Pull second batch of KVM changes from Paolo Bonzini:
 "This mostly includes the PPC changes for 4.1, which this time cover
  Book3S HV only (debugging aids, minor performance improvements and
  some cleanups).  But there are also bug fixes and small cleanups for
  ARM, x86 and s390.

  The task_migration_notifier revert and real fix is still pending
  review, but I'll send it as soon as possible after -rc1"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
  KVM: arm/arm64: check IRQ number on userland injection
  KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi
  KVM: VMX: Preserve host CR4.MCE value while in guest mode.
  KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8
  KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C
  KVM: PPC: Book3S HV: Streamline guest entry and exit
  KVM: PPC: Book3S HV: Use bitmap of active threads rather than count
  KVM: PPC: Book3S HV: Use decrementer to wake napping threads
  KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI
  KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken
  KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu
  KVM: PPC: Book3S HV: Minor cleanups
  KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update
  KVM: PPC: Book3S HV: Accumulate timing information for real-mode code
  KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT
  KVM: PPC: Book3S HV: Add ICP real mode counters
  KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode
  KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock
  KVM: PPC: Book3S HV: Add guest->host real mode completion counters
  KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte
  ...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "Here are a few fixes that have been pending since the previous pull
  request: a regression fix for HD-audio multiple SPDIF / HDMI devices,
  several ALC256 codec fixes, a couple of i915 HDMI audio fixes, and
  various small fixes.

  Nothing exciting, just boring, but things good to have"

* tag 'sound-fix-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix headset mic detection problem for one more machine
  ALSA: hda/realtek - Fix Headphone Mic doesn't recording for ALC256
  ALSA: hda - fix "num_steps = 0" error on ALC256
  ALSA: usb-audio: Fix audio output on Roland SC-D70 sound module
  ALSA: hda - add AZX_DCAPS_I915_POWERWELL to Baytrail
  ALSA: hda - only sync BCLK to the display clock for Haswell & Broadwell
  ALSA: hda - Mute headphone pin on suspend on XPS13 9333
  sound/oss: fix deadlock in sequencer_ioctl(SNDCTL_SEQ_OUTOFBAND)
  ALSA: asound.h - use SNDRV_CTL_ELEM_ID_NAME_MAXLEN
  ALSA: hda - potential (but unlikely) uninitialized variable
  ALSA: hda - Fix regression for slave SPDIF setups
  ALSA: intel8x0: Check pci_iomap() success for DEVICE_ALI
  ALSA: hda - simplify azx_has_pm_runtime

Pull SCSI target updates from Nicholas Bellinger:
 "Lots of activity in target land the last months.

  The highlights include:

   - Convert fabric drivers tree-wide to target_register_template() (hch
     + bart)

   - iser-target hardening fixes + v1.0 improvements (sagi)

   - Convert iscsi_thread_set usage to kthread.h + kill
     iscsi_target_tq.c (sagi + nab)

   - Add support for T10-PI WRITE_STRIP + READ_INSERT operation (mkp +
     sagi + nab)

   - DIF fixes for CONFIG_DEBUG_SG=y + UNMAP file emulation (akinobu +
     sagi + mkp)

   - Extended TCMU ABI v2 for future BIDI + DIF support (andy + ilias)

   - Fix COMPARE_AND_WRITE handling for NO_ALLLOC drivers (hch + nab)

  Thanks to everyone who contributed this round with new features,
  bug-reports, fixes, cleanups and improvements.

  Looking forward, it's currently shaping up to be a busy v4.2 as well"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (69 commits)
  target: Put TCMU under a new config option
  target: Version 2 of TCMU ABI
  target: fix tcm_mod_builder.py
  target/file: Fix UNMAP with DIF protection support
  target/file: Fix SG table for prot_buf initialization
  target/file: Fix BUG() when CONFIG_DEBUG_SG=y and DIF protection enabled
  target: Make core_tmr_abort_task() skip TMFs
  target/sbc: Update sbc_dif_generate pr_debug output
  target/sbc: Make internal DIF emulation honor ->prot_checks
  target/sbc: Return INVALID_CDB_FIELD if DIF + sess_prot_type disabled
  target: Ensure sess_prot_type is saved across session restart
  target/rd: Don't pass incomplete scatterlist entries to sbc_dif_verify_*
  target: Remove the unused flag SCF_ACK_KREF
  target: Fix two sparse warnings
  target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling
  target: simplify the target template registration API
  target: simplify target_xcopy_init_pt_lun
  target: remove the unused SCF_CMD_XCOPY_PASSTHROUGH flag
  target/rd: reduce code duplication in rd_execute_rw()
  tcm_loop: fixup tpgt string to integer conversion
  ...

