Pull block fixes from Jens Axboe:
 "Just two minor comment / documentation fixes for the block side"

* tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux:
  block: fix kernel-doc for disk_force_media_change()
  block: correct stale comment in rq_qos_wait

Pull io_uring fix from Jens Axboe:
 "A single fix going to stable for the IORING_OP_LINKAT flag handling"

* tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux:
  io_uring/fs: remove sqe->rw_flags checking from LINKAT

Pull slab fixes from Vlastimil Babka:

 - stable fix to prevent list corruption when destroying caches with
   leftover objects (Rafael Aquini)

 - fix for a gotcha in kmalloc_size_roundup() when calling it with too
   high size, discovered when recently a networking call site had to be
   fixed for a different issue (David Laight)

* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  slab: kmalloc_size_roundup() must not return 0 for non-zero size
  mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()

Pull drm fixes from Dave Airlie:
 "Regular pull, this feel suspiciously light so I expect next week might
  be a bit heavier? Let's see how we go. This is from a code point of
  view ivpu and i915 fixes.

  The only other patch is adding Danilo Krummrich to the nouveau
  maintainers, he's agreed to take on more of the roll after Ben
  retired.

  MAINTAINERS:
   - add Danilo for nouveau

  ivpu:
   - Add PCI ids for Arrow Lake
   - Fix memory corruption during IPC
   - Avoid dmesg flooding
   - 40xx: Wait for clock resource
   - 40xx: Fix interrupt usage
   - 40xx: Support caching when loading firmware

  i915:
   - Fix a panic regression on gen8_ggtt_insert_entries
   - Fix load issue due to reservation address in ggtt_reserve_guc_top
   - Fix a possible deadlock with guc busyness worker"

* tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm:
  accel/ivpu: Use cached buffers for FW loading
  accel/ivpu/40xx: Fix missing VPUIP interrupts
  accel/ivpu/40xx: Disable frequency change interrupt
  accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
  accel/ivpu: Don't flood dmesg with VPU ready message
  accel/ivpu: Do not use wait event interruptible
  MAINTAINERS: update nouveau maintainers
  i915/guc: Get runtime pm in busyness worker only if already active
  drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
  i915: Limit the length of an sg list to the requested length
  accel/ivpu: Add Arrow Lake pci id

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential spinlock deadlock in gpio-timberdale

 - mark the gpio-pmic-eic-sprd driver as one that can sleep

* tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
  gpio: timberdale: Fix potential deadlock on &tgpio->lock

Pull clk fixes from Stephen Boyd:
 "A bunch of clk driver fixes for issues found recently:

   - Fix the binding for versaclock3 that was introduced this merge
     window so we know what the values are for clk consumers

   - Fix a 64-bit division issue in the versaclock3 driver

   - Avoid breakage in the versaclock3 driver by rejiggering the enums
     used to layout clks

   - Fix the parent name of a clk in the Spreadtrum ums512 clk driver

   - Fix a suspend/resume issue in Skyworks Si521xx clk driver where
     regmap restoration fails because writes are wedged

   - Return zero from Tegra bpmp recalc_rate() implementation when an
     error occurs so we don't consider an error as a large rate"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: tegra: fix error return case for recalc_rate
  clk: si521xx: Fix regmap write accessor
  clk: si521xx: Use REGCACHE_FLAT instead of NONE
  clk: sprd: Fix thm_parents incorrect configuration
  clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
  clk: vc3: Fix output clock mapping
  clk: vc3: Fix 64 by 64 division
  dt-bindings: clock: versaclock3: Add description for #clock-cells property

Pull power supply fixes from Sebastian Reichel:

 - core: fix use after free during device release

 - ab8500: avoid reporting multiple batteries to userspace

 - rk817: fix DT node resource leak

 - misc. small fixes, mostly for compiler warnings/errors

* tag 'for-v6.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: rk817: Fix node refcount leak
  power: supply: core: fix use after free in uevent
  power: supply: rt9467: Fix rt9467_run_aicl()
  power: supply: rk817: Add missing module alias
  power: supply: ucs1002: fix error code in ucs1002_get_property()
  power: vexpress: fix -Wvoid-pointer-to-enum-cast warning
  power: reset: use capital "OR" for multiple licenses in SPDX
  pwr-mlxbf: extend Kconfig to include gpio-mlxbf3 dependency
  power: supply: rt5033_charger: recognize EXTCON setting
  power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo()
  power: supply: ab8500: Set typing and props

