In case nvme_rdma_wait_for_cm timeout expires before we get
an established or rejected event (rdma_connect succeeded) from
rdma_cm, we end up with leaking the ib transport resources for
dedicated queue. This scenario can easily reproduced using traffic
test during port toggling.
Also, in order to protect from parallel ib queue destruction, that
may be invoked from different context's, introduce new flag that
stands for transport readiness. While we're here, protect also against
a situation that we can receive rdma_cm events during ib queue destruction.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently, blk_mq_tagset_iter() iterate over initial hctx tags only.  If
an I/O scheduler is used, it doesn't iterate the hctx scheduler tags and
the static request aren't been updated. For example, while using NVMe
over Fabrics RDMA host, this cause us not to reinit the scheduler
requests and thus not re-register all the memory regions during the
tagset re-initialization in the reconnect flow.

This may lead to a memory registration error:

  "MEMREG for CQE 0xffff88044c14dce8 failed with status memory management operation error (6)"

With this commit we don't need to reinit the requests, and thus fix this
failure.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If we got a remote invalidation on a bogus rkey, this is a protocol error.
Fail the connection in this case.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We must not complete a request before the host memory region is
invalidated.  Luckily we have send with invalidate protocol support so
we usually don't need to execute it, but in case the target did not
invalidate a memory region for us, we must wait for the invalidation to
complete before unmapping host memory and completing the I/O.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In order to guarantee that the HCA will never get an access violation
(either from invalidated rkey or from iommu) when retrying a send
operation we must complete a request only when both send completion and
the nvme cqe has arrived. We need to set the send/recv completions flags
atomically because we might have more than a single context accessing the
request concurrently (one is cq irq-poll context and the other is
user-polling used in IOCB_HIPRI).

Only then we are safe to invalidate the rkey (if needed), unmap the host
buffers, and complete the IO.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The entire completions suppress mechanism is currently broken because the
HCA might retry a send operation (due to dropped ack) after the nvme
transaction has completed.

In order to handle this, we signal all send completions and introduce a
separate done handler for async events as they will be handled differently
(as they don't include in-capsule data by definition).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.

This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When we send a read request and hit the clean data in cache device, there
is a situation called cache read race in bcache(see the commit in the tail
of cache_look_up(), the following explaination just copy from there):
The bucket we're reading from might be reused while our bio is in flight,
and we could then end up reading the wrong data. We guard against this
by checking (in bch_cache_read_endio()) if the pointer is stale again;
if so, we treat it as an error (s->iop.error = -EINTR) and reread from
the backing device (but we don't pass that error up anywhere)

It should be noted that cache read race happened under normal
circumstances, not the circumstance when SSD failed, it was counted
and shown in  /sys/fs/bcache/XXX/internal/cache_read_races.

Without this patch, when we use writeback mode, we will never reread from
the backing device when cache read race happened, until the whole cache
device is clean, because the condition
(s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in
cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR)
will be passed up, at last, user will receive -EINTR when it's bio end,
this is not suitable, and wield to up-application.

In this patch, we use s->read_dirty_data to judge whether the read
request hit dirty data in cache device, it is safe to reread data from
the backing device when the read request hit clean data. This can not
only handle cache read race, but also recover data when failed read
request from cache device.

[edited by mlyle to fix up whitespace, commit log title, comment
spelling]

Fixes: d59b2379 ("bcache: only permit to recovery read error when cache device is clean")
Cc: <stable@vger.kernel.org> # 4.14
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the PTR macro, which conflicts with the PTR macro
in include/uapi/linux/bcache.h.

[fixed by mlyle: corrected a line-length issue]

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Journal bucket is a circular buffer, the bucket
can be like YYYNNNYY, which means the first valid journal in
the 7th bucket, and the latest valid journal in third bucket, in
this case, if we do not try we the zero index first, We
may get a valid journal in the 7th bucket, then we call
find_next_bit(bitmap,ca->sb.njournal_buckets, l + 1) to get the
first invalid bucket after the 7th bucket, because all these
buckets is valid, so no bit 1 in bitmap, thus find_next_bit()
function would return with ca->sb.njournal_buckets (8). So, after
that, bcache only read journal in 7th and 8the bucket,
the first to the third buckets are lost.

