- 15 Nov, 2013 12 commits
-
-
Larry Finger authored
This driver uses a number of macros to get and set various fields in the RX and TX descriptors. To work correctly, a u8 pointer to the descriptor must be used; however, in some cases a descriptor structure pointer is used instead. In addition, a duplicated statement is removed. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by:
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Ujjal Roy authored
1) After driver load failure, clear 'card->adapter' instead of card pointer so that card specific cleanup is performed later when user unloads the driver. 2) Clear usb_card pointer in disconnect handler to avoid invalid memory access when user unloads the driver after removing the card. Signed-off-by:
Ujjal Roy <royujjal@gmail.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
When driver is failed to load, card pointer doesn't get freed. We will free it in cleanup handler which is called in failure as well as unload path. Also, update drvdata in init/cleanup handlers instead of register/unregister handlers. Signed-off-by:
-
Amitkumar Karwar authored
1) Currently we freeing wdev for each interface in driver unload path. We may leak memory if user have already deleted an interface. mwifiex_add_virtual_intf() allocates wdev structure. So it should be freed in mwifiex_del_virtual_intf(). This will make sure that wdev will be freed when user deletes an interface and also in unload path. 2) "priv->netdev->ieee80211_ptr" should also be cleared in mwifiex_del_virtual_intf. Signed-off-by:
-
Amitkumar Karwar authored
We don't need to free/unregister wiphy when mwifiex_register_cfg80211() fails. The routine internally takes care of it. This redundant code can cause NULL pointer dereference, for adapter->wiphy. Reported-by:
-
Amitkumar Karwar authored
1) If register_netdevice() is failed, we are freeing netdev pointer, but priv->netdev is not cleared. This gives kernel paging request error when driver is unloaded or interface is deleted. Fix the problem by clearing the pointer. 2) Fix memory leak issue by freeing 'wdev' in failure paths. Also, clear priv->wdev pointer. As mwifiex_add_virtual_intf() successfully handles the failure conditions, redundant code under err_add_intf label is removed in this patch. Reported-by:
-
Amitkumar Karwar authored
mwifiex_add_virtual_intf() returns ERR_PTR values. So use IS_ERR() macro instead of checking for NULL pointer. Reported-by:
-
Felix Fietkau authored
Commit "rt2x00: fix HT TX descriptor settings regression" assumes that the control parameter to rt2x00mac_tx is always non-NULL. There is an internal call in rt2x00lib_bc_buffer_iter where NULL is passed. Fix the resulting crash by adding an initialized dummy on-stack ieee80211_tx_control struct. Cc: stable@vger.kernel.org # 3.7+ Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Sujith Manoharan authored
On some boards which are based on AR9300, AR9580 or AR9550, MCS15 usage is problematic. This is because these boards use a "frequency doubler", which doubles the refclk to get better EVM, but causes spurs. Handle this properly in the driver to recover throughput. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Luis R. Rodriguez authored
A world regulatory domain check was in place that prevents user dynamic regulatory hints from being processed. This was there for historical reasons as this was only possible previously for world roaming cards and dynamic regulatory settings was only possible for country IEs. Fix this by enforcing the world regulatory domain check only for when the initiator is a country IE. Support for dynamic user regulatory support is already checked. Signed-off-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
