This patch does the following clean ups :

1) All undescribed fields of a register are now treated as 'strict'
   with a safe value of 0. Hence we could leave an empty table for
   describing registers which are RAZ.

2) ID_AA64DFR1_EL1 is RAZ and should use the table for RAZ register.

3) ftr_generic32 is used to represent a register with a 32bit feature
   value. Rename this to ftr_singl32 to make it more obvious. Since
   we don't have a 64bit singe feature register, kill ftr_generic.

Based on a patch by Mark Rutland.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We currently have some RAZ fields described explicitly in our
arm64_ftr_bits arrays. These are inconsistently commented, grouped,
and/or applied, and maintaining these is error-prone.

Luckily, we don't need these at all. We'll never need to inspect RAZ
fields to determine feature support, and init_cpu_ftr_reg() will ensure
that any bits without a corresponding arm64_ftr_bits entry are treated
as RES0 with strict matching requirements. In check_update_ftr_reg()
we'll then compare these bits from the relevant cpuinfo_arm64
structures, and need not store them in a arm64_ftr_reg.

This patch removes the unnecessary arm64_ftr_bits entries for RES0 bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Any fields not defined in an arm64_ftr_bits entry are propagated to the
system-wide register value in init_cpu_ftr_reg(), and while we require
that these strictly match for the sanity checks, we don't update them in
update_cpu_ftr_reg().

Generally, the lack of an arm64_ftr_bits entry indicates that the bits
are currently RES0 (as is the case for the upper 32 bits of all
supposedly 32-bit registers).

A better default would be to use zero for the system-wide value of
unallocated bits, making all register checking consistent, and allowing
for subsequent simplifications to the arm64_ftr_bits arrays.

This patch updates init_cpu_ftr_reg() to treat unallocated bits as RES0
for the purpose of the system-wide safe value. These bits will still be
sanity checked with strict match requirements, as is currently the case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The statistical profiling extension (SPE) is an optional feature of
ARMv8.1 and is unlikely to be supported by all of the CPUs in a
heterogeneous system.

This patch updates the cpufeature checks so that such systems are not
tainted as unsupported.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Perf already supports multiple PMU instances for heterogeneous systems,
so there's no need to be strict in the cpufeature checking, particularly
as the PMU extension is optional in the architecture.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Since its introduction, the UAO enable call was broken, and useless.
commit 2a6dcb2b ("arm64: cpufeature: Schedule enable() calls instead
of calling them via IPI"), fixed the framework so that these calls
are scheduled, so that they can modify PSTATE.

Now it is just useless. Remove it. UAO is enabled by the code patching
which causes get_user() and friends to use the 'ldtr' family of
instructions. This relies on the PSTATE.UAO bit being set to match
addr_limit, which we do in uao_thread_switch() called via __switch_to().

All that is needed to enable UAO is patch the code, and call schedule().
__apply_alternatives_multi_stop() calls stop_machine() when it modifies
the kernel text to enable the alternatives, (including the UAO code in
uao_thread_switch()). Once stop_machine() has finished __switch_to() is
called to reschedule the original task, this causes PSTATE.UAO to be set
appropriately. An explicit enable() call is not needed.
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>

In commit 23c8a500 ("arm64: kernel: use ordinary return/argument
register for el2_setup()"), we stopped using w20 as a global stash of
the boot mode flag, and instead pass this around in w0 as a function
parameter.

Unfortunately, we missed a couple of comments, which still refer to the
old convention of using w20/x20.

This patch fixes up the comments to describe the code as it currently
works.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

A few printk calls in arm64 omit a trailing newline, even though there
is no subsequent KERN_CONT printk associated with them, and we actually
want a newline.

This can result in unrelated lines being appended, rather than appearing
on a new line. Additionally, timestamp prefixes may appear in-line. This
makes the logs harder to read than necessary.

Avoid this by adding a trailing newline.

These were found with a shortlist generated by:

$ git grep 'pr\(intk\|_.*\)(.*)' -- arch/arm64 | grep -v pr_fmt | grep -v '\\n"'
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
CC: James Morse <james.morse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Function graph tracer shows negative time (wrap around) when tracing
__switch_to if the nosleep-time trace option is enabled.

