/slab: move memcg related functions from slab.h to slub.c
  mm/slab: move pre/post-alloc hooks from slab.h to slub.c
  mm/slab: consolidate includes in the internal mm/slab.h
  mm/slab: move the rest of slub_def.h to mm/slab.h
  mm/slab: move struct kmem_cache_cpu declaration to slub.c
  mm/slab: remove mm/slab.c and slab_def.h
  mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
  mm/slab: remove CONFIG_SLAB code from slab common code
  cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
  ...

Pull cgroup updates from Tejun Heo:

 - Yafang Shao added task_get_cgroup1() helper to enable a similar BPF
   helper so that BPF progs can be more useful on cgroup1 hierarchies.
   While cgroup1 is mostly in maintenance mode, this addition is very
   small while having an outsized usefulness for users who are still on
   cgroup1. Yafang also optimized root cgroup list access by making it
   RCU protected in the process.

 - Waiman Long optimized rstat operation leading to substantially lower
   and more consistent lock hold time while flushing the hierarchical
   statistics. As the lock can be acquired briefly in various hot paths,
   this reduction has cascading benefits.

 - Waiman also improved the quality of isolation for cpuset's isolated
   partitions. CPUs which are allocated to isolated partitions are now
   excluded from running unbound work items and cpu_is_isolated() test
   which is used by vmstat and memcg to reduce interference now includes
   cpuset isolated CPUs. While it isn't there yet, the hope is
   eventually reaching parity with the isolation level provided by the
   `isolcpus` boot param but in a dynamic manner.

* tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Move rcu_head up near the top of cgroup_root
  cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
  cgroup: Avoid false cacheline sharing of read mostly rstat_cpu
  cgroup/rstat: Optimize cgroup_rstat_updated_list()
  cgroup: Fix documentation for cpu.idle
  cgroup/cpuset: Expose cpuset.cpus.isolated
  workqueue: Move workqueue_set_unbound_cpumask() and its helpers inside CONFIG_SYSFS
  cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
  cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
  cgroup/cpuset: Keep track of CPUs in isolated partitions
  selftests/cgroup: Minor code cleanup and reorganization of test_cpuset_prs.sh
  workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask
  selftests: cgroup: Fixes a typo in a comment
  cgroup: Add a new helper for cgroup1 hierarchy
  cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
  cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
  cgroup: Make operations on the cgroup root_list RCU safe
  cgroup: Remove unnecessary list_empty()

Pull scheduler updates from Ingo Molnar:
 "Energy scheduling:

   - Consolidate how the max compute capacity is used in the scheduler
     and how we calculate the frequency for a level of utilization.

   - Rework interface between the scheduler and the schedutil governor

   - Simplify the util_est logic

  Deadline scheduler:

   - Work more towards reducing SCHED_DEADLINE starvation of low
     priority tasks (e.g., SCHED_OTHER) tasks when higher priority tasks
     monopolize CPU cycles, via the introduction of 'deadline servers'
     (nested/2-level scheduling).

     "Fair servers" to make use of this facility are not introduced yet.

  EEVDF:

   - Introduce O(1) fastpath for EEVDF task selection

  NUMA balancing:

   - Tune the NUMA-balancing vma scanning logic some more, to better
     distribute the probability of a particular vma getting scanned.

  Plus misc fixes, cleanups and updates"

* tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  sched/fair: Fix tg->load when offlining a CPU
  sched/fair: Remove unused 'next_buddy_marked' local variable in check_preempt_wakeup_fair()
  sched/fair: Use all little CPUs for CPU-bound workloads
  sched/fair: Simplify util_est
  sched/fair: Remove SCHED_FEAT(UTIL_EST_FASTUP, true)
  arm64/amu: Use capacity_ref_freq() to set AMU ratio
  cpufreq/cppc: Set the frequency used for computing the capacity
  cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}()
  energy_model: Use a fixed reference frequency
  cpufreq/schedutil: Use a fixed reference frequency
  cpufreq: Use the fixed and coherent frequency for scaling capacity
  sched/topology: Add a new arch_scale_freq_ref() method
  freezer,sched: Clean saved_state when restoring it during thaw
  sched/fair: Update min_vruntime for reweight_entity() correctly
  sched/doc: Update documentation after renames and synchronize Chinese version
  sched/cpufreq: Rework iowait boost
  sched/cpufreq: Rework schedutil governor performance estimation
  sched/pelt: Avoid underestimation of task utilization
  sched/timers: Explain why idle task schedules out on remote timer enqueue
  sched/cpuidle: Comment about timers requirements VS idle handler
  ...

Pull performance events updates from Ingo Molnar:

 - Add branch stack counters ABI extension to better capture the growing
   amount of information the PMU exposes via branch stack sampling.
   There's matching tooling support.