So, it is important to let developer know that, we need to try
the zero index at first in the hash-search, and avoid any breaks
in future's code modification.

[ML: Fixed whitespace & formatting & file permissions]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

So far harmless, but it's confusing and a bug waiting to happen if the
shifts grow larger than 4.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

wbt_done call wbt_clear_stat no matter current stat was tracked
or not, move it to common place.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

wbt_init doesn't set q->rq_wb to NULL, if wbt_init return 0,
so check return value is enough, remove NULL checking.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

rwb->wc and rwb->queue_depth were overwritten by wbt_set_write_cache and
wbt_set_queue_depth, remove the default setting.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"A couple nvme fixes for 4.15:

 - expand the queue ready fix that we only had for RDMA to also cover FC and
   loop by moving it to common code (Sagi)
 - fix an array out of bounds in the PCIe HMB code (Minwoo Im)
 - two new device quirks (Jeff Lien and Kai-Heng Feng)
 - static checkers fixes (Keith Busch)
 - FC target refcount fix (James Smart)
 - A trivial spelling fix in new code (Colin Ian King)"

And increase the existing delay to cover this device as well.

Cc: stable@vger.kernel.org
Signed-off-by: Jeff Lien <jeff.lien@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove useless assignment to the variable "split" because the variable is
unconditionally assigned later.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_alloc_dev() allocates memory for dev->badblocks, but cleanup
currently only occurs in the configfs release codepath, missing a number
of other places.

This bug was found running the blktests block/010 test, alongside
kmemleak:
rapido1:/blktests# ./check block/010
...
rapido1:/blktests# echo scan > /sys/kernel/debug/kmemleak
[  306.966708] kmemleak: 32 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
rapido1:/blktests# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff88001f86d000 (size 4096):
  comm "modprobe", pid 231, jiffies 4294892415 (age 318.252s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814b0379>] kmemleak_alloc+0x49/0xa0
    [<ffffffff810f180f>] kmem_cache_alloc+0x9f/0xe0
    [<ffffffff8124e45f>] badblocks_init+0x2f/0x60
    [<ffffffffa0019fae>] 0xffffffffa0019fae
    [<ffffffffa0021273>] nullb_device_badblocks_store+0x63/0x130 [null_blk]
    [<ffffffff810004cd>] do_one_initcall+0x3d/0x170
    [<ffffffff8109fe0d>] do_init_module+0x56/0x1e9
    [<ffffffff8109ebd7>] load_module+0x1c47/0x26a0
    [<ffffffff8109f819>] SyS_finit_module+0xa9/0xd0
    [<ffffffff814b4f60>] entry_SYSCALL_64_fastpath+0x13/0x94

Fixes: 2f54a613 ("nullb: badbblocks support")
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Whenever a cmd is received a reference is taken while looking up the
queue. The reference is removed after the cmd is done as the iod is
returned for reuse. The fod may be reused for a deferred (recevied but
no job context) cmd.  Existing code removes the reference only if the
fod is not reused for another command. Given the fod may be used for
one or more ios, although a reference was taken per io, it won't be
matched on the frees.

Remove the reference on every fod free. This pairs the references to
each io.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The ns->head is always valid, so we don't need to check for NULL.
Reported-by: Dan Carpenter <dan.caprenter@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This fixes using the NULL 'head' before getting the reference. It is
however possible the head will always be NULL, so this patch uses the
struct nvme_ns to get the ns_id field.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Trivial fix to spelling mistake in dev_warn_ratelimited message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

hmb descriptor idx out-of-bound occurs in case of below conditions.
preferred = 128MiB
chunk_size = 4MiB
hmmaxd = 1

Current code will not allow rmmod which will free hmb descriptors
to be done successfully in above case.

"descs[i]" will be set in for-loop without seeing any conditions
related to "max_entries" after a single "descs" was allocated by
(max_entries = 1) in this case.

Added a condition into for-loop to check index of descriptors.