Time compensation for nosleep-time is done by an ftrace probe on
sched_switch. This doesn't work well for the following events (with
letters representing timestamps):
A - sched switch probe called for task T switch out
B - __switch_to calltime is recorded
C - sched_switch probe called for task T switch in
D - __switch_to rettime is recorded

If C - A > D - B, then we end up over compensating for the time spent in
__switch_to giving rise to negative times in the trace output.

On x86, __switch_to is not traced if function graph tracer is enabled.
Do the same for arm64 as well.

Cc: Todd Kjos <tkjos@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

Pull char/misc fixes from Greg KH:
 "Here are a few small char/misc driver fixes for 4.10-rc3.

  Two MEI driver fixes, and three NVMEM patches for reported issues, and
  a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
  been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hyper-v: Add myself as additional MAINTAINER
  nvmem: fix nvmem_cell_read() return type doc
  nvmem: imx-ocotp: Fix wrong register size
  nvmem: qfprom: Allow single byte accesses for read/write
  mei: move write cb to completion on credentials failures
  mei: bus: fix mei_cldev_enable KDoc

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 4.10-rc3.

  Most of these are minor IIO fixes of reported issues, along with one
  network driver fix to resolve an issue. And a MAINTAINERS update with
  a new mailing list. All of these, except the MAINTAINERS file update,
  have been in linux-next with no reported issues (the MAINTAINERS patch
  happened on Friday...)"

* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add greybus subsystem mailing list
  staging: octeon: Call SET_NETDEV_DEV()
  iio: accel: st_accel: fix LIS3LV02 reading and scaling
  iio: common: st_sensors: fix channel data parsing
  iio: max44000: correct value in illuminance_integration_time_available
  iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  iio: bmi160: Fix time needed to sleep after command execution
  iio: 104-quad-8: Fix active level mismatch for the preset enable option
  iio: 104-quad-8: Fix off-by-one errors when addressing IOR
  iio: 104-quad-8: Fix index control configuration

Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b46879 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2 ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kbuild fix from Michal Marek:
 "The asm-prototypes.h file added in the last merge window results in
  invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
  segfaults.

  This pull request fixes the header, the genksyms fix is in my kbuild
  branch for 4.11"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  asm-prototypes: Clear any CPP defines before declaring the functions

The Greybus driver subsystem has a mailing list, so list it in the
MAINTAINERS file so that people know to send patches there as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull sound fixes from Takashi Iwai:
 "Nothing particular stands out, only a few small fixes for USB-audio,
  HD-audio and Firewire. The USB-audio fix is the respin of the previous
  race fix after a revert due to the regression"

* tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  Revert "ALSA: firewire-lib: change structure member with proper type"
  ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
  ALSA: usb-audio: Fix irq/process data synchronization
  ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
  ALSA: hda - Fix up GPIO for ASUS ROG Ranger
  ALSA: firewire-lib: change structure member with proper type
  ALSA: firewire-tascam: Fix to handle error from initialization of stream data
  ALSA: fireworks: fix asymmetric API call at unit removal

Pull clk fixes from Stephen Boyd:
 "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders
  that don't turn all the clks on and another fix for stm32f4 SoCs where
  we have multiple drivers attaching to the same DT node"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method
  clk: renesas: mstp: Support 8-bit registers for r7s72100

Merge tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix temp1_max_alarm attribute in lm90 driver"

* tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (lm90) fix temp1_max_alarm attribute

Pull KVM fixes from Radim Krčmář:
 "MIPS:
   - fix host kernel crashes when receiving a signal with 64-bit
     userspace

   - flush instruction cache on all vcpus after generating entry code

     (both for stable)

  x86:
   - fix NULL dereference in MMU caused by SMM transitions (for stable)

   - correct guest instruction pointer after emulating some VMX errors

   - minor cleanup"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: remove duplicated declaration
  KVM: MIPS: Flush KVM entry code from icache globally
  KVM: MIPS: Don't clobber CP0_Status.UX
  KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
  KVM: nVMX: fix instruction skipping during emulated vm-entry

Pull arm64 fixes from Catalin Marinas:

 - re-introduce the arm64 get_current() optimisation

 - KERN_CONT fallout fix in show_pte()

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: restore get_current() optimisation
  arm64: mm: fix show_pte KERN_CONT fallout

