- 30 Aug, 2013 2 commits
-
-
Phil Oester authored
In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
Currently we would still potentially suffer multicast packet loss if there is just either an IGMP or an MLD querier: For the former case, we would possibly drop IPv6 multicast packets, for the latter IPv4 ones. This is because we are currently assuming that if either an IGMP or MLD querier is present that the other one is present, too. This patch makes the behaviour and fix added in "bridge: disable snooping if there is no querier" (b00589af) to also work if there is either just an IGMP or an MLD querier on the link: It refines the deactivation of the snooping to be protocol specific by using separate timers for the snooped IGMP and MLD queries as well as separate timers for our internal IGMP and MLD queriers. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 29 Aug, 2013 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== This pull request fixes some issues that arise when 6in4 or 4in6 tunnels are used in combination with IPsec, all from Hannes Frederic Sowa and a null pointer dereference when queueing packets to the policy hold queue. 1) We might access the local error handler of the wrong address family if 6in4 or 4in6 tunnel is protected by ipsec. Fix this by addind a pointer to the correct local_error to xfrm_state_afinet. 2) Add a helper function to always refer to the correct interpretation of skb->sk. 3) Call skb_reset_inner_headers to record the position of the inner headers when adding a new one in various ipv6 tunnels. This is needed to identify the addresses where to send back errors in the xfrm layer. 4) Dereference inner ipv6 header if encapsulated to always call the right error handler. 5) Choose protocol family by skb protocol to not call the wrong xfrm{4,6}_local_error handler in case an ipv6 sockets is used in ipv4 mode. 6) Partly revert "xfrm: introduce helper for safe determination of mtu" because this introduced pmtu discovery problems. 7) Set skb->protocol on tcp, raw and ip6_append_data genereated skbs. We need this to get the correct mtu informations in xfrm. 8) Fix null pointer dereference in xdst_queue_output. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, simply use alloc_skb() and don't depend on any socket wmem space any longer. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris Clark authored
ipv4: raw_sendmsg: don't use header's destination address A sendto() regression was bisected and found to start with commit f8126f1d (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the constructed packet's destination address rather than the explicitly provided address. Fix this using FLOWI_FLAG_KNOWN_NH so that given nexthop is used. cf. commit 2ad5b9e4Reported-by:
Chris Clark <chris.clark@alcatel-lucent.com> Bisected-by:
Chris Clark <chris.clark@alcatel-lucent.com> Tested-by:
Chris Clark <chris.clark@alcatel-lucent.com> Suggested-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Chris Clark <chris.clark@alcatel-lucent.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Vagin authored
The zero value means that tsecr is not valid, so it's a special case. tsoffset is used to customize tcp_time_stamp for one socket. tsoffset is usually zero, it's used when a socket was moved from one host to another host. Currently this issue affects logic of tcp_rcv_rtt_measure_ts. Due to incorrect value of rcv_tsecr, tcp_rcv_rtt_measure_ts sets rto to TCP_RTO_MAX. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Vagin authored
u32 rcv_tstamp; /* timestamp of last received ACK */ Its value used in tcp_retransmit_timer, which closes socket if the last ack was received more then TCP_RTO_MAX ago. Currently rcv_tstamp is initialized to zero and if tcp_retransmit_timer is called before receiving a first ack, the connection is closed. This patch initializes rcv_tstamp to a timestamp, when a socket was restored. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 28 Aug, 2013 12 commits
-
-
Libo Chen authored
decrease device_node refcount np1 in err case. Signed-off-by:
Libo Chen <libo.chen@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rob Gardner authored
This patch adds another entry (HP hs2434 Mobile Broadband) to the list of exceptional devices that require a zero length packet in order to function properly. This list was added in commit 844e88f0. The hs2434 is manufactured by Sierra Wireless, who also produces the MC7710, which the ZLP exception list was created for in the first place. So hopefully it is just this one producer's devices that will need this workaround. Tested on a DM1-4310NR HP notebook, which does not function without this change. Signed-off-by:
Rob Gardner <robmatic@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eliezer Tamir authored
Add a cpu_relaxt to sk_busy_loop. Julie Cummings reported performance issues when hyperthreading is on. Arjan van de Ven observed that we should have a cpu_relax() in the busy poll loop. Reported-by:
Julie Cummings <julie.a.cummings@intel.com> Signed-off-by:
Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Byungho An authored
This patch fixed the pbl(programmable burst length) setting using DT. Even though the default pbl is 8, If there is no pbl property in device tree file, pbl is set 0 and it causes bandwidth degradation. Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
netlink dump operations take module as parameter to hold reference for entire netlink dump duration. Currently it holds ref only on genl module which is not correct when we use ops registered to genl from another module. Following patch adds module pointer to genl_ops so that netlink can hold ref count on it. CC: Jesse Gross <jesse@nicira.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
In case of genl-family with parallel ops off, dumpif() callback is expected to run under genl_lock, But commit def31174 (genl: Allow concurrent genl callbacks.) changed this behaviour where only first dumpit() op was called under genl-lock. For subsequent dump, only nlk->cb_lock was taken. Following patch fixes it by defining locked dumpit() and done() callback which takes care of genl-locking. CC: Jesse Gross <jesse@nicira.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
The net_device might be not set on the skb when we try refcounting. This leads to a null pointer dereference in xdst_queue_output(). It turned out that the refcount to the net_device is not needed after all. The dst_entry has a refcount to the net_device before we queue the skb, so it can't go away. Therefore we can remove the refcount on queueing to fix the null pointer dereference. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Ariel Elior authored
Since the PF gathers statistics for the VF, when the VF is about to unload we must synchronize the release of its statistics buffer with the PF, so that no DMA operation will be made to that address after the buffer release. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ariel Elior authored
Due to incorrect VF/PF conditions, when unloading a VF it will not release part of the memory it has previously allocated. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ariel Elior authored
