Pull a regmap kconfig dependency fix from Mark Brown:
 "Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core

  Fixes a missing select from the Palmas driver a bit more throoughly."

* tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Use select .. if to get IRQ_DOMAIN enabled

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...

Merge tag 'ktest-v3.5-spelling' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull trivial ktest spelling fix from Steven Rostedt:
 "I promised Jesper that I would push this for 3.5, but forgot to add it
  to my queue.  It's just a spelling fix, but it should go in regardless
  to hide my inability to get words in the English language correct."

Becuse gud spealing is impurtunt.

* tag 'ktest-v3.5-spelling' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Change singular "paranthesis" to plural "parentheses"

Merge branches 'perf-urgent-for-linus' and 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:

 - Leftover AMD PMU driver fix fix from the end of the v3.4
   stabilization cycle.

 - Late tools/perf/ changes that missed the first round:
    * endianness fixes
    * event parsing improvements
    * libtraceevent fixes factored out from trace-cmd
    * perl scripting engine fixes related to libtraceevent,
    * testcase improvements
    * perf inject / pipe mode fixes
    * plus a kernel side fix

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Update event scheduling constraints for AMD family 15h models

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "sched, perf: Use a single callback into the scheduler"
  perf evlist: Show event attribute details
  perf tools: Bump default sample freq to 4 kHz
  perf buildid-list: Work better with pipe mode
  perf tools: Fix piped mode read code
  perf inject: Fix broken perf inject -b
  perf tools: rename HEADER_TRACE_INFO to HEADER_TRACING_DATA
  perf tools: Add union u64_swap type for swapping u64 data
  perf tools: Carry perf_event_attr bitfield throught different endians
  perf record: Fix documentation for branch stack sampling
  perf target: Add cpu flag to sample_type if target has cpu
  perf tools: Always try to build libtraceevent
  perf tools: Rename libparsevent to libtraceevent in Makefile
  perf script: Rename struct event to struct event_format in perl engine
  perf script: Explicitly handle known default print arg type
  perf tools: Add hardcoded name term for pmu events
  perf tools: Separate 'mem:' event scanner bits
  perf tools: Use allocated list for each parsed event
  perf tools: Add support for displaying event parser debug info
  perf test: Move parse event automated tests to separated object

Pull Itanium fixes from Tony Luck.

* tag 'ia64-3.5-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Liberate the signal layer from IA64 assembler
  [IA64] Add cmpxchg.h to exported userspace headers
  [IA64] Fix fast syscall version of getcpu()
  [IA64] Removed "task_size" element from thread_struct - it is now constant

Pull x86 reboot changes from Ingo Molnar:
 "The biggest change is a gentler method of rebooting/stopping via IRQs
  first and then via NMIs.  There are several cleanups in the tree as
  well."

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Update nonmi_ipi parameter
  x86/reboot: Use NMI to assist in shutting down if IRQ fails
  Revert "x86, reboot: Use NMI instead of REBOOT_VECTOR to stop cpus"
  x86/reboot: Clean up coding style
  x86/reboot: Reduce to a single DMI table for reboot quirks

Pull x86 platform changes from Ingo Molnar:
 "This tree includes assorted platform driver updates and a preparatory
  series for a platform with custom DMA remapping semantics (sta2x11 I/O
  hub)."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix number of CPUs when vsmp is disabled
  keyboard: Use BIOS Keyboard variable to set Numlock
  x86/olpc/xo1/sci: Report RTC wakeup events
  x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
  x86, platform: Initial support for sta2x11 I/O hub
  x86: Introduce CONFIG_X86_DMA_REMAP
  x86-32: Introduce CONFIG_X86_DEV_DMA_OPS

Pull x86 mm changes from Ingo Molnar:
 "This tree includes a micro-optimization that avoids cr3 switches
  during idling; it fixes corner cases and there's also small cleanups"

Fix up trivial context conflict with the percpu_xx -> this_cpu_xx
changes.