Pull Xtensa fixes from Max Filippov:

 - fix build warnings from builds performed with W=1

* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: boot/lib: fix function prototypes
  xtensa: umulsidi3: fix conditional expression
  xtensa: boot: don't add include-dirs
  xtensa: iss/network: make functions static
  xtensa: tlb: include <asm/tlb.h> for missing prototype
  xtensa: hw_breakpoint: include header for missing prototype
  xtensa: smp: add headers for missing function prototypes
  irqchip: irq-xtensa-mx: include header for missing prototype
  xtensa: traps: add <linux/cpu.h> for function prototype
  xtensa: stacktrace: include <asm/ftrace.h> for prototype
  xtensa: signal: include headers for function prototypes
  xtensa: processor.h: add init_arch() prototype
  xtensa: ptrace: add prototypes to <asm/ptrace.h>
  xtensa: irq: include <asm/traps.h>
  xtensa: fault: include <asm/traps.h>
  xtensa: add default definition for XCHAL_HAVE_DIV32

This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.

Fixes: cf30da90 ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'drm-intel-fixes-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix a panic regression on gen8_ggtt_insert_entries (Matthew Wilcox)
- Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello)
- Fix a possible deadlock with guc busyness worker (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRWMI1HmUYPGGylp@intel.com

Short summary of fixes pull:

 * ivpu:
   * Add PCI ids for Arrow Lake
   * Fix memory corruption during IPC
   * Avoid dmesg flooding
   * 40xx: Wait for clock resource
   * 40xx: Fix interrupt usage
   * 40xx: Support caching when loading firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928081208.GA7881@linux-uq9g

Pull spi fixes from Mark Brown:
 "A small set of device specific fixes, the most major one is for the
  GXP driver which would probably have been confusing some callers with
  returning the length rather than 0 on successful writes"

* tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-gxp: BUG: Correct spi write return value
  dt-bindings: spi: fsl-imx-cspi: Document missing entries
  spi: cs42l43: Remove spurious pm_runtime_disable

Merge tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix high_memory calculation and module loader errors with latest
  binutils"

* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Add support for 64_PCREL relocation type
  LoongArch: Add support for 32_PCREL relocation type
  LoongArch: Define relocation types for ABI v2.10
  LoongArch: numa: Fix high_memory calculation

Pull MIPS fix from Thomas Bogendoerfer:

 - fix Alchemy build with MMC support disabled

* tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

Pull SCSI fixes from James Bottomley:
 "A single fix for libata: older devices don't support command duration
  limits (CDL) and some don't support report opcodes, meaning there's no
  way to tell if they support the command or not.

  Reduce the problems of incorrectly using CDL commands on older devices
  by checking SCSI spec compliance at SPC-5 (the spec which introduced
  the command) before turning on CDL"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: ata: Do no try to probe for CDL on old drives

Pull VFIO fixes from Alex Williamson:

 - The new PDS vfio-pci variant driver only supports SR-IOV VF devices
   and incorrectly made a direct reference to the physfn field of the
   pci_dev.  Fix this both by making the Kconfig depend on IOV support
   as well as using the correct wrapper for this access (Shixiong Ou)

 - Resolve an error path issue where on unwind of the mdev registration
   the created kset is not unregistered and the wrong error code is
   returned (Jinjie Ruan)

* tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio:
  vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
  vfio/pds: Use proper PF device access helper
  vfio/pds: Add missing PCI_IOV depends

Bug fix to correct return value of gxp_spi_write function to zero.
Completion of succesful operation should return zero.