Fixes: 044a9df1("nvme-pci: implement the HMB entry number and size limitations")
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The NVMe device in question drops off the PCIe bus after system suspend.
I've tried several approaches to workaround this issue, but none of them
works:
- NVME_QUIRK_DELAY_BEFORE_CHK_RDY
- NVME_QUIRK_NO_DEEPEST_PS
- Disable APST before controller shutdown
- Delay between controller shutdown and system suspend
- Explicitly set power state to 0 before controller shutdown

Fortunately it's a desktop, so disable APST won't hurt the battery.

Also, change the quirk function name to reflect it's for vendor
combination quirks.

BugLink: https://bugs.launchpad.net/bugs/1705748Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In case the queue is not LIVE (fully functional and connected at the nvmf
level), we cannot allow any commands other than connect to pass through.

Add a new queue state flag NVME_LOOP_Q_LIVE which is set after nvmf connect
and cleared in queue teardown.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In case the queue is not LIVE (fully functional and connected at the nvmf
level), we cannot allow any commands other than connect to pass through.

Add a new queue state flag NVME_FC_Q_LIVE which is set after nvmf connect
and cleared in queue teardown.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When the fabrics queue is not alive and fully functional, no commands
should be allowed to pass but connect (which moves the queue to a fully
functional state). Any other command should be failed, with either
temporary status BLK_STS_RESOUCE or permanent status BLK_STS_IOERR.

This is shared across all fabrics, hence move the check to fabrics
library.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We always pass in blk_trace_bio_get_cgid(q, bio) to blk_add_trace_bio().
Since both are readily available in the function already, kill the
argument.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>

Rewrote commit message.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fix typo in error message.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

device_add_disk need do more safety error handle, so this patch just
add WARN_ON.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>

Adapted for current series by me.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In order to make error handle more cleaner we call bdi_debug_register
before set state to WB_registered, that we can avoid call bdi_unregister
in release_bdi().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Convert bdi_debug_register to int and then do error handle for it.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The updates this merge window added several bogus default enablement for
new features.  We don't do that.  If people want new behavior, they ask
for it.

One 'default n' was also removed as pointless.  That's great, but there
were eight other ones in the same file that were left alone.

Fix it up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull nfsd updates from Bruce Fields:
 "Lots of good bugfixes, including:

   -  fix a number of races in the NFSv4+ state code

   -  fix some shutdown crashes in multiple-network-namespace cases

   -  relax our 4.1 session limits; if you've an artificially low limit
      to the number of 4.1 clients that can mount simultaneously, try
      upgrading"

* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
  SUNRPC: Improve ordering of transport processing
  nfsd: deal with revoked delegations appropriately
  svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
  nfsd: use nfs->ns.inum as net ID
  rpc: remove some BUG()s
  svcrdma: Preserve CB send buffer across retransmits
  nfds: avoid gettimeofday for nfssvc_boot time
  fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
  fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
  fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
  lockd: double unregister of inetaddr notifiers
  nfsd4: catch some false session retries
  nfsd4: fix cached replies to solo SEQUENCE compounds
  sunrcp: make function _svc_create_xprt static
  SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
  nfsd: use ARRAY_SIZE
  nfsd: give out fewer session slots as limit approaches
  nfsd: increase DRC cache limit
  nfsd: remove unnecessary nofilehandle checks
  nfs_common: convert int to bool
  ...

Pull x86 platform driver updates from Andy Shevchenko:
 "Here is the collected material against Platform Drivers x86 subsystem.
  It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver
  activity

  For this cycle we have quite an update for the Dell SMBIOS driver
  including WMI work to provide an interface for SMBIOS tokens via sysfs
  and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
  split into a separate driver followed by a new WMI dispatcher. The
  latter provides a character device interface to user space.

  The git history also contains a merge of immutable branch from Wolfram
  Sang in order to apply a dependent fix to the Intel CherryTrail
  Battery Management driver.

  Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
  support is added for Intel Skylake.

  Peaq WMI hotkeys driver gets its own maintainer and white list of
  supported models.

  Silead DMI is expanded to support few additional platforms.