Merge tag 'pwm/for-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "Not much has been happening in PWM land lately, so this contains
  mostly minor fixes that didn't seem urgent enough for a late
  pull-request last cycle"

* tag 'pwm/for-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Remove __init initializer for pwm_add_table()
  pwm: samsung: Fix output race on disabling
  pwm: mxs: Fix period divider computation
  pwm: atmel-hlcdc: Add errata handling for sama5d4
  pwm: pca9685: Constify struct regmap_config
  pwm: imx-pwm: add explicit compatible strings and required clock properties

Pull dma-buf updates from Sumit Semwal:
 "Minor cleanup only; this could've gone in for the 4.0 merge window,
  but for a copy-paste stupidity from me.

  It has been in the for-next since then, and no issues reported.

   - cleanup of dma_buf_export()

   - correction of copy-paste stupidity while doing the cleanup"

* tag 'dma-buf-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
  staging: android: ion: fix wrong init of dma_buf_export_info
  dma-buf: cleanup dma_buf_export() to make it easily extensible

Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...

Pull md updates from Neil Brown:
 "More updates that usual this time.  A few have performance impacts
  which hould mostly be positive, but RAID5 (in particular) can be very
  work-load ensitive...  We'll have to wait and see.

  Highlights:

   - "experimental" code for managing md/raid1 across a cluster using
     DLM.  Code is not ready for general use and triggers a WARNING if
     used.  However it is looking good and mostly done and having in
     mainline will help co-ordinate development.

   - RAID5/6 can now batch multiple (4K wide) stripe_heads so as to
     handle a full (chunk wide) stripe as a single unit.

   - RAID6 can now perform read-modify-write cycles which should help
     performance on larger arrays: 6 or more devices.

   - RAID5/6 stripe cache now grows and shrinks dynamically.  The value
     set is used as a minimum.

   - Resync is now allowed to go a little faster than the 'mininum' when
     there is competing IO.  How much faster depends on the speed of the
     devices, so the effective minimum should scale with device speed to
     some extent"

* tag 'md/4.1' of git://neil.brown.name/md: (58 commits)
  md/raid5: don't do chunk aligned read on degraded array.
  md/raid5: allow the stripe_cache to grow and shrink.
  md/raid5: change ->inactive_blocked to a bit-flag.
  md/raid5: move max_nr_stripes management into grow_one_stripe and drop_one_stripe
  md/raid5: pass gfp_t arg to grow_one_stripe()
  md/raid5: introduce configuration option rmw_level
  md/raid5: activate raid6 rmw feature
  md/raid6 algorithms: xor_syndrome() for SSE2
  md/raid6 algorithms: xor_syndrome() for generic int
  md/raid6 algorithms: improve test program
  md/raid6 algorithms: delta syndrome functions
  raid5: handle expansion/resync case with stripe batching
  raid5: handle io error of batch list
  RAID5: batch adjacent full stripe write
  raid5: track overwrite disk count
  raid5: add a new flag to track if a stripe can be batched
  raid5: use flex_array for scribble data
  md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid
  md: allow resync to go faster when there is competing IO.
  md: remove 'go_faster' option from ->sync_request()
  ...

Pull second batch of devicetree updates from Rob Herring:
 "As Grant mentioned in the first devicetree pull request, here is the
  2nd batch of DT changes for 4.1.  The main remaining item here is the
  endianness bindings and related 8250 driver support.