-
-
- 13 Nov, 2013 5 commits
-
-
Johan Hedberg authored
The SMP security request is for a slave role device to request the master role device to initiate a pairing request. If we receive this command while we're in the slave role we should reject it appropriately. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Seung-Woo Kim authored
Removing a bond and disconnecting from a specific remote device can cause l2cap_chan_send() is called after l2cap_chan_del() is called. This causes following crash. [ 1384.972086] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1384.972090] pgd = c0004000 [ 1384.972125] [00000008] *pgd=00000000 [ 1384.972137] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 1384.972144] Modules linked in: [ 1384.972156] CPU: 0 PID: 841 Comm: krfcommd Not tainted 3.10.14-gdf22a71-dirty #435 [ 1384.972162] task: df29a100 ti: df178000 task.ti: df178000 [ 1384.972182] PC is at l2cap_create_basic_pdu+0x30/0x1ac [ 1384.972191] LR is at l2cap_chan_send+0x100/0x1d4 [ 1384.972198] pc : [<c051d250>] lr : [<c0521c78>] psr: 40000113 [ 1384.972198] sp : df179d40 ip : c083a010 fp : 00000008 [ 1384.972202] r10: 00000004 r9 : 0000065a r8 : 000003f5 [ 1384.972206] r7 : 00000000 r6 : 00000000 r5 : df179e84 r4 : da557000 [ 1384.972210] r3 : 00000000 r2 : 00000004 r1 : df179e84 r0 : 00000000 [ 1384.972215] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1384.972220] Control: 10c53c7d Table: 5c8b004a DAC: 00000015 [ 1384.972224] Process krfcommd (pid: 841, stack limit = 0xdf178238) [ 1384.972229] Stack: (0xdf179d40 to 0xdf17a000) [ 1384.972238] 9d40: 00000000 da557000 00000004 df179e84 00000004 000003f5 0000065a 00000000 [ 1384.972245] 9d60: 00000008 c0521c78 df179e84 da557000 00000004 da557204 de0c6800 df179e84 [ 1384.972253] 9d80: da557000 00000004 da557204 c0526b7c 00000004 df724000 df179e84 00000004 [ 1384.972260] 9da0: df179db0 df29a100 c083bc48 c045481c 00000001 00000000 00000000 00000000 [ 1384.972267] 9dc0: 00000000 df29a100 00000000 00000000 00000000 00000000 df179e10 00000000 [ 1384.972274] 9de0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1384.972281] 9e00: 00000000 00000000 00000000 00000000 df179e4c c000ec80 c0b538c0 00000004 [ 1384.972288] 9e20: df724000 df178000 00000000 df179e84 c0b538c0 00000000 df178000 c07f4570 [ 1384.972295] 9e40: dcad9c00 df179e74 c07f4394 df179e60 df178000 00000000 df179e84 de247010 [ 1384.972303] 9e60: 00000043 c0454dec 00000001 00000004 df315c00 c0530598 00000004 df315c0c [ 1384.972310] 9e80: ffffc32c 00000000 00000000 df179ea0 00000001 00000000 00000000 00000000 [ 1384.972317] 9ea0: df179ebc 00000004 df315c00 c05df838 00000000 c0530810 c07d08c0 d7017303 [ 1384.972325] 9ec0: 6ec245b9 00000000 df315c00 c0531b04 c07f3fe0 c07f4018 da67a300 df315c00 [ 1384.972332] 9ee0: 00000000 c05334e0 df315c00 df315b80 df315c00 de0c6800 da67a300 00000000 [ 1384.972339] 9f00: de0c684c c0533674 df204100 df315c00 df315c00 df204100 df315c00 c082b138 [ 1384.972347] 9f20: c053385c c0533754 a0000113 df178000 00000001 c083bc48 00000000 c053385c [ 1384.972354] 9f40: 00000000 00000000 00000000 c05338c4 00000000 df9f0000 df9f5ee4 df179f6c [ 1384.972360] 9f60: df178000 c0049db4 00000000 00000000 c07f3ff8 00000000 00000000 00000000 [ 1384.972368] 9f80: df179f80 df179f80 00000000 00000000 df179f90 df179f90 df9f5ee4 c0049cfc [ 1384.972374] 9fa0: 00000000 00000000 00000000 c000f168 00000000 00000000 00000000 00000000 [ 1384.972381] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1384.972388] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00010000 00000600 [ 1384.972411] [<c051d250>] (l2cap_create_basic_pdu+0x30/0x1ac) from [<c0521c78>] (l2cap_chan_send+0x100/0x1d4) [ 1384.972425] [<c0521c78>] (l2cap_chan_send+0x100/0x1d4) from [<c0526b7c>] (l2cap_sock_sendmsg+0xa8/0x104) [ 1384.972440] [<c0526b7c>] (l2cap_sock_sendmsg+0xa8/0x104) from [<c045481c>] (sock_sendmsg+0xac/0xcc) [ 1384.972453] [<c045481c>] (sock_sendmsg+0xac/0xcc) from [<c0454dec>] (kernel_sendmsg+0x2c/0x34) [ 1384.972469] [<c0454dec>] (kernel_sendmsg+0x2c/0x34) from [<c0530598>] (rfcomm_send_frame+0x58/0x7c) [ 1384.972481] [<c0530598>] (rfcomm_send_frame+0x58/0x7c) from [<c0530810>] (rfcomm_send_ua+0x98/0xbc) [ 1384.972494] [<c0530810>] (rfcomm_send_ua+0x98/0xbc) from [<c0531b04>] (rfcomm_recv_disc+0xac/0x100) [ 1384.972506] [<c0531b04>] (rfcomm_recv_disc+0xac/0x100) from [<c05334e0>] (rfcomm_recv_frame+0x144/0x264) [ 1384.972519] [<c05334e0>] (rfcomm_recv_frame+0x144/0x264) from [<c0533674>] (rfcomm_process_rx+0x74/0xfc) [ 1384.972531] [<c0533674>] (rfcomm_process_rx+0x74/0xfc) from [<c0533754>] (rfcomm_process_sessions+0x58/0x160) [ 1384.972543] [<c0533754>] (rfcomm_process_sessions+0x58/0x160) from [<c05338c4>] (rfcomm_run+0x68/0x110) [ 1384.972558] [<c05338c4>] (rfcomm_run+0x68/0x110) from [<c0049db4>] (kthread+0xb8/0xbc) [ 1384.972576] [<c0049db4>] (kthread+0xb8/0xbc) from [<c000f168>] (ret_from_fork+0x14/0x2c) [ 1384.972586] Code: e3100004 e1a07003 e5946000 1a000057 (e5969008) [ 1384.972614] ---[ end trace 6170b7ce00144e8c ]--- Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
-
Seung-Woo Kim authored
L2CAP socket validates proper bdaddr_type for connect, so this patch fixes to set explictly bdaddr_type for RFCOMM connect. Signed-off-by:
-
Seung-Woo Kim authored
L2CAP socket bind checks its bdaddr type but RFCOMM kernel thread does not assign proper bdaddr type for L2CAP sock. This can cause that RFCOMM failure. Signed-off-by:
-
Marcel Holtmann authored
The commit 94a86df0 seem to have uncovered a long standing bug that did not trigger so far. BUG: unable to handle kernel paging request at 00000009dd503502 IP: [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 PGD 0 Oops: 0000 [#1] SMP Modules linked in: ath5k ath mac80211 cfg80211 CPU: 2 PID: 1459 Comm: bluetoothd Not tainted 3.11.0-133163-gcebd830 #2 Hardware name: System manufacturer System Product Name/P6T DELUXE V2, BIOS 1202 12/22/2010 task: ffff8803304106a0 ti: ffff88033046a000 task.ti: ffff88033046a000 RIP: 0010:[<ffffffff815b1868>] [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP: 0018:ffff88033046bed8 EFLAGS: 00010246 RAX: 00000009dd503502 RBX: 0000000000000003 RCX: 00007fffa2ed5548 RDX: 0000000000000003 RSI: 0000000000000012 RDI: ffff88032fd37480 RBP: ffff88033046bf28 R08: 00007fffa2ed554c R09: ffff88032f5707d8 R10: 00007fffa2ed5548 R11: 0000000000000202 R12: ffff880330bbd000 R13: 00007fffa2ed5548 R14: 0000000000000003 R15: 00007fffa2ed554c FS: 00007fc44cfac700(0000) GS:ffff88033fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000009dd503502 CR3: 00000003304c2000 CR4: 00000000000007e0 Stack: ffff88033046bf28 ffffffff815b0f2f ffff88033046bf18 0002ffff81105ef6 0000000600000000 ffff88032fd37480 0000000000000012 00007fffa2ed5548 0000000000000003 00007fffa2ed554c ffff88033046bf78 ffffffff814c0380 Call Trace: [<ffffffff815b0f2f>] ? rfcomm_sock_setsockopt+0x5f/0x190 [<ffffffff814c0380>] SyS_getsockopt+0x60/0xb0 [<ffffffff815e0852>] system_call_fastpath+0x16/0x1b Code: 02 00 00 00 0f 47 d0 4c 89 ef e8 74 13 cd ff 83 f8 01 19 c9 f7 d1 83 e1 f2 e9 4b ff ff ff 0f 1f 44 00 00 49 8b 84 24 70 02 00 00 <4c> 8b 30 4c 89 c0 e8 2d 19 cd ff 85 c0 49 89 d7 b9 f2 ff ff ff RIP [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP <ffff88033046bed8> CR2: 00000009dd503502 It triggers in the following segment of the code: 0x1313 is in rfcomm_sock_getsockopt (net/bluetooth/rfcomm/sock.c:743). 