- 29 Aug, 2021 30 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2021-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next-2021-08-29 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. wireless-drivers-next patches for v5.15 Second, and most likely last, set of patches for v5.15. Lots of iwlwifi patches this time, but smaller changes to other drivers as well. Nothing special standing out. Major changes: rtw88 * add quirk to disable pci caps on HP Pavilion 14-ce0xxx brcmfmac * Add WPA3 Personal with FT to supported cipher suites wcn36xx * allow firmware name to be overridden by DT iwlwifi * support scanning hidden 6GHz networks * support for a new hardware family (Bz) * support for new firmware API versions mwifiex * add reset_d3cold quirk for Surface gen4+ devices ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jing Yangyang authored
./include/linux/ssb/ssb_driver_extif.h:200:8-9:WARNING: return of 0/1 in function 'ssb_extif_available' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824061341.59255-1-deng.changcheng@zte.com.cn
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Tsuchiya Yuto authored
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by:Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by:
Jonas Dreßler <verdre@v0yd.nl> Signed-off-by:
-
Jonas Dreßler authored
This commit adds the ability to apply device-specific quirks to the mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses with dmi.c. We'll add identifiers to match various MS Surface devices, which this is primarily meant for, later. This commit is a slightly modified version of a previous patch sent in by Tsuchiya Yuto. Co-developed-by:
-
Ahmad Fatoum authored
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e624 ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
Zenghui Yu authored
As it had never been used since the initial commit 8369ae33 ("bcma: add Broadcom specific AMBA bus driver"). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Zenghui Yu authored
kmemleak reported that dev_name() of internally-handled cores were leaked on driver unbinding. Let's use device_initialize() to take refcounts for them and put_device() to properly free the related stuff. While looking at it, there's another potential issue for those which should be *registered* into driver core. If device_register() failed, we put device once and freed bcma_device structures. In bcma_unregister_cores(), they're treated as unregistered and we hit both UAF and double-free. That smells not good and has also been fixed now. Fixes: ab54bc84 ("bcma: fill core details for every device") Signed-off-by:
-
Kalle Valo authored
Merge commit 'e257d969' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not ready yet so I'm skipping those and pulling an earlier commit. I modified Luca's description below to not include the skipped commits. iwlwifi patches for v5.15 * Support scanning hidden 6GHz networks; * Some improvements in the FW error dumps; * Add some HE capability flags * A bunch of janitorial clean-ups; * Clean-ups in the TX code; * Small fix for SMPS; * Support for a new hardware family (Bz); * Small fix in the scan code; * A bunch of changes in the D3 code, including new FW API; * Finalize the refactoring of 6GHz scan; * Initial changes in the SAR profile code; * Fix reading one of our ACPI tables (WTAS); * Support some new ACPI table revisions; * Support new API of the WoWlan status FW notification; * Fixes in SAR ACPI tables handling; * Some debugging improvements; * Fix in ROC; * Support for new FW API versions; * Support new FW command versions; * Some other small fixes, clean-ups and improvements.
-
Li RongQing authored
smp_processor_id()/raw* will be called once each when not more queues in virtnet_xdp_get_sq() which is called in non-preemptible context, so it's safe to call the function smp_processor_id() once. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. Finally, the now useless 'dma_mask' variable has been removed. It has been compile tested. @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been compile tested. @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Subbaraya Sundeep authored
NPC extraction profile marks layer types NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for STAG after parsing input packet. Those layer types can be used to install ntuple filters using vlan-etype option. Below are the commands and corresponding behavior with this patch in place. > alias nt "ethtool -U eth0 flow-type ether" > nt vlan 5 m 0xf000 action 0 Input packets with outer VLAN id as 5 i.e, stag packets with VLAN id 5 and ctag packets with VLAN id as 5 are hit. > nt vlan-etype 0x8100 action 0 All input ctag packets with any VLAN id are hit. > nt vlan-etype 0x88A8 action 0 All input stag packets with any VLAN id are hit. > nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0 All input ctag packets with VLAN id 5 are hit. > nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0 All input stag packets with VLAN id 5 are hit. Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Sunil Goutham authored
Fixed inconsistent license text across the RVU admin function driver. Signed-off-by:
-
Sunil Goutham authored
Fixed inconsistent license text across the netdev drivers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-David S. Miller authored
queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-08-27 ravindhan Gunasekaran says: This adds support for Credit-based shaper qdisc offload from Traffic Control system. It enables traffic prioritization and bandwidth reservation via the Credit-Based Shaper which is implemented in hardware by i225 controller. Patch 1/3 adds a default cycle-time for TSN mode to be configured. Patch 2/3 helps to separate TSN mode programming on the fly and during reset sequence. It also simplifies handling features flags for various TSN modes supported by i225 in the driver. Patch 3/3 adds support for IEEE802.1Qav(CBS) standard implemented in i225 HW. Two sets of CBS HW shapers are present in i225 and driver enables them in the two high priority queues. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.15. Major changes: wcn36xx * allow firmware name to be overridden by DT
-
David Mosberger-Tang authored
Move static "isinit" variable to wilc_spi structure to allow multiple WILC1000 devices per machine. Signed-off-by:
David Mosberger-Tang <davidm@egauge.net> Signed-off-by:
-
Paweł Drewniak authored
This allows the driver to connect to BSSIDs supporting SAE with 802.11r. Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2. AP was set to 'sae-mixed' (WPA2/3 Personal). Signed-off-by:
Paweł Drewniak <czajernia@gmail.com> Signed-off-by:
-
Linus Walleij authored
The SSB header only uses the legacy <linux/gpio.h> header to get struct gpio_chip so inluce <linux/gpio/driver.h> which is the right include to deal with gpio_chip. Cc: Michael Buesch <m@bues.ch> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Colin Ian King authored