   - DT endianness specification bindings

   - big-endian 8250 serial support

   - DT overlay unittest updates

   - various DT doc updates

   - compile fixes for OF_IRQ=n"

* tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  frv: add io{read,write}{16,32}be functions
  mn10300: add io{read,write}{16,32}be functions
  Documentation: DT bindings: add doc for Altera's SoCFPGA platform
  of: base: improve of_get_next_child() kernel-doc
  Doc: dt: arch_timer: discourage clock-frequency use
  of: unittest: overlay: Keep track of created overlays
  of/fdt: fix allocation size for device node path
  serial: of_serial: Support big-endian register accesses
  serial: 8250: Add support for big-endian MMIO accesses
  of: Document {little,big,native}-endian bindings
  of/fdt: Add endianness helper function for early init code
  of: Add helper function to check MMIO register endianness
  of/fdt: Remove "reg" data prints from early_init_dt_scan_memory
  of: add vendor prefix for Artesyn
  of: Add dummy of_irq_to_resource_table() for IRQ_OF=n
  of: OF_IRQ should depend on IRQ_DOMAIN

Pull initial ACPI support for arm64 from Will Deacon:
 "This series introduces preliminary ACPI 5.1 support to the arm64
  kernel using the "hardware reduced" profile.  We don't support any
  peripherals yet, so it's fairly limited in scope:

   - MEMORY init (UEFI)

   - ACPI discovery (RSDP via UEFI)

   - CPU init (FADT)

   - GIC init (MADT)

   - SMP boot (MADT + PSCI)

   - ACPI Kconfig options (dependent on EXPERT)

  ACPI for arm64 has been in development for a while now and hardware
  has been available that can boot with either FDT or ACPI tables.  This
  has been made possible by both changes to the ACPI spec to cater for
  ARM-based machines (known as "hardware-reduced" in ACPI parlance) but
  also a Linaro-driven effort to get this supported on top of the Linux
  kernel.  This pull request is the result of that work.

  These changes allow us to initialise the CPUs, interrupt controller,
  and timers via ACPI tables, with memory information and cmdline coming
  from EFI.  We don't support a hybrid ACPI/FDT scheme.  Of course,
  there is still plenty of work to do (a serial console would be nice!)
  but I expect that to happen on a per-driver basis after this core
  series has been merged.

  Anyway, the diff stat here is fairly horrible, but splitting this up
  and merging it via all the different subsystems would have been
  extremely painful.  Instead, we've got all the relevant Acks in place
  and I've not seen anything other than trivial (Kconfig) conflicts in
  -next (for completeness, I've included my resolution below).  Nearly
  half of the insertions fall under Documentation/.

  So, we'll see how this goes.  Right now, it all depends on EXPERT and
  I fully expect people to use FDT by default for the immediate future"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits)
  ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function
  ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface()
  ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface
  ARM64: kernel: acpi: honour acpi=force command line parameter
  ARM64: kernel: acpi: refactor ACPI tables init and checks
  ARM64: kernel: psci: let ACPI probe PSCI version
  ARM64: kernel: psci: factor out probe function
  ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer
  ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed
  ARM64 / ACPI: additions of ACPI documentation for arm64
  Documentation: ACPI for ARM64
  ARM64 / ACPI: Enable ARM64 in Kconfig
  XEN / ACPI: Make XEN ACPI depend on X86
  ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64
  clocksource / arch_timer: Parse GTDT to initialize arch timer
  irqchip: Add GICv2 specific ACPI boot support
  ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
  ACPI / processor: Make it possible to get CPU hardware ID via GICC
  ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID
  ARM64 / ACPI: Parse MADT for SMP initialization
  ...

Pull ARM fixes from Russell King:
 "A few fixes for the recently merged development updates:

   - the update to convert a code branch in the procinfo structure
     forgot to update the nommu code.

   - VDSO only supported for V7 CPUs and later.

   - VDSO build creates files which should be ignored by git but are not.

   - ensure that make arch/arm/vdso/ doesn't build if it isn't enabled"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8344/1: VDSO: honor CONFIG_VDSO in Makefile
  ARM: 8343/1: VDSO: add build artifacts to .gitignore
  ARM: Fix nommu booting
  ARM: 8342/1: VDSO: depend on CPU_V7

Pull arch/nios2 updates from Ley Foon Tan:

 - update cache management code

 - rework trap handler with new define trap #.