 - Fix race when creating the nr_addr_filters sysfs file

 - Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support

 - Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
   support

 - Misc cleanups & fixes

* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Factor out topology_gidnid_map()
  perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
  perf/x86/amd: Reject branch stack for IBS events
  perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
  perf/x86/intel/uncore: Support IIO free-running counters on GNR
  perf/x86/intel/uncore: Support Granite Rapids
  perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
  perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
  perf: Fix the nr_addr_filters fix
  perf/x86/intel/cstate: Add Grand Ridge support
  perf/x86/intel/cstate: Add Sierra Forest support
  x86/smp: Export symbol cpu_clustergroup_mask()
  perf/x86/intel/cstate: Cleanup duplicate attr_groups
  perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
  perf/x86/intel: Support branch counters logging
  perf/x86/intel: Reorganize attrs and is_visible
  perf: Add branch_sample_call_stack
  perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
  perf: Add branch stack counters

Pull irq subsystem updates from Ingo Molnar:

 - Add support for the IA55 interrupt controller on RZ/G3S SoC's

 - Update/fix the Qualcom MPM Interrupt Controller driver's register
   enumeration within the somewhat exotic "RPM Message RAM" MMIO-mapped
   shared memory region that is used for other purposes as well

 - Clean up the Xtensa built-in Programmable Interrupt Controller driver
   (xtensa-pic) a bit

* tag 'irq-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-xtensa-pic: Clean up
  irqchip/qcom-mpm: Support passing a slice of SRAM as reg space
  dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S
  irqchip/renesas-rzg2l: Add support for suspend to RAM
  irqchip/renesas-rzg2l: Add macro to retrieve TITSR register offset based on register's index
  irqchip/renesas-rzg2l: Implement restriction when writing ISCR register
  irqchip/renesas-rzg2l: Document structure members
  irqchip/renesas-rzg2l: Align struct member names to tabs
  irqchip/renesas-rzg2l: Use tabs instead of spaces

Pull timer subsystem updates from Ingo Molnar:

 - Various preparatory cleanups & enhancements of the timer-wheel code,
   in preparation for the WIP 'pull timers at expiry' timer migration
   model series (which will replace the current 'push timers at enqueue'
   migration model), by Anna-Maria Behnsen:

      - Update comments and clean up confusing variable names

      - Add debug check to warn about time travel

      - Improve/expand timer-wheel tracepoints

      - Optimize away unnecessary IPIs for deferrable timers

      - Restructure & clean up next_expiry_recalc()

      - Clean up forward_timer_base()

      - Introduce __forward_timer_base() and use it to simplify and
        micro-optimize get_next_timer_interrupt()

 - Restructure the get_next_timer_interrupt()'s idle logic for better
   readability and to enable a minor optimization.

 - Fix the nextevt calculation when no timers are pending

 - Fix the sysfs_get_uname() prototype declaration

* tag 'timers-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Fix nextevt calculation when no timers are pending
  timers: Rework idle logic
  timers: Use already existing function for forwarding timer base
  timers: Split out forward timer base functionality
  timers: Clarify check in forward_timer_base()
  timers: Move store of next event into __next_timer_interrupt()
  timers: Do not IPI for deferrable timers
  tracing/timers: Add tracepoint for tracking timer base is_idle flag
  tracing/timers: Enhance timer_start tracepoint
  tick-sched: Warn when next tick seems to be in the past
  tick/sched: Cleanup confusing variables
  tick-sched: Fix function names in comments
  time: Make sysfs_get_uname() function visible in header

Pull CPU hotplug updates from Ingo Molnar:

 - Remove unused CPU hotplug states

 - Increase the number of dynamic CPU hotplug states
   from 30 to 40, because existing drivers can exhaust
   the allocation space

* tag 'smp-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Increase the number of dynamic states
  cpu/hotplug: Remove unused CPU hotplug states

Pull generic syscall updates from Ingo Molnar:
 "Move various entry functions from kernel/entry/common.c to a header
  file, and always-inline them, to improve syscall entry performance
  on s390 by ~11%"

* tag 'core-entry-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Move syscall_enter_from_user_mode() to header file
  entry: Move enter_from_user_mode() to header file
  entry: Move exit to usermode functions to header file

Pull debugobject update from Ingo Molnar:

 - Make tracking object use more robust: it's not safe to access a
   tracking object after releasing the hashbucket lock. Create a
   persistent copy for debug printouts instead.

* tag 'core-debugobjects-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Stop accessing objects after releasing hash bucket lock

Pull objtool fixlet from Ingo Molnar:
 "Address a GCC-14 warning: there's no real bug, but indeed the calloc
  order doesn't match the prototype.