Don't populate the array fsm_state on the stack but instead it static const. Makes the object code smaller by 154 bytes: Before: text data bss dec hex filename 9213 3904 0 13117 333d .../wireless/rsi/rsi_91x_debugfs.o After: text data bss dec hex filename 8995 3968 0 12963 32a3 .../wireless/rsi/rsi_91x_debugfs.o (gcc version 10.3.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:6: warning: variable 'place' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (chnl > 14) { ^~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:909:9: note: uninitialized use occurs here return place; ^~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:2: note: remove the 'if' if its condition is always true if (chnl > 14) { ^~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:899:10: note: initialize the variable 'place' to silence this warning u8 place; ^ = '\0' 1 warning generated. Commit 369956ae ("rtlwifi: rtl8192de: Remove redundant variable initializations") removed the initialization of place but it appears that this removal was in the wrong function. _rtl92c_phy_get_rightchnlplace() returns place's value at the end of the function so now if the if statement is false, place never gets initialized. Add that initialization back to address the warning. place's initialization is not necessary in rtl92d_get_rightchnlplace_for_iqk() as place is only used within the if statement so it can be removed, which is likely what was intended in the first place. Fixes: 369956ae ("rtlwifi: rtl8192de: Remove redundant variable initializations") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Ugo Rémery authored
8821CE causes random freezes on HP Pavilion 14-ce0019nf. Add a quirk to disable pci ASPM capability. Signed-off-by:
Ugo Rémery <ugo.remery@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Dan Carpenter authored
This error path is unlikely because of it checked for NULL and returned -ENOMEM earlier in the function. But it should return an error code here as well if we ever do hit it because of a race condition or something. Fixes: bdcd8170 ("Add ath6kl cleaned up driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Miaoqing Pan authored
The problem is that gpio_free() can sleep and the cfg_soc() can be called with spinlocks held. One problematic call tree is: --> ath_reset_internal() takes &sc->sc_pcu_lock spin lock --> ath9k_hw_reset() --> ath9k_hw_gpio_request_in() --> ath9k_hw_gpio_request() --> ath9k_hw_gpio_cfg_soc() Remove gpio_free(), use error message instead, so we should make sure there is no GPIO conflict. Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(), as gpio_mask will never be set for SOC chips. Signed-off-by:Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
-
Zekun Shen authored
Bad header can have large length field which can cause OOB. cptr is the last bytes for read, and the eeprom is parsed from high to low address. The OOB, triggered by the condition length > cptr could cause memory error with a read on negative index. There are some sanity check around length, but it is not compared with cptr (the remaining bytes). Here, the corrupted/bad EEPROM can cause panic. I was able to reproduce the crash, but I cannot find the log and the reproducer now. After I applied the patch, the bug is no longer reproducible. Signed-off-by:
Zekun Shen <bruceshenzk@gmail.com> Signed-off-by:
-
Loic Poulain authored
When receiving a beacon or probe response, we should update the boottime_ns field which is the timestamp the frame was received at. (cf mac80211.h) This fixes a scanning issue with Android since it relies on this timestamp to determine when the AP has been seen for the last time (via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter). Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
The WLAN NV firmware blob differs between platforms, and possibly devices, so add support in the wcn36xx driver for reading the path of this file from DT in order to allow these files to live in a generic file system (or linux-firmware). For some reason the parent (wcnss_ctrl) also needs to upload this blob, so rather than specifying the same information in both nodes wcn36xx reads the string from the parent's of_node. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by:
Aníbal Limón <anibal.limon@linaro.org> Signed-off-by:
-
Joseph Gates authored
If the operating channel is the first in the scan list, it was seen that a finish scan request would be sent before a start scan request was sent, causing the firmware to fail all future scans. Track the current channel being scanned to avoid requesting the scan finish before it starts. Cc: <stable@vger.kernel.org> Fixes: 5973a294 ("wcn36xx: Fix software-driven scan") Signed-off-by:
Joseph Gates <jgates@squareup.com> Signed-off-by:
-
- 28 Aug, 2021 10 commits
-
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: queue mgmt updates The first pair of patches help smooth the driver's response when the firmware has gone through a recovery/reboot cycle. The next four patches take care of a couple things seen when changing the interface status. ==================== Signed-off-by: -
Shannon Nelson authored
The queues can be freed in ionic_close(). They need to be recreated after ionic_open(). It doesn't need to replay the whole config. It only needs to create the timestamping queues again. Signed-off-by:
Allen Hubbe <allenbh@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Move the hwstamp configuration use of queue_lock up a level to simplify use and error handling. Signed-off-by:
-
Shannon Nelson authored
Add the queue configuration lock to ionic_open() and ionic_stop() so that they don't collide with other in parallel queue configuration actions such as MTU changes as can be demonstrated with a tight loop of ifup/change-mtu/ifdown. Signed-off-by:
-
Shannon Nelson authored
Make sure the ctx struct has the new mac address before any save operations happen. Signed-off-by:
-
Shannon Nelson authored
Since the heartbeat check will already have complained about the firmware status, don't bother complaining about the DEVCMD failing. We'll keep the print message but demote it to a debug messages so that we normally no longer see it. Signed-off-by:
-
Shannon Nelson authored
In some cases of fw_down it was called because there was a fw_generation change, and the firmware is already back up. In order to keep the down time to a minimum, don't wait for the next watchdog polling cycle, fire another watchdog off as soon as we can - an out-of-cycle check won't hurt, and may well speed up the recovery. Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some updates for the HNS3 ethernet driver. This series includes some optimizations, cleanups and one ==================== Signed-off-by: -
Hao Chen authored
Add some required spaces in comment for cleanup. Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Hao Chen authored
Some local variable declarations are no need to add "static", so remove it. Signed-off-by:
-