Pull VFIO fixes from Alex Williamson:
 - Add mtty sample driver properly into build system (Alex Williamson)
 - Restore type1 mapping performance after mdev (Alex Williamson)
 - Fix mdev device race (Alex Williamson)
 - Cleanups to the mdev ABI used by vendor drivers (Alex Williamson)
 - Build fix for old compilers (Arnd Bergmann)
 - Fix sample driver error path (Dan Carpenter)
 - Handle pci_iomap() error (Arvind Yadav)
 - Fix mdev ioctl return type (Paul Gortmaker)

* tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfio:
  vfio-mdev: fix non-standard ioctl return val causing i386 build fail
  vfio-pci: Handle error from pci_iomap
  vfio-mdev: fix some error codes in the sample code
  vfio-pci: use 32-bit comparisons for register address for gcc-4.5
  vfio-mdev: Make mdev_device private and abstract interfaces
  vfio-mdev: Make mdev_parent private
  vfio-mdev: de-polute the namespace, rename parent_device & parent_ops
  vfio-mdev: Fix remove race
  vfio/type1: Restore mapping performance with mdev support
  vfio-mdev: Fix mtty sample driver building

Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb fixes from Konrad Rzeszutek Wilk:
 "This has one fix to make i915 work when using Xen SWIOTLB, and a
  feature from Geert to aid in debugging of devices that can't do DMA
  outside the 32-bit address space.

  The feature from Geert is on top of v4.10 merge window commit
  (specifically you pulling my previous branch), as his changes were
  dependent on the Documentation/ movement patches.

  I figured it would just easier than me trying than to cherry-pick the
  Documentation patches to satisfy git.

  The patches have been soaking since 12/20, albeit I updated the last
  patch due to linux-next catching an compiler error and adding an
  Tested-and-Reported-by tag"

* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Export swiotlb_max_segment to users
  swiotlb: Add swiotlb=noforce debug option
  swiotlb: Convert swiotlb_force from int to enum
  x86, swiotlb: Simplify pci_swiotlb_detect_override()

Pull IOMMU fixes from Joerg Roedel:
 "Three fixes queued up:

   - fix an issue with command buffer overflow handling in the AMD IOMMU
     driver

   - add an additional context entry flush to the Intel VT-d driver to
     make sure any old context entry from kdump copying is flushed out
     of the cache

   - correct the encoding of the PASID table size in the Intel VT-d
     driver"

* tag 'iommu-fixes-v4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix the left value check of cmd buffer
  iommu/vt-d: Fix pasid table size encoding
  iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped

Pull ACPI fixes from Rafael Wysocki:
 "These fix a device enumeration problem related to _ADR matching and an
  IOMMU initialization issue related to the DMAR table missing, remove
  an excessive function call from the core ACPI code, update an error
  message in the ACPI WDAT watchdog driver and add a way to work around
  problems with unhandled GPE notifications.

  Specifics:

   - Fix a device enumeration issue leading to incorrect associations
     between ACPI device objects and platform device objects
     representing physical devices if the given device object has both
     _ADR and _HID (Rafael Wysocki).

   - Avoid passing NULL to acpi_put_table() during IOMMU initialization
     which triggers a (rightful) warning from ACPICA (Rafael Wysocki).

   - Drop an excessive call to acpi_dma_deconfigure() from the core code
     that binds ACPI device objects to device objects representing
     physical devices (Lorenzo Pieralisi).

   - Update an error message in the ACPI WDAT watchdog driver to make it
     provide more useful information (Mika Westerberg).

   - Add a mechanism to work around issues with unhandled GPE
     notifications that occur during system initialization and cannot be
     prevented by means of sysfs (Lv Zheng)"

* tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / DMAR: Avoid passing NULL to acpi_put_table()
  ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
  ACPI / watchdog: Print out error number when device creation fails
  ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding
  ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one()

Pull power management fixes from Rafael Wysocki:
 "These fix a few issues in the intel_pstate driver, a documetation
  issue, a false-positive compiler warning in the generic power domains
  framework and two problems in the devfreq subsystem. They also update
  the MAINTAINERS entry for devfreq and add a new "compatible" string to
  the generic cpufreq-dt driver.