  Tablet mode via GMMS ACPI method is added to support some ThinkPad
  tablets.

  new driver:
   - Add driver to force WMI Thunderbolt controller power status

  asus-wmi:
   -  Add lightbar led support

  dell-laptop:
   -  Allocate buffer before rfkill use

  dell-smbios:
   -  fix string overflow
   -  Add filtering support
   -  Introduce dispatcher for SMM calls
   -  Add a sysfs interface for SMBIOS tokens
   -  only run if proper oem string is detected
   -  Prefix class/select with cmd_
   -  Add pr_fmt definition to driver

  dell-smbios-smm:
   -  test for WSMT

  dell-smbios-wmi:
   -  release mutex lock on WMI call failure
   -  introduce userspace interface
   -  Add new WMI dispatcher driver

  dell-smo8800:
   -  remove redundant assignments to byte_data

  dell-wmi:
   -  don't check length returned
   -  clean up wmi descriptor check
   -  increase severity of some failures
   -  Do not match on descriptor GUID modalias
   -  Label driver as handling notifications

  dell-*wmi*:
   -  Relay failed initial probe to dependent drivers

  dell-wmi-descriptor:
   -  check if memory was allocated
   -  split WMI descriptor into it's own driver

  fujitsu-laptop:
   -  Fix radio LED detection
   -  Don't oops when FUJ02E3 is not presnt

  hp_accel:
   -  Add quirk for HP ProBook 440 G4

  hp-wmi:
   -  Fix tablet mode detection for convertibles

  ideapad-laptop:
   -  Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list

  intel_cht_int33fe:
   -  Update fusb302 type string, add properties
   -  make a couple of local functions static
   -  Work around BIOS bug on some devices

  intel-hid:
   -  Power button suspend on Dell Latitude 7275

  intel_ips:
   -  Convert timers to use timer_setup()
   -  Remove FSF address from GPL notice
   -  Remove unneeded fields and label
   -  Keep pointer to struct device
   -  Use PCI_VDEVICE() macro
   -  Switch to new PCI IRQ allocation API
   -  Simplify error handling via devres API

  intel_pmc_ipc:
   -  Revert Use MFD framework to create dependent devices
   -  Use MFD framework to create dependent devices
   -  Use spin_lock to protect GCR updates
   -  Use devm_* calls in driver probe function

  intel_punit_ipc:
   -  Fix resource ioremap warning

  intel_telemetry:
   -  Remove useless default in Kconfig
   -  Add needed inclusion
   -  cleanup redundant headers
   -  Fix typos
   -  Fix load failure info

  intel_telemetry_debugfs:
   -  Use standard ARRAY_SIZE() macro

  intel_turbo_max_3:
   -  Add Skylake platform

  intel-wmi-thunderbolt:
   -  Silence error cases

  mlx-platform:
   -  make a couple of structures static

  peaq_wmi:
   -  Fix missing terminating entry for peaq_dmi_table

  peaq-wmi:
   -  Remove unnecessary checks from peaq_wmi_exit
   -  Add DMI check before binding to the WMI interface
   -  Revert Blacklist Lenovo ideapad 700-15ISK
   -  Blacklist Lenovo ideapad 700-15ISK

  silead_dmi:
   -  Add silead, home-button property to some tablets
   -  Add entry for the Digma e200 tablet
   -  Fix GP-electronic T701 entry
   -  Add entry for the Chuwi Hi8 Pro tablet

  sony-laptop:
   -  Drop variable assignment in sony_nc_setup_rfkill()
   -  Fix error handling in sony_nc_setup_rfkill()

  thinkpad_acpi:
   -  Implement tablet mode using GMMS method

  tools/wmi:
   -  add a sample for dell smbios communication over WMI

  wmi:
   -  release mutex on module acquistion failure
   -  create userspace interface for drivers
   -  Don't allow drivers to get each other's GUIDs
   -  Add new method wmidev_evaluate_method
   -  Destroy on cleanup rather than unregister
   -  Cleanup exit routine in reverse order of init
   -  Sort include list"

* tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: silead_dmi: Add silead, home-button property to some tablets
  platform/x86: dell-laptop: Allocate buffer before rfkill use
  platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
  platform/x86: dell-wmi-descriptor: check if memory was allocated
  platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
  platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
  platform/x86: wmi: release mutex on module acquistion failure
  platform/x86: dell-smbios: fix string overflow
  platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
  platform/x86: intel_punit_ipc: Fix resource ioremap warning
  platform/x86: dell-smo8800: remove redundant assignments to byte_data
  platform/x86: hp-wmi: Fix tablet mode detection for convertibles
  platform/x86: intel_ips: Convert timers to use timer_setup()
  platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
  platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
  tools/wmi: add a sample for dell smbios communication over WMI
  platform/x86: dell-smbios-wmi: introduce userspace interface
  platform/x86: wmi: create userspace interface for drivers
  platform/x86: dell-smbios: Add filtering support
  platform/x86: dell-smbios-smm: test for WSMT
  ...