  (Side note: we should really add zalloc() for such cases)"

* tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix calloc call for new -Walloc-size

Pull locking updates from Ingo Molar:
 "Lock guards:

   - Use lock guards in the ptrace code

   - Introduce conditional guards to extend to conditional lock
     primitives like mutex_trylock()/mutex_lock_interruptible()/etc.

  lockdep:

   - Optimize 'struct lock_class' to be smaller

   - Update file patterns in MAINTAINERS

  mutexes:

   - Document mutex lifetime rules a bit more"

* tag 'locking-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked
  locking/mutex: Document that mutex_unlock() is non-atomic
  ptrace: Convert ptrace_attach() to use lock guards
  locking/lockdep: Slightly reorder 'struct lock_class' to save some memory
  MAINTAINERS: Add include/linux/lockdep*.h
  cleanup: Add conditional guard support

Commit d8b0f546 ("wire up syscalls for statmount/listmount") added
two new system calls to arch/arm64/include/asm/unistd32.h but forgot to
update the __NR_compat_syscalls number, thus causing the following build
failures:

  arch/arm64/include/asm/unistd32.h:922:24: error: array index in initializer exceeds array bounds
    922 | #define __NR_statmount 457
        |                        ^~~
  arch/arm64/kernel/sys32.c:130:34: note: in definition of macro '__SYSCALL'
    130 | #define __SYSCALL(nr, sym)      [nr] = __arm64_##sym,
        |                                  ^~

Bump up the number by two to accomodate for the new system calls added.

Fixes: d8b0f546 ("wire up syscalls for statmount/listmount")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 entry updates from Ingo Molnar:

 - Optimize common_interrupt_return()

 - Harden the return-to-user code by making a CONFIG_DEBUG_ENTRY=y check
   unconditional & moving it closer to the IRET.

* tag 'x86-entry-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Harden return-to-user
  x86/entry: Optimize common_interrupt_return()

Pull x86 core updates from Ingo Molnar:

 - Add comments about the magic behind the shadow STI
   before MWAIT in __sti_mwait().

 - Fix possible unintended timer delays caused by a race
   in mwait_idle_with_hints().

* tag 'x86-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix CPUIDLE_FLAG_IRQ_ENABLE leaking timer reprogram
  x86: Add a comment about the "magic" behind shadow sti before mwait

Pull x86 cleanups from Ingo Molnar:

 - Change global variables to local

 - Add missing kernel-doc function parameter descriptions

 - Remove unused parameter from a macro

 - Remove obsolete Kconfig entry

 - Fix comments

 - Fix typos, mostly scripted, manually reviewed

and a micro-optimization got misplaced as a cleanup:

 - Micro-optimize the asm code in secondary_startup_64_no_verify()

* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch/x86: Fix typos
  x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
  x86/docs: Remove reference to syscall trampoline in PTI
  x86/Kconfig: Remove obsolete config X86_32_SMP
  x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
  x86/mtrr: Document missing function parameters in kernel-doc
  x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()

Pull x86 build updates from Ingo Molnar:

 - Update the objdump & instruction decoder self-test code for better
   LLVM toolchain compatibility

 - Rework CONFIG_X86_PAE dependencies, for better readability and higher
   robustness.

 - Misc cleanups

* tag 'x86-build-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tools: objdump_reformat.awk: Skip bad instructions from llvm-objdump
  x86/Kconfig: Rework CONFIG_X86_PAE dependency
  x86/tools: Remove chkobjdump.awk
  x86/tools: objdump_reformat.awk: Allow for spaces
  x86/tools: objdump_reformat.awk: Ensure regex matches fwait

Pull x86 boot updates from Ingo Molnar:

 - Ignore NMIs during very early boot, to address kexec crashes

 - Remove redundant initialization in boot/string.c's strcmp()

* tag 'x86-boot-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Remove redundant initialization of the 'delta' variable in strcmp()
  x86/boot: Ignore NMIs during very early boot

Pull x86 asm updates from Ingo Molnar:
 "Replace magic numbers in GDT descriptor definitions & handling:

   - Introduce symbolic names via macros for descriptor
     types/fields/flags, and then use these symbolic names.

   - Clean up definitions a bit, such as GDT_ENTRY_INIT()

   - Fix/clean up details that became visibly inconsistent after the
     symbol-based code was introduced:

      - Unify accessed flag handling

      - Set the D/B size flag consistently & according to the HW
        specification"

* tag 'x86-asm-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Add DB flag to 32-bit percpu GDT entry
  x86/asm: Always set A (accessed) flag in GDT descriptors
  x86/asm: Replace magic numbers in GDT descriptors, script-generated change
  x86/asm: Replace magic numbers in GDT descriptors, preparations
  x86/asm: Provide new infrastructure for GDT descriptors

Pull x86 apic updates from Ingo Molnar:

 - Clean up 'struct apic':
    - Drop ::delivery_mode
    - Drop 'enum apic_delivery_modes'
    - Drop 'struct local_apic'

 - Fix comments

* tag 'x86-apic-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Remove unfinished sentence from comment
  x86/apic: Drop struct local_apic
  x86/apic: Drop enum apic_delivery_modes
  x86/apic: Drop apic::delivery_mode

Pull arm64 updates from Will Deacon:
 "CPU features:

   - Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye
     olde Thunder-X machines

   - Avoid mapping KPTI trampoline when it is not required

   - Make CPU capability API more robust during early initialisation

  Early idreg overrides:

   - Remove dependencies on core kernel helpers from the early
     command-line parsing logic in preparation for moving this code
     before the kernel is mapped

  FPsimd:

   - Restore kernel-mode fpsimd context lazily, allowing us to run
     fpsimd code sequences in the kernel with pre-emption enabled

  KBuild:

   - Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y

   - Makefile cleanups

  LPA2 prep:

   - Preparatory work for enabling the 'LPA2' extension, which will
     introduce 52-bit virtual and physical addressing even with 4KiB
     pages (including for KVM guests).