738 739 static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __user *optval, int __user *optlen) 740 { 741 struct sock *sk = sock->sk; 742 struct rfcomm_conninfo cinfo; 743 struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; 744 int len, err = 0; 745 u32 opt; 746 747 BT_DBG("sk %p", sk); The l2cap_pi(sk) is wrong here since it should have been rfcomm_pi(sk), but that socket of course does not contain the low-level connection details requested here. Tracking down the actual offending commit, it seems that this has been introduced when doing some L2CAP refactoring: commit 8c1d787b Author: Gustavo F. Padovan <padovan@profusion.mobi> Date: Wed Apr 13 20:23:55 2011 -0300 @@ -743,6 +743,7 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u struct sock *sk = sock->sk; struct sock *l2cap_sk; struct rfcomm_conninfo cinfo; + struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; int len, err = 0; u32 opt; @@ -787,8 +788,8 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; - cinfo.hci_handle = l2cap_pi(l2cap_sk)->conn->hcon->handle; - memcpy(cinfo.dev_class, l2cap_pi(l2cap_sk)->conn->hcon->dev_class, 3); + cinfo.hci_handle = conn->hcon->handle; + memcpy(cinfo.dev_class, conn->hcon->dev_class, 3); The l2cap_sk got accidentally mixed into the sk (which is RFCOMM) and now causing a problem within getsocketopt() system call. To fix this, just re-introduce l2cap_sk and make sure the right socket is used for the low-level connection details. Reported-by:
Fabio Rossi <rossi.f@inwind.it> Reported-by:
Janusz Dziedzic <janusz.dziedzic@gmail.com> Tested-by:
-
- 11 Nov, 2013 23 commits
-
-
Dan Williams authored
Userspace uses the netdev devtype for stuff like device naming and type detection. Be nice and set it. Remove the pointless #if/#endif around SET_NETDEV_DEV too. Signed-off-by:
Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Carpenter authored
There are several places which are missing unlocks. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock before return from function wcn36xx_smd_update_proberesp_tmpl() in the error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Sujith Manoharan authored
Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by:
-
Dan Carpenter authored
On 64 bit systems we write past the end of the arg[] array. Fixes: 8e84c258 ('wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware') Signed-off-by:
-
Ujjal Roy authored
The eth_hdr is never defined in this driver but it gets compiled without any warning/error because kernel has defined eth_hdr. Fix it by defining our own p_ethhdr and use it instead of eth_hdr. Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by:
-
Avinash Patil authored
While receiving a packet on SDIO interface, we allocate skb with size multiple of SDIO block size. We need to resize this skb after RX using packet length from RX header. Cc: <stable@vger.kernel.org> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Larry Finger authored
The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. Signed-off-by:
-
Larry Finger authored
The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. Signed-off-by:
-
Larry Finger authored
The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=63881. Signed-off-by:
Matthieu Baerts <matttbe@gmail.com> Cc: Stable <stable@vger.kernel.org> [3.0 +] Signed-off-by:
-
Mark Cave-Ayland authored