The check on return code of bnx2x_vfop_config_vlan0() would lead to error handling flow as the return value indicating an existing pending ramrod would be erroneously considered as an error. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
If driver will fail to allocate all queues, it will shrink the number of queues and move the storage queue to its correct place (i.e., the last queue among the newly supported number). When changing the pointers of the new location of the FCoE queue, we need to pay special attention to the aggregations pointer - that memory is allocated during probe and released upon driver removal. Current implementation has 2 pointers pointing to the same chunk of allocated memory, meaning upon removal there will be two kfree() of the same chunk while the other won't be released. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ariel Elior authored
Solve issue where no stats were being collected for VF devices due to missing configuration in the stats' atomic synchronization mechanism. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Aug, 2013 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== This is one more set of fixes intended for the 3.11 stream... For the mac80211 bits, Johannes says: "I have three more patches for the 3.11 stream: Felix's fix for the fairly visible brcmsmac crash, a fix from Simon for an IBSS join bug I found and a fix for a channel context bug in IBSS I'd introduced." Along with those... Sujith Manoharan makes a minor change to not use a PLL hang workaroun for AR9550. This one-liner fixes a couple of bugs reported in the Red Hat bugzilla. Helmut Schaa addresses an ath9k_htc bug that mangles frame headers during Tx. This fix is small, tested by the bug reported and isolated to ath9k_htc. Stanislaw Gruszka reverts a recent iwl4965 change that broke rfkill notification to user space. Please let me know if there are problems! ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") netif_napi_add() produces an error message if a NAPI poll weight greater than 64 is requested. GELIC_NET_NAPI_WEIGHT is defined to GELIC_NET_RX_DESCRIPTORS, which is 128. Use the standard NAPI weight. v2: proper reference to the related commit Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") netif_napi_add() produces an error message if a NAPI poll weight greater than 64 is requested. Use the standard NAPI weight. v2: proper reference to the related commit Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") netif_napi_add() produces an error message if a NAPI poll weight greater than 64 is requested. jme requests a quarter of the rx ring size as the NAPI weight. jme's rx ring size is 1 << 9 = 512. Use the standard NAPI weight. v2: proper reference to the related commit Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Lutomirski authored
nsproxy.pid_ns is *not* the task's pid namespace. The name should clarify that. This makes it more obvious that setns on a pid namespace is weird -- it won't change the pid namespace shown in procfs. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Lutomirski authored
This is a security bug. The follow-up will fix nsproxy to discourage this type of issue from happening again. Cc: stable@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Aug, 2013 3 commits
-
-
Sarveshwar Bandi authored
In suspend-resume sequence, the OS could attempt to initialize the controller before it is ready, check for POST state before going ahead. Signed-off-by:
Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Currently we don't initialize skb->protocol when transmitting data via tcp, raw(with and without inclhdr) or udp+ufo or appending data directly to the socket transmit queue (via ip6_append_data). This needs to be done so that we can get the correct mtu in the xfrm layer. Setting of skb->protocol happens only in functions where we also have a transmitting socket and a new skb, so we don't overwrite old values. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Hannes Frederic Sowa authored
In commit 0ea9d5e3 ("xfrm: introduce helper for safe determination of mtu") I switched the determination of ipv4 mtus from dst_mtu to ip_skb_dst_mtu. This was an error because in case of IP_PMTUDISC_PROBE we fall back to the interface mtu, which is never correct for ipv4 ipsec. This patch partly reverts 0ea9d5e3 ("xfrm: introduce helper for safe determination of mtu"). Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
- 23 Aug, 2013 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ...
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
-
Richard Laager authored
The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by:
Richard Laager <rlaager@wiktel.com> Acked-by:
Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
The swapaccount kernel parameter without any values has been removed by commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Gergely Risko <gergely@risko.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vyacheslav Dubeyko authored
Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vyacheslav Dubeyko authored
Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Drake authored
Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac250415 ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by:
Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
stephen hemminger authored
IP sends device configuration (see inet_fill_link_af) as an array in the netlink information, but the indices in that array are not exposed to userspace through any current santized header file. It was available back in 2.6.32 (in /usr/include/linux/sysctl.h) but was broken by: commit 02291680 Author: Eric W. Biederman <ebiederm@xmission.com> Date: Sun Feb 14 03:25:51 2010 +0000 net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers Eric was solving the sysctl problem but then the indices were re-exposed by a later addition of devconf support for IPV4 commit 9f0f7272 Author: Thomas Graf <tgraf@infradead.org> Date: Tue Nov 16 04:32:48 2010 +0000 ipv4: AF_INET link address family Putting them in /usr/include/linux/ip.h seemed the logical match for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Duan Jiong authored
rfc 4861 says the Redirected Header option is optional, so the kernel should not drop the Redirect Message that has no Redirected Header option. In this patch, the function ip6_redirect_no_header() is introduced to deal with that condition. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org>
-
Sathya Perla authored
commit fba87559 ("disable TX in be_close()") disabled TX in be_close() to protect be_xmit() from touching freed up queues in the AER recovery flow. But, TX must be disabled *before* cleaning up TX completions in the close() path, not after. This allows be_tx_compl_clean() to free up all TX-req skbs that were notified to the HW. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 22 Aug, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller authored
Merge in a fix for RX MAC address filter programming bug in the sfc driver. Signed-off-by:
David S. Miller <davem@davemloft.net>
-