  Misc:

   - Remove dead code and fix a typo

  MM:

   - Pass NUMA node information for IRQ stack allocations

  Perf:

   - Add perf support for the Synopsys DesignWare PCIe PMU

   - Add support for event counting thresholds (FEAT_PMUv3_TH)
     introduced in Armv8.8

   - Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.

   - Minor PMU driver fixes and optimisations

  RIP VPIPT:

   - Remove what support we had for the obsolete VPIPT I-cache policy

  Selftests:

   - Improvements to the SVE and SME selftests

  Stacktrace:

   - Refactor kernel unwind logic so that it can used by BPF unwinding
     and, eventually, reliable backtracing

  Sysregs:

   - Update a bunch of register definitions based on the latest XML drop
     from Arm"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
  kselftest/arm64: Don't probe the current VL for unsupported vector types
  efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
  arm64: properly install vmlinuz.efi
  arm64/sysreg: Add missing system instruction definitions for FGT
  arm64/sysreg: Add missing system register definitions for FGT
  arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
  arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
  arm64: memory: remove duplicated include
  arm: perf: Fix ARCH=arm build with GCC
  arm64: Align boot cpucap handling with system cpucap handling
  arm64: Cleanup system cpucap handling
  MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
  drivers/perf: add DesignWare PCIe PMU driver
  PCI: Move pci_clear_and_set_dword() helper to PCI header
  PCI: Add Alibaba Vendor ID to linux/pci_ids.h
  docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
  arm64: irq: set the correct node for shadow call stack
  Revert "perf/arm_dmc620: Remove duplicate format attribute #defines"
  arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD
  arm64: fpsimd: Preserve/restore kernel mode NEON at context switch
  ...

Pull m68k updates from Geert Uytterhoeven:

  - make the NuBus bus type static and constant

  - defconfig updates

* tag 'm68k-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.7-rc1
  nubus: Make nubus_bus_type static and constant

Pull powerpc updates from Michael Ellerman:

 - Add initial support to recognise the HeXin C2000 processor.

 - Add papr-vpd and papr-sysparm character device drivers for VPD &
   sysparm retrieval, so userspace tools can be adapted to avoid doing
   raw firmware calls from userspace.

 - Sched domains optimisations for shared processor partitions on
   P9/P10.

 - A series of optimisations for KVM running as a nested HV under
   PowerVM.

 - Other small features and fixes.

Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.

* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
  powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
  powerpc/86xx: Drop unused CONFIG_MPC8610
  powerpc/powernv: Add error handling to opal_prd_range_is_valid
  selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
  powerpc/hvcall: Reorder Nestedv2 hcall opcodes
  powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
  powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
  powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
  powerpc/fsl: Fix fsl,tmu-calibration to match the schema
  powerpc/smp: Dynamically build Powerpc topology
  powerpc/smp: Avoid asym packing within thread_group of a core
  powerpc/smp: Add __ro_after_init attribute
  powerpc/smp: Disable MC domain for shared processor
  powerpc/smp: Enable Asym packing for cores on shared processor
  powerpc/sched: Cleanup vcpu_is_preempted()
  powerpc: add cpu_spec.cpu_features to vmcoreinfo
  powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
  powerpc/powernv: Add a null pointer check in opal_powercap_init()
  powerpc/powernv: Add a null pointer check in opal_event_init()
  powerpc/powernv: Add a null pointer check to scom_debug_init_one()
  ...

Pull x86 RAS updates from Borislav Petkov:

 - Convert the hw error storm handling into a finer-grained, per-bank
   solution which allows for more timely detection and reporting of
   errors

 - Start a documentation section which will hold down relevant RAS
   features description and how they should be used

 - Add new AMD error bank types

 - Slim down and remove error type descriptions from the kernel side of
   error decoding to rasdaemon which can be used from now on to decode
   hw errors on AMD

 - Mark pages containing uncorrectable errors as poison so that kdump
   can avoid them and thus not cause another panic

 - The usual cleanups and fixlets

* tag 'ras_core_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Handle Intel threshold interrupt storms
  x86/mce: Add per-bank CMCI storm mitigation
  x86/mce: Remove old CMCI storm mitigation code
  Documentation: Begin a RAS section
  x86/MCE/AMD: Add new MA_LLC, USR_DP, and USR_CP bank types
  EDAC/mce_amd: Remove SMCA Extended Error code descriptions
  x86/mce/amd, EDAC/mce_amd: Move long names to decoder module
  x86/mce/inject: Clear test status value
  x86/mce: Remove redundant check from mce_device_create()
  x86/mce: Mark fatal MCE's page as poison to avoid panic in the kdump kernel