Add "silead,home-button" property to entries for tablets which have
a capacitive home button (typically a windows logo on the front).

This new property is checked for by the new capacitive home button
support in the silead touchscreen driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull sparc updates from David Miller:

 1) Add missing cmpxchg64() for 32-bit sparc.

 2) Timer conversions from Allen Pais and Kees Cook.

 3) vDSO support, from Nagarathnam Muthusamy.

 4) Fix sparc64 huge page table walks based upon bug report by Al Viro,
    from Nitin Gupta.

 5) Optimized fls() for T4 and above, from Vijay Kumar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix page table walk for PUD hugepages
  sparc64: Convert timers to user timer_setup()
  sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t
  sparc/led: Convert timers to use timer_setup()
  sparc64: Use sparc optimized fls and __fls for T4 and above
  sparc64: SPARC optimized __fls function
  sparc64: SPARC optimized fls function
  sparc64: Define SPARC default __fls function
  sparc64: Define SPARC default fls function
  vDSO for sparc
  sparc32: Add cmpxchg64().
  sbus: char: Move D7S_MINOR to include/linux/miscdevice.h
  sparc: time: Remove unneeded linux/miscdevice.h include
  sparc64: mmu_context: Add missing include files

Pull networking fixes from David Miller:

 1) Revert regression inducing change to the IPSEC template resolver,
    from Steffen Klassert.

 2) Peeloffs can cause the wrong sk to be waken up in SCTP, fix from Xin
    Long.

 3) Min packet MTU size is wrong in cpsw driver, from Grygorii Strashko.

 4) Fix build failure in netfilter ctnetlink, from Arnd Bergmann.

 5) ISDN hisax driver checks pnp_irq() for errors incorrectly, from
    Arvind Yadav.

 6) Fix fealnx driver build failure on MIPS, from Huacai Chen.

 7) Fix into leak in SCTP, the scope_id of socket addresses is not
    always filled in. From Eric W. Biederman.

 8) MTU inheritance between physical function and representor fix in nfp
    driver, from Dirk van der Merwe.

 9) Fix memory leak in rsi driver, from Colin Ian King.

10) Fix expiration and generation ID handling of cached ipv4 redirect
    routes, from Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  net: usb: hso.c: remove unneeded DRIVER_LICENSE #define
  ibmvnic: fix dma_mapping_error call
  ipvlan: NULL pointer dereference panic in ipvlan_port_destroy
  route: also update fnhe_genid when updating a route cache
  route: update fnhe_expires for redirect when the fnhe exists
  sctp: set frag_point in sctp_setsockopt_maxseg correctly
  rsi: fix memory leak on buf and usb_reg_buf
  net/netlabel: Add list_next_rcu() in rcu_dereference().
  nfp: remove false positive offloads in flower vxlan
  nfp: register flower reprs for egress dev offload
  nfp: inherit the max_mtu from the PF netdev
  nfp: fix vlan receive MAC statistics typo
  nfp: fix flower offload metadata flag usage
  virto_net: remove empty file 'virtio_net.'
  net/sctp: Always set scope_id in sctp_inet6_skb_msgname
  fealnx: Fix building error on MIPS
  isdn: hisax: Fix pnp_irq's error checking for setup_teles3
  isdn: hisax: Fix pnp_irq's error checking for setup_sedlbauer_isapnp
  isdn: hisax: Fix pnp_irq's error checking for setup_niccy
  isdn: hisax: Fix pnp_irq's error checking for setup_ix1micro
  ...

Pull hwspinlock update from Bjorn Andersson:
 "This changes the HWSPINLOCK core Kconfig option to bool, to aid when
  other core code depends on it"

* tag 'hwlock-v4.15' of git://github.com/andersson/remoteproc:
  hwspinlock: Change hwspinlock to a bool