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix accounting in kernel_physical_mapping_init()
  x86/tlb: Clean up and unify TLB_FLUSH_ALL definition
  x86: Drop obsolete ARCH_BOOTMEM support
  x86, tlb: Switch cr3 in leave_mm() only when needed
  x86/mm: Fix the size calculation of mapping tables

Pull MCE updates from Ingo Molnar:
 "This tree updates/fixes MCE hardware support, it makes the APIC LVT
  thresholding interrupt optional because a subset of AMD F15h models
  don't support it."

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, MCE, AMD: Disable error thresholding bank 4 on some models
  x86, MCE, AMD: Hide interrupt_enable sysfs node
  x86, MCE, AMD: Make APIC LVT thresholding interrupt optional

Pull fpu state cleanups from Ingo Molnar:
 "This tree streamlines further aspects of FPU handling by eliminating
  the prepare_to_copy() complication and moving that logic to
  arch_dup_task_struct().

  It also fixes the FPU dumps in threaded core dumps, removes and old
  (and now invalid) assumption plus micro-optimizes the exit path by
  avoiding an FPU save for dead tasks."

Fixed up trivial add-add conflict in arch/sh/kernel/process.c that came
in because we now do the FPU handling in arch_dup_task_struct() rather
than the legacy (and now gone) prepare_to_copy().

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, fpu: drop the fpu state during thread exit
  x86, xsave: remove thread_has_fpu() bug check in __sanitize_i387_state()
  coredump: ensure the fpu state is flushed for proper multi-threaded core dump
  fork: move the real prepare_to_copy() users to arch_dup_task_struct()

Pull exception table generation updates from Ingo Molnar:
 "The biggest change here is to allow the build-time sorting of the
  exception table, to speed up booting.  This is achieved by the
  architecture enabling BUILDTIME_EXTABLE_SORT.  This option is enabled
  for x86 and MIPS currently.

  On x86 a number of fixes and changes were needed to allow build-time
  sorting of the exception table, in particular a relocation invariant
  exception table format was needed.  This required the abstracting out
  of exception table protocol and the removal of 20 years of accumulated
  assumptions about the x86 exception table format.

  While at it, this tree also cleans up various other aspects of
  exception handling, such as early(er) exception handling for
  rdmsr_safe() et al.

  All in one, as the result of these changes the x86 exception code is
  now pretty nice and modern.  As an added bonus any regressions in this
  code will be early and violent crashes, so if you see any of those,
  you'll know whom to blame!"

Fix up trivial conflicts in arch/{mips,x86}/Kconfig files due to nearby
modifications of other core architecture options.

* 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  Revert "x86, extable: Disable presorted exception table for now"
  scripts/sortextable: Handle relative entries, and other cleanups
  x86, extable: Switch to relative exception table entries
  x86, extable: Disable presorted exception table for now
  x86, extable: Add _ASM_EXTABLE_EX() macro
  x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/xsave.h
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/kvm_host.h
  x86, extable: Remove the now-unused __ASM_EX_SEC macros
  x86, extable: Remove open-coded exception table entries in arch/x86/xen/xen-asm_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/um/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/putuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/getuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/entry_64.S
  ...

Pull x86 EFI updates from Ingo Molnar:
 "This patchset makes changes to the bzImage EFI header, so that it can
  be signed with a secure boot signature tool.  It should not affect
  anyone who is not using the EFI self-boot feature in any way."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Fix NumberOfRvaAndSizes field in PE32 header for EFI_STUB
  x86, efi: Fix .text section overlapping image header for EFI_STUB
  x86, efi: Fix issue of overlapping .reloc section for EFI_STUB

Pull x86/urgent branch from Ingo Molnar:
 "These are the fixes left over from the very end of the v3.4
  stabilization cycle, plus one more fix."

Ugh.  Those KERN_CONT additions are just pointless.  I think they came
as a reaction to some of the early (broken) printk() work - but that was
fixed before it was merged.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, relocs: Build clean fix
  x86, printk: Add missing KERN_CONT to NMI selftest
  x86: Fix boot on Twinhead H12Y

Merge branches 'x86-asm-for-linus', 'x86-cleanups-for-linus', 'x86-cpu-for-linus', 'x86-debug-for-linus' and 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull initial trivial x86 stuff from Ingo Molnar.