 - fix on check header warning.

* tag 'nios2-v4.1-rc1' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: rework cache
  nios2: Add types.h header required for __u32 type
  nios2: rework trap handler
  nios2: remove end address checking for initda

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao.

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  eth: bf609 eth clock: add pclk clock for stmmac driver probe
  blackfin: Wire up missing syscalls
  arch: blackfin: kernel: kgdb: Remove unused function
  dma: fix build error after update to v3.19
  blackfin: io: define __raw_readx/writex with bfin_readx/writex
  bf609: add resources for lcd nl8048
  pm: sometimes wake up from suspend to RAM would fail
  debug-mmrs: Eliminate all traces of the USB_PHY_TEST MMR
  bf609: remove softswitch i2c configuration from adv7842 and adv7511 platform data
  bf609: add platform data for soft switch devices on the video extenders
  bf609: enable soft switch gpio driver by default
  bf609: add gpio soft switch platform data for mcp23017 i2c devices
  bf609: use new SND_BF6XX_PCM to choose audio pcm driver
  bug[220] kgdb: change the smp cross core function entry
  arch: blackfin: kernel: setup.c: Cleaning up missing null-terminate in conjunction with strncpy
  blackfin: defconfigs: cleanup unused CONFIG_MTD_CHAR, add MTD_SPI_NOR for BF537-STAMP

Pull Metag architecture updates from James Hogan:
 "Just the one change for v4.1-rc1.  A minor cleanup of copy_thread()"

* tag 'metag-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: copy_thread(): rename 'arg' argument to 'kthread_arg'

Pull ARC updates from Vineet Gupta:

 - perf fixes/improvements

 - misc cleanups

* tag 'arc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: don't add code for impossible case
  ARC: perf: Rename DT binding to not confuse with power mgmt
  ARC: perf: add user space attribution in callchains
  ARC: perf: Add kernel callchain support
  ARC: perf: support cache hit/miss ratio
  ARC: perf: Add some comments/debug stuff
  ARC: perf: make @arc_pmu static global
  ARC: mem init spring cleaning - No functional changes
  ARC: Fix RTT boot printing
  ARC: fold __builtin_constant_p() into test_bit()
  ARC: rename unhandled exception handler
  ARC: cosmetic: Remove unused ECR bitfield masks
  ARC: Fix WRITE_BCR
  ARC: [nsimosci] Update defconfig
  arc: copy_thread(): rename 'arg' argument to 'kthread_arg'

Pull nfsd updates from Bruce Fields:
 "A quiet cycle this time; this is basically entirely bugfixes.

  The few that aren't cc'd to stable are cleanup or seemed unlikely to
  affect anyone much"

* 'for-4.1' of git://linux-nfs.org/~bfields/linux:
  uapi: Remove kernel internal declaration
  nfsd: fix nsfd startup race triggering BUG_ON
  nfsd: eliminate NFSD_DEBUG
  nfsd4: fix READ permission checking
  nfsd4: disallow SEEK with special stateids
  nfsd4: disallow ALLOCATE with special stateids
  nfsd: add NFSEXP_PNFS to the exflags array
  nfsd: Remove duplicate macro define for max sec label length
  nfsd: allow setting acls with unenforceable DENYs
  nfsd: NFSD_FAULT_INJECTION depends on DEBUG_FS
  nfsd: remove unused status arg to nfsd4_cleanup_open_state
  nfsd: remove bogus setting of status in nfsd4_process_open2
  NFSD: Use correct reply size calculating function
  NFSD: Using path_equal() for checking two paths

Pull btrfs updates from Chris Mason:
 "I've been running these through a longer set of load tests because my
  commits change the free space cache writeout.  It fixes commit stalls
  on large filesystems (~20T space used and up) that we have been
  triggering here.  We were seeing new writers blocked for 10 seconds or
  more during commits, which is far from good.

  Josef and I fixed up ENOSPC aborts when deleting huge files (3T or
  more), that are triggered because our metadata reservations were not
  properly accounting for crcs and were not replenishing during the
  truncate.