All of the rtlwifi drivers have an error in the routine that tests if the data is "special". If it is, the subsequant transmission will be at the lowest rate to enhance reliability. The 16-bit quantity is big-endian, but was being extracted in native CPU mode. One of the effects of this bug is to inhibit association under some conditions as the TX rate is too high. Based on suggestions by Joe Perches, the entire routine is rewritten. One of the local headers contained duplicates of some of the ETH_P_XXX definitions. These are deleted. Signed-off-by:
-
Janusz Dziedzic authored
Fix possible NULL (sc->dfs_detector) pointer dereference. Detected by Smatch: drivers/net/wireless/ath/ath9k/dfs_debug.c:67 read_file_dfs() error: we previously assumed 'sc->dfs_detector' could be null (see line 47) Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
-
Janusz Dziedzic authored
Use correct width enums when setup radar_detect_widths for DFS. Signed-off-by:
-
Stanislaw Gruszka authored
Since: commit 36323f81 Author: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Date: Mon Jul 23 21:33:42 2012 +0200 mac80211: move TX station pointer and restructure TX we do not pass sta pointer to rt2x00queue_create_tx_descriptor_ht(), hence we do not correctly set station WCID and AMPDU density parameters. Cc: stable@vger.kernel.org # 3.7+ Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
-
Wei Yongjun authored
Fix to return -ENODEV in the unknown model error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
-
Dan Carpenter authored
If we do a zero size allocation then it will oops. Also we can't be sure the user passes us a NUL terminated string so I've added a terminator. This code can only be triggered by root. Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
-
Colin Ian King authored
kmalloc on efuse_word can return null, leading to free'ing of elements in efuse_word on the error exit path even though it has not been allocated. Instead, don't free the elements of efuse_word if kmalloc failed. Also, kmalloc of any of the arrays in efuse_word[] can also fail, leading to undefined contents in the remaining elements leading to problems when free'ing these elements later on. So kzalloc efuse_word to ensure the kfree on the remaining elements won't cause breakage. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Amitkumar Karwar authored
While parsing TLVs, return failure if number of remaining bytes are less than current tlv length. This avoids invalid memory access. Signed-off-by:
-
Amitkumar Karwar authored
As tlv_buf_len is decremented at the end of the loop, we may have accessed invalid memory in the last iteration. Modify the while condition and add a break statement at the begining of the loop to fix the problem. Reported-by:
-
Amitkumar Karwar authored
With "while (length)" check we may end up in accessing invalid memory in last iteration. This patch makes sure that tlv length is not less than the length of structure mwifiex_power_group when min/max power is calculated. Reported-by:
-
Amitkumar Karwar authored
__le16 to u16 conversion is missing for "pg_tlv_hdr->length" in mwifiex_get_power_level(). This creates a problem on big endian machines. It is resolved by changing definition of the structure and making required endianness changes. Signed-off-by:
-
Dan Carpenter authored
Before we loop for next iteration we adjust the buffer pointer and "resp_len": curr += (tlv_len + sizeof(tlv_hdr->header)); resp_len -= (tlv_len + sizeof(tlv_hdr->header)); If "resp_len" gets set to negative then it counts as a high positive value. Signed-off-by:
-
Felipe Pena authored
There is a typo in the struct member name on assignment when checking rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40, the check uses pwrgroup_ht40 for bound limit and uses pwrgroup_ht20 when assigning instead. Signed-off-by:
Felipe Pena <felipensp@gmail.com> Acked-by:
-