Various random cleanups and trivial fixes.

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Eliminate dead ia32 syscall handlers

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pci-calgary_64.c: Remove obsoleted simple_strtoul() usage
  x86: Don't continue booting if we can't load the specified initrd
  x86: kernel/dumpstack.c simple_strtoul cleanup
  x86: kernel/check.c simple_strtoul cleanup
  debug: Add CONFIG_READABLE_ASM
  x86: spinlock.h: Remove REG_PTR_MODE

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cache_info: Fix setup of l2/l3 ids

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Avoid double stack traces with show_regs()

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: microcode_core.c simple_strtoul cleanup

Pull Hexagon architecture changes from Richard Kuo:
 "These are mostly cleanups and feedback remaining from the original
  upstreaming."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  various Kconfig cleanup and old platform build code removal
  hexagon/mm/vm_fault.c: Port OOM changes to do_page_fault
  arch/hexagon/kernel/dma.c: make function static
  Remove unneeded include of version.h from arch/hexagon/include/asm/spinlock_types.h
  Hexagon: Use resource_size function

Pull powerpc updates from Benjamin Herrenschmidt:
 "Here are the powerpc goodies for 3.5.  Main highlights are:

   - Support for the NX crypto engine in Power7+
   - A bunch of Anton goodness, including some micro optimization of our
     syscall entry on Power7
   - I converted a pile of our thermal control drivers to the new i2c
     APIs (essentially turning the old therm_pm72 into a proper set of
     windfarm drivers).  That's one more step toward removing the
     deprecated i2c APIs, there's still a few drivers to fix, but we are
     getting close
   - kexec/kdump support for 47x embedded cores

  The big missing thing here is no updates from Freescale.  Not sure
  what's up here, but with Kumar not working for them anymore things are
  a bit in a state of flux in that area."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc: Fix irq distribution
  Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
  powerpc: Fixing a cputhread code documentation
  powerpc/crypto: Enable the PFO-based encryption device
  powerpc/crypto: Build files for the nx device driver
  powerpc/crypto: debugfs routines and docs for the nx device driver
  powerpc/crypto: SHA512 hash routines for nx encryption
  powerpc/crypto: SHA256 hash routines for nx encryption
  powerpc/crypto: AES-XCBC mode routines for nx encryption
  powerpc/crypto: AES-GCM mode routines for nx encryption
  powerpc/crypto: AES-ECB mode routines for nx encryption
  powerpc/crypto: AES-CTR mode routines for nx encryption
  powerpc/crypto: AES-CCM mode routines for nx encryption
  powerpc/crypto: AES-CBC mode routines for nx encryption
  powerpc/crypto: nx driver code supporting nx encryption
  powerpc/pseries: Enable the PFO-based RNG accelerator
  powerpc/pseries/hwrng: PFO-based hwrng driver
  powerpc/pseries: Add PFO support to the VIO bus
  powerpc/pseries: Add pseries update notifier for OFDT prop changes
  powerpc/pseries: Add new hvcall constants to support PFO
  ...

Pull UML updates from Richard Weinberger:
 "Most changes are bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: missing checks of __put_user()/__get_user() return values
  um: stub_rt_sigsuspend isn't needed these days anymore
  um/x86: merge (and trim) 32- and 64-bit variants of ptrace.h
  irq: Remove irq_chip->release()
  um: Remove CONFIG_IRQ_RELEASE_METHOD
  um: Remove usage of irq_chip->release()
  um: Implement um_free_irq()
  um: Fix __swp_type()
  um: Implement a custom pte_same() function
  um: Add BUG() to do_ops()'s error path
  um: Remove unused variables
  um: bury unused _TIF_RESTORE_SIGMASK
  um: wrong sigmask saved in case of multiple sigframes
  um: add TIF_NOTIFY_RESUME
  um: ->restart_block.fn needs to be reset on sigreturn