  Also in this series, a number of qgroup fixes from Fujitsu and Dave
  Sterba collected most of the pending cleanups from the list"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (93 commits)
  btrfs: quota: Update quota tree after qgroup relationship change.
  btrfs: quota: Automatically update related qgroups or mark INCONSISTENT flags when assigning/deleting a qgroup relations.
  btrfs: qgroup: clear STATUS_FLAG_ON in disabling quota.
  btrfs: Update btrfs qgroup status item when rescan is done.
  btrfs: qgroup: Fix dead judgement on qgroup_rescan_leaf() return value.
  btrfs: Don't allow subvolid >= (1 << BTRFS_QGROUP_LEVEL_SHIFT) to be created
  btrfs: Check qgroup level in kernel qgroup assign.
  btrfs: qgroup: allow to remove qgroup which has parent but no child.
  btrfs: qgroup: return EINVAL if level of parent is not higher than child's.
  btrfs: qgroup: do a reservation in a higher level.
  Btrfs: qgroup, Account data space in more proper timings.
  Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.
  Btrfs: qgroup: free reserved in exceeding quota.
  Btrfs: qgroup: cleanup, remove an unsued parameter in btrfs_create_qgroup().
  btrfs: qgroup: fix limit args override whole limit struct
  btrfs: qgroup: update limit info in function btrfs_run_qgroups().
  btrfs: qgroup: consolidate the parameter of fucntion update_qgroup_limit_item().
  btrfs: qgroup: update qgroup in memory at the same time when we update it in btree.
  btrfs: qgroup: inherit limit info from srcgroup in creating snapshot.
  btrfs: Support busy loop of write and delete
  ...

Pull xfs update from Dave Chinner:
 "This update contains:

   - RENAME_WHITEOUT support

   - conversion of per-cpu superblock accounting to use generic counters

   - new inode mmap lock so that we can lock page faults out of
     truncate, hole punch and other direct extent manipulation functions
     to avoid racing mmap writes from causing data corruption

   - rework of direct IO submission and completion to solve data
     corruption issue when running concurrent extending DIO writes.
     Also solves problem of running IO completion transactions in
     interrupt context during size extending AIO writes.

   - FALLOC_FL_INSERT_RANGE support for inserting holes into a file via
     direct extent manipulation to avoid needing to copy data within the
     file

   - attribute block header field overflow fix for 64k block size
     filesystems

   - Lots of changes to log messaging to be more informative and concise
     when errors occur.  Also prevent a lot of unnecessary log spamming
     due to cascading failures in error conditions.

   - lots of cleanups and bug fixes

  One thing of note is the direct IO fixes that we merged last week
  after the window opened.  Even though a little late, they fix a user
  reported data corruption and have been pretty well tested.  I figured
  there was not much point waiting another 2 weeks for -rc1 to be
  released just so I could send them to you..."

* tag 'xfs-for-linus-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
  xfs: using generic_file_direct_write() is unnecessary
  xfs: direct IO EOF zeroing needs to drain AIO
  xfs: DIO write completion size updates race
  xfs: DIO writes within EOF don't need an ioend
  xfs: handle DIO overwrite EOF update completion correctly
  xfs: DIO needs an ioend for writes
  xfs: move DIO mapping size calculation
  xfs: factor DIO write mapping from get_blocks
  xfs: unlock i_mutex in xfs_break_layouts
  xfs: kill unnecessary firstused overflow check on attr3 leaf removal
  xfs: use larger in-core attr firstused field and detect overflow
  xfs: pass attr geometry to attr leaf header conversion functions
  xfs: disallow ro->rw remount on norecovery mount
  xfs: xfs_shift_file_space can be static
  xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate
  fs: Add support FALLOC_FL_INSERT_RANGE for fallocate
  xfs: Fix incorrect positive ENOMEM return
  xfs: xfs_mru_cache_insert() should use GFP_NOFS
  xfs: %pF is only for function pointers
  xfs: fix shadow warning in xfs_da3_root_split()
  ...