  Specifics:

   - Fix a few intel_pstate driver issues: add missing locking it two
     places, avoid exposing a useless debugfs interface and keep the
     attribute values in sysfs in sync (Rafael Wysocki).

   - Drop confusing kernel-doc references related to power management
     and ACPI from the driver API manual (Rafael Wysocki).

   - Make a false-positive compiler warning in the generic power domains
     framework go away (Augusto Mecking Caringi).

   - Fix two initialization issues in the devfreq subsystem and update
     the MAINTAINERS entry for it (Chanwoo Choi).

   - Add a new "compatible" string for APM X-Gene 2 to the generic DT
     cpufreq driver (Hoan Tran)"

* tag 'pm-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: dt: Add support for APM X-Gene 2
  PM / devfreq: exynos-bus: Fix the wrong return value
  PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
  MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support
  PM / docs: Drop confusing kernel-doc references from infrastructure.rst
  PM / domains: Fix 'may be used uninitialized' build warning
  cpufreq: intel_pstate: Always keep all limits settings in sync
  cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()
  cpufreq: intel_pstate: Use locking in intel_pstate_resume()
  cpufreq: intel_pstate: Do not expose PID parameters in passive mode

So they can figure out what is the optimal number of pages
that can be contingously stitched together without fear of
bounce buffer.

We also expose an mechanism for sub-users of SWIOTLB API, such
as Xen-SWIOTLB to set the max segment value. And lastly
if swiotlb=force is set (which mandates we bounce buffer everything)
we set max_segment so at least we can bounce buffer one 4K page
instead of a giant 512KB one for which we may not have space.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-and-Tested-by: Juergen Gross <jgross@suse.com>

* acpi-scan:
  ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
  ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one()

* acpi-sysfs:
  ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding

* acpi-wdat:
  ACPI / watchdog: Print out error number when device creation fails

* acpi-tables:
  ACPI / DMAR: Avoid passing NULL to acpi_put_table()

* pm-domains:
  PM / domains: Fix 'may be used uninitialized' build warning

* pm-docs:
  PM / docs: Drop confusing kernel-doc references from infrastructure.rst

* pm-devfreq:
  PM / devfreq: exynos-bus: Fix the wrong return value
  PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
  MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support

* pm-cpufreq:
  cpufreq: dt: Add support for APM X-Gene 2
  cpufreq: intel_pstate: Always keep all limits settings in sync
  cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()
  cpufreq: intel_pstate: Use locking in intel_pstate_resume()
  cpufreq: intel_pstate: Do not expose PID parameters in passive mode

Merge tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Just two small fixes for platform drivers x86:

   - use brightness_set_blocking for LED-setting callbacks on Fujitsu
     laptops

   - fix surface3_button build errors"

* tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: fujitsu-laptop: use brightness_set_blocking for LED-setting callbacks
  platform/x86: fix surface3_button build errors

Pull audit fixes from Paul Moore:
 "Two small fixes relating to audit's use of fsnotify.

  The first patch plugs a leak and the second fixes some lock
  shenanigans. The patches are small and I banged on this for an
  afternoon with our testsuite and didn't see anything odd"

* 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit:
  audit: Fix sleep in atomic
  fsnotify: Remove fsnotify_duplicate_mark()

Pull i915 drm fixes from Jani Nikula:
 "Here's a bunch of drm/i915 fixes for v4.10-rc3. It includes GVT-g
  fixes.

  My new year's resolution is to start using signed tags for pulls. If
  that feels like a déjà vu, it's ((new year's) resolution), not (new
  (year's resolution))"

[ Taking this directly from Jani because Dave Airlie is only partially
  connected right now.  - Linus ]

* tag 'drm-intel-fixes-2017-01-05' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Prevent timeline updates whilst performing reset
  drm/i915: Silence allocation failure during sg_trim()
  drm/i915: Don't clflush before release phys object
  drm/i915: Fix oops in overlay due to frontbuffer tracking
  drm/i915: Fix oopses in the overlay code due to i915_gem_active stuff
  drm/i915: Initialize overlay->last_flip properly
  drm/i915: Move the min_pixclk[] handling to the end of readout
  drm/i915: Force VDD off on the new power seqeuencer before starting to use it
  drm/i915/gvt: fix typo in cfg_space range check
  drm/i915/gvt: fix an issue in emulating cfg space PCI_COMMAND
  drm/i915/gvt/kvmgt: trival: code cleanup
  drm/i915/gvt/kvmgt: prevent double-release of vgpu
  drm/i915/gvt/kvmgt: check returned slot for gfn
  drm/i915/gvt/kvmgt: dereference the pointer within lock
  drm/i915/gvt: reset the GGTT entry when vGPU created
  drm/i915/gvt: fix an error in opregion handling