Pull x86 cpu feature updates from Borislav Petkov:

 - Add synthetic X86_FEATURE flags for the different AMD Zen generations
   and use them everywhere instead of ad-hoc family/model checks. Drop
   an ancient AMD errata checking facility as a result

 - Fix a fragile initcall ordering in intel_epb

 - Do not issue the MFENCE+LFENCE barrier for the TSC deadline and
   X2APIC MSRs on AMD as it is not needed there

* tag 'x86_cpu_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Add X86_FEATURE_ZEN1
  x86/CPU/AMD: Drop now unused CPU erratum checking function
  x86/CPU/AMD: Get rid of amd_erratum_1485[]
  x86/CPU/AMD: Get rid of amd_erratum_400[]
  x86/CPU/AMD: Get rid of amd_erratum_383[]
  x86/CPU/AMD: Get rid of amd_erratum_1054[]
  x86/CPU/AMD: Move the DIV0 bug detection to the Zen1 init function
  x86/CPU/AMD: Move Zenbleed check to the Zen2 init function
  x86/CPU/AMD: Rename init_amd_zn() to init_amd_zen_common()
  x86/CPU/AMD: Call the spectral chicken in the Zen2 init function
  x86/CPU/AMD: Move erratum 1076 fix into the Zen1 init function
  x86/CPU/AMD: Move the Zen3 BTC_NO detection to the Zen3 init function
  x86/CPU/AMD: Carve out the erratum 1386 fix
  x86/CPU/AMD: Add ZenX generations flags
  x86/cpu/intel_epb: Don't rely on link order
  x86/barrier: Do not serialize MSR accesses on AMD

Pull x86 SEV updates from Borislav Petkov:

 - Convert the sev-guest plaform ->remove callback to return void

 - Move the SEV C-bit verification to the BSP as it needs to happen only
   once and not on every AP

* tag 'x86_sev_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt: sev-guest: Convert to platform remove callback returning void
  x86/sev: Do the C-bit verification only on the BSP

commit 23baf831 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive.  This has caused
issues with code that was not yet upstream and depended on the previous
definition.

To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.

Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.

NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.

[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
  Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull x86 paravirt updates from Borislav Petkov:

 - Replace the paravirt patching functionality using the alternatives
   infrastructure and remove the former

 - Misc other improvements

* tag 'x86_paravirt_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternative: Correct feature bit debug output
  x86/paravirt: Remove no longer needed paravirt patching code
  x86/paravirt: Switch mixed paravirt/alternative calls to alternatives
  x86/alternative: Add indirect call patching
  x86/paravirt: Move some functions and defines to alternative.c
  x86/paravirt: Introduce ALT_NOT_XEN
  x86/paravirt: Make the struct paravirt_patch_site packed
  x86/paravirt: Use relative reference for the original instruction offset

Pull misc x86 updates from Borislav Petkov:

 - Add an informational message which gets issued when IA32 emulation
   has been disabled on the cmdline

 - Clarify in detail how /proc/cpuinfo is used on x86

 - Fix a theoretical overflow in num_digits()

* tag 'x86_misc_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ia32: State that IA32 emulation is disabled
  Documentation/x86: Document what /proc/cpuinfo is for
  x86/lib: Fix overflow when counting digits

Pull x86 microcode updates from Borislav Petkov:

 - Correct minor issues after the microcode revision reporting
   sanitization

* tag 'x86_microcode_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/intel: Set new revision only after a successful update
  x86/microcode/intel: Remove redundant microcode late updated message

Pull EDAC updates from Borislav Petkov:

 - The EDAC drivers part of the effort to make the ->remove() platform
   driver callback return void

 - Add support for AMD AI accelerators

 - Add support for a number of Intel SoCs: Alder Lake-N, Raptor Lake-P,
   Meteor Lake-{P,PS}

 - Random fixes and cleanups all over the place

* tag 'edac_updates_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (39 commits)
  EDAC/skx_common: Filter out the invalid address
  EDAC, pnd2: Sort headers alphabetically
  EDAC, pnd2: Correct misleading error message in mk_region_mask()
  EDAC, pnd2: Apply bit macros and helpers where it makes sense
  EDAC, pnd2: Replace custom definition by one from sizes.h
  EDAC/igen6: Add Intel Meteor Lake-P SoCs support
  EDAC/igen6: Add Intel Meteor Lake-PS SoCs support
  EDAC/igen6: Add Intel Raptor Lake-P SoCs support
  EDAC/igen6: Add Intel Alder Lake-N SoCs support
  EDAC/igen6: Make get_mchbar() helper function
  EDAC/amd64: Add support for family 0x19, models 0x90-9f devices
  EDAC/mc: Add support for HBM3 memory type
  EDAC/{sb,i7core}_edac: Do not use a plain integer for a NULL pointer
  EDAC/armada_xp: Explicitly include correct DT includes
  EDAC/pci_sysfs: Use PCI_HEADER_TYPE_MASK instead of literals
  EDAC/thunderx: Fix possible out-of-bounds string access
  EDAC/fsl_ddr: Convert to platform remove callback returning void
  EDAC/zynqmp: Convert to platform remove callback returning void
  EDAC/xgene: Convert to platform remove callback returning void
  EDAC/ti: Convert to platform remove callback returning void
  ...