Pull SuperH updates from Paul Mundt:
 - New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A)
 - New boards: RSK2+SH7264, RSK2+SH7269
 - Unbreaking kgdb for SMP
 - Consolidation of _32/_64 page fault handling.
 - watchdog and legacy DMA chainsawing, part 1
 - Conversion to evt2irq() hwirq lookup, to support relocation of
   vectored IRQs for irqdomains.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (98 commits)
  sh: intc: Kill off special reservation interface.
  sh: Enable PIO API for hp6xx and se770x.
  sh: Kill off machvec IRQ hinting.
  sh: dma: More legacy cpu dma chainsawing.
  sh: Kill off MAX_DMA_ADDRESS leftovers.
  sh: Tidy up some of the cpu legacy dma header mess.
  sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a.
  sh64: Fix up vmalloc fault range check.
  Revert "sh: Ensure fixmap and store queue space can co-exist."
  serial: sh-sci: Fix for port types without BRI interrupts.
  sh: legacy PCI evt2irq migration.
  sh: cpu dma evt2irq migration.
  sh: sh7763rdp evt2irq migration.
  sh: sdk7780 evt2irq migration.
  sh: migor evt2irq migration.
  sh: landisk evt2irq migration.
  sh: kfr2r09 evt2irq migration.
  sh: ecovec24 evt2irq migration.
  sh: ap325rxa evt2irq migration.
  sh: urquell evt2irq migration.
  ...

This reverts commit cb04ff9a ("sched, perf: Use a single
callback into the scheduler").

Before this change was introduced, the process switch worked
like this (wrt. to perf event schedule):

     schedule (prev, next)
       - schedule out all perf events for prev
       - switch to next
       - schedule in all perf events for current (next)

After the commit, the process switch looks like:

     schedule (prev, next)
       - schedule out all perf events for prev
       - schedule in all perf events for (next)
       - switch to next

The problem is, that after we schedule perf events in, the pmu
is enabled and we can receive events even before we make the
switch to next - so "current" still being prev process (event
SAMPLE data are filled based on the value of the "current"
process).

Thats exactly what we see for test__PERF_RECORD test. We receive
SAMPLES with PID of the process that our tracee is scheduled
from.

Discussed with Peter Zijlstra:

 > Bah!, yeah I guess reverting is the right thing for now. Sad
 > though.
 >
 > So by having the two hooks we have a black-spot between them
 > where we receive no events at all, this black-spot covers the
 > hand-over of current and we thus don't receive the 'wrong'
 > events.
 >
 > I rather liked we could do away with both that black-spot and
 > clean up the code a little, but apparently people rely on it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20120523111302.GC1638@m.brq.redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Ensure that we can't get randconfig breakage by doing the IRQ_DOMAIN
select automatically. Don't just do the select from REGMAP_IRQ to ensure
that the select actually gets noticed.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Pull dlm updates from David Teigland:
 "This set includes some minor fixes and improvements.  The one large
  patch addresses the special "nodir" mode, which has been a long
  neglected proof of concept, but with these fixes seems to be quite
  usable.  It allows the resource master to be assigned statically
  instead of dynamically, which can improve performance if there is
  little locality and most resources are shared."

* tag 'dlm-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: NULL dereference on failure in kmem_cache_create()
  gfs2: fix recovery during unmount
  dlm: fixes for nodir mode
  dlm: improve error and debug messages
  dlm: avoid unnecessary search in search_rsb
  dlm: limit rcom debug messages
  dlm: fix waiter recovery
  dlm: prevent connections during shutdown

Pull UBI and UBIFS updates from Artem Bityutskiy:

UBIFS:
   * Always support xattrs    (remove the Kconfig option)
   * Always support debugging (remove the Kconfig option)
   * A fix for a memory leak on error path
   * A number of clean-ups
UBI:
   * Always support debugging (remove the Kconfig option)
   * Remove "data type" hint support
   * Huge amount of renames to prepare for the fastmap wor
   * A lot of clean-ups