Fixes: 730bc8ba spi: spi-gxp: Add support for HPE GXP SoCs
Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.comSigned-off-by: Mark Brown <broonie@kernel.org>

When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:

  kmod: zsmalloc: Unknown relocation type 109
  kmod: fuse: Unknown relocation type 109
  kmod: fuse: Unknown relocation type 109
  kmod: radeon: Unknown relocation type 109
  kmod: nf_tables: Unknown relocation type 109
  kmod: nf_tables: Unknown relocation type 109

This is because the latest upstream binutils replaces a pair of ADD64
and SUB64 with 64_PCREL, so add support for 64_PCREL relocation type.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:

  kmod: zsmalloc: Unsupport relocation type 99, please add its support.
  kmod: fuse: Unsupport relocation type 99, please add its support.
  kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
  kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
  kmod: pstore: Unsupport relocation type 99, please add its support.
  kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
  kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
  kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
  kmod: fuse: Unsupport relocation type 99, please add its support.
  kmod: fat: Unsupport relocation type 99, please add its support.

This is because the latest upstream binutils replaces a pair of ADD32
and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The relocation types from 101 to 109 are used by GNU binutils >= 2.41,
add their definitions to use them in later patches.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

For 64bit kernel without HIGHMEM, high_memory is the virtual address of
the highest physical address in the system. But __va(get_num_physpages()
<< PAGE_SHIFT) is not what we want for high_memory because there may be
holes in the physical address space. On the other hand, max_low_pfn is
calculated from memblock_end_of_DRAM(), which is exactly corresponding
to the highest physical address, so use it for high_memory calculation.

Cc: <stable@vger.kernel.org>
Fixes: d4b6f156 ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.

This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.

Fixes: 348f3cde ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.

timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
   --> timbgpio_irq_disable()
   --> spin_lock_irqsave(&tgpio->lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Create buffers with cache coherency on the CPU side (write-back) while
disabling snooping on the VPU side. These buffers require an explicit
cache flush after each CPU-side modification.

Configuring pages as write-combined may introduce significant delays,
potentially taking hundreds of milliseconds for 64 MB buffers.

Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the
VPU side. Allocate FW runtime memory buffer (64 MB) as cached with
snooping-disabled.

This fixes random long FW loading times and boot params memory
corruption on warmboot (due to missed wmb).

Fixes: 02d5b0aa ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com

Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.

Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.

Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com

Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.

FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.

FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.

Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com

We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.

Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.

Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com

Use ivpu_dbg() to print the VPU ready message so it doesn't pollute
the dmesg.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com

If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:

[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0

To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.

Fixes: 5d7422cf ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com

Since I will continue to work on Nouveau consistently, also beyond my
former and still ongoing VM_BIND/EXEC work, add myself to the list of
Nouveau maintainers.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926014913.7721-1-dakr@redhat.com

Pull workqueue fixes from Tejun Heo:

 - Remove double allocation of wq_update_pod_attrs_buf

 - Fix missing allocation of pwq_release_worker when
   wq_cpu_intensive_thresh_us is set to a custom value

* tag 'wq-for-6.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix missed pwq_release_worker creation in wq_cpu_intensive_thresh_init()
  workqueue: Removed double allocation of wq_update_pod_attrs_buf

Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.

The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.

Note:
- We do not requeue the worker if we cannot take a reference to runtime
  pm since intel_guc_busyness_unpark would requeue the worker in the
  resume path.

- If the gt was parked longer than time taken for GT timestamp to roll
  over, we ignore those rollovers since we don't care about tracking the
  exact GT time. We only care about roll overs when the gt is active and
  running workloads.

- There is a window of time between gt_park and runtime suspend, where
  the worker may run. This is acceptable since the worker will not find
  any new data to update busyness.

v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag

v3: (Daniele)
- Reword commit and comments and add details

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054 ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit e2f99b79)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d9
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:

i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28

Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.

Fixes: 91180076 ("drm/i915/uc: Reserve upper range of GGTT")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
(cherry picked from commit 0f3fa942)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter.  gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.