Pull vfs iov_iter cleanups from Christian Brauner:
 "This contains a minor cleanup. The patches drop an unused argument
  from import_single_range() allowing to replace import_single_range()
  with import_ubuf() and dropping import_single_range() completely"

* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  iov_iter: replace import_single_range() with import_ubuf()
  iov_iter: remove unused 'iov' argument from import_single_range()

Pull vfs cachefiles updates from Christian Brauner:
 "This contains improvements for on-demand cachefiles.

  If the daemon crashes and the on-demand cachefiles fd is unexpectedly
  closed in-flight requests and subsequent read operations associated
  with the fd will fail with EIO. This causes issues in various
  scenarios as this failure is currently unrecoverable.

  The work contained in this pull request introduces a failover mode and
  enables the daemon to recover in-flight requested-related objects. A
  restarted daemon will be able to process requests as usual.

  This requires that in-flight requests are stored during daemon crash
  or while the daemon is offline. In addition, a handle to
  /dev/cachefiles needs to be stored.

  This can be done by e.g., systemd's fdstore (cf. [1]) which enables
  the restarted daemon to recover state.

  Three new states are introduced in this patchset:

   (1) CLOSE
       Object is closed by the daemon.

   (2) OPEN
       Object is open and ready for processing. IOW, the open request
       has been handled successfully.

   (3) REOPENING
       Object has been previously closed and is now reopened due to a
       read request.

  A restarted daemon can recover the /dev/cachefiles fd from systemd's
  fdstore and writes "restore" to the device. This causes the object
  state to be reset from CLOSE to REOPENING and reinitializes the
  object.

  The daemon may now handle the open request. Any in-flight operations
  are restored and handled avoiding interruptions for users"

Link: https://systemd.io/FILE_DESCRIPTOR_STORE [1]

* tag 'vfs-6.8.cachefiles' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  cachefiles: add restore command to recover inflight ondemand read requests
  cachefiles: narrow the scope of triggering EPOLLIN events in ondemand mode
  cachefiles: resend an open request if the read request's object is closed
  cachefiles: extract ondemand info field from cachefiles_object
  cachefiles: introduce object ondemand state

Pull vfs rw updates from Christian Brauner:
 "This contains updates from Amir for read-write backing file helpers
  for stacking filesystems such as overlayfs:

   - Fanotify is currently in the process of introducing pre content
     events. Roughly, a new permission event will be added indicating
     that it is safe to write to the file being accessed. These events
     are used by hierarchical storage managers to e.g., fill the content
     of files on first access.

     During that work we noticed that our current permission checking is
     inconsistent in rw_verify_area() and remap_verify_area().
     Especially in the splice code permission checking is done multiple
     times. For example, one time for the whole range and then again for
     partial ranges inside the iterator.

     In addition, we mostly do permission checking before we call
     file_start_write() except for a few places where we call it after.
     For pre-content events we need such permission checking to be done
     before file_start_write(). So this is a nice reason to clean this
     all up.

     After this series, all permission checking is done before
     file_start_write().

     As part of this cleanup we also massaged the splice code a bit. We
     got rid of a few helpers because we are alredy drowning in special
     read-write helpers. We also cleaned up the return types for splice
     helpers.

   - Introduce generic read-write helpers for backing files. This lifts
     some overlayfs code to common code so it can be used by the FUSE
     passthrough work coming in over the next cycles. Make Amir and
     Miklos the maintainers for this new subsystem of the vfs"

* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
  fs: fix __sb_write_started() kerneldoc formatting
  fs: factor out backing_file_mmap() helper
  fs: factor out backing_file_splice_{read,write}() helpers
  fs: factor out backing_file_{read,write}_iter() helpers
  fs: prepare for stackable filesystems backing file helpers
  fsnotify: optionally pass access range in file permission hooks
  fsnotify: assert that file_start_write() is not held in permission hooks
  fsnotify: split fsnotify_perm() into two hooks
  fs: use splice_copy_file_range() inline helper
  splice: return type ssize_t from all helpers
  fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
  fs: move file_start_write() into direct_splice_actor()
  fs: fork splice_file_range() from do_splice_direct()
  fs: create {sb,file}_write_not_started() helpers
  fs: create file_write_started() helper
  fs: create __sb_write_started() helper
  fs: move kiocb_start_write() into vfs_iocb_iter_write()
  fs: move permission hook out of do_iter_read()
  fs: move permission hook out of do_iter_write()
  fs: move file_start_write() into vfs_iter_write()
  ...