When checking a new device's descriptors, the USB core does not check
for duplicate endpoint addresses.  This can cause a problem when the
sysfs files for those endpoints are created; trying to create multiple
files with the same name will provoke a WARNING:

WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0
sysfs: cannot create duplicate filename
'/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05'
Kernel panic - not syncing: panic_on_warn set ...

CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
 ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c
 ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510
 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51
 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179
 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542
 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565
 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30
 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59
 [<     inline     >] create_dir lib/kobject.c:71
 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229
 [<     inline     >] kobject_add_varg lib/kobject.c:366
 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411
 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088
 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206
 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195
 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030
 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937
 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172
 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263

This patch prevents the problem by checking for duplicate endpoint
addresses during enumeration and skipping any duplicates.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull pin control fixes from Linus Walleij:
 "Three small pin control fixes for the v4.10 series. Very little to say
  about them, just driver fixes.

   - one fix to the AMD pinctrl ACPI glue

   - fix requests on the Meson driver

   - fix bitfield widths on Samsungs Exynos 5433"

* tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433
  pinctrl: meson: fix gpio request disabling other modes
  pinctrl/amd: Set the level based on ACPI tables

The gpiod_get* function family does not want the -gpio suffix.
Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional.
The descriptor based APIs handle active high/low automatically.
The vbus-gpios are output, request enable while getting the gpio.
Don't try to get any vbus-gpios for ports outside num-ports.

WTF? Big sigh.

Fixes: 054d4b7b ("usb: ohci-at91: Use descriptor-based gpio APIs")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a rather large set of bugfixes, as we just returned from the
  Christmas break. Most of these are relatively unimportant fixes for
  regressions introduced during the merge window, and about half of the
  changes are for mach-omap2.

  A couple of patches are just cleanups and dead code removal that I
  would not normally have considered for merging after -rc2, but I
  decided to take them along with the fixes this time.

  Notable fixes include:

   - removing the skeleton.dtsi include broke a number of machines, and
     we have to put empty /chosen nodes back to be able to pass kernel
     command lines as before

   - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as
     it had been for no good reason for a long time"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
  drivers: psci: annotate timer on stack to silence odebug messages
  ARM64: defconfig: enable DRM_MESON as module
  ARM64: dts: meson-gx: Add Graphic Controller nodes
  ARM64: dts: meson-gxl: fix GPIO include
  ARM: dts: imx6: Disable "weim" node in the dtsi files
  ARM: dts: qcom: apq8064: Add missing scm clock
  ARM: davinci: da8xx: Fix sleeping function called from invalid context
  ARM: davinci: Make __clk_{enable,disable} functions public
  ARM: davinci: da850: don't add emac clock to lookup table twice
  ARM: davinci: da850: fix infinite loop in clk_set_rate()
  ARM: i.MX: remove map_io callback
  ARM: dts: vf610-zii-dev-rev-b: Add missing newline
  ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
  ARM: dts: imx31: fix AVIC base address
  ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
  arm64: dts: vexpress: Support GICC_DIR operations
  ARM: dts: vexpress: Support GICC_DIR operations
  firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
  arm64: dts: msm8996: Add required memory carveouts
  ...

Pull xen fixes and cleanups from Juergen Gross:

 - small fixes for xenbus driver

 - one fix for xen dom0 boot on huge system

 - small cleanups

* tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Xen: ARM: Zero reserved fields of xatp before making hypervisor call
  xen: events: Replace BUG() with BUG_ON()
  xen: remove stale xs_input_avail() from header
  xen: return xenstore command failures via response instead of rc
  xen: xenbus driver must not accept invalid transaction ids
  xen/evtchn: use rb_entry()
  xen/setup: Don't relocate p2m over existing one

Update the Hyper-V MAINTAINERS to include myself.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>