* tag 'upstream-3.5-rc1' of git://git.infradead.org/linux-ubifs: (54 commits)
  UBI: modify ubi_wl_flush function to clear work queue for a lnum
  UBI: introduce UBI_ALL constant
  UBI: add lnum and vol_id to struct ubi_work
  UBI: add volume id struct ubi_ainf_peb
  UBI: add in hex the value for UBI_INTERNAL_VOL_START to comment
  UBI: rename scan.c to attach.c
  UBI: remove scan.h
  UBI: rename UBI_SCAN_UNKNOWN_EC
  UBI: move and rename attach_by_scanning
  UBI: rename _init_scan functions
  UBI: amend comments after all the renamings
  UBI: rename ubi_scan_leb_slab
  UBI: rename ubi_scan_move_to_list
  UBI: rename ubi_scan_destroy_ai
  UBI: rename ubi_scan_get_free_peb
  UBI: rename ubi_scan_rm_volume
  UBI: rename ubi_scan_find_av
  UBI: rename ubi_scan_add_used
  UBI: remove unused function
  UBI: make ubi_scan_erase_peb static and rename
  ...

Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...

Pull HID subsystem updates from Jiri Kosina:
 "Apart from various driver updates and added support for a number of
  new devices (mostly multitouch ones, but not limited to), there is one
  change that is worth pointing out explicitly: creation of HID device
  groups and proper autoloading of hid-multitouch, implemented by Henrik
  Rydberg."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits)
  HID: wacom: fix build breakage without CONFIG_LEDS_CLASS
  HID: waltop: Extend barrel button fix
  HID: hyperv: Set the hid drvdata correctly
  HID: wacom: Unify speed setting
  HID: wacom: Add speed setting for Intuos4 WL
  HID: wacom: Move Graphire raport header check.
  HID: uclogic: Add support for UC-Logic TWHL850
  HID: explain the signed/unsigned handling in hid_add_field()
  HID: handle logical min/max signedness properly in parser
  HID: logitech: read all 32 bits of report type bitfield
  HID: wacom: Add LED selector control for Wacom Intuos4 WL
  HID: hid-multitouch: fix wrong protocol detection
  HID: wiimote: Fix IR data parser
  HID: wacom: Add tilt reporting for Intuos4 WL
  HID: multitouch: MT interface matching for Baanto
  HID: hid-multitouch: Only match MT interfaces
  HID: Create a common generic driver
  HID: hid-multitouch: Switch to device groups
  HID: Create a generic device group
  HID: Allow bus wildcard matching
  ...

Pull x86/apic changes from Ingo Molnar:
 "Most of the changes are about helping virtualized guest kernels
  achieve better performance."

Fix up trivial conflicts with the iommu updates to arch/x86/kernel/apic/io_apic.c

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Implement EIO micro-optimization
  x86/apic: Add apic->eoi_write() callback
  x86/apic: Use symbolic APIC_EOI_ACK
  x86/apic: Fix typo EIO_ACK -> EOI_ACK and document it
  x86/xen/apic: Add missing #include <xen/xen.h>
  x86/apic: Only compile local function if used with !CONFIG_GENERIC_PENDING_IRQ
  x86/apic: Fix UP boot crash
  x86: Conditionally update time when ack-ing pending irqs
  xen/apic: implement io apic read with hypercall
  Revert "xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries'"
  xen/x86: Implement x86_apic_ops
  x86/apic: Replace io_apic_ops with x86_io_apic_ops.

Pull scheduler changes from Ingo Molnar:
 "The biggest change is the cleanup/simplification of the load-balancer:
  instead of the current practice of architectures twiddling scheduler
  internal data structures and providing the scheduler domains in
  colorfully inconsistent ways, we now have generic scheduler code in
  kernel/sched/core.c:sched_init_numa() that looks at the architecture's
  node_distance() parameters and (while not fully trusting it) deducts a
  NUMA topology from it.

  This inevitably changes balancing behavior - hopefully for the better.

