- 18 Jul, 2018 11 commits
-
-
Jerome Brunet authored
Add the DT bindings documentation for axg's SPDIF output. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
Add the capture memory interface of Amlogic's axg SoCs. TDM, SPDIF or PDM input devices place audio samples inside this FIFO. The FIFO content is then pushed to DDR Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
Amlogic's axg SoCs have two types of fifos which are the memory interfaces of the audio subsystem. FRDDR provides the playback interface while TODDR provides the capture interface. The way these fifos operate is very similar. Only a few settings are specific to each. They implement the same pcm driver here and the specifics of each will be dealt with the related DAI driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
Add the DT bindings documentation for axg's FIFOs: TODDR and FRDDR. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Sriram Periyasamy authored
Add documentation for power management of HDAC HDMI codec device for various scenarios such as S0/S3, probe and playback use case. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
This patch aims at achieving dynamic behaviour of audio card when the dependent components disappear and reappear. With this patch the card is removed if any of the dependent component is removed and card is added back if the dependent component comes back. All this is done using component framework and matching based on component name. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 16 Jul, 2018 3 commits
-
-
Agrawal, Akshu authored
Having interrupts enabled for ACP<->SYSMEM DMA transfer, we are in for an interrupt storm. For both playback and capture interrupts should be enabled for I2S<->ACP DMA. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Agrawal, Akshu authored
Earlier, ch1 was used to define ACP-SYSMEM transfer and ch2 for ACP-I2S transfer. With recent patches ch1 is used to define channel order number 1 and ch2 as channel order number 2. Thus, Playback: ch1:SYSMEM->ACP ch2:ACP->I2S Capture: ch1:I2S->ACP ch1:ACP->SYSMEM Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Naveen Manohar authored
Patch adds Geminilake I2S machine driver which uses following codecs: RT5682 and MAX98357A. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 13 Jul, 2018 2 commits
-
-
Jerome Brunet authored
When the component does not match the configuration table provided by the card, let soc-core check the component node for a name prefix Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 11 Jul, 2018 2 commits
-
-
Jerome Brunet authored
As done for format and channels, add the possibility to merge the backend rates on the frontend rates. This useful if the backend does not support all rates supported by the frontend, or if several backends (cpu and codecs) with different capabilities are connected to the same frontend. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
The goal of this patch is to simplify a bit dpcm runtime stream merge by removing several local variables. ATM, merge functions return the BE 'filter' values which should then be filtered against the FE stream values. This create a lot of local variable and unnecessary init of min and max. Instead of this, we can pass the FE stream values directly and let the BE filtering functions perform the merge 'in-place' Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Jul, 2018 9 commits
-
-
Hans de Goede authored
Enable reporting of button presses now that the codec driver recently has gotten support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Disable jack-detection and thus the codec IRQ over suspend/resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Enable button press detection for headsets by using the ovcd IRQ to get notified of button presses. This is modelled after (almost exactly copied from) the button press code for the rt5640 which has identical ovcd hardware. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Allow the machine driver to disable jack-detect over a suspend/resume by calling snd_soc_component_set_jack(NULL). Note this renames rt5651_set_jack, where all the jack-enable work was done to rt5651_enable_jack_detect. This function can now no longer fail as it does not request the IRQ anymore. It can still be passed an invalid jack source, but that should never happen, so this is now logged and treated as no jack source. Cc: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
On removal we must free the IRQ *before* cancelling the jack-detect work, so that the jack-detect work cannot be rescheduled by the IRQ. Before this commit we were cancelling the jack-detect work from the driver remove callback, while relying on devm to free the IRQ, which happens after the remove callback. This is the wrong order. This commit uses a devm-action to register a devm callback which cancels the work, before requesting the IRQ (devm tears things down in reverse order). This also allows us to remove the now empty remove driver callback. Cc: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
The rt5651 does not have a built-in speaker amplifier, so it is often used together with an external amplifier. On Cherry Trail boards this external amplifier's enable pin is driven through a GPIO, which is given as the first GPIO in the ACPI resources of the codec fwnode. This commit adds support to the bytcr_rt5651 for this GPIO, fixing the speaker not working on CHT devices with a rt5651 codec. Cc: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Move the getting of the codec_dev, to add device-props to it, out of byt_rt5651_add_codec_device_props() and into its caller, snd_byt_rt5651_mc_probe(). This is a preparation patch for adding support for an external amplifier enable GPIO, which requires further accesses to the codec_dev. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Remove is_valleyview helper, this is not necessary, we can simply call x86_match_cpu() directly instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Add a quirk for the Lenovo Miix2 8 tablet, this tablet uses a digital mic on DMIC1 and has a mono-speaker. The jack-detect uses the default settings.. Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 09 Jul, 2018 3 commits
-
-
Lars-Peter Clausen authored
The playback DAI is connected to the DSP and the DSP might be sourcing signals from the playback stream. Add a DAPM route between the two to make sure that the playback DAI is powered up, when the DSP is active. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
For the moment, we can't enable CONFIG_SND_PXA_SOC_SSP unless we are building for ARM PXA or MMP: WARNING: unmet direct dependencies detected for PXA_SSP Depends on [n]: PLAT_PXA [=n] Selected by [y]: - SND_PXA_SOC_SSP [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] This adds an explicit dependency for it. Fixes: 0a94cf34 ("ASoC: pxa: make SND_PXA2XX_SOC_I2S selectable") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
benjamin.gaignard@linaro.org authored
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Jul, 2018 4 commits
-
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: 256 * fs * 2 * mclk_src_scaling[i].param Addresses-Coverity-ID: 1432039 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
Allow setting a clock called 'extclk' in the device of the ssp-dai device. If specified, this clock will be set to the mclk rate from the DAI's .set_sysclk() callback. The DAI will also configure itself to use that external clock. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Andrew Gabbasov authored
To comply with the style of all kernel messages, add newline to the end of every message. Fixes: 70fb1052 ("ASoC: rsnd: add MIX (Mixer) support") Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: rate[index] * txclk_df * 64 Addresses-Coverity-ID: 1222129 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Jul, 2018 6 commits
-
-
Srinivas Kandagatla authored
num_channels for slim dais are aready set int set_channel_map, do not overwrite them in hw_params. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
This patch add routings mixer controls for slim rx ports. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
This patch adds support to SLIMbus TX dais in AFE module. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Existing code already has support for SLIMbus TX and RX, only thing that was missing from TX side was mapping between virtual to actual DSP port ids. This patch adds those mappings. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
The XRUN trigger from the driver should be done via snd_pcm_stop_xrun(). It simplifies the locking as well. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
The XRUN trigger from the driver should be done via snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-