Clamp the length of the last entry in the sg list to be the expected
length.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 0b62af28 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9256
Link: https://lore.kernel.org/lkml/6287208.lOV4Wx5bFT@natalenko.name/Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919194855.347582-1-willy@infradead.org
(cherry picked from commit 26a8e32e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Pull btrfs fixes from David Sterba:

 - delayed refs fixes:
     - fix race when refilling delayed refs block reserve
     - prevent transaction block reserve underflow when starting
       transaction
     - error message and value adjustments

 - fix build warnings with CONFIG_CC_OPTIMIZE_FOR_SIZE and
   -Wmaybe-uninitialized

 - fix for smatch report where uninitialized data from invalid extent
   buffer range could be returned to the caller

 - fix numeric overflow in statfs when calculating lower threshold
   for a full filesystem

* tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: initialize start_slot in btrfs_log_prealloc_extents
  btrfs: make sure to initialize start and len in find_free_dev_extent
  btrfs: reset destination buffer when read_extent_buffer() gets invalid range
  btrfs: properly report 0 avail for very full file systems
  btrfs: log message if extent item not found when running delayed extent op
  btrfs: remove redundant BUG_ON() from __btrfs_inc_extent_ref()
  btrfs: return -EUCLEAN for delayed tree ref with a ref count not equals to 1
  btrfs: prevent transaction block reserve underflow when starting transaction
  btrfs: fix race when refilling delayed refs block reserve

Merge tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "One single fix to unmount tracefs when test created mount"

* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/user_events: Fix to unmount tracefs when test created mount

Pull vfs fixes from Christian Brauner:
 "This contains the usual miscellaneous fixes and cleanups for vfs and
  individual fses:

  Fixes:
   - Revert ki_pos on error from buffered writes for direct io fallback
   - Add missing documentation for block device and superblock handling
     for changes merged this cycle
   - Fix reiserfs flexible array usage
   - Ensure that overlayfs sets ctime when setting mtime and atime
   - Disable deferred caller completions with overlayfs writes until
     proper support exists

  Cleanups:
   - Remove duplicate initialization in pipe code
   - Annotate aio kioctx_table with __counted_by"

* tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
  overlayfs: set ctime when setting mtime and atime
  ntfs3: put resources during ntfs_fill_super()
  ovl: disable IOCB_DIO_CALLER_COMP
  porting: document superblock as block device holder
  porting: document new block device opening order
  fs/pipe: remove duplicate "offset" initializer
  fs-writeback: do not requeue a clean inode having skipped pages
  aio: Annotate struct kioctx_table with __counted_by
  direct_write_fallback(): on error revert the ->ki_pos update from buffered write
  reiserfs: Replace 1-element array with C99 style flex-array

Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "Build:

   - Update header files in the tools/**/include directory to sync with
     the kernel sources as usual.

   - Remove unused bpf-prologue files. While it's not strictly a fix,
     but the functionality was removed in this cycle so better to get
     rid of the code together.

   - Other minor build fixes.

  Misc:

   - Fix uninitialized memory access in PMU parsing code

   - Fix segfaults on software event"

* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf jevent: fix core dump on software events on s390
  perf pmu: Ensure all alias variables are initialized
  perf jevents metric: Fix type of strcmp_cpuid_str
  perf trace: Avoid compile error wrt redefining bool
  perf bpf-prologue: Remove unused file
  tools headers UAPI: Update tools's copy of drm.h headers
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
  tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
  tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
  perf tools: Update copy of libbpf's hashmap.c

Drop one function parameter's kernel-doc comment since the parameter
was removed. This prevents a kernel-doc warning:

block/disk-events.c:300: warning: Excess function parameter 'events' description in 'disk_force_media_change'

Fixes: ab6860f6 ("block: simplify the disk_force_media_change interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202309060957.vfl0mUur-lkp@intel.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230926005232.23666-1-rdunlap@infradead.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Nathan reported that he was seeing the new warning in
setattr_copy_mgtime pop when starting podman containers. Overlayfs is
trying to set the atime and mtime via notify_change without also
setting the ctime.

POSIX states that when the atime and mtime are updated via utimes() that
we must also update the ctime to the current time. The situation with
overlayfs copy-up is analogies, so add ATTR_CTIME to the bitmask.
notify_change will fill in the value.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230913-ctime-v1-1-c6bc509cbc27@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>