Pull vfs mount updates from Christian Brauner:
 "This contains the work to retrieve detailed information about mounts
  via two new system calls. This is hopefully the beginning of the end
  of the saga that started with fsinfo() years ago.

  The LWN articles in [1] and [2] can serve as a summary so we can avoid
  rehashing everything here.

  At LSFMM in May 2022 we got into a room and agreed on what we want to
  do about fsinfo(). Basically, split it into pieces. This is the first
  part of that agreement. Specifically, it is concerned with retrieving
  information about mounts. So this only concerns the mount information
  retrieval, not the mount table change notification, or the extended
  filesystem specific mount option work. That is separate work.

  Currently mounts have a 32bit id. Mount ids are already in heavy use
  by libmount and other low-level userspace but they can't be relied
  upon because they're recycled very quickly. We agreed that mounts
  should carry a unique 64bit id by which they can be referenced
  directly. This is now implemented as part of this work.

  The new 64bit mount id is exposed in statx() through the new
  STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
  returned. If it is raised and the kernel supports the new 64bit mount
  id the flag is raised in the result mask and the new 64bit mount id is
  returned. New and old mount ids do not overlap so they cannot be
  conflated.

  Two new system calls are introduced that operate on the 64bit mount
  id: statmount() and listmount(). A summary of the api and usage can be
  found on LWN as well (cf. [3]) but of course, I'll provide a summary
  here as well.

  Both system calls rely on struct mnt_id_req. Which is the request
  struct used to pass the 64bit mount id identifying the mount to
  operate on. It is extensible to allow for the addition of new
  parameters and for future use in other apis that make use of mount
  ids.

  statmount() mimicks the semantics of statx() and exposes a set flags
  that userspace may raise in mnt_id_req to request specific information
  to be retrieved. A statmount() call returns a struct statmount filled
  in with information about the requested mount. Supported requests are
  indicated by raising the request flag passed in struct mnt_id_req in
  the @mask argument in struct statmount.

  Currently we do support:

   - STATMOUNT_SB_BASIC:
     Basic filesystem info

   - STATMOUNT_MNT_BASIC
     Mount information (mount id, parent mount id, mount attributes etc)

   - STATMOUNT_PROPAGATE_FROM
     Propagation from what mount in current namespace

   - STATMOUNT_MNT_ROOT
     Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)

   - STATMOUNT_MNT_POINT
     Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)

   - STATMOUNT_FS_TYPE
     Name of the filesystem type as the magic number isn't enough due to submounts

  The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
  are appended to the end of the struct. Userspace can use the offsets
  in @fs_type, @mnt_root, and @mnt_point to reference those strings
  easily.

  The struct statmount reserves quite a bit of space currently for
  future extensibility. This isn't really a problem and if this bothers
  us we can just send a follow-up pull request during this cycle.

  listmount() is given a 64bit mount id via mnt_id_req just as
  statmount(). It takes a buffer and a size to return an array of the
  64bit ids of the child mounts of the requested mount. Userspace can
  thus choose to either retrieve child mounts for a mount in batches or
  iterate through the child mounts. For most use-cases it will be
  sufficient to just leave space for a few child mounts. But for big
  mount tables having an iterator is really helpful. Iterating through a
  mount table works by setting @param in mnt_id_req to the mount id of
  the last child mount retrieved in the previous listmount() call"

Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]

* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  add selftest for statmount/listmount
  fs: keep struct mnt_id_req extensible
  wire up syscalls for statmount/listmount
  add listmount(2) syscall
  statmount: simplify string option retrieval
  statmount: simplify numeric option retrieval
  add statmount(2) syscall
  namespace: extract show_path() helper
  mounts: keep list of mounts in an rbtree
  add unique mount ID

Pull vfs super updates from Christian Brauner:
 "This contains the super work for this cycle including the long-awaited
  series by Jan to make it possible to prevent writing to mounted block
  devices:

   - Writing to mounted devices is dangerous and can lead to filesystem
     corruption as well as crashes. Furthermore syzbot comes with more
     and more involved examples how to corrupt block device under a
     mounted filesystem leading to kernel crashes and reports we can do
     nothing about. Add tracking of writers to each block device and a
     kernel cmdline argument which controls whether other writeable
     opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
     allowed.

     Note that this effectively only prevents modification of the
     particular block device's page cache by other writers. The actual
     device content can still be modified by other means - e.g. by
     issuing direct scsi commands, by doing writes through devices lower
     in the storage stack (e.g. in case loop devices, DM, or MD are
     involved) etc. But blocking direct modifications of the block
     device page cache is enough to give filesystems a chance to perform
     data validation when loading data from the underlying storage and
     thus prevent kernel crashes.

     Syzbot can use this cmdline argument option to avoid uninteresting
     crashes. Also users whose userspace setup does not need writing to
     mounted block devices can set this option for hardening. We expect
     that this will be interesting to quite a few workloads.