  There are various smaller optimizations, cleanups and fixlets as well"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug
  sched: Remove stale power aware scheduling remnants and dysfunctional knobs
  sched/debug: Fix printing large integers on 32-bit platforms
  sched/fair: Improve the ->group_imb logic
  sched/nohz: Fix rq->cpu_load[] calculations
  sched/numa: Don't scale the imbalance
  sched/fair: Revert sched-domain iteration breakage
  sched/x86: Rewrite set_cpu_sibling_map()
  sched/numa: Fix the new NUMA topology bits
  sched/numa: Rewrite the CONFIG_NUMA sched domain support
  sched/fair: Propagate 'struct lb_env' usage into find_busiest_group
  sched/fair: Add some serialization to the sched_domain load-balance walk
  sched/fair: Let minimally loaded cpu balance the group
  sched: Change rq->nr_running to unsigned int
  x86/numa: Check for nonsensical topologies on real hw as well
  x86/numa: Hard partition cpu topology masks on node boundaries
  x86/numa: Allow specifying node_distance() for numa=fake
  x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly
  sched: Update documentation and comments
  sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()

Pull perf changes from Ingo Molnar:
 "Lots of changes:

   - (much) improved assembly annotation support in perf report, with
     jump visualization, searching, navigation, visual output
     improvements and more.

    - kernel support for AMD IBS PMU hardware features.  Notably 'perf
      record -e cycles:p' and 'perf top -e cycles:p' should work without
      skid now, like PEBS does on the Intel side, because it takes
      advantage of IBS transparently.

    - the libtracevents library: it is the first step towards unifying
      tracing tooling and perf, and it also gives a tracing library for
      external tools like powertop to rely on.

    - infrastructure: various improvements and refactoring of the UI
      modules and related code

    - infrastructure: cleanup and simplification of the profiling
      targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.)

    - tons of robustness fixes all around

    - various ftrace updates: speedups, cleanups, robustness
      improvements.

    - typing 'make' in tools/ will now give you a menu of projects to
      build and a short help text to explain what each does.

    - ... and lots of other changes I forgot to list.

  The perf record make bzImage + perf report regression you reported
  should be fixed."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits)
  tracing: Remove kernel_lock annotations
  tracing: Fix initial buffer_size_kb state
  ring-buffer: Merge separate resize loops
  perf evsel: Create events initially disabled -- again
  perf tools: Split term type into value type and term type
  perf hists: Fix callchain ip printf format
  perf target: Add uses_mmap field
  ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
  ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
  ftrace: Make ftrace_modify_all_code() global for archs to use
  ftrace: Return record ip addr for ftrace_location()
  ftrace: Consolidate ftrace_location() and ftrace_text_reserved()
  ftrace: Speed up search by skipping pages by address
  ftrace: Remove extra helper functions
  ftrace: Sort all function addresses, not just per page
  tracing: change CPU ring buffer state from tracing_cpumask
  tracing: Check return value of tracing_dentry_percpu()
  ring-buffer: Reset head page before running self test
  ring-buffer: Add integrity check at end of iter read
  ring-buffer: Make addition of pages in ring buffer atomic
  ...

Pull cgroup updates from Tejun Heo:
 "cgroup file type addition / removal is updated so that file types are
  added and removed instead of individual files so that dynamic file
  type addition / removal can be implemented by cgroup and used by
  controllers.  blkio controller changes which will come through block
  tree are dependent on this.  Other changes include res_counter cleanup
  and disallowing kthread / PF_THREAD_BOUND threads to be attached to
  non-root cgroups.

  There's a reported bug with the file type addition / removal handling
  which can lead to oops on cgroup umount.  The issue is being looked
  into.  It shouldn't cause problems for most setups and isn't a
  security concern."

Fix up trivial conflict in Documentation/feature-removal-schedule.txt

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  res_counter: Account max_usage when calling res_counter_charge_nofail()
  res_counter: Merge res_counter_charge and res_counter_charge_nofail
  cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads
  cgroup: remove cgroup_subsys->populate()
  cgroup: get rid of populate for memcg
  cgroup: pass struct mem_cgroup instead of struct cgroup to socket memcg
  cgroup: make css->refcnt clearing on cgroup removal optional
  cgroup: use negative bias on css->refcnt to block css_tryget()
  cgroup: implement cgroup_rm_cftypes()
  cgroup: introduce struct cfent
  cgroup: relocate __d_cgrp() and __d_cft()
  cgroup: remove cgroup_add_file[s]()
  cgroup: convert memcg controller to the new cftype interface
  memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP
  cgroup: convert all non-memcg controllers to the new cftype interface
  cgroup: relocate cftype and cgroup_subsys definitions in controllers
  cgroup: merge cft_release_agent cftype array into the base files array
  cgroup: implement cgroup_add_cftypes() and friends
  cgroup: build list of all cgroups under a given cgroupfs_root
  cgroup: move cgroup_clear_directory() call out of cgroup_populate_dir()
  ...