Commit cae2a173 ("x86: clean up/fix 'copy_in_user()' tail zeroing")
fixed the failure case tail zeroing of one special case of the x86-64
generic user-copy routine, namely when used for the user-to-user case
("copy_in_user()").

But in the process it broke an even more unusual case: using the user
copy routine for kernel-to-kernel copying.

Now, normally kernel-kernel copies are obviously done using memcpy(),
but we have a couple of special cases when we use the user-copy
functions.  One is when we pass a kernel buffer to a regular user-buffer
routine, using set_fs(KERNEL_DS).  That's a "normal" case, and continued
to work fine, because it never takes any faults (with the possible
exception of a silent and successful vmalloc fault).

But Jan Beulich pointed out another, very unusual, special case: when we
use the user-copy routines not because it's a path that expects a user
pointer, but for a couple of ftrace/kgdb cases that want to do a kernel
copy, but do so using "unsafe" buffers, and use the user-copy routine to
gracefully handle faults.  IOW, for probe_kernel_write().

And that broke for the case of a faulting kernel destination, because we
saw the kernel destination and wanted to try to clear the tail of the
buffer.  Which doesn't work, since that's what faults.

This only triggers for things like kgdb and ftrace users (eg trying
setting a breakpoint on read-only memory), but it's definitely a bug.
The fix is to not compare against the kernel address start (TASK_SIZE),
but instead use the same limits "access_ok()" uses.
Reported-and-tested-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- flush dcache before flush instruction cache
- remork update_mmu_cache and flush_dcache_page
- add shmparam.h
Signed-off-by: Ley Foon Tan <lftan@altera.com>

Reported by the header checker (CONFIG_HEADERS_CHECK=y):

  CHECK   usr/include/asm/ (31 files)
./usr/include/asm/ptrace.h:77: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Ley Foon Tan <lftan@altera.com>

We have two machines with alc256 codec in the pin quirk table, so
moving the common pins to ALC256_STANDARD_PINS.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1447909Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Steven Miao <realmz6@gmail.com>

The related syscalls are below which may cause samples/kdbus building
break in next-20150401 tree, the related information and error:

    CALL    scripts/checksyscalls.sh
  <stdin>:1223:2: warning: #warning syscall kcmp not implemented [-Wcpp]
  <stdin>:1226:2: warning: #warning syscall finit_module not implemented [-Wcpp]
  <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp]
  <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp]
  <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp]
  <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp]
  <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp]
  <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp]
  <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp]
  <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp]
  [...]
    HOSTCC  samples/kdbus/kdbus-workers
  samples/kdbus/kdbus-workers.c: In function ‘prime_new’:
  samples/kdbus/kdbus-workers.c:930:18: error: ‘__NR_memfd_create’ undeclared (first use in this function)
    p->fd = syscall(__NR_memfd_create, "prime-area", MFD_CLOEXEC);
                    ^
  samples/kdbus/kdbus-workers.c:930:18: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>

Remove the function kgdb_post_primary_code() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>

Signed-off-by: Steven Miao <realmz6@gmail.com>

Signed-off-by: Steven Miao <realmz6@gmail.com>

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>

Sometimes it fails to wake up from suspend to RAM, this is because
we would flush the data cache by assemble command FLUSHINV before
suspend to RAM, and there is a delay between this command execution
and cache flush completion. Add a 1uS delay to works around this.
Signed-off-by: Aaron Wu <Aaron.wu@analog.com>

Interacting with the USB_PHY_TEST MMR through debugfs was causing wide-spread
chaos in the realm (kernel panic). Expunge all references to this demonic
register.
Signed-off-by: Andre Wolokita <Andre.Wolokita@analog.com>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

There is a new bf6xx audio dma driver, so we don't reuse
bf5xx i2s pcm driver again.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

Replacing strncpy with strlcpy to avoid strings that lacks null terminate.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Steven Miao <realmz6@gmail.com>

Signed-off-by: Steven Miao <realmz6@gmail.com>

For platforms that don't support DT, some early MFD modules can register
lookup tables. Remove the __init annotation so that this works. This is
similar to gpio_add_lookup_table() which allows late additions.

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>