     Btrfs is currently opted out of this because they still haven't
     merged patches we require for this to work from three kernel
     releases ago.

   - Reimplement block device freezing and thawing as holder operations
     on the block device.

     This allows us to extend block device freezing to all devices
     associated with a superblock and not just the main device. It also
     allows us to remove get_active_super() and thus another function
     that scans the global list of superblocks.

     Freezing via additional block devices only works if the filesystem
     chooses to use @fs_holder_ops for these additional devices as well.
     That currently only includes ext4 and xfs.

     Earlier releases switched get_tree_bdev() and mount_bdev() to use
     @fs_holder_ops. The remaining nilfs2 open-coded version of
     mount_bdev() has been converted to rely on @fs_holder_ops as well.
     So block device freezing for the main block device will continue to
     work as before.

     There should be no regressions in functionality. The only special
     case is btrfs where block device freezing for the main block device
     never worked because sb->s_bdev isn't set. Block device freezing
     for btrfs can be fixed once they can switch to @fs_holder_ops but
     that can happen whenever they're ready"

* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
  block: Fix a memory leak in bdev_open_by_dev()
  super: don't bother with WARN_ON_ONCE()
  super: massage wait event mechanism
  ext4: Block writes to journal device
  xfs: Block writes to log device
  fs: Block writes to mounted block devices
  btrfs: Do not restrict writes to btrfs devices
  block: Add config option to not allow writing to mounted devices
  block: Remove blkdev_get_by_*() functions
  bcachefs: Convert to bdev_open_by_path()
  fs: handle freezing from multiple devices
  fs: remove dead check
  nilfs2: simplify device handling
  fs: streamline thaw_super_locked
  ext4: simplify device handling
  xfs: simplify device handling
  fs: simplify setup_bdev_super() calls
  blkdev: comment fs_holder_ops
  porting: document block device freeze and thaw changes
  fs: remove unused helper
  ...

Pull misc vfs updates from Christian Brauner:
 "This contains the usual miscellaneous features, cleanups, and fixes
  for vfs and individual fses.

  Features:

   - Add Jan Kara as VFS reviewer

   - Show correct device and inode numbers in proc/<pid>/maps for vma
     files on stacked filesystems. This is now easily doable thanks to
     the backing file work from the last cycles. This comes with
     selftests

  Cleanups:

   - Remove a redundant might_sleep() from wait_on_inode()

   - Initialize pointer with NULL, not 0

   - Clarify comment on access_override_creds()

   - Rework and simplify eventfd_signal() and eventfd_signal_mask()
     helpers

   - Process aio completions in batches to avoid needless wakeups

   - Completely decouple struct mnt_idmap from namespaces. We now only
     keep the actual idmapping around and don't stash references to
     namespaces

   - Reformat maintainer entries to indicate that a given subsystem
     belongs to fs/

   - Simplify fput() for files that were never opened

   - Get rid of various pointless file helpers

   - Rename various file helpers

   - Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
     last cycle

   - Make relatime_need_update() return bool

   - Use GFP_KERNEL instead of GFP_USER when allocating superblocks

   - Replace deprecated ida_simple_*() calls with their current ida_*()
     counterparts

  Fixes:

   - Fix comments on user namespace id mapping helpers. They aren't
     kernel doc comments so they shouldn't be using /**

   - s/Retuns/Returns/g in various places

   - Add missing parameter documentation on can_move_mount_beneath()

   - Rename i_mapping->private_data to i_mapping->i_private_data

   - Fix a false-positive lockdep warning in pipe_write() for watch
     queues

   - Improve __fget_files_rcu() code generation to improve performance

   - Only notify writer that pipe resizing has finished after setting
     pipe->max_usage otherwise writers are never notified that the pipe
     has been resized and hang

   - Fix some kernel docs in hfsplus

   - s/passs/pass/g in various places

   - Fix kernel docs in ntfs

   - Fix kcalloc() arguments order reported by gcc 14

   - Fix uninitialized value in reiserfs"

* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
  reiserfs: fix uninit-value in comp_keys
  watch_queue: fix kcalloc() arguments order
  ntfs: dir.c: fix kernel-doc function parameter warnings
  fs: fix doc comment typo fs tree wide
  selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
  fs/proc: show correct device and inode numbers in /proc/pid/maps
  eventfd: Remove usage of the deprecated ida_simple_xx() API
  fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
  fs/hfsplus: wrapper.c: fix kernel-doc warnings
  fs: add Jan Kara as reviewer
  fs/inode: Make relatime_need_update return bool
  pipe: wakeup wr_wait after setting max_usage
  file: remove __receive_fd()
  file: stop exposing receive_fd_user()
  fs: replace f_rcuhead with f_task_work
  file: remove pointless wrapper
  file: s/close_fd_get_file()/file_close_fd()/g
  Improve __fget_files_rcu() code generation (and thus __fget_light())
  file: massage cleanup of files that failed to open
  fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
  ...