Pull percpu updates from Tejun Heo:
 "Contains Alex Shi's three patches to remove percpu_xxx() which overlap
  with this_cpu_xxx().  There shouldn't be any functional change."

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove percpu_xxx() functions
  x86: replace percpu_xxx funcs with this_cpu_xxx
  net: replace percpu_xxx funcs with this_cpu_xxx or __this_cpu_xxx

Pull workqueue changes from Tejun Heo:
 "Nothing exciting.  Most are updates to debug stuff and related fixes.
  Two not-too-critical bugs are fixed - WARN_ON() triggering spurious
  during cpu offlining and unlikely lockdep related oops."

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  lockdep: fix oops in processing workqueue
  workqueue: skip nr_running sanity check in worker_enter_idle() if trustee is active
  workqueue: Catch more locking problems with flush_work()
  workqueue: change BUG_ON() to WARN_ON()
  trace: Remove unused workqueue tracer

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>

Commit d065bd81
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e05
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to hexagon.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>

This function is only used in the same file, and the other similar
functions in this file are also static.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[rkuo@codeaurora.org: adjusted patch to apply to latest]
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>

"make versioncheck" points out that arch/hexagon/include/asm/spinlock_types.h
does not need to include version.h .
A quick look at the file seems to confirm its findings, so here's a patch that
removes the include.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>

 Use resource_size function on resource object
 instead of explicit computation.

 The semantic patch that makes this change is available
 in scripts/coccinelle/api/resource_size.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...

Pull TTY updates from Greg Kroah-Hartman:
 "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge
  window.

  Nothing major in here, just lots of incremental changes from Alan and
  Jiri reworking some tty core things to behave better and to get a more
  solid grasp on some of the nasty tty locking issues.

  There are a few tty and serial driver updates in here as well.

  All of this has been in the linux-next releases for a while with no
  problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits)
  serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller.
  serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.
  serial: bfin_uart: narrow the reboot condition in DMA tx interrupt
  serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.
  Revert "serial_core: Update buffer overrun statistics."
  tty: hvc_xen: NULL dereference on allocation failure
  tty: Fix LED error return
  tty: Allow uart_register/unregister/register
  tty: move global ldisc idle waitqueue to the individual ldisc
  serial8250-em: Add DT support
  serial8250-em: clk_get() IS_ERR() error handling fix
  serial_core: Update buffer overrun statistics.
  tty: drop the pty lock during hangup
  cris: fix missing tty arg in wait_event_interruptible_tty call
  tty/amiserial: Add missing argument for tty_unlock()
  tty_lock: Localise the lock
  pty: Lock the devpts bits privately
  tty_lock: undo the old tty_lock use on the ctty
  serial8250-em: Emma Mobile UART driver V2
  Add missing call to uart_update_timeout()
  ...

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...

Pull Char/Misc patches from Greg Kroah-Hartman:
 "Here are a few various char/misc tree patches for the 3.5-rc1 merge
  window.

  Nothing major here at all, just different driver updates and some
  parport dead code removal.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  parport: remove unused dead code from lowlevel drivers
  xilinx_hwicap: reset XHI_MAX_RETRIES
  xilinx_hwicap: add support for virtex6 FPGAs
  Support M95040 SPI EEPROM
  misc: add support for bmp18x chips to the bmp085 driver
  misc: bmp085: add device tree properties
  misc: clean up bmp085 driver
  misc: do not mark exported functions __devexit
  misc: add missing __devexit_p() annotations
  pch_phub: delete duplicate definitions
  misc: Fix irq leak in max8997_muic_probe error path